共查询到20条相似文献,搜索用时 46 毫秒
1.
2.
根据自流装车管路系统中鹤管流量不同的工艺特点,建立了自流装车管路系统水力计算和装车时间计算的严格模型,讨论了自流装车管路系统水力计算的数值求解方法和基本思路,应用弦截法求解管路系统水力计算方程,求出在一定液位上集油管、鹤管段的流量。采用龙贝格数值积分法求解装车时间,应用VC 6.0高级语言编制了自流装车管路系统计算程序,应用该程序可快速进行工艺设计计算和模拟计算。计算表明:操作的鹤管数越多,各鹤管的流量差别就越大。 相似文献
3.
4.
5.
为优化非连续变形分析(Discontinuous Deformation Analysis for Rock Failure)中计算精度和计算时间的关系,文章提出了DDARF多尺度网格划分方法,分别建立了多尺度网格和均匀网格的单轴压缩模型,并进行了数值试验和室内试验的对比;将多尺度网格划分方法应用于大型地下洞室开挖,对洞室附近区域进行了针对性研究。结果表明:DDARF多尺度网格与均匀网格模型单轴压缩试验相比,网格数量相同时提高了裂隙附近的计算精度,裂隙扩展规律与室内试验更为吻合;多尺度网格划分方法应用于地下洞室的开挖,在相同计算精度下减少了计算时间,提高了效率,位移规律和FLAC计算结果吻合度较高;多尺度网格划分方法完善并加强了DDARF模拟岩体裂隙扩展的功能,对大型岩土工程稳定性的优化分析具有重要的实用意义。 相似文献
6.
7.
8.
9.
10.
本文基于旅客出行时间特征,将跨线列车划分为日间动车组、跨夜动车组、日间普通旅客列车、跨夜普通旅客列车等四类。结合跨线列车的定义,推导出跨线列车的适应性条件,确定其影响因素为线上运行时间、线下运行时间、全程旅行时间。跨线列车的适应性条件可以确定跨线列车的种类、初始跨线时间域。结合跨线列车的始发终到时间域、跨线时间域,推导出跨线列车的合理始发终到时间范围、合理跨线时间范围的计算方法,并实例求解了川藏铁路跨线列车的合理跨线时间范围,验证了跨线列车的适应性判别条件、合理始发终到时间范围、合理跨线时间范围求解方法的可行性与正确性。研究结论可以为川藏铁路列车运行图的铺画、分时段客货共线的研究提供参考。 相似文献
11.
Pedestrians as compared to vehicular traffic enjoy a high degree freedom of movement even in heavily congested areas. Consequently, there are more alternative links available to pedestrians between a given origin‐destination (O‐D) pair. This paper describes a study done by the University of Calgary to evaluate the factors affecting the choice of route on intra‐CBD trips or trips within the Central Business District (CBD). An origin destination survey conducted in downtown Calgary, Alberta enabled the identification of the most significant factors influencing the choice. These factors were analyzed in relation to the physical characteristics of the location, personal characteristics of the trip maker and the type of the trip. It appears that most people chose the shortest link and factors such as the level of congestion, safety or visual attractions were only secondary. This suggests that the length should be made a major consideration when planning and designing pedestrian links. 相似文献
12.
This paper estimates the efficiencies and productivity changes of 12 international airports in the Asia-Pacific region based on data from 1998 to 2006. We apply stochastic frontier analysis (SFA) to compute efficiency estimates and use the Malmquist productivity index (MPI) to analyze productivity changes. We use the SFA model with a translog-type production function after testing the statistical hypotheses. According to the results of the SFA hypothesis tests, airports have experienced a technological regression; the deviations from the efficiency frontier are caused more by technical inefficiency than random noise. However, the inefficiency was found to decrease. The MPI reveals a declining trend resulting more from technological change than from efficiency change, with a decrease in inefficiency. Taken together, both the hypothesis tests and the MPI not only provide consistent conclusions, but also suggest that airports should concentrate on technological progress. 相似文献
13.
14.
15.
介绍了城市轨道交通工程中杂散电流不同的监测系统的构成,分析了集中式、分散式和智能型等监测系统的配置和功能,以及智能型实时在线监测系统的重要意义,为轨道交通工程杂散电流监测系统的选择与应用提供参考。 相似文献
16.
明确埋地管道防腐保温层的技术评价标准,对埋地钢质管道的安全运行,延长管道使用寿命具有重要意义。为了对埋地管道防腐保温层做出有效评价,从间接检测与开挖检测2个方面,结合现场检测数据,提出了基于防腐保温层的电流衰减率、绝缘电阻率、质量状况与厚度的分级评价标准及基于4种评价指标的综合评判方法。工程实践表明,该评价标准对防腐保温层是否存在失效能做出有效判断。 相似文献
17.
天然气自动计量系统有多种组态软件,由于软件的不相通性,造成了计量系统数据采集的通用性差、数据传输与入库的时效性差、数据利用的可靠性低.结合各组态软件的实际情况,从设计上充分利用Oracle大数据处理能力以及Partition(分区表)的特性,实现历史数据的存储,应用WebService与COM+数据访问组件提供多层数据访问架构,采用OPC与DDE工业数据交换协议,实现了各站场计量数据的实时上传,为连续数据采集和实时监控提供了可能,节约了改造成本. 相似文献
18.
19.
Joseph N. Prashker 《Transportation》1979,8(4):329-346
Reliability of travel modes was found to be the most important characteristic of transportation systems in several attitudinal investigations of individual travel behavior. This paper represents the first part of a research effort aimed at gaining a better understanding of the characteristics of reliability of transportation modes in urban travel. In this research, reliability characteristics are identified; their importance relative to each other is assessed, and an insight into possible structure of an objective reliability index is discussed. The research is based on perceived values of reliability, which were identified through a large attitudinal survey conducted in the Chicago metropolitan area. 相似文献