首页 | 官方网站   微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 93 毫秒
1.
肖静  张彬 《红外与激光工程》2012,41(4):1010-1016
红外光学系统直接暴露在外界热环境中,光学元件表面微粒污染的存在将降低红外光学系统的探测性能,严重时还可能会缩短其工作寿命。合理判断光学元件的污染容限并采取适当的镜面清洗及维护措施有利于红外光学系统的良好运行。介绍了红外光学系统中信噪比的计算方法,利用ASAP软件建立了典型红外光学系统的三维仿真模型,研究了信噪比随系统反射镜表面污染程度的变化规律,据此讨论了该红外光学系统中光学元件的污染容限,并分析了元件光学特性对光学元件信噪比的影响。研究结果表明,随着红外光学系统中光学元件表面污染程度的加重,系统信噪比将明显减低;当元件光学特性变差时,为保证低信噪比微弱信号的有效探测,必须严格控制光学元件表面污染微粒的覆盖率,使其表面洁净程度保持在更高的水平。  相似文献   

2.
元件(Component)是Delphi的核心,有了它用户能很轻松地开发出功能强大的Delphi应用程序。本文意在通过一个简单的例子向读者介绍如何创建并使用自己设计的元件。 一般来说,开发自己设计的元件要经过以下几步:元件设计、元件创建、为元件编写代码、在项目中使用此新元件(本文程序在Delphi3.0、4.0中通过)。  相似文献   

3.
尚涛  甘朝晖  余磊  左自辉 《微电子学》2022,52(3):399-405
根据分数阶记忆元件之间的转换关系,设计了一种分数阶记忆元件通用等效电路。该等效电路在不改变电路拓扑结构的情况下,通过选择五个阻抗元件的类型,可以将任意一种接地型分数阶记忆元件转换为任意一种浮地型分数阶记忆元件。在仿真实验中,根据提出的通用等效电路,分别实现了三种分数阶记忆元件。对三种分数阶记忆元件的特性进行了分析,验证了该等效电路的正确性。  相似文献   

4.
如何在Protel 99 SE中创建新的元件封装形式   总被引:1,自引:0,他引:1  
吴光升 《电子世界》2005,(12):30-31
上期我们已经介绍了如何在Protel 99 SE中创建新的元件外形,这是为绘制电路原理图服务的.如果我们要进行PCB制版,还需要在Protel 99 SE中创建新的元件封装形式,特别是ProtelPCB99 SE元件封装库的PCB Footprints.1ib中,元件封装形式的种类和品种太少,远不能满足业余条件下PCB制版的需求,而新的电子元器件不断涌现,所以很有必要在Protel 99 SE中创建新的元件封装库.  相似文献   

5.
<正> 1 引言 插装元件的减少以及表面贴装元件的小型化和精细化,推动了回流焊工艺的不断进步,目前已取代波峰焊成为一种主流焊接工艺。然而,并非所有的元件均适宜回流焊炉中的高温加热,在许多场合中,插装元件仍得到了较为广泛的应用,如在汽车工业中,继电器、连接器及一些在使用过程中需要承受较大机械应力的元件,仍需采用具有高结合强度的通孔型连接。常规的波峰焊可以实现插装元件  相似文献   

6.
石军 《电子世界》2001,(4):22-23
<正> 在使用Protel绘图时,自制元件是一个非常重要的环节。虽然Protel库文件提供了大量的原理图元件和印板图元件,但是在绘图时,从这些库文件中找到自己需要的元件,就是一件费时费力的事;就是利用元件库管理器的查找功能查找元件,查找的速度也不是很快。有的元件,Protel提供的库文件里根本就没有,另外,Protel库文件提供的原理图元件,引脚太长、图形太大,用这些元件绘制出的原理图非常松散,一点儿也不紧凑。还有,Protel库文件提供的原理图元件和印板图元件中,有的原理图元件的引脚和印板图元件的引脚没有对应起来,  相似文献   

7.
衍射光学元件已广泛应用于光学传感、光通信、计算成像、激光光束整形、生物医学、光学数据存储等领域。首先,总结归纳了基于标量衍射理论衍射光学元件在各个阶段的发展脉络,衍射光学元件的发展可分为菲涅耳波带片、全息图及相息图、二元光学元件及衍射光学元件四个阶段,针对各阶段衍射元件分别分析其设计原理、结构特点、加工难度、衍射效率及在现实中应用可能性。其次,对基于矢量衍射理论衍射光学元件进行概述。最后,对当前衍射光学元件在传统和新型成像系统及非成像系统中的应用进行总结,整理出当前衍射光学元件发展中存在问题并根据对应问题给出未来发展趋势的预测,能够对今后衍射光学元件的研究有一定指导意义。  相似文献   

8.
一、你知道Flash MX中的元件与实例吗 元件(Symbol)是指一种可以重复使用的图像、动画或按钮。实例(Instance)是指元件在舞台工作区的应用。元件存放在库面板中,而实例在舞台工作区中。Flash MX中有多种元件,它们的图标不一样,在电影中的作用也不同。元件中主要有三种元件,它们可以相互转换,但相同的内容具有不同的效果。  相似文献   

9.
电容端电压跃变条件分析   总被引:1,自引:0,他引:1  
动态元件由于具有存储能量的作用,因此在电路的结构或元件的参数发生变化和换路时,其端电压和端电流是不能突然改变的,在电路理论中这一性质可以表述为:当电容元件的初始电压为零或者电感元件的初始电流为零时,在换路的一瞬间,可以把电容元件看成一条短路线,把电感元件看成一个开路端(换路定理)。但是在某些特殊情况下换路定理并不成立,本文以电容元件为例,对此进行了分析。  相似文献   

10.
为了解决大规模超声阵列中压电元件电阻抗匹配难度增加的问题,提出一种多层的基于横向振动模式的压电元件构造方法。利用压电陶瓷具有多种振动模式的特性,将基于厚度振动模式工作的压电元件转换为基于横向振动模式工作,在此过程中,压电元件振动方向不变,电极面积增加,间距减小从而其固定电容增加,电阻抗降低。该文提出了一种双层结构模式转换压电元件的构造方法,结合仿真分析,设计了基于横向振动模式压电元件,不进行阻抗匹配,其电阻抗降至约50Ω。  相似文献   

11.
In this paper, a current-mode (CM) Kerwin–Huelsman–Newcomb (KHN) biquad is proposed. The circuit employs three differential-voltage current conveyors (DVCCs) as active elements together with two capacitors and four resistors as passive elements, which all are grounded. The circuit simultaneously provides the three basic filter functions, namely bandpass (BP), highpass (HP) and lowpass (LP) functions. The notch and allpass (AP) functions can be obtained by connecting appropriate output currents directly without using additional active elements. The output signals are obtained at high output impedance ports, which is important for easy cascading in CM operation. SPICE simulation results are given to verify the theoretical analyses.  相似文献   

12.
对磁场中对称结构的霍尔元件的输出特性进行研究,提出一种差分霍尔效应加速度测量方法。基于线性霍尔元件和圆柱形永磁体设计加速度测量模型,两个霍尔元件与磁体构成对称互补结构,以差分方式输出信号电压。建立加速度与输出电压的线性关系,实现以非接触的方式测量加速度。模型的对称互补式设计,减小了非线性因素对测量的影响,改善了输出线性度。差分式电压输出,能够抑制共模干扰和零点漂移,并提高了信号幅度。对模型进行线性模拟实验,实验结果符合理论结论。数据分析显示,测量方法具有较高灵敏度和线性度。  相似文献   

13.
针对压电智能结构在减振降噪领域的应用,基于NI 6343数据采集卡设计了一种无源10×衰减接口,扩大了输入电压范围,解决了基于NI 6343数采卡搭建压电测控实验系统的设计方案。该文首先分析建立了压电元件输出阻抗模型,在此基础上讨论了测试系统负载效应对压电元件输出电压的影响,最后设计了10×接口电路,并分析讨论了其幅频、相频特性。仿真和实验结果表明,所设计的10×接口可以用于直接测量采集的大多数压电元件的输出电压信号,且在1 000 Hz以内均有较高的幅值测量精度。  相似文献   

14.
Edge extraction from optical input patterns using parallel-connected AlGaAs-GaAs pn-pn optical switches is discussed. For a binary optical input pattern, an optical output pattern with emphasis on edge elements is obtained. The contrast ratio of the output between the edge and intermediate elements is 1.3:1. Thresholding characteristics of laser diodes are effective in enhancing the contrast ratio up to 5.2:1  相似文献   

15.
研究了基于倏逝波耦合的自组织相干合成激光阵列。应用静态本征模/超模理论推导阵列模式;通过数值方法考察阵列激光系统的动态特性进而分析输出功率的稳定性、阵列的扩展能力和阵列模式;并对两种方法得到的阵列模式进行了比较分析。结果表明:输出功率的稳定性以及输出功率的大小受阵列的锁相性能和阵元间的相位差影响;随着激光单元数目的增加,阵列总输出功率会非线性增大。通过跟踪各个阵元的相位变化并考察阵列模式的近场和远场特性,初步验证了37单元阵列的相干合成,随着阵元数目的增加,中心阵元与其邻近层阵元的振幅差会逐渐减小。  相似文献   

16.
Delay elements are widely used in mixed signal integrated circuits in order to meet design-specific timing requirements. Generally delays are generated by lengthening the transition times of the input signal which is subsequently restored. Slow transition times however, results in prolonged short-circuit current duration at the signal restoration stage, not only increasing the overall power consumption of the system but also limiting the usable output delay range. This paper presents a novel CMOS semi-static threshold-triggered delay element architecture that minimizes the short-circuit current over a wide output delay range. The architecture can also incorporate conventional delay elements to improve their performance. The presented delay element is fabricated in a commercial 0.35 μm CMOS technology and the measurement results show significant improvements in output delay range and average power consumption over other conventional delay elements.  相似文献   

17.
The development and application of vertical-cavity surface-emitting lasers (VCSELs) are summarized in this paper. The emphasis is focused on the high power single and 2-D arrays bottom-emitting VCSELs with a wavelength of 980nm. A distinguished device performance is achieved. The maximum continuous-wave (CW) output power of large aperture single devices with active diameters up to 500μm is as high as 1.95W at room temperature, which is to our knowledge the highest value reported for a single device. Size dependence of the output power, the threshold current and the differential resistance are discussed. A 16 elements array with 200μm aperture size (250μm center spacing) of individual elements shows a CW output power of 1.32W at room temperature.  相似文献   

18.
ATM (asynchronous transfer mode) is a new technique for transmitting voice, data and video. The performance of atm networks will depend on switch structure. Performance analysis of an atm switch based on a three-stage Clos network is presented. In this paper two types of switches are studied: a switch with input queues in the switching elements and a switch with output queues. This study is at the cell level and intends to dimension the switch. First, the traffic is supposed to be uniform, cells arrive on each input according to a geometric arrival process, they are uniformly directed over all the network outputs. An analytic model is proposed for both input and output queues in the switching elements. A study of the saturation throughput is proposed for input buffer switching elements. This work proves the influence of buffer dimensioning on the different stages of the switch. Dissymmetric switching elements are shown to be better than symmetric ones. A model is then designed for nonuniform traffic patterns and output buffers. Two types of non-uniform traffic are presented: single source to single destination (sssd) and multi-hot spots traffic (mhs). Discrete event simulations are used to validate the different models.  相似文献   

19.
The continuous-wave operation, thermal crosstalk measurements, and thermal modeling of a quantum cascade (QC) laser array are presented. Measurements and thermal modeling predict that the thermal crosstalk between array elements can be minimized by improving the heat management when the spacing of neighboring laser elements is greater than 500 mum. The output power of the demonstrated QC laser array significantly exceeds the output power of the individual lasers in the array. This shows the potential of the QC arrays as a candidate for the realization of high-power optical sources in mid-infrared (3-20 mum) spectral range  相似文献   

20.
红外系统中探测器盲元的存在降低了红外图像的质量和红外系统的性能。在红外焦平面阵列最终性能的测试评价中,盲元的判定主要有响应率判据、噪声判据和直流电平判据三种。本文研究了直流电平判据同其他两种盲元判据之间的关系:电平低于正常像元的盲元具有噪声高、响应低的特征;电平高于正常像元的盲元具有噪声低、响应低的特征。实际测试的数据验证了分析的结果,具有较高的判别准确率。电平判据在实现判别盲元的成因与类型的同时,亦可以推断出像元噪声和响应率的状态以及这两种判据的判别结果。在探测器的制造过程中,简单的判别准则有助于早期剔除不合格品;在系统应用中,可快速评估探测器的变化以及新增盲元的原因和特征。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号