Synthesis and antitumor activity of poly(3,4‐dihydro‐2H‐pyran‐co‐maleic anhydride‐co‐vinyl acetate)

The radical‐initiated terpolymerization of 3,4‐dihydro‐2H‐pyran (DHP), maleic anhydride (MA), and vinyl acetate (VA), which were used as a donor–acceptor–donor system, was carried out in methyl ethyl ketone in the presence of 2,2′‐azobisisobutyronitrile as an initiator at 65°C in a nitrogen atmosphere. The synthesis and characterization of binary and ternary copolymers, some kinetic parameters of terpolymerization, the terpolymer‐composition/thermal‐behavior relationship, and the antitumor activity of the synthesized polymers were examined. The polymerization of the DHP–MA–VA monomer system predominantly proceeded by the alternating terpolymerization mechanism. The in vitro cytotoxicities of poly(3,4‐dihydro‐2H‐pyran‐alt‐maleic anhydride) [poly(DHP‐alt‐MA)] and poly(3,4‐dihydro‐2H‐pyran‐co‐maleic anhydride‐co‐vinyl acetate) [poly(DHP‐co‐MA‐co‐VA)] were evaluated with Raji cells (human Burkitt lymphoma cell line). The antitumor activity of the prepared anion‐active poly(DHP‐alt‐MA) and poly(DHP‐co‐MA‐co‐VA) polymers were studied with methyl–thiazol–tetrazolium testing, and the 50% cytotoxic dose was calculated. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2352–2359, 2005     

Influences of co‐monomers and electrolyte acidity on morphological structure of copper‐in‐copolymer gradient film

In this paper, the influences of composition of copolymers and acidity of electrolyte in an electrochemical reactor on morphological structure of copper‐in‐polymer gradient composite film were investigated. For binary copolymers, poly(acrylonitrile‐co‐methyl acrylate) [P(AN‐co‐MA)] and poly(acrylonitrile‐co‐sodium allyl sulfonate) [P(AN‐co‐SAS)], the charged group ? SO in P(AN‐co‐SAS) improves the swelling of the copolymer phase and copper reduction to form gradient morphology; the carboxylic ester group in P(AN‐co‐MA) is not effective because of its poor hydrophilicity, but it is a cooperating component with P(AN‐co‐SAS) to avoid excess of counterion (i.e., Na⁺) in SCF, which might severely interrupt Cu²⁺ coexistence. The swelling of the polymer phase is helpful to decrease the energy of the transfer ions in SCF and to enhance copper deposition and gradient formation. The increase of surface energy because of cluster growth raises the surface energy level of deposited Cu⁰ clusters. The conteraction between these two energy factors allows the size of clusters to be 50–100 nm. The appropriate H⁺ concentration improves active Cu²⁺ reduction and thus deposited gradient copper phase in the copolymer matrix. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 373–380, 2004     

Preparation and thermal response behavior of poly(N‐isopropylacrylamide‐co‐a crylic acid) microgels via soap‐free emulsion polymerization based on AIBN initiator

Poly(N‐isopropylacrylamide‐co‐acrylic acid) (poly(NIPAM‐co‐AA)) microgels with different copolymer compositions were prepared through soap‐free emulsion polymerization at 80°C, and 2, 2′‐azobisisobutyronitrile (AIBN) was used as initiator. Scanning electron microscope (SEM) characterization shows that the prepared microgels are regular and smooth and not easy to distort. Result of ¹H‐NMR characterization shows that with increasing of the initial concentration of AA (AA in feed), the AA content in polymer chains increases. The thermal response of microgels latex was investigated by UV‐3010 spectrophometer through detecting the transmittance of the latex at different temperature in the range of 190–900 nm. The thermal response of the poly(NIPAM‐co‐AA) microgels was tested by dynamic light scattering (DLS). The results show that with the increase of AA content in polymer chains, the low critical solution temperature (LCST) of microgels latex first decreases and then increases. Still, with increasing of AA in poly(NIPAM‐co‐AA) microgels, the LCST of microgels first increases and then decreases. The basic reasons causing the changes of LCST of microgels latex and microgels are interpreted clearly in this article from the perspective of hydrogen bonding interaction. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Self‐association through hydrogen bonding and sequence distribution in poly(vinyl acetate‐co‐vinyl alcohol) copolymers

Correlation between hydrogen‐bonding self‐association and sequence distribution in poly(vinyl acetate‐co‐vinyl alcohol) copolymers (ACA) with different degrees of basic hydrolysis and sequence distributions has been studied by thermal analysis and NMR spectroscopy. ¹³C NMR spectroscopy has also been used to elucidate the blocky nature, branching, and tacticity of the copolymers. Thermal analytical studies indicate that hydrogen bonding distribution in block alcohol and vinyl acetate copolymers strongly depend on the sequence distribution wherein hydroxyl–hydroxyl self‐association is preferred. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 123–133, 1999     

Blends containing amphiphilic polymers. V. Compatibilization of N‐alkylitaconamic acid‐co‐styrene copolymers with interacting polymers

The phase behavior of blends containing N‐alkylitaconamic acid‐co‐styrene copolymers (NAIA‐co‐S) with poly(N‐vinyl‐2‐pyrrolidone) (PVP) of two different weight average molecular weights (M _w ), poly(2‐vinylpyridine) (P2VPy) and poly(4‐vinylpyridine) (P4VPy), was analyzed by differential scanning calorimetry and Fourier transform infrared spectroscopy. Copolymers containing 80% S are miscible with PVP₁₀, PVP₂₄, and P4VPy over the whole range of composition. In the case of blends with P2VPy, miscibility is observed only for the first three members of the series, i.e., NEIA‐co‐S, NPIA‐co‐S, and NBIA‐co‐S. For copolymers containing hexyl to dodecyl moieties, phase separation is observed in blends with P2VPy. Copolymers containing 50% S are miscible over the whole range of composition irrespective of the homopolymer and the length of the side chain of the itaconamic moiety of the copolymer. This behavior is interpreted in terms of steric hindrance, in the sense that the copolymers with long side chains are not able to interact with the nitrogen of P2VPy because of the position in the aromatic ring. The interactions between copolymers and homopolymers are discussed in terms of specific interactions like hydrogen bonds between the itaconamic moiety and the different functional groups of the homopolymers, together with the hydrophobic interaction, which cannot be disregarded. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2512–2519, 2006     

Competitive hydrogen bonding mechanisms underlying phase behavior of triple poly(N‐vinyl pyrrolidone)–poly(ethylene glycol)–poly(methacrylic acid‐co‐ethylacrylate) blends

Differential scanning calorimetry (DSC) of triple blends of high molecular weight poly(N‐vinyl pyrrolidone) (PVP) with oligomeric poly(ethylene glycol) (PEG) of molecular weight 400 g/mol and copolymer of methacrylic acid with ethylacrylate (PMAA‐co‐EA) demonstrates partial miscibility of polymer components, which is due to formation of interpolymer hydrogen bonds (reversible crosslinking). Because both PVP and PMAA‐co‐EA are amorphous polymers and PEG exhibits crystalline phase, the DSC examination is informative on the phase state of PEG in the triple blends and reveals a strong competition between PEG and PMAA‐co‐EA for interaction with PVP. The hydrogen bonding in the triple PVP–PEG–PMAA‐co‐EA blends has been established with FTIR Spectroscopy. To evaluate the relative strengths of hydrogen bonded complexes in PVP–PEG–PMAA‐co‐EA blends, quantum‐chemical calculations were performed. According to this analysis, the energy of H‐bonding has been found to diminish in the order: PVP–PMAA‐co‐EA–PEG(OH) > PVP–(OH)PEG(OH)–PVP > PVP–H₂O > PVP–PEG(OH) > PMAA‐co‐EA–PEG(? O? ) > PVP–PMAA‐co‐EA > PMAA‐co‐EA–PEG(OH). Thus, most stable complexes are the triple PVP–PMAA‐co‐EA–PEG(OH) complex and the complex wherein comparatively short PEG chains form simultaneously two hydrogen bonds to PVP carbonyl groups through both terminal OH‐groups, acting as H‐bonding crosslinks between longer PVP backbones. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

High char‐yielding poly[acrylonitrile‐co‐(itaconic acid)‐co‐(methyl acrylate)]: synthesis and properties

Polyacrylonitrile terpolymers of various compositions consisting of acrylonitrile (AN), itaconic acid (IA) and methyl acrylate (MA) were synthesized by solution polymerization in dimethylsulfoxide. Increase in concentration of either IA or MA retarded the overall polymerization rate and the polymer molecular weight. The system consisting of AN + MA and varying IA concentration was more prone to retardation in comparison with the system composed of AN + IA with variable MA concentration. The retardation factors were quantified. Minor quantities of MA boost the reactivity of IA in the terpolymer system. The terpolymer was richer in MA vis‐à‐vis the feed. The thermal characteristics of the terpolymer were examined as a function of its composition. In contrast to the copolymer of AN and IA requiring 1–1.5 mol% IA, the terpolymer required an IA content of approximately 2.5 mol% for optimum thermal stability. The polymer with 90 mol% AN, 2.5 mol% IA and 7.5 mol% MA exhibited reasonably good char‐forming characteristics and thermal stability. The overall crystallinity and crystallite size of the polymers were found to decrease on incorporation of the comonomers. The ‘aromatization index’ of the copolymer increased with the temperature of pyrolysis through re‐organization of the tetrahydropyridine ladder structure. Copyright © 2005 Society of Chemical Industry     

The phase behavior and thermal stability of blends of poly(styrene‐co‐methacrylic acid)/poly(styrene‐co‐ 4‐vinylpyridine)

The hydrogen bonding and miscibility behaviors of poly(styrene‐co‐methacrylic acid) (PSMA20) containing 20% of methacrylic acid with copolymers of poly(styrene‐co‐4‐vinylpyridine) (PS4VP) containing 5, 15, 30, 40, and 50%, respectively, of 4‐vinylpyridine were investigated by differential scanning calorimetry, thermogravimetric analysis (TGA), and Fourier transform infrared spectroscopy (FTIR). It was shown that all the blends have a single glass transition over the entire composition range. The obtained T_gs of PSMA20/PS4VP blends containing an excess amount of PS4VP, above 15% of 4VP in the copolymer, were found to be significantly higher than those observed for each individual component of the mixture, indicating that these blends are able to form interpolymer complexes. The FTIR study reveals presence of intermolecular hydrogen‐bonding interaction between vinylpyridine nitrogen atom and the hydroxyl of MMA group and intensifies when the amount of 4VP is increased in PS4VP copolymers. A new band characterizing these interactions at 1724 cm⁻¹ was observed. In addition, the quantitative FTIR study carried out for PSMA20/PS4VP blends was also performed for the methacrylic acid and 4‐vinylpyridine functional groups. The TGA study confirmed that the thermal stability of these blends was clearly improved. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Hydrogen‐bonding interaction of an alternating maleic acid–vinyl acetate copolymer with poly(ethylene glycol), polyacrylamide and poly(N‐isopropylacrylamide): a comparative study

The hydrogen‐bonding interaction and interpolymer complex formation between an alternating maleic acid–vinyl acetate copolymer, (MAc‐alt‐VA) and poly(ethylene glycol) (PEG), polyacrylamide (PAM) or poly(N‐isopropylacrylamide) (PNIPAM) in aqueous solution was potentiometrically and viscometrically investigated. MAc‐alt‐VA formed with PEG a strong hydrogen‐bonding interpolymer complex with a compact structure, and while its interaction with PAM seems to be very weak, if any, the complex formed with PNIPAM is even stronger than that with PEG. This indicates a very important contribution of hydrophobic interaction to the formation of such hydrogen‐bonding interpolymer complexes. Copyright © 2003 Society of Chemical Industry     

Compatibilization of polypropylene/ poly(3‐hydroxybutyrate) blends

Blending polypropylene (PP) with biodegradable poly(3‐hydroxybutyrate) (PHB) can be a nice alternative to minimize the disposal problem of PP and the intrinsic brittleness that restricts PHB applications. However, to achieve acceptable engineering properties, the blend needs to be compatibilized because of the immiscibility between PP and PHB. In this work, PP/PHB blends were prepared with different types of copolymers as possible compatibilizers: poly(propylene‐g‐maleic anhydride) (PP–MAH), poly (ethylene‐co‐methyl acrylate) [P(E–MA)], poly(ethylene‐co‐glycidyl methacrylate) [P(E–GMA)], and poly(ethylene‐co‐methyl acrylate‐co‐glycidyl methacrylate) [P(E–MA–GMA)]. The effect of each copolymer on the morphology and mechanical properties of the blends was investigated. The results show that the compatibilizers efficiency decreased in this order: P(E–MA–GMA) > P(E–MA) > P(E–GMA) > PP–MAH; we explained this by taking into consideration the affinity degree of the compatibilizers with the PP matrix, the compatibilizers properties, and their ability to provide physical and/or reactive compatibilization with PHB. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Specific interactions in poly(styrene‐co‐2‐hydroxyethyl acrylate)/poly(styrene‐co‐N,N‐dimethylacrylamide) systems

Amphiphilic copolymers of poly(styrene‐co‐2‐hydroxyethyl acrylate) (SHEA) and poly(styrene‐co‐N, N‐dimethylacrylamide) (SAD) of different compositions were prepared by free radical copolymerization and characterized by different techniques. Depending on the nature of the solvent and the densities of interacting species incorporated within the polystyrene matrices, novel materials as blends or interpolymer complexes with properties different from those of their constituents were elaborated when these copolymers are mixed together. The specific interpolymer interactions of hydrogen bonding type and the phase behavior of the elaborated materials were investigated by differential scanning calorimetry (DSC) and Fourier transform infra red spectroscopy (FTIR). The specific interactions of hydrogen bonding type that occurred within the SHEA and within their blends with the SAD were evidenced by FTIR qualitatively by the appearance of a new band at 1626 cm^?1 and quantitatively using appropriate spectral curve fitting in the carbonyl and amide regions. The variation of the glass transition temperature with the blend composition behaved differently with the densities of interacting species. The thermal degradation behavior of the materials was studied by thermogravimetry. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Poly(N‐isopropylacrylamide‐co‐hydroxyethyl methacrylate) graft copolymers and their application as carriers for drug delivery system

Poly(N‐isopropylacrylamide‐co‐hydroxyethyl methacrylate) [P(NIPAM‐co‐HEMA)] copolymer was synthesized by controlled radical polymerization from respective N‐isopropylacrylamide (NIPAM) and hydroxyethyl methacrylate (HEMA) monomers with a predetermined ratio. To prepare the thermosensitive and biodegradable nanoparticles, new thermosensitive graft copolymer, poly(L ‐lactide)‐graft‐poly(N‐isoporylacrylamide‐co‐hydroxyethyl methacrylate) [PLLA‐g‐P(NIPAM‐co‐HEMA)], with the lower critical solution temperature (LCST) near the normal body temperature, was synthesized by ring opening polymerization of L ‐lactide in the presence of P(NIPAM‐co‐HEMA). The amphiphilic property of the graft copolymers was formed by the grafting of the PLLA hydrophobic chains onto the PNIPAM based hydrophilic backbone. Therefore, the graft copolymers can self‐assemble into uniformly spherical micelles ò about 150–240 nm in diameter as observed by the field emission scanning electron microscope and dynamic light scattering. Dexamethasone can be loaded into these nanostructures during dialysis with a relative high loading capacity and its in vitro release depends on temperature. Above the LCST, most of the drugs were released from the drug‐loaded micelles, whereas a large amount of drugs still remains in the micelles after 48 h below the LCST. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis,effectiveness, and working mechanism of humic acid‐{sodium 2‐acrylamido‐2‐methylpropane sulfonate‐co‐N,N‐dimethyl acrylamide‐co‐acrylic acid} graft copolymer as high‐temperature fluid loss additive in oil well cementing

Monomers of 2‐acrylamido‐2‐methylpropane sulfonic acid (AMPS®), N,N–dimethyl acrylamide (NNDMA) and acrylic acid (AA) were grafted on humic acid as backbone by aqueous free radical copolymerization in such a manner that a graft copolymer possessing lateral terpolymer chains was obtained. Molar ratios between AMPS®, NNDMA, and AA were found to be 1 : 1.54 : 0.02 and the ratio between backbone and graft chain was 20 : 80 wt %. The synthesized fluid loss additive (FLA) was characterized by size exclusion chromatography (SEC), charge titration, and Brookfield viscometry. Thermogravimetric and SEC analysis revealed stretched backbone worm architecture for the polymer whereby humic acid constitutes the backbone decorated with lateral graft chains. Grafting was confirmed by SEC data (R_g) and by ineffectiveness of a blend of AMPS®‐NNDMA‐AA copolymer with humic acid. Their performance as high temperature FLA was studied at 150°C by measuring static filtration properties of oil well cement slurries containing 35% bwoc of silica fume and 1.2% bwoc AMPS®‐co‐itaconic acid retarder. At this temperature, 1.0% bwoc graft copolymer achieves API fluid loss value of 40 mL, thus confirming high effectiveness. The graft copolymer viscosifies cement slurries less than other common synthetic FLAs. The working mechanism of the graft copolymer was found to rely on adsorption onto surface of hydrating cement, as was evidenced by adsorption and zeta potential measurements. Adsorption is hardly affected by temperature and results in constriction of the filter cake pores. The study provides insight into performance of cement additives under the harsh conditions of high temperature and high pressure. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Thermodynamic hydrogen bonding inpoly(styrene‐co‐acrylic acid)/poly(styrene‐co‐4‐N,N‐dimethylacrylamide) blends

FTIR study of the hydrogen bonding interactions within blends of different ratios of poly(styrene‐co‐acrylic acid) containing 18, 27, and 32 mol% of acrylic acid (SAA) and poly(styrene‐co‐N,N‐dimethylacrylamide) containing 17 mol% of N,N‐dimethylacrylamide (SAD‐17) was carried out qualitatively and quantitatively in the temperature range varying from room temperature to 210°C. Two new bands characterizing these interactions appeared in the 1800–1550 cm^–1 region at 1730 cm^–1 and 1616 cm^–1 and are attributed to “liberated” carbonyl group of the acidic copolymer and the “associated amide” carbonyl group, respectively. Equilibrium constants describing both the self‐association K₂ and inter‐association K_A and the enthalpy of hydrogen bonding formation in the different blends were experimentally determined using a curve fitting analysis of the infra‐red spectra as a function of temperature using the appropriate equations derived from the Painter‐Coleman association model. The obtained results confirm the miscibility of these blends in the considered temperature range from the negative values of the total free energy of mixing ΔG_M. Optimization of the extent of intermolecular interactions between the two polymers in these blends is investigated. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

Characterization of polyacrylonitrile,poly(acrylonitrile‐co‐vinyl acetate), and poly(acrylonitrile‐co‐itaconic acid) based activated carbon nanofibers

In this study, three different acrylonitrile (AN)‐based polymers, including polyacrylonitrile (PAN), poly(acrylonitrile‐co‐vinyl acetate) [P(AN‐co‐VAc)], and poly(acrylonitrile‐co‐itaconic acid) [P(AN‐co‐IA)], were used as precursors to synthesize activated carbon nanofibers (ACNFs). An electrospinning method was used to produce nanofibers. Oxidative stabilization, carbonization, and finally, activation through a specific heating regimen were applied to the electrospun fibers to produce ACNFs. Stabilization, carbonization, and activation were carried out at 230, 600, and 750 °C, respectively. Scanning electron microscopy, thermogravimetric analysis (TGA), and porosimetry were used to characterize the fibers in each step. According to the fiber diameter variation measurements, the pore extension procedure overcame the shrinkage of the fibers with copolymer precursors. However, the shrinkage process dominated the scene for the PAN homopolymer, and this led to an increase in the fiber diameter. The 328 m²/g Brunauer–Emmett–Teller surface area for ACNFs with PAN precursor were augmented to 614 and 564 m²/g for P(AN‐co‐VAc) and P(AN‐co‐IA), respectively. The TGA results show that the P(AN‐co‐IA)‐based ACNFs exhibited a higher thermal durability in comparison to the fibers of PAN and P(AN‐co‐VAc). The application of these copolymers instead of AN homopolymer enhanced the thermal stability and increased the surface area of the ACNFs even in low‐temperature carbonization and activation processes. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44381.     

Design,synthesis, and characterization of a potential flame retardant poly(lactic acid‐co‐pyrimidine‐2,4,5,6‐tetramine) via direct melt polycondensation

Directly starting from d ,l ‐lactic acid (LA) and pyrimidine‐2,4,5,6‐tetramine (PTA), the copolymer P(LA‐co‐PTA) as a novel potential solid compatible polymeric flame retardant is synthesized as designed via melt polycondensation. When the molar feed ratio LA/PTA is 60/1, the optimal synthetic conditions are discussed. After the prepolymerization at 140°C for 8 h, using 0.5 wt % stannous oxide as the catalyst, the melt copolymerization at 160°C for 4 h gives the copolymer with the biggest intrinsic viscosity 0.88 dL g^?1. The structures and properties of P(LA‐co‐PTA)s at different molar feed ratios are characterized by FT‐IR, ¹H‐NMR, ¹³C‐NMR, GPC, XRD, DSC, and TGA. The decomposition temperatures of P(LA‐co‐PTA)s are higher than these of homopolymer poly(d,l ‐lactic acid) (PDLLA). All copolymers have higher char yield than PDLLA, and the more PTA in the feed content, the higher char yield. What's more, there are some residues at 700–800°C, indicating that P(LA‐co‐PTA)s have good charring ability. When the monomer PTA is introduced into polylactic acid by chemical bonding as purine (PU) unit formed during the condensation, both the PTA's relatively higher nitrogen content and the PU's similar structure with flame retardant benzimidazole are beneficial to improve the thermal stability and charring ability, especially the latter. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40275.     

Transparent poly(methyl methacrylate‐co‐butyl acrylate) nanofibers

Nanofibers of n‐Butyl Acrylate/Methyl Methacrylate copolymer [P(BA‐co‐MMA)] were produced by electrospinning in this study. P(BA‐co‐MMA) was synthesized by emulsion polymerization. The structural and thermal properties of copolymers and electrospun P(BA‐co‐MMA) nanofibers were analyzed using Fourier transform infrared spectroscopy–Attenuated total reflectance (FTIR–ATR), Nuclear magnetic spectroscopy (NMR), and Differential scanning calorimetry (DSC). FTIR–ATR spectra and NMR spectrum revealed that BA and MMA had effectively participated in polymerization. The morphology of the resulting nanofibers was investigated by scanning electron microscopy, indicating that the diameters of P(BA‐co‐MMA) nanofibers were strongly dependent on the polymer solution dielectric constant, and concentration of solution and flow rate. Homogeneous electrospun P(BA‐co‐MMA) fibers as small as 390 ± 30 nm were successfully produced. The dielectric properties of polymer solution strongly affected the diameter and morphology of electrospun polymer fibers. The bending instability of the electrospinning jet increased with higher dielectric constant. The charges inside the polymer jet tended to repel each other so as to stretch and reduce the diameter of the polymer fibers by the presence of high dielectric environment of the solvent. The extent to which the choice of solvent affects the nanofiber characteristics were well illustrated in the electrospinning of [P(BA‐co‐MMA)] from solvents and mixed solvents. Nanofiber mats showed relatively high hydrophobicity with intrinsic water contact angle up to 120°. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 4264–4272, 2013     

Preparation and self‐assembly of poly(diglycidyl maleate‐co‐stearyl methacrylate)

Poly(diglycidyl maleate‐co‐stearyl methacrylate) (P(DGMA‐co‐SMA)) with reactive epoxy groups was synthesized by reaction of poly(maleic anhydride‐co‐stearyl methacrylate) (P(MA‐co‐SMA)) and epichlorohydrin. The effect of precipitant on self‐assembly behaviors of the resultant copolymer was investigated. It was found that vesicles and nanotubule liked aggregates can be obtained through self‐assembly of P(DGMA‐co‐SMA) in THF solution using CH₃CH₂OH (EtOH) as precipitant while spheral aggregates can be obtained using H₂O as precipitant. The mechanism of the self‐assembly behavior was discussed. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Bioengineering functional copolymers: V. Synthesis,LCST, and thermal behavior of poly(N‐isopropyl acrylamide‐co‐p‐vinylphenylboronic acid)

New boron‐containing stimuli‐responsive (pH‐ and temperature‐sensitive) copolymers were synthesized and characterized. Structure and composition of copolymers were determined by FTIR and ¹H‐NMR spectroscopy, and elemental analysis and titration (N and B contents for NIPA and VPBA unit, respectively). By DSC and XRD measurements, it is established that the synthesized copolymers have a semicrystalline structure due to formation of intra‐ and/or intermolecular H‐bonded supramolecular architecture. The copolymer composition–structure–property relationship indicates semicrystalline structure of copolymers with different compositions, degrees of crystallinity, and thermal and stimuli‐responsive behaviors depends on the content of boron‐containing monomer linkage. Results of DSC, DTA, and TGA analyses indicated that copolymers have T_g and T_m and high thermal stability. These water‐soluble and temperature‐ and pH‐sensitive amphiphilic copolymers can be used as polymeric carries for delivery of biological entities for diverse biomedical use, including boron neutron capture therapy. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 573–582, 2005     

Preparation of narrow‐disperse or monodisperse poly{[poly(ethylene glycol) methyl ether acrylate]‐co‐(acrylic acid)} microspheres with ethyleneglycol dimethacrylate as crosslinker by distillation precipitation polymerization

Narrow‐disperse or monodisperse poly{[poly(ethylene glycol) methyl ether acrylate]‐co‐(acrylic acid)} (poly(PEGMA‐co‐AA)) microspheres were prepared by distillation precipitation polymerization with ethyleneglycol dimethacrylate (EGDMA) as crosslinker with 2,2′‐azobisisobutyronitrile as initiator in neat acetonitrile in the absence of any stabilizer, without stirring. The diameters of the resultant poly(PEGMA‐co‐AA‐co‐EGDMA) microspheres were in the range 200–700 nm with a polydispersity index of 1.01–1.14, which depended on the comonomer feed of the polymerization. The addition of the hydrogen bonding monomer acrylic acid played an essential role in the formation of narrow‐disperse or monodisperse polymer microspheres during the polymerization. Copyright © 2006 Society of Chemical Industry