Preparation and characterization of cotton fibers coated with AA-IA hydrogel containing silver/graphene or graphene oxide nanoparticles

This study presents the fabrication and characterization of cotton textile fibers coated with hydrogels containing silver and Graphene or Graphene Oxide nanoparticles using 1-hexyl-3-methyl-imidazolium (HMIMPF6) ionic liquid (IL) as carbon filler dispersant. Acrylic acid/Itaconic acid (AA-IA) hydrogels are synthesized by polymerizing an acrylic acid-itaconic acid aqueous (80/20 v/v) solution and mixed with 2-2-Azobis (2-methylpropionamide) diclorohydrate, and N,N´-methylenbis (acrylamide). Then silver nanoparticles are generated throughout the hydrogel networks using in situ method by incorporating the silver ions and subsequent reduction with sodium borohydride. Then a cotton textile fiber substrate was coated with this hydrogel. Finally, graphene or graphene oxide was added to the textile substrate already impregnated with hydrogel and silver nanoparticles. In order to favor the dispersion of the carbon nano-structures in the system, an IL was used. The influence of these nanocomposite hydrogels on the properties of textile fiber were investigated by infrared spectroscopy (ATR), scanning electron microscopy (SEM), inductively coupled plasma mass spectroscopy (ICP) and antibacterial tests against Staphylococcus aureus (Gram positive) and Escherichia coli (Gram negative). The effect of each and combined fillers dispersion on antimicrobial properties were determined. Cotton fibers coated with hydrogel containing silver nanoparticles and graphene showed better results when the ionic liquid was used. Graphene showed greater antimicrobial efficiency than graphene oxide. It was proved that the textiles coated with hydrogels containing these fillers had an excellent antibacterial ability and are a good option to be used for medical applications such as wounds and burns dressing.     

Synthesis and characterization of silver nanoparticle incorporated gelatin‐hydroxypropyl methacrylate hydrogels for wound dressing applications

A replaceable wound cover which absorbs moisture and resist infection can be used to prevent development of chronic wounds. A major criterion for a replaceable wound dressing is nonadherence to cells to prevent pain upon removal. A major limitation of water absorbing hydrogels used in wound dressing applications is their poor mechanical strength. In this study, gelatin methacrylate (GelMA) was synthesized by reacting Type A porcine skin gelatin with methacrylic anhydride at 50 °C. Resultant GelMA monomer containing polyethylene glycol (PEG) protected silver nanoparticles were subsequently copolymerized with 2‐hydroxypropyl methacrylate (HPMA) at room temperature by redox mechanism. This resulted in a hydrogel copolymer with optimum mechanical stability and moisture retention while inhibiting microbial contamination and FT‐IR spectroscopy was used to confirm copolymer formation. Antimicrobial properties of the hydrogel using agar diffusion showed zone of inhibition against Staphylococcus aureus. Surface morphology was observed using scanning electron microscopy (SEM) and elemental analysis was carried out using energy‐dispersive spectroscopy (EDS). Micro‐computed tomography (micro‐CT) analysis of the hydrogel showed enhancement in the pore size from around 32 µ to 48–64 µ after incorporation of silver nanoparticles. Degradation of the hydrogel was observed after 48 h when stored in PBS containing collagenase enzyme. In vitro cell culture experiments established absence of cytotoxicity in the hydrogel and nonadherence character to dermal fibroblasts. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44529.     

Preparation and antibacterial effects of PVA‐PVP hydrogels containing silver nanoparticles

The poly(vinyl alcohol)/poly(N‐vinyl pyrrolidone) (PVA–PVP) hydrogels containing silver nanoparticles were prepared by repeated freezing–thawing treatment. The silver content in the solid composition was in the range of 0.1–1.0 wt %, the silver particle size was from 20 to 100 nm, and the weight ratio of PVA to PVP was 70 : 30. The influence of silver nanoparticles on the properties of PVA–PVP matrix was investigated by differential scanning calorimeter, infrared spectroscopy and UV–vis spectroscopy, using PVA–PVP films containing silver particles as a model. The morphology of freeze‐dried PVA–PVP hydrogel matrix and dispersion of the silver nanoparticles in the matrix was examined by scanning electron microscopy. It was found that a three‐dimensional structure was formed during the process of freezing–thawing treatment and no serious aggregation of the silver nanoparticles occurred. Water absorption properties, release of silver ions from the hydrogels and the antibacterial effects of the hydrogels against Escherichia coli and Staphylococcus aureus were examined too. It was proved that the nanosilver‐containing hydrogels had an excellent antibacterial ability. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 125–133, 2007     

Preparation and characterization of acrylic acid/itaconic acid hydrogel coatings containing silver nanoparticles

Hydrogel silver nanocomposites have been used in applications with excellent antibacterial performance. Acrylic acid (AA)/itaconic acid (IA) hydrogels silver nanocomposites were prepared and applied as a coating on a textile substrate. Hydrogel matrices were synthesized first by the polymerization of an AA/IA aqueous (80/20 v/v) solution and mixed with 2‐2‐azobis(2‐methylpropionamide) diclorohydrate and N,N′‐methylene bisacrylamide until the hydrogel was formed. Silver nanoparticles were generated throughout the hydrogel networks with an in situ method via the incorporation of the silver ions and subsequent reduction with sodium borohydride. Cotton (C) and cotton/polyester (CP) textile fibers were then coated with these hydrogel silver nanocomposites. The influence of these nanocomposite hydrogels on the properties of the textile fiber were investigated by infrared spectroscopy (attenuated total reflectance), scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, and antibacterial tests against Pseudomona aeruginosa and Staphylococcus aureus. The better conditions, in which no serious aggregation of the silver nanoparticles occurred, were determined. It was proven that the textiles coated with hydrogels containing nanosilver had an excellent antibacterial abilities. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2713–2721, 2013     

Swelling kinetic study and characterization of crosslinked hydrogels containing silver nanoparticles

The ammonium persulfate induced polymerization of acrylamide in the presence of silver nitrate (AgNO₃) and N,N′‐methylenebisacrylamide as a crosslinking agent were used to prepare crosslinked hydrogels containing silver ions. Subjecting this hydrogel to reduction with sodium hydroxide brought to focus the nanosilver hydrogel composites. Characterization of the latter, including proof of existence of silver nanoparticles in the hydrogel, was made. The number of silver nanoparticles embedded in the hydrogel matrix was higher at higher concentration of AgNO₃ used in the preparation of the nanosilver hydrogel composite. The characterization was performed by the use of ultraviolet–visible spectroscopy and transmission electron microscopy. The swellability of the hydrogel containing nanosilver particles was also studied, and the dependence of the swellability on the abundance of silver nanoparticles in the hydrogel composite was verified. It was further disclosed that the kinetic model matched the experimental data; meanwhile, the diffusion of water into the hydrogel was non‐Fickian type. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Radiation synthesis, characterisation and antimicrobial application of novel copolymeric silver/poly(2-hydroxyethyl methacrylate/itaconic acid) nanocomposite hydrogels

Silver nanoparticles were fabricated via in situ reduction of silver nitrate embedded in swollen P(HEMA/IA) hydrogel, using gamma radiolysis method. Copolymeric hydrogels based on 2-hydroxyethyl methacrylate (HEMA) and itaconic acid (IA), previously synthesised by gamma radiation for wound dressing application, were used as a carrier and a stabilising agent, while ethyl alcohol was used as a free radical scavenger. The influence of different P(HEMA/IA) hydrogels and silver salt concentrations on the size and distribution of nanoparticles was investigated. The Ag/P(HEMA/IA) nanocomposites were characterised by high resolution scanning electron microscopy, energy dispersive spectroscopy, wide-angle X-ray diffraction, UV-Vis spectroscopy and swelling measurements. Escherichia coli (Gram-negative bacterium), Staphylococcus aureus (Gram-positive bacterium) and Candida albicans (fungus) were used to prove the antimicrobial properties of Ag/P(HEMA/IA) nanocomposites. The inhibition kinetics of bacteria growth was investigated by measuring the colony-forming unit. The antimicrobial effectiveness of the Ag/P(HEMA/IA) hydrogel nanocomposite was demonstrated even at small silver concentrations. P(HEMA/IA) hydrogels containing nanosilver particles was found suitable to be used as wound dressing.     

Preparation of antibacterial temperature‐sensitive silver‐nanocomposite hydrogels from N‐isopropylacrylamide with green tea

This article reports the temperature‐sensitive, green tea (GT)‐based silver‐nanocomposite hydrogels for bacterial growth inactivation. The temperature‐sensitive hydrogels were prepared via free‐radical polymerization using temperature‐sensitive N‐isopropylacrylamide (NIPAM) monomer with GT as the hydrogel matrix. The nanocomposite hydrogels were encapsulated with silver ions via swelling method, which was later reduced to silver nanoparticles using Azadirachta indica leaf extract. The temperature‐sensitive silver nanocomposite hydrogels were analyzed by using Fourier transforms infrared, UV–visible spectroscopy, differential scanning calorimetry–thermogravimetric analysis, X‐ray diffraction, scanning electron microscopy, and transmission electron microscopy. The prepared hydrogels exhibited higher phase volume transition temperature than the NIPAM. The inhibition zone study of the inactivation of bacteria on the developed hydrogels was carried out against Gram negative (Escherichia coli) and Gram positive (Staphylococcus aureus), which revealed that the prepared hydrogels are helpful for the inactivation of these bacteria due to the high stabilization of antibacterial properties of the silver nanoparticles. The developed hydrogels are promising for biomedical applications. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45739.     

In vitro and in vivo investigational studies of a nanocomposite‐hydrogel‐based dressing with a silver‐coated chitosan wafer for full‐thickness skin wounds

A nanocomposite reservoir‐type hydrogel dressing of poly vinyl alcohol (PVA) was fabricated by a freeze–thaw method and loaded with silver‐nanoparticle‐coated chitosan wafers (Ag–CHWs). The Ag–CHWs were synthesized by a sonication technique with silver nitrate (AgNO₃) and chitosan powder. Scanning electron microscopy images showed silver nanoparticles (AgNPs) with a size range of 10 ± 4 nm on the surface of the chitosan wafers, and the antibacterial efficacy (minimum inhibitory concentration) of the Ag–CHWs was measured against Pseudomonas aeruginosa (32 µg/mL), Staphylococcus aureus, (30 µg/mL) and Escherichia coli (32 µg/mL). The antimicrobial PVA hydrogel showed an improved tensile strength (～0.28 MPa) and gel content (～92%) in comparison with the blank hydrogels. Full‐thickness‐excision wound studies of the nanocomposite dressing on Wistar rats revealed enhanced wound contraction, improved inflammation response, re‐epithelization rate, neoangiogenesis, and granulation tissue formation in comparison to the control group. A flexible, biocompatible, nanocomposite reservoir dressing not only established the chitosan as a stabilizer but also proved the efficacious and safe utility of AgNPs toward chronic wound management. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43472.     

Physicochemical properties and antimicrobial activity of biocompatible carboxymethylcellulose‐silver nanoparticle hybrids for wound dressing and epidermal repair

Skin loss can be caused by accident, burn, trauma, chronic wounds, and diseases, which is severely aggravated by multidrug‐resistant bacterial infections. Soft hybrids based on biopolymers combined with silver nanoparticles (AgNPs) have potential applications as wound dressing supports and skin tissue repair. Thus, our study focused on the design, green synthesis, and comprehensive characterization of carboxymethyl cellulose (CMC–AgNP) nanocomposites for producing hydrogel membranes, with tunable physicochemical properties, cytocompatibility, and biocidal activity for potential application as wound dressing and skin repair. These nanocomposites were prepared using CMC with two degrees of carboxymethylation, distinct concentrations of citric acid (CA) crosslinker, and AgNPs by in situ chemical reduction, forming hybrid membranes by the solvent casting method. The results demonstrated that superabsorbent hydrogels were produced with swelling and degradation behaviors dependent on the concentration of CA crosslinker, degree of carboxymethylation of CMC, and content of AgNP in the matrices. Moreover, the Fourier transform infrared spectroscopy analysis evidenced that the CMC functional groups (e.g., ? COOH and ? OH) were directly involved in the chemical reactions for the formation of AgNPs and hydrogel crosslinking pathway. These nanocomposites were cytocompatible using in vitro 3‐(4,5‐dimethyl‐2‐thiazolyl)‐2,5‐diphenyltetrazolium bromide cell viability assay with of human embryonic kidney cells. Conclusively, the CMC–AgNP nanohybrids demonstrated to be simultaneously non‐toxic combined with highly effective antibacterial activity against gram‐positive multi‐resistant wound/skin pathogens (Staphylococcus aureus) and moderate effect towards gram‐negative strains (Escherichia coli and Pseudomonas aeruginosa). © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45812.     

Breathing‐in/breathing‐out approach to preparing nanosilver‐loaded hydrogels: Highly efficient antibacterial nanocomposites

The key objective of developing novel materials for hygienic living conditions is to lower the risk of transmitting diseases and biofouling. To this end, a number of silver–hydrogel nanocomposite systems are under development. In this study, we attempted a unique strategy to prepare silver‐nanoparticle‐loaded poly(acrylamide‐co‐N‐vinyl‐2‐pyrolidone) hydrogel composites. To load nanosilver particles into such a nonionic hydrogel, a novel breathing‐in/breathing‐out (BI–BO) approach was employed. As the number of BI–BO cycles increased, the amount of the silver nanoparticles loaded into these hydrogels also increased. This behavior was obvious and was confirmed by ultraviolet–visible spectroscopy and thermal analysis. Furthermore, the hydrogel–silver‐nanoparticle composites were confirmed with Fourier transform infrared spectroscopy and transmission electron microscopy studies. Antibacterial studies of these hydrogel–silver nanocomposites showed excellent results against Escherichia coli. The antibacterial activity increased with the number of BI–BO cycles, and samples that underwent three BI–BO cycles showed optimal bactericidal activity. The degree of crosslinking and the silver content had a great influence on the antibacterial efficacy. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of acrylamide-based copolymeric hydrogel–silver composites: Antimicrobial activities and inhibition kinetics against E. coli

A series of acrylamide (AAm)-based hydrogels containing acrylic acid, 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS), and vinyl imidazole (VI) comonomers were prepared by free radical polymerization. Silver nanoparticles were loaded to hydrogel systems through in situ reduction of silver nitrate in the presence of sodium borohydride as a reducing agent. The synthesized hydrogels and their composites were characterized using FTIR, scanning electron microscopy, EDX, and EDX-mapping. The antimicrobial activity of hydrogel–silver composite was determined using well agar and broth dilution tests. In the first stage, four different hydrogel–silver composites were evaluated against six different microorganisms using the well agar technique. The most effective hydrogel–silver composite among all tested was poly(AAm-co-VI-co-AMPS)-Ag, while the most sensitive and resistant microorganisms among all tested were Staphylococcus cerevisiae and S. aureus, respectively. Poly(AAm-co-VI-co-AMPS)-Ag composite was used in modeling the inhibition kinetic of Escherichia coli. The present study displays that hydrogel–silver composite has considerable antimicrobial activity, which deserves further investigation for use in clinic application and industrial processing.     

Nitrofurazone‐loaded PVA–PEG semi‐IPN for application as hydrogel dressing for normal and burn wounds

Hydrogels have been used in a wide variety of biomedical devises, particularly in the field of drug delivery, tissue engineering, and wound healing. In this study, a polyvinyl alcohol (PVA)–polyethylene glycol (PEG) semi‐interpenetrating hydrogel network (IPN)‐based wound dressing system containing nitrofurazone (NFZ) was synthesized by chemical crosslinking technique. The introduction of PEG to PVA matrix led to reduction in the water vapor transmission rate, which in‐turn resulted in improved healing activity. Drug‐loaded IPNs were prepared by mixing aqueous solution of NFZ with the optimized PVA–PEG formulation subsequent to the crosslinking step. The in vitro diffusion studies of NFZ indicated a relatively slow release of drug resulting from its microencapsulation in the polymeric matrix. Subsequently, in vivo wound healing efficacy toward acute and burn wound healing in experimental rats was investigated. Semi‐IPN hydrogel loaded with NFZ dressing improved the overall healing rate in both acute and burn wounds, as evidenced by significant increase in total protein, hydroxyproline and hexosamine contents. Histological examinations also correlated well with the biochemical findings. A faster wound contraction was also observed in hydrogel treated acute and burn wounds. The results indicated that PVA–PEG semi‐IPN hydrogel based dressing systems containing NFZ could be used as an effective wound dressing material. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Trehalose‐based hydrogel potentially useful for the skin burn treatment

The purpose of this work is the preparation of trehalose hydrogel for dermatological applications, particularly, for skin burn treatment. Trehalose is a disaccharide compound containing hydroxyl groups in its structure susceptible to derivatization. The obtained hydrogel was loaded once with hyaluronic acid, a fundamental component of connective tissue, and again with silver nitrate, an ingredient with antibacterial properties. The trehalose hydrogel was characterized by FTIR spectrometry and ¹H‐NMR. The hydrogel swelling characteristics and release studies of entrapped hyaluronic acid or silver nitrate were evaluated at two pH values: pH 4.5 mimicking physiological conditions and pH 6.5 simulating the burned skin condition. The antioxidant activity of not loaded hydrogel in inhibiting the lipid peroxidation was performed in rat‐liver microsomal membranes, induced in vitro by tert‐butyl hydroperoxide (tert‐BOOH). The results confirm the possibility that the trehalose hydrogel can find use in the treatment of various skin lesions, particularly in burn therapy. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44755.     

Antibacterial activity and cytotoxicity of hydrogel–nanosilver composites based on copolymers from 2‐acrylamido‐2‐methylpropanesulfonate sodium

In this research, we contributed to the search for potential hydrogel–silver dressings by generating hydrogel–silver nanoparticles (AgNPs) composites prepared by the dipping of the crosslinked hydrogel poly(N‐vinylpyrrolidone‐co‐2‐acrylamido‐2‐methylpropanesulfonate sodium) (1:1) and poly(acrylamide‐co‐2‐acrylamido‐2‐methylpropanesulfonate sodium) (1:1) into an aqueous suspension of citrate‐stabilized AgNPs. The composites obtained were evaluated by an antibacterial activity assay on Staphylococcus aureus and Escherichia coli and subjected to an in vitro cytotoxicity assay for human fibroblasts. The composite formed from the hydrogel poly(N‐vinylpyrrolidone‐co‐2‐acrylamido‐2‐methylpropanesulfonate sodium) with 3 mol % N,N‐methylene bisacrylamide showed the highest antibacterial activity and the least cytotoxicity among the composites tested; this makes it an excellent alternative as a potential dressing for the treatment of deep and exudative wounds. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39644.     

Silver/poly(N‐vinyl‐2‐pyrrolidone) hydrogel nanocomposites obtained by electrochemical synthesis of silver nanoparticles inside the polymer hydrogel aimed for biomedical applications

Silver nanoparticles were produced inside a poly(N‐vinyl‐2‐pyrrolidone) hydrogel (PVP) by an innovative method based on the electrochemical reduction of Ag⁺ ions within the swollen PVP hydrogel. UV‐visible spectroscopy showed the highest value of the absorbance intensity and the lowest values of the wavelength of the absorbance maximum and the full width at the half‐maximum absorbance for the Ag/PVP nanocomposite obtained at 200 V during 4 min. Cyclic voltammetry results suggested an adequate entrapment of the silver nanoparticles. The mechanical properties under bioreactor conditions of the Ag/PVP nanocomposite suggested the possibility of wound dressing application. Silver release from Ag/PVP nanocomposites was confirmed under static conditions as well as by their antimicrobial activity against Staphylococcus aureus. POLYM. COMPOS., 35:217–226, 2014. © 2013 Society of Plastics Engineers     

Development of microbial protective Kolliphor‐based nanocomposite hydrogels

In this scientific work, a novel class of antimicrobial nanocomposite hydrogels were designed and synthesized by chemical and environmentally bioprocess using Kolliphor, acrylamide, and mint leafs in order to achieve antiseptic property for wound applications. In the bioprocess approach, silver nitrate and gold chloride were nucleated with mint leafs in order to obtain effective free individual nano‐inorganic compounds to provide superior antibacterial assets. The formations of dual inorganic nanoparticles were confirmed by transmission electron microscopy, which indicated the size of nanoparticles in the range of approximately 3 ± 2 nm and without agglomeration. The formations of biomaterials were characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopic–energy dispersive spectrometric studies and their swelling properties were determined. Furthermore, the pure hydrogel and the dual inorganic nanocomposite hydrogels developed were tested for antibacterial activities. When compared with the neat hydrogel, the nanocomposite hydrogels significantly improved their anti‐bacterial activities on Bacillus bacterium. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42781.     

In vitro efficacy and toxicology evaluation of silver nanoparticle‐loaded gelatin hydrogel pads as antibacterial wound dressings

The silver nanoparticle (nAg)‐loaded gelatin hydrogel pads were prepared from 10 wt % gelatin aqueous solution containing silver nitrate (AgNO₃) at 0.75, 1.0, 1.5, 2.0, or 2.5 wt % by solvent‐casting technique. These AgNO₃‐containing gelatin solutions, that had been aged for 15, 12, 8, 8, and 8 h, respectively, showed noticeable amounts of the as‐formed nAgs, the size of which increased with an increase in the AgNO₃ concentration (i.e., from 7.7 to 10.8 nm, on average). The hydrogels were crosslinked with a glutaraldehyde aqueous solution (50 wt %, at 1 μL mL^?1). At 24 h of submersion in phosphate buffer saline (PBS) or simulated body fluid buffer (SBF) solution, about 40.5–56.4% or 44.4–79.6% of the as‐loaded amounts of silver was released. Based on the colony count method, these nAg‐loaded hydrogels were effective against Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa, with at least about 99.7% of bacterial growth inhibition. Unless they had been treated with a sodium metabisulfite aqueous solution, these hydrogels were proven, based on the indirect cytotoxicity evaluation, to be toxic to human's normal skin fibroblasts. Lastly, only the hydrogels that contained AgNO₃ at 0.75 and 1.0 wt % were not detrimental to the skin cells that had been cultured directly on them. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Radiation synthesis and characterization of poly(vinyl alcohol)/poly(N-vinyl-2-pyrrolidone) based hydrogels containing silver nanoparticles

A series of PVA/PVP based hydrogels at different compositions were prepared by gamma irradiation. The gel fraction degree of swelling were investigated. Highly stable and uniformly distributed silver nanoparticles have been obtained onto hydrogel networks. The morphology and structure of (PVA/PVP) hydrogel and dispersion of the silver nanoparticles in the polymeric matrix were examined by scanning electron microscopy (SEM) and infrared spectroscopy (FT-IR), respectively. The formation of silver nanoparticles has been confirmed by ultraviolet visible (UV–vis) spectroscopy. A strong characteristic absorption peak was found to be around 420 nm for the silver nanoparticles in the hydrogel nanocomposite. The X-ray diffraction pattern confirmed the formation of silver nanoparticles with average particle size of 12 nm. The diameter distribution of silver nanoparticles was determined by dynamic light scattering DLS. Transmission electron microscope (TEM) showed almost spherical and uniform distribution of silver nanoparticles through the hydrogel network and the mean size of silver nanoparticles ranging is 23 nm. The good swelling properties and antibacterial of PVA/PVP-Ag hydrogel suggest that it can be a good candidate as wound dressing.     

Preparation and properties of nanocomposite hydrogels containing silver nanoparticles by ex situ polymerization

A series of composite hydrogels containing silver nanoparticle used for bioadhesives were prepared from acrylic acid, poly(ethylene glycol) methyl ether acrylate, and silver nanoparticles through ex situ polymerization. Silver nanoparticles with a narrow size distribution were prepared by the reduction of a silver nitrate solution with ascorbic acid. The influence of the content of the silver nanoparticles in the hydrogels on the equilibrium swelling ratio, mechanical properties, electrical conductivity, and inactivation of Escherichia coli (E. coli) was investigated in this study. The results showed that the swelling ratios of the composite gels were reduced by silver nanoparticles in the gels but were not reduced with an increase in the content of silver nanoparticles. In addition, the crosslinking density and shear modulus of these hydrogels did not increase with an increase in the content of silver nanoparticles. The adhesive force of these hydrogels (the APECAg series) was not obviously changed. Finally, the initial rate of E. coli inactivation for the APECAg series hydrogels showed excellent antibacterial properties. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3653–3661, 2006     

Synthesis and swelling behavior of thermosensitive IPN hydrogels based on sodium acrylate and N‐isopropyl acrylamide by a two‐step method

A series of interpenetrating polymer network (IPN) hydrogels having higher swelling ratio (SR) and thermosensitivity were synthesized from sodium acrylate (SA) and N‐isopropyl acrylamide (NIPAAm) by a two‐step method. A series of the porous poly(sodium acrylate ‐co‐1‐vinyl–2‐pyrrolidone) [poly(SA‐co‐VP)], (SV), hydrogels were prepared from acrylic acid having 90% degree of neutralization and VP monomer in the first step. The second step is to immerse the SV dried gels into the NIPAAm solution containing initiator, accelerator, and crosslinker to absorb NIPAAm solution and then polymerized to form the poly(SA‐co‐VP)/poly(NIPAAm) IPN hydrogels (SVN). The effect of the different molar ratios of SA/VP and the content of NIPAAm on the swelling behavior and physical properties of the SVN hydrogels was investigated. Results showed that the SVN hydrogels displayed an obviously thermoreversible behavior when the temperature turns across the critical gel transition temperature (CGTT) of poly(NIPAAm) hydrogel. The pore diameter distributions inside the hydrogel also indicated that the pore sizes inside the SVN hydrogels were smaller than those inside the SV hydrogels. At the same time, the more proportion of SA was added into the hydrogel, the larger pore diameter of the SV hydrogel was formed. The results also showed that the SR decreased with an increase of the VP content in the SV hydrogel and more obviously decreased in the SVN hydrogels. The SVN networks also showed stronger shear moduli than SV hydrogels. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013