Performance of equalization techniques in a radio interferenceenvironment

The performance of equalization techniques for digital radio systems in the presence of sinusoidal and modulated interference signals is investigated. Linear and nonlinear equalizers, as well as synchronous and T/2-spaced structures, are considered. It is shown that synchronous decision-feedback equalizers are powerful countermeasure devices for radio channels affected by both selective fading and sinusoidal interferers, and that both T/2-spaced linear and nonlinear equalizers can provide a significant improvement of the adjacent channel interference margin, whether the channel is selective or not, especially in the case of multicarrier interleaved frequency arrangements     

Optimization of signal sets for partial-response channels. II.Asymptotic coding gain

For Pt. I see ibid., vol.37, no.5, p.1327-141 (1991). For a linear, time-invariant, discrete-time channel with a given transfer function H(f), and information rate R bits/ T, where T is the symbol interval, an optimal signal set of length K is defined to be a set of 2^RK inputs of length K that maximizes the minimum l₂ distance between pairs of outputs. The author studies the minimum distance between outputs, or equivalently, the coding gain of optimal signal sets as K→∞. He shows how to estimate the coding gain, relative to single-step detection, of an optimal signal set length K when K is large     

Limiter-discriminator detection of a coherent optical heterodyneM-ary CPFSK receiver

The performance of a coherent optical M-ary continuous-phase frequency-shift-keying (CPFSK) receiver using limiter-discriminator (L-D) detection is investigated. It is shown that L-D detection of CPFSK optical signals offers the best performance for a large normalized IF beat spectral linewidth, ΔνT. When the modulation index is unity, the receiver is immune to laser phase noise and can produce (M/4) exp (-SNR) symbol error probability, which may be considered as the upper bound if the optimal modulation index is used (SNR is the signal-to-noise ratio per symbol). Optimum modulation indexes are 0.8 and 1 at ΔνT=1% and ΔνT=2%, respectively, for M=4, 8, and 16     

Adjacent channel and cochannel interferences in CPFSK systems withnonlinear transmitters and limiter-discriminator detection

The performance of continuous-phase FSK (frequency-shift keying) systems with rectangular modulation pulse shaping and limiter-discriminator detection is analytically evaluated in the presence of transmission nonlinearities as well as adjacent channel and cochannel interference. Consideration of modulation pulses with length τ, shorter than symbol time, T, is investigated. The algorithm developed to evaluate bit-error probability shows that the choice τ/T=1, and even more so in the presence of adjacent channel interference. Moreover, for τ/T=0.5, numerical results are reported that describe system performance under different working conditions and can be used to develop design criteria     

Error probability of M-ary FSK with differential phasedetection in satellite mobile channel

Formulas are derived for the error probability of M-ary frequency shift keying (FSK) with differential phase detection in a satellite mobile channel. The received signal in this channel is composed of a specular signal, a diffuse signal, and white Gaussian noise; hence, the composite signal is fading and has a Rician envelope. The error probability is shown to depend on the following system parameters: (1) the signal-to-noise ratio; (2) the ratio of powers in the specular and diffuse signal components; (3) the normalized frequency deviation; (4) the normalized Doppler frequency; (5) the maximum normalized Doppler frequency; (6) the correlation function of the diffuse component, which depends on the normalized Doppler frequency and the type of the antenna; (7) the number of symbols; and (8) the normalized time delay between the specular and diffuse component (t _d/T) where 1/T is the symbol rate. Except for T_d/T, all normalized parameters are the ratios of the parameter value and symbol rate. The Doppler frequency depends on the velocity of the vehicle and the carrier frequency. The error probability is computed as a function of the various parameters. The bit error probability is plotted as a function of signal-to-noise ratio per bit and other system parameters     

The bandwidth performance of a two-element adaptive array withtapped delay-line processing

The bandwidth performance of a two-element adaptive array with a tapped delay line behind each element is examined. It is shown how the number of taps and the delay between taps affect the bandwidth performance of the array. An array with two weights and one delay behind each element is found to yield optimal performance (equal to that obtained with continuous-wave interference) for any value of intertap delay between zero and T₉₀/B, where T ₉₀ is a quarter-wavelength delay time and B is the fractional signal bandwidth. Delays less that T₉₀ yield optimal performance but result in large array weights. Delays larger than T₉₀/B yield suboptimal signal-to-interference-plus-noise ratio when each element has only two weights. For delays between T₉₀/B and 4T₉₀/B , the performance is suboptimal with only two taps but approaches the optimal if more taps are added to each element. Delays larger than T₉₀/B result in suboptimal performance regardless of the number of taps used     

A new extrapolation algorithm for band-limited signals using theregularization method

The ill-posedness of the extrapolation problem in the presence of noise is considered. A stable algorithm is constructed by solving a Fredholm equation based on a regularization method. The algorithm appears relatively robust, since the noise η_δ(t ) is taken as a function in L²[-T,T](T>0) such that the error energy ∫|η_δ(t)|² dt⩽δ², where integration is from - T to T, and the constructed extrapolation uniformly converges to the desired signal over (-∞, +∞) as δ→0. An estimate for the error energy of the constructed extrapolation over (-∞, +∞) and for the absolute error between the constructed extrapolation and the desired signal over (-∞, +∞) are presented     

Error performance of a digitally processed binary ESK frequencyhopping receiver in the presence of large Doppler

Analysis is made of the effects of Doppler on the error rate performance of a low data rate binary FSK frequency hopping receiver, employing a discrete Fourier transform (DFT) technique for baseband detection. Bit detection decision is made by locating the maximum of the DFT outputs which, in the frequency domain, are assumed to be separated by 1/T where T is the bit period. Both the worst case and average error performances are obtained and presented as a function of E_b/N₀ for various values of M where E_b/N₀ is the signal bit energy-to-noise density ratio and M is the degree of freedom associated with the Doppler uncertainty window. The E _b/N₀ degradation as a function of M is also presented     

Bounds on maximum throughput for digital communications withfinite-precision and amplitude constraints

The problem of finding the maximum achievable data rate over a linear time-invariant channel is considered under constraints different from those typically assumed. The limiting factor is taken to be the accuracy with which the receiver can measure the channel output. More precisely, the following problem is considered. Given a channel with known impulse response h(t), a transmitter with an output amplitude constraint, and a receiver that can distinguish between two signals only if they are separated in amplitude at some time t ₀ by at least some small positive constant d, what is the maximum number of messages, N_max, that can be transmitted in a given time interval [0,T]? Lower bounds on N_max can be easily computed by constructing a particular set of inputs to the channel. The main result is an upper bound on N_max for arbitrary h(t). The upper bound depends on the spread of h(t), which is the maximum range of values the channel output may take at some time t₀>0 given that the output takes on a particular value α at time t=0. Numerical results are shown for different impulse responses, including two simulated telephone subscriber loop impulse responses     

Spectral efficiency of optical FDM systems impaired by phase noise

The required frequency spacings between channels in an optical frequency division multiplexing (FDM) network are considered. The minimum permissible spacings consistent with meeting bit error rate (BER) objectives are derived. The assumed transmission uses on-off keying (OOK), at a data rate 1/T (in bits per second), via external modulation of a laser source having linewidth β (in hertz). The assumed receiver consists of an optical channel selection filter followed by a p-i-n photodiode and a postdetection integrate-and-dump circuit. The analysis estimates the adjacent channel interference (ACI)-induced floor on BER for the middle of three FDM channels, as a function of frequency spacing and linewidth-to-bit rate ratio (βT). For BER=10^-9 and βT ranging from 0.32 to 5.12, the required channel spacing ranges from 5.2 to 27.5 bit rates. The multiplying factors associated with using (wide-deviation) frequency shift keying (FSK), coherent (heterodyne) detection, and infinitely many FDM channels, respectively, are estimated to be 2.0, at most 3.0, and at most 1.37     

A storage-efficient method for solving banded Toeplitz systems

A method is presented for solving the banded Toeplitz system Tx=y by decomposing T into its asymptotic upper and lower triangular factors (which are banded and Toeplitz) and a rank-p correction matrix, where p is the bandwidth of T. This way of representing T requires only O(p²) words of storage and allows computation of x in O(2Np) operations. A similar method is presented for the case in which T is bi-infinite and y is zero outside a finite region     

On optimal signal sets for digital communications with finiteprecision and amplitude constraints

The maximum data rate that can be reliably communicated given a linear, time-invariant, dispersive channel, a receiver that samples the channel output to within an accuracy of ±d where d >0, and a transmitter with an output amplitude constraint is evaluated. For any dispersive channel the maximum rate depends on d and is finite. The transmitted waveforms must be designed so that two channel outputs associated with two distinct transmitted signals are separated in amplitude at a particular time by d. It is shown that given any channel impulse response with rational Laplace transform, there exists an optimal sets of inputs that are ±A everywhere where A is the maximum allowable amplitude. Furthermore, in any finite time interval, each input changes sign a finite number of times. If the channel impulse response is a single decaying exponential, it is shown that simple binary signaling, in which A or -A, depending on the current message bit, is transmitted during each symbol interval, maximizes the data rate     

Convergence and steady-state behavior of a phase-splittingfractionally spaced equalizer

The eigenstructure, the initial convergence, and the steady-state behavior of a phase-splitting fractionally spaced equalizer (PS-FSE) are analyzed. It is shown that the initial convergence rate of a T/3 or, in general, a T/M, PS-FSE employing the least-mean-square (LMS) stochastic gradient adaptive algorithm is half that of a symbol rate equalizer (SRE) or a complex fractionally spaced equalizer (CFSE) with the same time span. It is also shown that the LMS adaptive PS-FSE with symbol rate update converges to a Hilbert transformer followed by a matched filter in cascade with an optimal SRE, and thus forms an optional receiver structure. The LMS PS-FSE is computationally more efficient and introduces less system delay than the CFSE     

On linear inductance- and capacitance-time conversions usingNIC-type configurations

The problem of linear inductance- and capacitance-time (L/T, C/T) conversion is approached through the systematic study of four approaches to building astable multivibrators using piecewise linear resistances obtained from one operational amplifier (OA) negative impedance converter (NIC) configuration. A new L/T converter with grounded inductance is found. Formulas for the time period taking into consideration the losses as well as the OA saturation output resistance are derived     

A multiple scattering solution for the effective permittivity of asphere mixture

A recursive algorithm for calculating the exact solution of a random assortment of spheres is described. In this algorithm, the scattering from a single sphere is expressed in a one-sphere T matrix. The scattering from two spheres is expressed in terms of two-sphere T matrices, which are related to the one-sphere T matrix. A recursive algorithm to deduce the (n+1)-sphere T matrix from the n-sphere T matrix is derived. With this recursive algorithm, the multiple scattering from a random assortment of N spheres can be obtained. This results in an N² algorithm rather than the normal N³ algorithm. As an example, the algorithm is used to calculate the low-frequency effective permittivity of a random assortment of 18 dielectric spheres. The effective permittivity deviates from the Maxwell-Garnett result for high contrast and high packing fraction. With a high packing fraction, dielectric enhancement at low frequency is possible     

Nonequiprobable signaling on the Gaussian channel

Signaling schemes for the Gaussian channel based on finite-dimensional lattices are considered. The signal constellation consists of all lattice points within a region R, and the shape of this region determines the average signal power. Spherical signal constellations minimize average signal power, and in the limit as N →∞, the shape gain of the N-sphere over the N-cube approaches πe/6≈1.53 dB. A nonequiprobable signaling scheme is described that approaches this full asymptotic shape gain in any fixed dimension. A signal constellation, Ω is partitioned into T subconstellations Ω₀ , . . ., Ω_τ-1 of equal size by scaling a basic region R. Signal points in the same subconstellation are used equiprobably, and a shaping code selects the subconstellation Ω_i with frequency f_i. Shaping codes make it possible to achieve any desired fractional bit rate. The schemes presented are compared with equiprobable signaling schemes based on Voronoi regions of multidimensional lattices. For comparable shape gain and constellation expansion ratio, the peak to average power ratio of the schemes presented is superior. Furthermore, a simple table lookup is all that is required to address points in the constellations. It is also shown that it is possible to integrate coding and nonequiprobable signaling within a common multilevel framework     

A T1 ones-density controller based on finite-statemachines

T1 clock recovery equipment requires that transmitted data not contain long sequences of 0 bits. For this reason, equipment that interfaces to T1 networks must meet a ones-density specification that ensures that 1 bit occurs frequently enough. Most schemes for meeting this specification require a substantial amount of overhead that consumes a significant portion of the available bandwidth. In this paper, and approach that meets the ones-density requirement with very little wasted bandwidth is described. Two practical coding schemes based on the approach are presented. The first, a block coding scheme, requires an overhead rate on the order of one bit per T1 frame, along with a delay of several frames. In an error-free channel, it introduces some errors, the rate of which is made acceptably low by using sufficient delay and overhead. In an errored channel, extension of errors is negligible. The second scheme, a sliding code scheme, requires an overhead rate on the order of a fraction of a bit per T1 frame, along with a delay of only several bit times. In an error-free channel, the rate of errors introduced is negligible. In an errored channel, approximately one out of every 2000 channel errors is extended into a burst, the length of which can be made acceptably low by using sufficient overhead     

Interception of frequency-hopped spread-spectrum signals

A frequency-hopped spread-spectrum signal is modeled as a sinusoid that has one of N random frequencies. Coherent and noncoherent interception receiver structures based on Neyman-Pearson detection theory are determined. Under the assumption that there is a single hop per detection period, the optimum receiver structure is shown to consist of a bank of matched filters called the average likelihood (AL) receiver. A suboptimum structure called the maximum likelihood (ML) receiver is also analyzed. It is shown that AL and ML receivers have essentially the same performance. Simple formulas that relate the probability of detection, P_D, to the probability of false alarm, P_F, and the signal-to-noise ratio (SNR) for large N are derived. Receiver structures are also derived and analyzed for the case where the signal hops a number of times in one detection interval. This may correspond to the detection of a multihop signal in one symbol interval or to detection based on integration over a number of symbol intervals. The relationships of P_D to P_F, for both coherent and noncoherent multiple-hop receivers, are examined     

Self-heating effects in basic semiconductor structures

Investigates the effects of self-heating on the high current I -V characteristics of semiconductor structures using a fully coupled electrothermal device simulator. It is shown that the breakdown in both resistors and diodes is caused by conductivity modulation due to minority carrier generation. In isothermal simulations with T=300 K, avalanche generation is the source of minority carriers. In simulations with self-heating, both avalanche and thermal generation of minority carriers can contribute to the breakdown mechanism. The voltage and current at breakdown are dependent on the structure of the device and the doping concentration in the region with lower doping. For all structures, except highly doped resistors with poor heating sinking at the contacts, the temperature at thermal breakdown ranged from 1.25T_i to 3T_i , where T_i is the temperature at which the semiconductor goes intrinsic. Hence, it is found that T=T_i is not a general condition for thermal (or second) breakdown. From these studies, an improved condition for thermal breakdown is proposed