共查询到19条相似文献,搜索用时 328 毫秒
1.
3.
4.
几种含α-官能团的二硅氧烷的合成与表征 总被引:1,自引:1,他引:0
以氯甲基二甲基氯硅烷为原料制备了几种含官能团的二硅氧烷封端剂.将氯甲基二甲基氯硅烷在50%乙醇水溶液中水解,可得到85%收率的1,3-双氯甲基-1,1,3,3-四甲基二硅氧烷(产物Ⅰ);产物Ⅰ同醋酸和三乙胺在对二甲苯中回流18 h,得到90%收率的1,3-双乙酰氧甲基-1,1,3,3-四甲基二硅氧烷(产物Ⅱ);在盐酸催化下,产物Ⅱ同过量甲醇在室温下进行酯交换反应24 h,得到约80%收率的1,3-双羟甲基-1,1,3,3-四甲基二硅氧烷.用1H NMR、GC-MS、IR、元素分析等方法对产物进行了表征,以确定产物的含量、结构和主要副产物的结构,简单探讨了反应的影响因素. 相似文献
5.
用1,3-二(二甲基氯硅烷基)-2,2,4,4-四甲基环二硅氮烷与二苯基二氯硅烷反应,得1,3-二(二苯基氯硅烷基)-2,2,4,4-四苯基环二硅氮烷,用甲苯与正辛烷提纯化合物,熔点200~206℃,收率75%~78%。产品经IR和1H NMR确证了结构,用示差扫描量热法(DSC)与偏光显微镜分析,发现该化合物具有液晶性,属于热致型液晶,显示六方相。经教育部科技查新工作站(L03)2007年11月22日出具的第2007236号《科技查新报告》证实,在国内文献中未见关于1,3-二(二苯基氯硅烷基)-2,2,4,4-四苯基环二硅氮烷液晶性表征的相关报道。 相似文献
6.
以水为溶剂,1,3-环己二酮与甲醛和二甲胺进行Mannich反应,生成2-亚甲基(1,3-环己二酮),该生成物进而与1,3-环己二酮经Michael缩合,得到2,2'-亚甲基双(1,3-环己二酮)粗产物,将其采用弱碱中和的简单分离方法进行提纯,所得最终产物中2,2'-亚甲基双(1,3-环己二酮)纯度为99.8%(质量分数),收率为92.8%;考察了反应温度、时间、pH及提纯用碱的种类对反应产物收率和纯度的影响;最佳制备条件为:20℃、2.5 h、pH=6、弱碱NaHSO3中和,整个制备过程操作简单,成本较低. 相似文献
7.
8.
2,4-二氯苯乙酮经溴化得ω-溴-2,4-二氯苯乙酮,该化合物与丙三醇在对甲基苯磺酸催化下脱水,得2-(2,4-二氯苯基)-2-溴甲基-4-羟甲基-1,3-二氧戊环,该中间体与苯甲酰氯在常温下反应,合成了2-(2,4-二氯苯基)-2-溴甲基-4-苯甲酰氧基甲基-1,3-二氧戊环,然后与三氮唑钠盐在130℃反应36 h,之后在碱性条件下水解,获得1-[2-(2,4-二氯苯基)-4-羟甲基-1,3-二氧戊环-2-基]甲基-1H-1,2,4-三氮唑,再以吡啶为缚酸剂继续与甲磺酰氯反应,合成了1-[2-(2,4-二氯苯基)-4-甲磺酰氧基甲基-1,3-二氧戊环-2-基]甲基-1H-1,2,4-三氮唑,最后在碱性条件下,与12个不同结构的酚缩合成标题化合物1-[2-(2,4-二氯苯基)-4-烃氧基甲基-1,3-二氧戊环-2-基]甲基-1H-1,2,4-三氮唑。标题化合物的结构用GC-MS、FTIR进行了表证。生物活性实验结果表明,12个标题化合物对水稻稻瘟病菌的抑菌率均在88.0%以上,其中,1-[2-(2,4-二氯苯基)-4-间甲基苯氧基甲基-1,3-二氧戊环-2-基]甲基-1H-1,2,4-三氮唑达100%。1-[2-(2,4-二氯苯基)-4-苯氧基甲基-1,3-二氧戊环-2-基]甲基-1H-1,2,4-三氮唑和1-[2-(2,4-二氯苯基)-4-对硝基苯氧基甲基-1,3-二氧戊环-2-基]甲基-1H-1,2,4-三氮唑对油菜菌核病菌的抑菌率分别为100%和97.8%;1-[2-(2,4-二氯苯基)-4-间甲基苯氧基甲基-1,3-二氧戊环-2-基]甲基-1H-1,2,4-三氮唑对小麦赤霉病菌的抑制活性为91.2%。 相似文献
9.
10.
11.
12.
13.
1,3-二乙酰氧基-2-乙酰氧基甲氧基丙烷的合成 总被引:1,自引:0,他引:1
以环氧氯丙烷为起始原料与浓盐酸反应制得1,3-二氯-2-丙醇,再在浓硫酸催化下与多聚甲醛缩合得1,3-二氯-2-丙醇的半缩甲醛,不经分离,直接用醋酐酰化得1,3-二氯-2-乙酰氧基甲氧基丙烷,后者与醋酸钠反应得标题化合物。以环氧氯丙烷计4步反应总收率为55.6%。 相似文献
14.
1,3‐Dichloro‐1,1,3,3‐tetraphenyldisilazane (DCTPS) with 71.6% yield was synthesized by the reaction of hexaphenylcyclotrisilazane (HPCT) with Ph2SiCl2 catalyzed by dibutyltin dilaurate. A ring‐closure reaction of DCTPS was carried out with BuLi in xylene–hexane mixture solvent; 1,3‐bis(chlorodiphenylsilyl)‐2,2,4,4‐tetraphenyl‐cyclodisilazane (BcPTPC) with 73.2% yield was obtained. Hydrolysis of BcPTPC in ether–triethylamine solvent resulted in 71.9% yield of 1,3‐bis(diphenylhydroxysilyl)‐2,2,4,4‐tetraphenylcyclodisilazane (BHPTPC). By condensation polymerization of BHPTPC with α,ω‐bis(diethylamino)‐oligo‐dimethylsiloxane, a kind of alternate copolymer constructed by 1,3‐bis(diphenylsilyl)‐2,2,4,4‐tetraphenylcyclodisilazane units with oligo‐dimethylsiloxane segments [P(BPTPC‐alt‐ODMS)] was synthesized. BcPTPC, BHPTPC as well as P(BPTPC‐alt‐ODMS) were characterized by 29Si‐NMR spectra, FT‐IR spectra, and elemental analysis. DGA study shows that P(BPTPC‐alt‐ODMS)s are thermally stable. The thermal decomposition onsets of P(BPTPC‐alt‐ODMS)s are all above 520°C. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1484–1490, 2005 相似文献
15.
2,2-二(溴甲基)-1,3-丙二醇的合成 总被引:4,自引:0,他引:4
以季戊四醇和40%氢溴酸溶液为原料,冰醋酸为催化剂,经取代反应、减压分离、纯化和干燥等步骤合成了具有优良性能的反应型阻燃剂2,2 二(溴甲基) 1,3 丙二醇,以季戊四醇计,产品收率为80.8%。实验确定了氢溴酸与季戊四醇的最佳摩尔比为2.5∶1,最佳反应时间为6~8h,最佳反应温度为回流温度。先用等体积的甲苯和水混合物分离合成产物,再用热水重结晶进行纯化。经元素分析、熔点测定和红外光谱分析予以确证。 相似文献
16.
以硝基甲烷和四醛为原料,在碱性条件下经烷基羟基化和溴化两步合成2-溴-2-硝基-1,3-二丙二醇,考虑了烷基羟基化反应,溴化反应温度,时间,对产品收率的影响.收率可达78.6% 相似文献
17.
合成了二(2-氧代-5,5-二甲基-1,3-二氧杂-2-磷杂环己基)氧化磷,用元素分析、IR、^1HNMR和MS等分析方法表征了它的组成和结构,解释了其谱图现象。 相似文献
18.
Vahuni Karapetyan Satenik Mkrtchyan Andreas Schmidt OrazioA. Attanasi Gianfranco Favi Fabio Mantellini Alexander Villinger Christine Fischer Peter Langer 《Advanced Synthesis \u0026amp; Catalysis》2008,350(9):1331-1336
In a convenient one‐pot process, the easily accessible 1,2‐diaza‐1,3‐butadienes and 1,3‐bis(silyl enol ethers) are converted into the previously unknown functionalized 1‐aminopyrroles and 1‐amino‐4,5,6,7‐tetrahydroindoles. The domino reaction proceeds through a zinc chloride‐catalyzed ‘conjugate addition/cyclization’ sequence. 相似文献
19.
Orazio A. Attanasi Stefano Berretta Lucia De Crescentini Gianfranco Favi Gianluca Giorgi Fabio Mantellini Simona Nicolini 《Advanced Synthesis \u0026amp; Catalysis》2011,353(4):595-605
The zinc(II) triflate‐catalyzed synthesis of highly functionalized pyrroles is described. The sequence involves the preliminary preparation of α‐aminohydrazones by Michael addition of primary amines to 1,2‐diaza‐1,3‐dienes. The treatment of these intermediates with dialkyl acetylenedicarboxylates produces α‐(N‐enamino)‐hydrazones that are converted into the corresponding pyrroles. The substituents on the carbon in position four of 1,2‐diaza‐1,3‐dienes drive the regioselectivity of the ring closure process. Starting from 4‐aminocarbonyl‐1,2‐diaza‐1,3‐dienes only dialkyl 1‐substituted 5‐aminocarbonyl‐1H‐pyrrole‐2,3‐dicarboxylates are achieved by Lewis acid‐catalyzed ring closure. A screening of several Lewis/Brønsted acid catalysts is performed. Zinc(II) triflate is the most efficient catalyst. Under similar reaction conditions, employing 4‐alkoxycarbonyl‐1,2‐diaza‐1,3‐dienes, only 4‐hydroxy‐1H‐pyrrole‐2,3‐dicarboxylates are synthesized. These latter reactions can be accomplished regioselectively also in one pot. Using 4‐aminocarbonyl‐1,2‐diaza‐1,3‐dienes, diamines and dialkyl acetylenedicarboxylates the sequence provides the corresponding α,ω‐di(N‐pyrrolyl)alkanes. 相似文献