Simulation experiments for evolution of fatty acids in immature source rocks

The anhydrous, hydrous and bitumen-extrac- ted simulations were carried out for the immature source rocks from the Liaohe sag. It has been shown from the result that with increasing temperature in simulation experiments, the fatty acids content decreased at first and then increased. The decrease of fatty acids in immature rocks is presumably related to alkanes generation in immature oils, whilst the increase may be related to the fact that some additional fatty acids are generated from kerogen and the tightly bound fatty acids in kerogen are released as bound fatty acids in kerogen and unbound fatty acids in bitumen. The fact that the bitumen generated from kerogen contains fatty acids has demonstrated that some bound and tightly bound fatty acids in kerogen can be transferred into bitumen. The preferential fatty acids in the immature source rocks are found to be mono-carboxylic acids with longer chains, whilst krogen contains relatively more di-carboxylic acids. It has been found that the fatty acids in immature source rocks can be changed from that with more longer chains to that with more shorter chains when evolution extent has been increased. Based on simulation results and the fact that the majority of fatty acids in immature oils are those with longer chains, it is inferred that the contribution of fatty acids to forming alkanes in immature oils mainly takes place at the evolution stage with R₀ <0.6%. The simulation experiments have also demonstrated that H₂O could promote the generation of fatty acids with more di-carboxylic acids and delay alkanes formation from fatty acids.     

The occurrence and significance of C25HBI in Cenozoic saline lacustrine source rocks from the Western Qaidam Basin,NW China

The saline lacustrine deposit of the Oligocene Lower Ganchaigou Formation is the main source rock for the Western Qaidam Basin,NW China.In this study,abundant highly branched isoprenoids with 25 carbon atoms (C25HBI) were detected in the upper section of the Lower Ganchaigou Formation.C25HBI is a biomarker for diatoms,and can provide information regarding biogeochemical processes during production and preservation of sedimentary organic matter.The carbon isotopic values of C25HBI in these source rocks were in the range of-18‰ to-20‰.The relative enrichment in 13C of C25HBI suggests that these isoprenoids were derived from diatom blooms.In this case,the diatoms used HCO3-as an additional carbon source to dissolved CO2 in water column due to their high biological productivity.Conversely,the diatom blooms indicated an abundant nutrient supply to the environment and high primary productivity.Thus,the occurrence of 13C-enriched C25HBI could be an ideal marker for good source rocks.The decreased concentration of CO2(aq) in the water column induced by diatom blooms can result in an enrichment in 13C of organic matter synthesized by primary producers.This may be a possible reason for the occurrence of 13C-enriched organic matter in the Cenozoic source rocks of the Western Qaidam Basin.Previous studies have shown that the high carbon number n-alkanes sourced from diatoms have no carbon preference.Hence,the sources of n-alkanes in regional source rocks are complex,and should be considered when discussing the sources of organic matter in future studies.     

The comparison of biomarkers released by hydropyrolysis and Soxhlet extraction from source rocks of different maturities

The Permian Dalong Formation(P2d) source rocks from the mature Guangyuan outcrop section and the overmature Wangcang outcrop section in Sichuan Basin were selected.The Soxhlet extraction and kerogen catalytic HyPy were conducted on the P2d source rocks.The biomarkers obtained by both methods were compared to discuss their difference and the influence extent of thermal maturation on covalently bound biomarkers.The results show that covalently bound biomarkers can hardly be correlated to the corresponding free biomarkers due to severe thermal alterations and/or interference of migrated hydrocarbons in both outcrop sections and thermal maturation have much lower influence on covalently bound biomarkers in kerogens than on free biomarkers in Soxhlet extracts.The application of HyPy in study of biomarker geochemistry can reduce the thermal maturation effect on biomarkers(Ro≤2.4%) to a greater extent and the interference of migrated hydrocarbons between interbedded layers.The covalently bound biomarkers released by HyPy are useful in the study of biomarker geochemistry and oil-source correlation on high-overmature source rocks.     

Identification of the Kukersite-type source rocks in the Ordovician Stratigraphy from the Tarim Basin, NW China

Due to the importance of the Gloeocapsomorpha Prisca （G. prisca）-enriched source rocks, which belong to Kukersite-type source rocks in the Lower Paleozoic Ordovician strata, it has received great attentions during the petroleum exploration as to whether there are the Kukersite-type source rocks developed in the major hydrocarbon source strata of the Upper and Middle Ordovician in the Tarim Basin. Using pyrolysis-gas chromatography-mass spectrography to analyse kerogens from source rocks in the lime- mud mound with moderate maturity, study reveals that there are the Kukersite-type source rocks in the Ordovician strata of the Tarim Basin. The pyrolysis products showed a low content of 〉n-C19 normal alkanes with a significant odd-even predominance between n-C13 and n-Cl7, long-chain alky substituted alkylbenzene and alkylthiophene isomers and distinctive distribution of 5-N- alkyl-1, 3-Benzenediol and its homologous. Based on the geographic environment characteristics of G. Prisca, the molecular dis- tributions of crude oil from the Lower Paleozoic petroleum systems in the Tarim Basin and characteristics of kerogen pyrolysis products from the Middle and Upper Ordovician source rocks, the results suggested that it is less possible to develop the G. Pris- ca-enriched Kukersite-type source rocks in the major hydrocarbon source rocks in the Middle and Upper Ordovician strata in the Tarim Basin. However, the benthic macroalga and planktonic algae-enriched source rocks are the main contributors.     

The occurrence of fatty acids in immature source rocks and their distribution characteristics

The fatty acids in extractable bitumen and kerogen of immature source rocks of the Liaohe Basin and Jiyang sag were investigated in this study. The result showed that the bitumen fatty acids were mainly associated with non-hydrocarbon fraction and that the kerogen fatty acids with some tightly bound fatty acids were mainly bounded in a net structure of kerogen by ester bonds. For the investigated source rocks, the fatty acids in bitumen, bound fatty acids and tightly bound acids in kerogen ranged in 0.01%—0.073.9%, 0.005%— 0.045 5% and 0.005%— 0.010% respectively. Among the fatty acids analyzed in this study, mono-carboxylic acids, a , w -di-carboxylic acids and hydroxy acids accounted for 70%—100%, 0%—30% and <10% respectively. It was also found that the mono-carboxylic acids with longer chains mainly existed in bitumen, and that the a , w -di-carboxylic acids and hydroxy acids mainly existed in kerogen. From above, it was assumed that the mono-car- boxylic acids in bitumen might have played an important role in the hydrocarbon generation from fatty acids in immature source rocks.     

Kinetic study of the hydrocarbon generation from marine carbonate source rocks characterization of products of gas and liquid hydrocarbon

The kinetic parameters of hydrocarbon generation from the marine carbonate source rocks were determined and calibrated through kinetic simulating experiment. The kinetic parameters of hydrocarbon generation then were extrapolated to geological condition by using the relative software. The result shows that gaseous hydrocarbons (C_1, C_2, C_3, C_(4-5)) were generated in condition of 150℃相似文献   

Compression behavior and equation of state of Ni77P23 amorphous alloy

The compression behavior of Ni77P23 amorphous alloy is investigated at room temperature in a diamond-anvil cell instrument using insitu high pressure energy dispersive X-ray diffraction with a syn- chrotron radiation source. The equation of state is determined by fitting the experimental data accord- ing to Birch-Murnaghan equation: -ΔV/V0=0.08606P-3.2×10-4P2 5.7×10-6P3. It is found that the structure of Ni77P23 amorphous alloy is stable under pressures up to 30.5 GPa.     

Adakite-type sodium-rich rocks in Awulale Mountain of west Tianshan: Significance for the vertical growth of continental crust

The sodium-rich dacites and albite porphyries of Permian in the Awulale Mountain of west Tianshan have unique chemical and trace element signatures identical to adakite. These intermediate-acidic igneous rocks are characterized by high Na2O, Al₂O₃ and Sr contents and high Sr/Y and La/Y ratios (＞40 and ＞20, respectively), and low Y and Yb contents, and strong depletion in HREE, and positive Eu anomaly. The (^{143Nd/₁₄₄Nd)_i} is in the range from 0.51236 to 0.51248 and the e_Nd(t) is positive value (+0.79—+3.11); the (⁸⁷Sr/⁸⁶Sr)^_i is in the range from 0.7052 to 0.7054. These Nd and Sr isotopic composition features indicate that the source rocks of these adakite-type rocks are from a weakly depleted mantle, or a depleted mantle, but was contaminated by the crustal materials. These adakite-type rocks were most likely derived from the partial melting of new underplated basaltic rocks under the conditions of amphibolite to eclogite transition in the postcollisional environment of North Xinjiang during the Permian Period. They are not only the Phanerozoic juvenile crust materials, but also are probably animportant symbol of the underplating of mantle- derived basaltic magmas and the vertical growth of continental crust in the west Tianshan area during the postcollision of Late Paleozoic.     

Mg-Zn-Ce非晶合金力学与耐蚀性能的研究

镁合金作为生物可降解材料具有很多优势,但传统多晶镁合金腐蚀速率过快的问题限制了其更广泛的应用。与多晶镁合金相比,非晶态镁合金因具有独特的无定形结构,使其耐腐蚀能力比多晶镁合金的要好。采用铜辊甩带法制备得到了新型Mg_70−xZn₃₀Ce_x（x=2, 4, 6和8）非晶镁合金,并对其进行了力学性能和耐腐蚀性能的研究。结果表明：x为4和6时,Mg-Zn-Ce非晶合金的非晶形成能力最好;Ce的添加可以有效改善镁基非晶合金的脆性,使其弹性模量低于60 MPa,与人骨相似,从而能有效避免植入后因弹性模量过大导致的应力遮蔽效应的产生;同时,Ce的添加显著地提高了合金的耐腐蚀性,使其开路电位达到-0.2 V,腐蚀电流密度低至10^-6 A/cm²。     

Groundbreaking gas source rock correlation research based on the application of a new experimental approach for adsorbed gas

Many years of experimentation have led to the development and improvement of equipment and methods used to make gas source rock correlations.By crushing samples using a ball mill and directly collecting adsorbed gases in the absence of aqueous media under high vacuum conditions,most possible interference factors,such as atmospheric pollution,crushing-induced pyrolysis,and gas collection by aqueous media are eliminated.This greatly enhances the volume percentage of hydrocarbon gas in the acquired adsorbed gases,with maxima up to more than 80%.The actual measurement of carbon isotopic series can be carried out to such an extent as to be δ13C1-δ13C5.A preliminary study using newly established equipment and methods has indicated the following.(1) The carbon isotopic composition of ethane in adsorbed gases on hydrocarbon source rocks can be used to distinguish the types of source rocks.This is consistent with results obtained by using organic geochemical parameters for source rocks,and illustrates that it is highly feasible to use the carbon isotopic composition of ethane in natural gases as a parameter for distinguishing the types of source rocks.(2) The thermal evolution degree(Ro) of hydrocarbon-source rocks calculated in terms of the carbon isotopic composition of methane in adsorbed gases on hydrocarbon source rocks agrees well with the vitrinite reflectance actually measured in the source rocks.This confirms the reliability of the relationship between the carbon isotopic composition of methane in natural gases and the thermal evolution degree determined using statistics.(3) Finally,a direct gas source correlation method for natural gases has been established,and the expression of log Ro vs.δ13C1 established in terms of actually measured δ13C1 values of methane in absorbed gases.Ro values of hydrocarbon source rocks have been established as well,thus creating favorable conditions for precise oil-and-gas source correlations in exploration areas.