Biocompatible and biodegradable alginate/poly(N‐isopropylacrylamide) hydrogels for sustained theophylline release

Mixed‐interpenetrated polymeric networks based on sodium alginate (ALG) and poly(N‐isopropylacryl amide) (PNIPAAm) covalently cross‐linked with N,N'‐methylenebisacrylamide are studied for their biocompatibility, nontoxicity, and biodegradability aiming their application in drug delivery. The presence of drug‐polymeric matrix interactions and the distribution of the drug in the polymeric network for theophylline‐loaded ALG/PNIPAAm hydrogels are also investigated by spectroscopic and microscopic methods. The quantitative evaluation of theophylline loaded hydrogels performed by NIR‐CI technique shows a better drug entrapment and a higher homogeneity of the samples with increased alginate content. The thermal behavior of the hydrogels is significantly modified by theophylline presence. The application of the ALG/PNIPAAm hydrogels as carriers for sustained drug release formulations was assessed by the theophylline release tests performed both by in vitro and in vivo studies. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40733.     

Dual‐responsive semi‐interpenetrating network beads based on calcium alginate/poly(N‐isopropylacrylamide)/poly(sodium acrylate) for sustained drug release

To improve the mechanical strength of natural hydrogels and to obtain a sustained drug‐delivery device, temperature‐/pH‐sensitive hydrogel beads composed of calcium alginate (Ca‐alginate) and poly(N‐isopropylacrylamide) (PNIPAAm) were prepared in the presence of poly(sodium acrylate) (PAANa) with ultrahigh molecular weight (M_η ≥ 1.0 × 10⁷) as a strengthening agent. The influence of PAANa content on the properties, including the beads stability, swelling, and drug‐release behaviors, of the hydrogels was evaluated. Scanning electron microscopy and oscillation experiments were used to analyze the structure and mechanical stability of the hydrogel beads, respectively. The results show that stability of the obtained Ca‐alginate/PNIPAAm hydrogel beads strengthened by PAANa the alginate/poly(N‐isopropyl acrylamide) hydrogel bead (SANBs) was significantly improved compared to that of the beads without PAANa (NANBs) at pH 7.4. The swelling behavior and drug‐release capability of the SANBs were markedly dependent on the PAANa content and on the environmental temperature and pH. The bead sample with a higher percentage of PAANa exhibited a lower swelling rate and slower drug release. The drug release profiles from SANBs were further studied in simulated intestinal fluid, and the results demonstrated here suggest that SANBs could serve as a potential candidate for controlled drug delivery in vivo. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation and microstructural analysis of poly(ethylene oxide) comb‐type grafted poly(N‐isopropyl acrylamide) hydrogels crosslinked by poly(ϵ‐caprolactone)

Poly(N‐isopropyl acrylamide) (PNIPAAm)‐graft‐poly(ethylene oxide) (PEO) hydrogels crosslinked by poly(?‐caprolactone) diacrylate were prepared, and their microstructures were investigated. The swelling/deswelling kinetics and compression strength were measured. The relationship between the structure and properties of hydrogel are discussed. It was found that the PEO comb‐type grafted structure reduced the thermosensitivity and increased the compression strength. The addition of poly(?‐caprolactone) (PCL) accelerated the deswelling rate of the hydrogels. Meanwhile, the entanglement of PCL chains restrained the further swelling of the network of gels. The PCL crosslinking agent and PEO comb‐type grafted structure made the behavior of the hydrogels deviate from the rubber elasticity equations. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Dual pH‐ and thermal‐responsive nanocomposite hydrogels for controllable delivery of hydrophobic drug baicalein

Hydrogels have been widely used as mild biomaterials due to their bio‐affinity, high drug loading capability and controllable release profiles. However, hydrogel‐based carriers are greatly limited for the delivery of hydrophobic payloads due to the lack of hydrophobic binding sites. Herein, nano‐liposome micelles were embedded in semi‐interpenetrating poly[(N‐isopropylacrylamide)‐co‐chitosan] (PNIPAAm‐co‐CS) and poly[(N‐isopropylacrylamide)‐co‐(sodium alginate)] (PNIPAAm‐co‐SA) hydrogels which were responsive to both temperature and pH, thereby establishing tunable nanocomposite hydrogel delivery systems. Nano‐micelles formed via the self‐assembly of phospholipid could serve as the link between hydrophobic drug and hydrophilic hydrogel due to their special amphiphilic structure. The results of transmission and scanning electron microscopies and infrared spectroscopy showed that the porous hydrogels were successfully fabricated and the liposomes encapsulated with baicalein could be well contained in the network. In addition, the experimental results of response release in vitro revealed that the smart hydrogels showed different degree of sensitiveness under different pH and temperature stimuli. The results of the study demonstrate that combining PNIPAAm‐co‐SA and PNIPAAm‐co‐CS hydrogels with liposomes encapsulated with hydrophobic drugs is a feasible method for hydrophobic drug delivery and have potential application prospects in the medical field. © 2018 Society of Chemical Industry     

Flurbiprofen axetil loaded coaxial electrospun poly(vinyl pyrrolidone)–nanopoly(lactic‐co‐glycolic acid) core–shell composite nanofibers: Preparation,characterization, and anti‐adhesion activity

Flurbiprofen axetil (FA)‐loaded coaxial electrospun poly(vinyl pyrrolidone) (PVP)–nanopoly(lactic‐co‐glycolic acid) core–shell composite nanofibers were successfully fabricated by a facile coaxial electrospinning, and an electrospun drug‐loaded system was formed for anti‐adhesion applications. The FA, which is a kind of lipid microsphere nonsteroidal anti‐inflammatory drug, was shown to be successfully adsorbed in the PVP, and the formed poly(lactic‐co‐glycolic acid) (PLGA)/PVP/FA composite nanofibers exhibited a uniform and smooth morphology. The cell viability assay and cell morphology observation revealed that the formed PLGA/PVP/FA composite nanofibers were cytocompatible. Importantly, the loaded FA within the PLGA/PVP coaxial nanofibers showed a sustained‐release profile and anti‐adhesion activity to inhibit the growth of the IEC‐6 and NIH3T3 model cells. With the significantly reduced burst‐release profile, good cytocompatibility, and anti‐adhesion activity, the developed PLGA/PVP/FA composite nanofibers were proposed to be a promising material in the fields of tissue engineering and pharmaceutical science. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41982.     

Preparation and release characteristics of dexamethasone acetate loaded organochlorine‐free poly(lactide‐co‐glycolide) nanoparticles

Dexamethasone‐loaded poly(lactide‐co‐glycolide) (PLGA) devices are commonly used as model systems for controlled release. In this study, PLGA nanoparticles containing dexamethasone acetate were prepared by a nanoprecipitation technique in the absence of organochlorine solvents and were characterized by their mean size, ζ potential, scanning electron microscopy, and differential scanning calorimetry to develop a controlled release system. The analytical method for the quantification of dexamethasone acetate by high‐performance liquid chromatography was validated. The results show that it was possible to prepare particles at a nanometric size because the average diameter of the drug‐loaded PLGA particles was 540 ± 4 nm with a polydispersity index of 0.07 ± 0.01 and a ζ potential of ?2.5 ± 0.3 mV. These values remained stable for at least 7 months. The drug encapsulation efficiency was 48%. In vitro tests showed that about 25% of the drug was released in 48 h. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41199.     

Thermodynamic investigation of thermoresponsive xanthan‐poly (N‐isopropylacrylamide) hydrogels

Polysaccharide‐based hydrogels, such as xanthan maleate/poly(N‐isopropylacrylamide) (PNIPAAm) interpenetrated polymer networks, are thermostimulable materials of interest for the controlled release of biologically active components due to conformation changes at the low critical‐solution temperature (LCST) PNIPAAm phase transition. The phase transition of these interpenetrated polymer network hydrogels, where PNIPAAm is in a ‘confined’ environment, was examined by high resolution magic angle spinning nuclear magnetic resonance and differential scanning calorimetry. High resolution magic angle spinning nuclear magnetic resonance spectroscopy allows the accurate determination of LCST and an evaluation of the corresponding thermodynamic data. More particularly, the evolution of these data as a function of the composition of the hydrogel, and of the external parameters such as pH and ionic strength, was considered. LCST shows a minimal value with increasing xanthan content. Moreover, it was possible to calculate, as a function of temperature, the fraction of NIPAAm which remains uncollapsed. The data obtained for pure PNIPAAm hydrogels are in good agreement with recently published results. The phase transition of PNIPAAm in a diphasic hydrogel is broader when PNIPAAm is ‘confined’ within an interpenetrated polymer network than in a pure PNIPAAm crosslinked network. The widening of the transition with increasing xanthan content indicates a reduction of the PNIPAAm interchain aggregation in a network structure. Copyright © 2011 Society of Chemical Industry     

Synthesis and characterization of a novel stimuli‐responsive magnetite nanohydrogel based on poly(ethylene glycol) and poly(N‐isopropylacrylamide) as drug carrier

A novel stimuli‐responsive magnetite nanohydrogel (MNHG), namely [poly(ethylene glycol)‐block‐poly(N‐isopropylacrylamide‐co‐maleic anhydride)₂]‐graft‐poly(ethylene glycol)/Fe₃O₄ [PEG‐b‐(PNIPAAm‐co‐PMA)₂]‐g‐PEG/Fe₃O₄, was successfully developed. For this purpose, NIPAAm and MA monomers were block copolymerized onto PEG‐based macroinitiator through atom transfer radical polymerization technique to produce PEG‐b‐(PNIPAAm‐co‐PMA)₂. The synthesized Y‐shaped terpolymer was crosslinked through the esterification of maleic anhydride units using PEG chains to afford a hydrogel. Afterward, magnetite nanoparticles were incorporated into the synthesized hydrogel through the physical interactions. The chemical structures of all synthesized samples were characterized using Fourier transform infrared and proton nuclear magnetic resonance spectroscopies. Morphology, thermal stability, size, and magnetic properties of the synthesized MNHG were investigated. In addition, the doxorubicin hydrochloride loading and encapsulation efficiencies as well as stimuli‐responsive drug release ability of the synthesized MNHG were also evaluated. The drug‐loaded MNHG at physiological condition exhibited negligible drug release values. In contrast, at acidic (pH 5.3) condition and a little bit higher temperature (41 °C) the developed MNHG showed higher drug release values, which qualified it for cancer chemotherapy due to especial physiology of cancerous tissue in comparison with the surrounding normal tissue. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46657.     

Effect of poly(ethylene glycol)-derived crosslinkers on the properties of thermosensitive hydrogels

Three crosslinkers, poly(ethylene glycol) diacrylate (PEGDA), glycerol ethoxylate triacrylate (GETA) and citric acid-(PEG acrylate)₃ (CA-PEGTA) derived from poly(ethylene glycol) (PEG) were synthesized at first. The three series of poly (N-isopropylacrylamide) (PNIPAAm) hydrogels were prepared by photopolymerization with the crosslinkers and compared with a hydrogel based on commercial crosslinker, N,N′-methylene bis-acrylamide (NMBA). The influence of the crosslinker structures and contents on the swelling behaviour, mechanical properties, and drug release of the hydrogels was investigated. The results showed that the hydrogels based on PEGDA and NMBA exhibited the highest and the lowest swelling ratio, respectively. The content of crosslinker of all hydrogel series showed good thermosensitivity and thermo-reversibility. The critical gel transition temperature (CGTT) appeared at 32 °C for the hydrogel based on NMBA, but appeared at about 34 °C for other hydrogels due to higher hydrophilicity of the crosslinker. In the mechanical properties, three-arms crosslinker GETA and CA-PEGTA led to higher mechanical strength than a linear crosslinker PEGDA. A hydrogel based on GETA (NG6) showed the highest shear modulus of 656.9 kPa and Young’s modulus of 1655.0 kPa. The hydrogels containing higher content of crosslinker revealed lower swelling ratio and higher mechanical strength. In the drug release, the hydrogels with higher swelling ratios showed higher drug absorbed. The highest release percentage of caffeine and vitamin B12 for hydrogel based on PEGDA (NP6) could reach 68.3% and 75.4%, respectively. In addition, the bound water and toxicity of the hydrogels were also investigated.

     

Development and characterization of thermosensitive hydrogels based on poly(N‐isopropylacrylamide) and calcium alginate

This work refers to the synthesis and characterization of thermosensitive hydrogels based on interpenetrating polymer networks (IPNs) of poly(N‐isopropylacrylamide) (PNIPAAm) and calcium alginate in the form of films. The influence of the crosslinking degree of PNIPAAm and alginate content on thermal, swelling, mechanical, and morphological properties of hydrogels is investigated in detail. Characterization of pure PNIPAAm hydrogels and IPN hydrogels was performed by FTIR, DSC, DMA, and SEM. In addition, the studies of equilibrium swelling behavior as well as swelling, deswelling, and reswelling kinetics are performed. The results obtained imply the benefits of synthesizing IPNs based on PNIPAAm and calcium alginate over pure PNIPAAm hydrogels. The presence of calcium alginate contributes to the improvement of mechanical properties, the deswelling rate of hydrogels, and the network porosity, without altering the thermosensitivity of PNIPAAm significantly. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and characterization of a drug‐delivery system based on melamine‐modified poly(vinyl acetate‐co‐maleic anhydride) hydrogel

Three‐dimensional polymeric networks, which quickly swell by imbibing a large amount of water or deswell in response to changes in their external environment, are called hydrogels. These types of polymeric materials are good potential candidates for drug‐delivery systems. In this study, we first synthesized poly(vinyl acetate‐co‐maleic anhydride) by free‐radical copolymerization. Then, they were modified with different molar ratios of melamine to prepare hydrogels that could be used in drug‐delivery systems. The hydrogels were characterized by Fourier transform infrared spectroscopy, ¹H‐NMR, differential scanning calorimetry, and scanning electron microscopy. In the second step, Ceftazidime antibiotic was loaded on selected hydrogels. The in vitro drug release was investigated and compared in three different media (HCl solution at pH = 3 and buffer solutions at pH 6.1and pH 8). © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40389.     

Temperature/pH‐sensitive comb‐type graft hydrogels composed of chitosan and poly(N‐isopropylacrylamide)

Comb‐type graft hydrogels, composed of chitosan and poly(N‐isopropylacrylamide) (PNIPAAm), were prepared to manifest rapid temperature and pH sensitivity. Instead of directly grafting the NIPAAm monomer onto the chitosan chain, semitelechelic PNIPAAm with carboxyl end group was synthesized by radical polymerization using 3‐mercaptopropionic acid as the chain‐transfer agent, and was grafted onto chitosan having amino groups. The comb‐type hydrogels were prepared with two different graft yields and grafting regions, such as surface‐ and bulk‐grafting, and then compared with a chitosan hydrogel. The synthesis of telechelic PNIPAAm and the formation of amide group were confirmed by using FTIR spectroscopy and gel permeation chromatography. Results from the water state and thermal stability revealed that the introduction of the PNIPAAm side chain disturbed the ordered arrangement of the chitosan molecule, resulting in an increase in the equilibrium water content. Comb‐type graft hydrogels showed rapid temperature and pH sensitivity because of the free‐ended PNIPAAm attached to the chitosan main chain and the chitosan amino group itself, respectively. In particular, the surface graft hydrogel maintained its dimension at low pH, although the chitosan main chain was not crosslinked, whereas chitosan and bulk graft hydrogel were dissolved as a result of the coating effect of pH‐independent PNIPAAm. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2612–2620, 2004     

Preparation and drug‐release behavior of minocycline‐loaded poly[hydroxyethyl methacrylate‐co‐poly(ethylene glycol)–methacrylate] films

In this work, biocompatible hydrogel matrices for wound‐dressing materials and controlled drug‐release systems were prepared from poly[hydroxyethyl methacrylate‐co‐poly(ethylene glycol)–methacrylate] [p(HEMA‐co‐PEG–MA] films via UV‐initiated photopolymerization. The characterization of the hydrogels was conducted with swelling experiments, Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis (differential scanning calorimetry), and contact‐angle studies. The water absorbency of the hydrogel films significantly changed with the change of the medium pH from 4.0 to 7.4. The thermal stability of the copolymer was lowered by an increase in the ratio of poly(ethylene glycol) (PEG) to methacrylate (MA) in the film structure. Contact‐angle measurements on the surface of the p(HEMA‐co‐PEG–MA) films demonstrated that the copolymer gave rise to a significant hydrophilic surface in comparison with the homopolymer of 2‐hydroxyethyl methacrylate (HEMA). The blood protein adsorption was significantly reduced on the surface of the copolymer hydrogels in comparison with the control homopolymer of HEMA. Model antibiotic (i.e., minocycline) release experiments were performed in physiological buffer saline solutions with a continuous flow release system. The amount of minocycline release was shown to be dependent on the HEMA/PEG–MA ratio. The hydrogels have good antifouling properties and therefore are suitable candidates for wound dressing and other tissue engineering applications. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation,characterization, and drug‐release properties of pH/temperature‐responsive poly(N‐isopropylacrylamide)/chitosan semi‐IPN hydrogel particles

Novel poly(N‐isopropylacrylamide) (PNIPAAm)/chitosan (CS) semi‐interpenetrating polymer network hydrogel particles were prepared by inverse suspension polymerization. The prepared particles were sensitive to both temperature and pH, and they had good reversibility in solution at different temperatures and pH values. The swelling ratios of PNIPAAm/CS hydrogel particles decreased slightly with the addition of CS, which did not shift the lower critical solution temperature. The drug‐release behavior of the particles was investigated using cyclic adenosine 3′,5′‐monophosphate (cAMP) as a model drug. The release of cAMP from the hydrogel particles was affected by temperature, pH, and the CS content in the particles. These results showed that semi‐IPN hydrogel particles appeared to be of great promise in pH‐ and temperature‐sensitive oral drug release. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation,characterization, and drug‐release properties of poly(N‐isopropylacrylamide) microspheres having poly(itaconic acid) graft chains

An inverse suspension polymerization method for the preparation of thermoresponsive hydrogel microspheres based on N‐isopropylacrylamide was described in this article. The polymerization reaction was carried out at 200 rpm stirring rate and the microspheres obtained were in the size range of 71–500 μm in the swollen states. The particles were sieved by using ASTM sieves. The selected fraction (180–250 μm) of poly(N‐isopropylacrylamide) (PNIPAAm) microspheres was used for radiation‐induced modification with itaconic acid (IA) to obtain PNIPAAm/poly(itaconic acid) graft copolymer. Viagra and lidocaine were used as model drugs for the investigation of controlled‐release behavior of the microspheres. Incorporation of IA graft chains onto microspheres enhanced significantly the uptake of both drugs and further controlled release at specific pH values. The release studies showed that some of the basic parameters affecting the drug‐loading and ‐release behavior of the microspheres were pH, temperature, particle size, and chemical nature of drug. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1115–1124, 2005     

Preparation and application in drug controlled delivery of pH‐sensitive P(CE‐co‐DMAEMA‐co‐MEG) hydrogel

A pH‐sensitive hydrogel [P(CE‐co‐DMAEMA‐co‐MEG)] was synthesized by the free‐radical crosslinking polymerization of N,N‐dimethylaminoethyl methacrylate (DMAEMA), poly(ethylene glycol) methyl ether methacrylate(MPEG‐Mac) and methoxyl poly(ethylene glycol)‐poly(caprolactone)‐methacryloyl methchloride (PCE‐Mac). The effects of pH and monomer content on swelling property, swelling and deswelling kinetics of the hydrogels were examined and hydrogel microstructures were investigated by SEM. Sodium salicylate was chosen as a model drug and the controlled‐release properties of hydrogels were pilot studied. The results indicated that the swelling ratios of the gels in stimulated gastric fluids (SGF, pH = 1.4) were higher than those in stimulated intestinal fluids (SIF, pH = 7.4), and followed a non‐Fickian and a Fickian diffusion mechanism, respectively. In vitro release studies showed that its release rate depends on different swelling of the network as a function of the environmental pH and DMAEMA content. SEM micrographs showed homogenous pore structure of the hydrogel with open pores at pH 1.4. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40737.     

Sustained release behavior of pH‐responsive poly(vinyl alcohol)/poly(acrylic acid) hydrogels containing activated carbon fibers

The composites of pH‐responsive poly(vinyl alcohol)/poly(acrylic acid) hydrogel and activated carbon fibers (ACFs) were prepared as sustained drug release system with excellent mechanical properties. The mechanical properties of hydrogels were improved greatly by addition of ACFs. The thinner ACFs were more effective in increasing the mechanical properties of composite hydrogels. The cumulative amount of release and the release period were dependent on the surface area and the pore volume of ACFs. The drug release was maximized at basic condition due to the pH‐sensitive hydrogel matrices and the initial bust phenomenon was alleviated by incorporating ACFs in the hydrogels. The drug release was sustained about four times longer and the mechanical property was increased about 2.6 times higher because ACFs worked as drug reservoir and reinforcement. Cytotoxicity evaluation confirmed the biocompatible characteristics of the ACFs‐containing hydrogels. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation and property of starch nanoparticles reinforced aldehyde–hydrazide covalently crosslinked PNIPAM hydrogels

Injectable, de‐crosslinkable, and thermosensitive hydrogels are obtained by hydrazide‐functionalized poly(N‐isopropylacrylamide) and aldehyde‐functionalized dextrin through in situ crosslinked method. Natural based and degradable starch nanoparticles (SNPs) are used as fillers in order to improve mechanical property of hydrogels. Internal morphology, dynamic modulus, thermosensitivity property, de‐crosslinking performance, drug release, and in vitro cytotoxicity of hydrogels are investigated. Results show that SNPs disperse well throughout hydrogel and have no significant influence on gelation time and de‐crosslinking performance. Elasticity property of composite hydrogel prepared from 9.0 wt % precursors with 1.5 wt % fillers is improved significantly by SNPs and maximum storage modulus reaches 399.2 kPa, but 89.6 kPa of unreinforced hydrogels. Hydrogels exhibit good thermosensitive performance at alternating cyclic temperature of 25 and 37 °C. Doxorubicin hydrochloride‐loaded hydrogels can release more than 25 days. No significant cytotoxicity to L929 fibroblast cells is observed through a CCK‐8 assay for hydrogels, precursors, and SNPs. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45761.     

Preparation and swelling properties of homopolymeric alginic acid fractions/poly(N‐isopropyl acrylamide) graft copolymers

Graft copolymers of crosslinked poly(N‐isopropyl acrylamide) (PNIPAAm) and homopolyguluronic acid (GG) and homopolymannuronic acid (MM) fractions of alginic acid were synthesized. MM and GG block fractions were obtained by partial acid hydrolysis of the alkaline extract from the brown seaweed Macrocystis pyrifera. The conjugation of these block fractions with the synthetic polymer was achieved by amidation with crosslinked PNIPAAm functionalized with an amino group at the end of the polymer chain. The structure of conjugates was determined by Fourier transform infrared and NMR spectroscopy. Atomic force microscopy of the graft copolymer GG‐g‐PNIPAAm showed a regular porous pattern, whereas the MM‐g‐PNIPAAm graft copolymer showed a regular netlike structure. Aqueous solutions of the synthesized graft copolymers afforded hydrogels by stirring with 0.1M CaCl₂. The hydrogels showed a well‐defined stimulus–response to temperature and pH. The swelling, thermal, and pH characterizations demonstrated the superior properties of the GG‐g‐PNIPAAm hydrogel over the MM‐g‐PNIPAAm hydrogel. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42398.     

Release of vitamin B12 from poly(N‐vinyl‐2‐pyrrolidone)‐crosslinked polyacrylamide hydrogels: A kinetic study

Hydrogels, composed of poly(N‐vinyl‐2‐pyrrolidone) and crosslinked polyacrylamide, were synthesized and the release of vitamin B₁₂ from these hydrogels was studied as a function of the degree of crosslinking and pH of the external swelling media. The three drug‐loaded hydrogel samples synthesized with different crosslinking ratios of 0.3, 0.7, and 1.2 (in mol %) follow different drug‐release mechanisms, that is, chain relaxation with zero‐order, non‐Fickian and Fickian, or diffusion‐controlled mechanisms. To establish a correlation between their swelling behavior and drug‐release mechanism, the former was studied by the weight‐gain method and, at the same time, the concentration of the drug released was studied colorimetrically. Various swelling parameters such as the swelling exponent n, gel‐characteristic constant k, penetration velocity v, and diffusion coefficient D were evaluated to reflect the quantitative aspect of the swelling behavior of these hydrogels. Finally, the drug‐release behavior of the hydrogels was explained by proposing the swelling‐dependent mechanism. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 1706–1714, 2000