共查询到19条相似文献,搜索用时 437 毫秒
1.
介绍了一种无源光网络(PON)系统中测试用的光功率计,该功率计通过特殊设计的光路和电路结构来实现PON系统中对信号光功率测试的特殊要求,即要满足线路上3种光信号波长的同时测试、在线测试和1310nm信号的突发测试功能,从而大大方便PON系统的安装、管理和维护。 相似文献
2.
目前基于PON(无源光网络)技术的FTTx光接入网正在快速发展,光接入网的维护和管理面临着巨大的挑战,对高效的网络维护和管理手段尤其是业务验收及故障诊断的方法、工具的需要显得尤为迫切。文章从FTTx光接入网维护管理中需要解决的关键问题出发,简要分析了FTTx光接入网综合测试系统功能需求,并在此基础上提出了适合基于PON技术的FTTx光接入网测试架构方案。 相似文献
3.
无源光网络(PON)是依赖光功率分路器达到网络资源共享的一种网络结构,是目前光接入网(OAN)的一种传输体制。与有源光网络系统(SDH、PDH)相比,重要的实现了无源光分支,设备投资少,安装简单,运行维护费用低。其特有的测距技术,增减ONU站点方便,特别适应复杂地形的需要。PON系统根据接入链路要求由一个局端(OLT)和多个远端(ONU)以及无源光分配网(ODN)构成。 一、双向传输技术 在PON系统中,OLT与ONU的信号交换采用上行信号和下行信号予以解决的,OLT至ONU的下行信号的传输进程一般来说较为简单,通常采用… 相似文献
4.
PON带业务状态下带外OTDR测试方法 总被引:1,自引:0,他引:1
介绍了使用传统的OTDR对PON网络故障的测试,讨论了PON网络带业务状态下(in-service)的带外测试方法,对测试设备和网络设备分别与业务信号和测试信号的隔离度要求进行了分析,可实现在不影响正常业务情况下对PON网络的准确、可靠的维护测试,故障定位和业务恢复。 相似文献
5.
无源光网络(PON,Passive Optical Network)采用无源光分/合路器或光耦合器分配/汇聚各光网络单元(ONU,Optical Network Unit)信号的光接入网。PON系统系由光线路终端(OLT,Optical Line Terminal)、光分配网(ODN,Optical Distribution Network)、光网络单元(ONU)组成的信号传输系统,简称PON系统。目前主流PON综合接入系统根据采用的技术分为以太网无源光网络(EPON,Ethernet Passive Optical Network)和吉比特无源光网络(GPON,Gigabit-capable Passive Optical Networks)。 相似文献
6.
7.
8.
首先介绍了PON的系统配置和测试参考点定义,然后具体介绍了PON系统所特有的线路传输光接口、ODN的特性以及某些系统功能的测试验证方法。 相似文献
9.
10.
11.
12.
13.
14.
15.
《Optical Fiber Technology》2007,13(1):18-21
We propose and demonstrate employing inverse-return-to-zero (IRZ) downstream signal format to facilitate upstream data remodulation in a wavelength division multiplexing (WDM) passive optical network (PON) architecture with centralized light sources. The finite optical power in each downstream IRZ bit can be simply remodulated by the upstream data at the optical network unit. This can make each downstream and upstream pair share a single light source and such light reuse can be easily realized. An experiment on 10-Gb/s downstream IRZ signal generation, 2.5-Gb/s upstream signal remodulation, and two-way transmission is successfully demonstrated. The downstream/upstream signal performance in such a PON has also been analyzed, which is useful for system design. 相似文献
16.
17.
针对常用光功率计通道单一、测量过程复杂以及自动化程度较低等缺陷,设计了一种基于实时光栅衍射效率测量的双路光功率自动采集器。基于普通光功率计的理论和实际设计方法,提出设计方案。设计硬件方面包括前置放大电路、电源升压电路、A/D转换电路、单片机控制电路以及串口通信电路的设计。在软件方面完成了A/D转换控制程序以及数据传输、计算与存储程序的设计。设计采用633 nm作为测量的标准激光波长,测量功率范围在0.01~10 mW,设计完成后,光栅衍射效率测量精度保证在±4.5%。 相似文献
18.
Effects of Upstream Incoherent Crosstalk Caused by ASE Noise from Tx‐Disabled ONUs in XG‐PONs and TWDM‐PONs 下载免费PDF全文
A large incoherent crosstalk (IC) caused by amplified spontaneous emission (ASE) noise power from Tx‐disabled optical network units and a differential path loss has been shown to degrade upstream transmission performance in time‐division multiplexing passive optical networks. This paper considers the IC‐induced power penalty of an upstream signal both in an XG‐PON and in a TWDM‐PON. We investigate the degradation of the extinction ratio and relative intensity noise through a simulation and experiments. For the XG‐PON case, we observe a 9.6 dB difference in the level of ASE noise power from Tx‐disabled ONUs (hereafter known simply as ASE noise) between our result and the ITU‐T XG‐PON PMD recommendation. We propose an optical filtering method to mitigate an IC‐induced power penalty. In the TWDM‐PON case, the IC‐induced power penalty is naturally negligible because the ASE noise is filtered by a wavelength multiplexer at the optical line terminal. The results provide design guidelines for the level of ASE noise in both XG‐PONs and TWDM‐PONs. 相似文献
19.
基于光学微环的化学传感器 总被引:1,自引:1,他引:0
以SiN为材料,采用与CMOS工艺相兼容的技术,制备了波导宽度为1μm,半径为400μm的SiN光学微环。经测量,其品质因数(Q值)高达20 000,自由光谱范围(FSR)为0.5 nm。提出了采用光学微环传感器、单波长光源和光功率计对待测物进行测量的方案。实验证明,该方案与传统的采用光谱仪测量谐振峰值漂移的方法相比,可以取得更高的系统探测灵敏度。最后,利用微环传感器对葡萄糖溶液浓度进行测量,灵敏度高达10-4折射率单元(RIU),证明了该传感器可以应用于溶液检测领域。 相似文献