Ag nanoparticles loaded TiO2/MWCNT ternary nanocomposite: A visible-light-driven photocatalyst with enhanced photocatalytic performance and stability

A visible light active photocatalyst, Ag/TiO₂/MWCNT was synthesized by loading of Ag nanoparticles onto TiO₂/MWCNT nanocomposite. The photocatalytic activity of Ag/TiO₂/MWCNT ternary nanocomposite was evaluated for the degradation of methylene blue dye under UV and visible light irradiation. Ag/TiO₂/MWCNT ternary nanocomposite exhibits (~9 times) higher photocatalytic activity than TiO₂/MWCNT and (~2 times) higher than Ag/TiO₂ binary nanocomposites under visible light irradiation. The enhancement in the photocatalytic activity is attributed to the synergistic effect between Ag nanoparticles and MWCNT, which enhance the charge separation efficiency by Schottky barrier formation at Ag/TiO₂ interface and role of MWCNT as an electron reservoir. Effect of different scavengers on the degradation of methylene blue dye in the presence of catalyst has been investigated to find the role of photogenerated electrons and holes. Simultaneously, the Ag/TiO₂/MWCNT shows excellent photocatalytic stability. This work highlights the importance of Ag/TiO₂/MWCNT ternary nanocomposite as highly efficient and stable visible-light-driven photocatalyst for the degradation of organic dyes.     

Combination of sonochemical and freeze-drying methods for synthesis of graphene/Ag-doped TiO2 nanocomposite: A strategy to boost the photocatalytic performance via well distribution of nanoparticles between graphene sheets

Preparation of visible-light active photocatalysts for efficient degradation of pollutants from the industrial wastewater has received considerable attention in recent decades. The present study introduces a new sonochemical route for the preparation of graphene/TiO₂/Ag nanocomposite for visible-light photocatalytic degradation of X6G (C.I. Reactive Yellow 2), a commonly used textile azo-dye. The obtained graphene/TiO₂/Ag nanocomposite is extracted from the reaction solution by two drying methods: (1) conventional centrifuging and drying, and (2) freeze drying. Both of the dried samples are calcinated at 500 °C. The TEM images reveal that distribution of TiO₂/Ag nanoparticles within the graphene sheets in the freeze dried nanocomposite is better than the conventional dried sample. Furthermore, the freeze dried nanocomposite has higher photocatalytic activity than the other nanocomposite. In conventional centrifuging and drying method, some of the TiO₂/Ag nanoparticles are gradually pushed out from the graphene sheets during the drying process and graphene layers are stacked, therefore the dispersion effect of sonication is destroyed. However, in the freeze dried nanocomposite, because of the fast freezing of the sonicated sample by liquid N₂, the TiO₂/Ag nanoparticles are kept between the graphene sheets and calcination process attached and fixed them to the graphene, preserving the dispersion effect of sonication.     

Synthesis of a montmorillonite‐supported titania nanocomposite with grafted cellulose as a template and its application in photocatalytic degradation

We report a study on the synthesis of anatase titania (TiO₂) particles with the sol–gel method at room temperature. We immobilized the particles on a grafted‐cellulose intercalated montmorillonite (MMT). This nanocomposite, cellulose‐g‐poly(4‐vinyl pyridine)/MMT/TiO₂, could be applied in the photocatalytic degradation of organic pollutants efficiently because of the addition of a sorbent, the grafted cellulose. The synthesized nanocomposite was characterized with Fourier transform infrared spectroscopy, X‐ray diffraction, scanning electron microscopy, and transmission electron microscopy. Methyl orange was used as a model molecule to study photocatalytic degradation. The nanocomposite exhibited a better photocatalytic activity than in the absence of the grafted cellulose. The kinetics of the photocatalytic degradation could be described by pseudo‐first‐order rate law. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42627.     

The dependence of the photocatalytic activity of TiO2/carbon nanotubes nanocomposites on the modification of the carbon nanotubes

Nanostructural TiO₂/modified multi-wall carbon nanotubes photocatalysts were prepared by hydrolysis of Ti(iso-OC₃H₇)₄ providing chemical bonding of anatase TiO₂ nanoparticles onto oxidized- or amino-functionalized multi-wall carbon nanotubes (MWCNT). The processes of functionalization of the MWCNT and the deposition of TiO₂ influence the photocatalytic activity of the synthesized nanocomposites. The phase composition, crystallite size, and the structural and surface properties of the obtained TiO₂/modified-MWCNT nanocomposite were analyzed from XRD, FEG-SEM, TEM/HRTEM and FTIR data, as well low temperature N₂ adsorption. In the photocatalytic study, the TiO₂/oxidized-MWCNT catalyst showed the highest and the TiO₂/amino functionalized-MWCNT catalysts somewhat lower degradation rates, indicating that the enhancement of photocatalysis was supported by the more effective electron transfer properties of the oxygen- than amino-containing functional groups, which support the efficient charge transportation and separation of the photogenerated electron-hole pairs.     

A multifunctional Ag/TiO2/reduced graphene oxide with optimal surface-enhanced Raman scattering and photocatalysis

A multifunctional Ag/TiO₂/reduced graphene oxide (rGO) ternary nanocomposite was prepared by a one-step photochemical reaction with TiO₂ and Ag nanoparticles successively deposited on reduced graphene oxide. The structure, morphology, composition, optical, and photoelectrochemical properties of Ag/TiO₂/rGO were investigated in detail. Meanwhile, the ternary nanocomposite possessed much higher adsorption capacity to organic dyes compared with bare TiO₂ and binary Ag/TiO₂, which would help to its use for surface-enhanced Raman scattering detection and photocatalytic degradation. Due to the charge transfer between rGO and organic dyes and enhanced electromagnetic mechanism of Ag, Ag/TiO₂/rGO nanocomposites as surface-enhanced Raman scattering substrates demonstrated dramatically improved sensitivity and good uniformity. The detection limit of rhodamine 6G (R6G) was as low as 10⁻⁹ mol/L, and the relative standard deviation values of the intensities remained below 5%. Most importantly, the synergistic coupling effect of three components extended the photoresponse range and accelerated separation of the electron-hole pairs, leading to greatly improved photocatalytic activity under simulated sunlight. The maximum rate constant (k, 0.06243 min⁻¹) of Ag/TiO₂/rGO was 50 and four times higher than that of TiO₂ and Ag/TiO₂, respectively.     

Preparation of transparent PVA/TiO2 nanocomposite films with enhanced visible-light photocatalytic activity

Polymer/semiconductor oxide nanocomposite films have been intensively investigated for various applications. In this work, we reported a simple hydrothermal method to fabricate highly transparent poly(vinyl alcohol)/titanium dioxide (PVA/TiO₂) nanocomposite films with enhanced visible-light photocatalytic activity. The as-prepared PVA/TiO₂ nanocomposite films showed high optical transparency in the visible region even at a high TiO₂ content (up to 40 wt.%). The determination of photocatalytic activity by photodegradation of methyl orange (MO) and colorless phenol showed that PVA/TiO₂ nanocomposite films exhibited enhanced visible-light photocatalytic activity and excellent recycle stability. This work provided new insights into fabrication of polymer/TiO₂ nanocomposites as high performance photocatalysts in waste water treatment.     

One-pot synthesis of CdS sensitized TiO2 decorated reduced graphene oxide nanosheets for the hydrolysis of ammonia-borane and the effective removal of organic pollutant from water

A hybrid material of reduced graphene oxide (RGO) sheets decorated with CdS-TiO₂ NPs was prepared through a facile one-pot hydrothermal method. The assembly of CdS-TiO₂ nanoparticles (NPs) on RGO sheets was in-situ produced. As-synthesized nanocomposites were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), energy disperse X-ray spectrum (EDS), fourier transform infrared spectroscopy (FTIR), and photoluminescence spectroscopy (PL). The obtained nanocomposites exhibited a good photocatalytic activity for the visible-light-induced decomposition of methylene blue (MB) dye and hydrolysis of ammonia borane. The results showed that by incorporation of CdS and TiO₂ NPs on graphene oxide sheets the photocatalytic efficiency was enhanced. The significant enhancement in the photocatalytic activity of CdS-TiO₂/RGO nanocomposites under visible light irradiation can be ascribed to the effect of CdS by acting as electron traps in TiO₂ band gap. Reduced graphene oxide worked as the adsorbent, electron acceptor and a photo-sensitizer to efficiently enhance the dye photo decomposition. Such nanocomposite photocatalyst might find potential application in a wide range of fields, including hydrogen energy generation, air purification, and wastewater treatment.     

Synthesis of carbon quantum dots/TiO2 nanocomposite for photo-degradation of Rhodamine B and cefradine

Pure TiO₂ and carbon quantum dots (CQDs)-doped TiO₂ nanocomposite (CQDs/TiO₂ nanocomposite) were prepared by a sol-gel approach for photocatalytic removal of Rhodamine B and cefradine. Analyses by Transmission electronmicroscopy (TEM), scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), UV–visible spectroscopy and X-ray powder diffraction (XRD) confirmed the successful formation of CQDs/TiO₂ heterostructure. The as-prepared TiO₂ and CQDs/TiO₂ composite possessed small particles, spherical-like shape, and anatase crystal form. Meanwhile, Rhodamine B and cefradine were chosen to evaluate the photocatalytic activity of TiO₂ and CQDs/TiO₂ composite. Results revealed that with the facile decoration of CQDs, the absorption of photocatalyst was extended into visible light region and photocatalytic activity was improved in comparison with pure TiO₂. Furthermore, the mechanism for the improvement of the photocatalytic performance of the composites was discussed on the basis of the results. CQDs play an important role in the photocatalytic process, due to their superior ability to extend the visible absorption and produce more electrons and electron–hole pairs for the degradation of pollutants. In all, the paper offers further insights into the development of CQDs/TiO₂ nanocomposite as photocatalyst for the degradation of antibiotics.     

Charge transfer properties and photoelectrocatalytic activity of TiO2/MWCNT hybrid

The vertically aligned multiwalled carbon nanotube (MWCNT) arrays on tantalum foils were successfully coated with TiO₂ nanoparticles by a hydrothermal process. The prepared TiO₂/MWCNT hybrid was characterized by scanning electron microscopy and transmission electron microscopy. The charge transfer properties and photocatalytic degradation of rhodamine B with and without bias potential under UV irradiation were investigated. The MWCNTs promoted the separation of photoinduced carriers in the TiO₂, thus enhanced photocatalytic activity. Applying bias potential on the photoanode further enhanced its catalytic activity. The efficient charge transportation and high photoelectrocatalytic activity towards degradation of rhodamine B made this hybrid material promising for photocatalyst and for the development of photoelectrical devices.     

Enhanced Solid‐Phase Photocatalytic Degradation Activity of a Poly(vinyl chloride)‐TiO2 Nanocomposite Film with Bismuth Oxyiodide

A new type of photodegradable poly(vinyl chloride)‐bismuth oxyiodide/TiO₂ (PVC‐BiOI/TiO₂) nanocomposite film was prepared by embedding a nano‐TiO₂ photocatalyst modified by BiOI into the commercial PVC plastic. The solid‐phase photocatalytic degradation behavior of the as‐prepared film was investigated in ambient air at room temperature under UV light irradiation, with the aid of UV‐Vis spectroscopy, weight loss monitoring, scanning electron microscopy, and FT‐IR spectroscopy. Compared to the PVC‐TiO₂ nanocomposite film, the PVC‐BiOI nanocomposite film and the pure PVC film, the PVC‐BiOI/TiO₂ nanocomposite film exhibited a higher photocatalytic degradation activity. The optimal mass ratio of BiOI to TiO₂ was found to be 0.75 %. The weight loss rate of the PVC‐BiOI/TiO₂ nanocomposite film reached 30.8 % after 336 h of irradiation, which is 1.5 times higher than that of the PVC‐TiO₂ nanocomposite film under identical conditions. The solid‐phase photocatalytic degradation mechanism of the nanocomposite films was briefly discussed.     

Comparative study of gamma and ion beam irradiation of polymeric nanocomposite on electrical conductivity

Poly(vinyl alcohol) (PVA) was used to prepare nanocomposites of multi‐wall carbon nanotubes (MWCNT) and functionalized carbon nanotubes (MWCNT‐NH₂) in existence of 2‐carboxyethyl acrylate oligomers (CEA). Radiation‐induced crosslinking of the prepared matrix was carried out via gamma and ion beam irradiation. A comparative study of gamma and ion beam irradiation effect on the electrical conductivity of nanocomposite was conducted. The gelation of the gamma irradiated matrix outperforms the ion beam irradiated matrix. The order of gelation is PVA > (PVA/CEA) > (PVA/CEA)‐MWCNT > (PVA/CEA)‐MWCNT‐NH₂. There is a significant reduction in the swelling of the nanocomposite. The formation of nanocomposites was confirmed by scanning electron microscopy, energy‐dispersive X‐ray (EDX) and FTIR examinations. The direct current electrical properties of PVA/nanocomposites are examined at room temperature by applying electric voltage from 1 to 20 V. The results revealed that the electrical conductivity is increased by adding the carbon nanotubes and irradiation by gamma and ion beam. At an applied electric voltage 20 V, in the electrical conductivity of the unirradiated PVA was from 9.20 × 10^?8 S cm^?1. After adding MWCNT an increase up to 4.70 × 10^?5 S cm^?1 was observed. While after ion beam irradiation, a further increase up to 9.30 × 10^?5 S cm^?1 was noticed. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46146.     

One-pot self-assembled TiO2/graphene/poly(acrylamide) superporous hybrid for photocatalytic degradation of organic pollutants

We report the development of TiO₂/graphene/poly(acrylamide) superporous hybrid by a radical polymerization reaction and explore its environmental application as photocatalyst of organic pollutants. During the polymerization reaction, graphene nanosheets and TiO₂ nanoparticles homogeneously distribute on the hydrogel, in which TiO₂ nanoparticles with a uniform size are densely anchored onto graphene and self-assembled into different structures with various graphene contents. The resultant TiO₂/graphene/poly(acrylamide) superporous hybrid experiences tremendous adsorption toward dye pollution before photodegradation, and it also displays similar photodecomposition efficiency with pristine TiO₂. Moreover, the TiO₂/graphene/poly(acrylamide) superporous hybrid is recyclable, which demonstrates the potential of hybrid as an attractive photocatalyst for wastewater treatment. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47033.     

Graphene-supported flocculent-like TiO2 nanostructures for enhanced photoelectrochemical activity and photodegradation performance

Here, novel graphene/TiO₂ nanocomposite has been successfully prepared by loading flocculent-like titanate nanostructure in graphene sheets via hydrothermal method plus a subsequent annealing process. The as-obtained hybrid was characterized by X-ray diffraction, scanning electron microscopy with an energy dispersive spectroscope (EDS), Raman, and UV–vis diffuse reflectance spectra, respectively. The photoelectrochemical activities and photocatalytic degradation performance of methyl orange under the illumination of ultraviolet light were investigated, and the flocculent-like TiO₂/graphene composites was found to have a superior photocatalytic activity compared to flocculent-like titanate nanostructure and commercial anatase TiO₂ powder, which can be attributed to the improved light absorption and extremely efficient charge separation of the hybrid structure. The results suggest that the as-prepared flocculent-like TiO₂/graphene composite is a promising photocatalyst for photoelectrochemical hydrogen production and pollution removal.     

Preparation of poly(vinyl alcohol)/poly(acrylic acid)/TiO2/carbon nanotube composite nanofibers and their photobleaching properties

The composite nanofibers of poly(vinyl alcohol) (PVA)/poly(acrylic acid) (PAAc)/titanium(IV) oxide (TiO₂) were prepared by electrospinning for a novel photocatalytic treatment of waste water. To improve the photoelectronic properties of PVA/PAAc/TiO₂ composite nanofibers, carbon nanotubes (CNTs) were used as an additive. The TiO₂ and CNTs were immobilized in the PVA/PAAc hydrogels as electrospun nanofibers for an easier recovery after the wastewater treatment. The improved efficiency of pollutant dye removal was observed at pH 10 due to the pH-sensitive swelling behavior of the PVA/PAAc/TiO₂/CNTs composite nanofibers. The photocatalytic activity of TiO₂ was improved noticeably by applying electric field to the CNTs-embedded composite nanofibers.     

Photo-catalytic degradation of Metanil Yellow dye using TiO2 immobilized into polyvinyl alcohol/acrylic acid microgels prepared by ionizing radiation

Polyvinyl alcohol (PVA) microgels were prepared using electron beam irradiation. To improve the PVA microgel functionality and gel fraction, chains of polyacrylic acid (PAA) were incorporated into PVA microgel by radiation grafting technique. The increase in the acrylic acid (AA) content as well as PVA Mwt is accompanied by a mutual increase in the gel fraction and a decrease in the swelling%. Immobilization of different TiO₂ concentrations on the surface of the prepared PVA–AA microgel was carried out. The structural changes in the prepared PVA–AA microgel immobilized with TiO₂/were investigated using FTIR, EDX and XRD. Photodegradation efficiency of TiO₂/PVA–AA microgel against metnil yellow dyes was studied. TiO₂/PVA–AA microgel activity increases with the increase of the amount of TiO₂ and results in an increase in the rate of the photodegradation reaction. Easily recovery and reusability made TiO₂/PVA/AA of great important in practice use as a photocatalytic degradation composite, for dye removal from wastewater.     

Photosensitive antibacterial and cytotoxicity performances of a TiO2/carboxymethyl chitosan/poly(vinyl alcohol) nanocomposite hydrogel by in situ radiation construction

Nano‐TiO₂/carboxymethyl chitosan (CMCS)/poly(vinyl alcohol) (PVA) ternary nanocomposite hydrogels were prepared by freezing–thawing cycles and electron‐beam radiation with PVA, CMCS, and nano‐TiO₂ as raw materials. The presence of nano‐TiO₂ nanoparticles in the composite hydrogels was confirmed by thermogravimetry, Fourier transform infrared spectroscopy, and X‐ray powder diffraction. Field emission scanning electron microscopy images also illustrated that the TiO₂/CMCS/PVA hydrogel exhibited a porous and relatively regular three‐dimensional network structure; at the same time, there was the presence of embedded nano‐TiO₂ throughout the hydrogel matrix. In addition, the nano‐TiO₂/CMCS/PVA composite hydrogels displayed significant antibacterial activity with Escherichia coli and Staphylococcus aureus as bacterial models. The antibacterial activity was demonstrated by the antibacterial circle method, plate count method, and cell density method. Also, with the Alamar Blue assay, the cytotoxicity of the composite hydrogel materials to L929 cells was studied. The results suggest that these materials had no obvious cytotoxicity. Thus, we may have developed a novel, good biocompatibility hydrogel with inherent photosensitive antibacterial activity with great potential for applications in the fields of cosmetics, medical dressings, and environmental protection. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44150.     

Study of the effect of rutile/anatase TiO2 nanoparticles synthesized by hydrothermal route in electrospun PVA/TiO2 nanocomposites

Mixed rutile–anatase TiO₂ nanoparticles were synthesized by hydrothermal treatment under acidic conditions and incorporated into poly(vinyl alcohol) (PVA). These nanocomposites were electrospun to produce nanofibers of PVA/TiO₂, which were characterized by scanning electron microscopy, transmission electron microscopy, X‐ray diffraction (XRD), UV–vis diffuse reflectance spectroscopy, thermogravimetric analysis, and differential scanning calorimetry. The photocatalytic degradation of Rhodamine B and degradation of the polymer by UV‐C lamps were also investigated. The results showed that TiO₂ nanoparticles did not change the morphology and thermal behavior of the nanofiber polymer, but were effective in modifying the UV absorption of PVA without reducing its stability. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Photocatalytic activity of TiO2 supported on multi-walled carbon nanotubes under simulated solar irradiation

TiO₂ particles supported on multi-walled carbon nanotubes (MWCNTs) were prepared using a sol–gel method to investigate their photocatalytic activity under simulated solar irradiation for the degradation of methyl orange (MO) in aqueous solution. The prepared composites were analyzed using XRD, SEM, EDS and UV–vis absorption spectroscopy. The results of this study indicated that there was little difference in the shape and structure of MWCNTs/TiO₂ composite and pure TiO₂ particles. The composite exhibited enhanced absorption properties in the visible light range compared to pure TiO₂. The degradation of MO by MWCNTs/TiO₂ composite photocatalysts was investigated under irradiation with simulated solar light. The results of this study indicated that MWCNTs played a significant role in improving photocatalytic performance. Different amounts of MWCNTs had different effects on photodegradation efficiency, and the most efficient MO photodegradation was observed for a 2% MWCNT/TiO₂ mass ratio. Photocatalytic reaction kinetics were described using the Langmuir–Hinshelwood (L–H) model. The photocatalyst was reused for eight cycles, and it retained over 95.2% photocatalytic degradation efficiency. Possible decomposition mechanisms were also discussed. The results of this study indicated that photocatalytic reactions with TiO₂ particles supported on MWCNTs under simulated solar light irradiation are feasible and effective for degrading organic dye pollutants.     

Employment of ultrasonic waves for the preparation of PVA/TiO2‐BSA nanocomposites: Mechanical,thermal, and optical properties

The goal of this project is to obtain poly(vinyl alcohol) (PVA)/TiO₂‐bovine serum albumin (BSA) nanocomposite (NC) films in different weight percentages of modified TiO₂. For this purpose, to prevent the accumulation of nanoparticles (NPs) in the PVA matrix, the surface of the TiO₂ NPs was treated with the BSA molecules. To achieve this aim, ultrasonic waves were used as an environmentally friendly and green process that decrease the time of reactions, help better spreading of TiO₂ NPs and maintain dimensions of TiO₂ NPs in the nanoscale range. In the end, the features of the PVA/TiO₂‐BSA NC films were considered with a variety of techniques. The Fourier transform infrared spectroscopy, energy dispersive X‐ray, and X‐ray diffraction showed that the BSA was well placed on the surface of TiO₂ NPs. The thermal gravimetric analysis and UV‐visible results demonstrated that all the PVA/TiO₂‐BSA NC films have better thermal and optical properties than the pure PVA. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46558.