Headspace Single Drop Microextraction Using Micellar Ionic Liquid Extraction Solvents

A headspace single drop microextraction (SDME) method using extraction solvents comprised of micellar ionic liquids (ILs) was used to perform the extraction of 17 aromatic compounds from aqueous solution and coupled with liquid chromatography. The effects of various experimental parameters including type of micellar IL extraction solvent, stir rate, extraction time, volume of the microdroplet, and addition of organic solvent were investigated and optimized. Two different micellar solutions were formed by dissolving 1-decyl-3-methylimidazolium bromide ([DMIM][Br]) and sodium dodecyl sulfate (SDS) in 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]). It was observed that the enrichment factors of the 17 studied compounds were all enhanced with the micellar ionic liquid extraction solvent compared to the neat [BMIM][Cl] IL. The highest sensitivity was obtained with the [BMIM][Cl]–[DMIM][Br] micellar solution for polycyclic aromatic hydrocarbons (PAHs) with high molecular weight and fused rings while the [BMIM][Cl]–SDS micellar solution was proven to be more sensitive for smaller, more polar molecules. The detection limits were lower when utilizing the [BMIM][Cl]–SDS and [BMIM][Cl]–[DMIM][Br] extraction solvents compared to the neat [BMIM][Cl] extraction solvent. The reproducibility of the extraction method at 20 °C using extraction solvents composed of [BMIM][Cl]–SDS and [BMIM][Cl]–[DMIM][Br] ranged from 6.7 to 14.0 and 4.2 to 14.7%, respectively.     

咪唑类离子液体辅助水热法合成棒状微/纳米ZnO晶体

以醋酸锌和氢氧化钠为原料, 以水和含不同长度烷基链的咪唑类氯盐离子液体的混合物作为反应介质, 采用水热法合成出不同形貌的微/纳米ZnO晶体, 用扫描电子显微镜(SEM)和X射线衍射仪(XRD)对合成的ZnO晶体进行表征. 研究了烷基链长度、 离子液体用量、 反应时间以及反应温度对形成棒状ZnO晶体形貌的影响. 实验结果表明, 所制备的棒状ZnO晶体样品均为六方晶系结构. 在棒状ZnO晶体的制备过程中, 控制反应温度, 选择不同的离子液体及其用量十分重要.     

The physicochemical properties of some imidazolium-based ionic liquids and their binary mixtures

The density, viscosity and conductivity of ionic liquids (ILs), 1-octyl-3-methylimidazolium tetrafluoroborate ([omim][BF4]), 1-octyl-3-methylimidazolium chloride ([omim][Cl]), 1-hexyl-3-methylimidazolium tetrafluoroborate ([hmim] BF4]), 1-hexyl- 3-methylimidazolium chloride ([hmim][Cl]), 1-hexyl-3-methylimidazolium hexafluorophosphate ([hmim][PF6]), and the [omim][BF4] + [omim][Cl], [hmim][BF4] + [hmim][Cl], and [hmim][PF6] + [hmim][Cl] binary mixtures were studied at dif- ferent temperatures. It was demonstrated that the densities of both the neat ILs and their mixtures varied linearly with temper- ature. The density sensitivity of a binary mixture is between those of the two components. The excess molar volumes (VE) of [hmim][BF4] + [hmim][Cl] and [hmim][PF6] + [hmim][Cl] mixtures are positive in the whole composition range. For [omim][BF4] + [omim][Cl], the VE is also positive in the [omim][Cl]-rich region, but is negative in the [omim][BF4]-rich re- gion. The viscosity or conductivity of a mixture is in the intermediate of those of the two neat ILs. For all the neat ILs and the binary mixtures studied, the order of conductivity is opposite to that of the viscosity. The Vogel-Tammann-Fulcher (VTF) equations can be used to fit the viscosity and conductivity of all the neat ILs and the binary mixtures. The neat ILs and their mixtures obey the Fractional Walden Rule very well, and the values of the Walden slopes are all smaller than unit, indicating obvious ion associations in the neat ILs and the binary mixtures.     

Thermodynamic studies of ionic interactions in aqueous solutions of imidazolium-based ionic liquids [Emim][Br] and [Bmim][Cl

Experimental measurements of density at different temperatures ranging from 293.15 to 313.15 K, the speed of sound and osmotic coefficients at 298.15 K for aqueous solution of 1-ethyl-3-methylimidazolium bromide ([Emim][Br]), and osmotic coefficients at 298.15 K for aqueous solutions of 1-butyl-3-methylimidazolium chloride ([Bmim][Cl]) in the dilute concentration region are taken. The data are used to obtain compressibilities, expansivity, apparent and limiting molar properties, internal pressure, activity, and activity coefficients for [Emim][Br] in aqueous solutions. Experimental activity coefficient data are compared with that obtained from Debye-Hückel and Pitzer models. The activity data are further used to obtain the hydration number and the osmotic second virial coefficients of ionic liquids. Partial molar entropies of [Bmim][Cl] are also obtained using the free-energy and enthalpy data. The distance of the closest approach of ions is estimated using the activity data for ILs in aqueous solutions and is compared with that of X-ray data analysis in the solid phase. The measured data show that the concentration dependence for aqueous solutions of [Emim][Br] can be accounted for in terms of the hydrophobic hydration of ions and that this IL exhibits Coulombic interactions as well as hydrophobic hydration for both the cations and anions. The small hydration numbers for the studied ILs indicate that the low charge density of cations and their hydrophobic nature is responsible for the formation of the water-structure-enforced ion pairs.     

羟基功能化离子液体与溶菌酶相互作用的研究

采用荧光光谱和紫外吸收光谱研究了羟基功能化离子液体1-(1,2-二羟基丙基)-3-甲基咪唑氯盐([2,3-dhpmim]Cl)、1-(1,2-二羟基丙基)-3-甲基咪唑四氟硼酸盐([2,3-dhpmim]BF4)、1-(1,2-二羟基丙基)-3-甲基咪唑六氟磷酸盐([2,3-dhpmim]PF6)与溶菌酶的相互作用。研究发现此3种离子液体对溶菌酶的荧光猝灭均为静态猝灭;同步荧光显示离子液体与溶菌酶肽链上的色氨酸残基作用,色氨酸残基微环境发生改变;结合常数和结合位点数按照[2,3-dhpmim]Cl、[2,3-dhpmim]BF4、[2,3-dhpmim]PF6顺序依次增大,并随温度的升高而增大。     

Mechanism of cellulose dissolution in the ionic liquid 1-n-butyl-3-methylimidazolium chloride: a 13C and 35/37Cl NMR relaxation study on model systems

13C and 35/37Cl NMR relaxation measurements on several model systems demonstrate that the solvation of cellulose by the ionic liquid (IL) 1-n-butyl-3-methylimidazolium chloride ([C4mim]Cl) involves hydrogen-bonding between the carbohydrate hydroxyl protons and the IL chloride ions in a 1 ratio 1 stoichiometry.     

Theoretical study on cation-anion interaction and vibrational spectra of 1-allyl-3-methylimidazolium-based ionic liquids

In order to deepen the understanding of the cation-anion interaction in ionic liquids, the structures of cation, anions, and cation-anion ion-pairs of 1-allyl-3-methylimidazolium-based ionic liquids are optimized using density functional theory (DFT), and their most stable geometries are discussed. The structural parameters, hydrogen bonds and interaction energies of 1-allyl-3-methylimidazolium dicyanamide ([Amim]DCA), 1-allyl-3-methylimidazolium chloride ([Amim]Cl), 1-allyl-3-methylimidazolium formate ([Amim]FmO) and 1-allyl-3-methylimidazolium acetate ([Amim]AcO) ion pairs are studied. The vibrational frequencies of [Amim]DCA and [Amim]Cl have been calculated and scaled values have been compared with experimental FT-IR and FT-Raman spectra. The complete assignments were performed on the basis of the potential energy distribution (PED) of the vibrational modes.     

A novel efficient medium for chromogenic catalysis of tetramethylbenzidine with horseradish peroxidase

The traditional surfactant sodium dodecyl sulfate (SDS) and ionic liquid 1-ethyl-3-methylimidazolium tetrafluoroborate ([Emim][BF₄]) have been combined to create a novel efficient medium for chromogenic catalysis of 3,3',5,5'-tetramethylbenzidine with horseradish peroxidase in presence of H₂O₂. The results have shown the [Emim][BF₄] in the mediums can promote the rate of formation of the blue chromogen, the SDS is responsible for the stabilization of the blue chromogen due to the electrostatic attraction between positively charged blue chromogen and the negatively charged surfactant. The SDS/[Emim][BF₄] combination not only enhance catalytic activity of HRP remarkably but also stabilize the blue chromogen formed in the HRP oxidation of the substrate TMB compared to the conventional medium. Based on the superior combination of SDS and [Emim][BF₄], the colorimetric assay for detecting HRP activity and H₂O₂ concentration was established. This work demonstrates a novel efficient medium for chromogenic catalysis with potential applications in biosensors and clinical diagnosis.     

Ionic liquids as modulators of the critical micelle concentration of sodium dodecyl sulfate

Critical micelle concentration (CMC) of sodium dodecyl sulfate (SDS), an anionic surfactant, has been investigated in aqueous solutions of a variety of room temperature ionic liquids (RTILs): 1,3-dimethylimidazolium iodide (Me2IM-I, 2), 1-butyl-3-methylimidazolium chloride (BMIM-Cl, 3), 1-hexyl-3-methylimidazolium chloride (HxMIM-Cl, 4), 1-methyl-3-octylimidazolium chloride (MOIM-Cl), 5, and 1-methyl-3-octylimidazolium tetrafluoroborate (MOIM-BF4, 6). The CMC of SDS is shown to correlate with the nature of the alkyl groups in the RTILs; SDS showed appreciably higher CMCs in presence of ionic liquids 2 and 3, whereas in the presence of ionic liquids 4, 5, and 6 much smaller CMCs were observed. The nature of the gigenions, Cl- or BF4-, has no noticeable effect on the observed CMC values.     

Fluorescence Spectroscopic Analysis of the Interaction of Papain with Ionic Liquids

The interaction between papain and two typical ionic liquids (ILs), 1-octyl-3-methylimidazolium chloride ([C₈mim]Cl) and 1-butyl-3-methylimidazolium chloride ([C₄mim]Cl), was investigated by using fluorescence spectroscopy technique at a pH value of 7.4. The results suggested that ILs could quench the intrinsic fluorescence of papain probably via a static quenching mechanism. The binding constants were determined by employing the fluorescence quenching method. They were very small compared with that of volatile organic solvents, indicating that only very weak interaction between ILs and papain existed. The Gibbs free energy change (?G), enthalpy change (?H), and entropy change (?S) during the interaction of papain and ILs were estimated. Negative values of these parameters indicated that the interaction between ILs and papain was a spontaneous process, also implying that hydrogen bonding and van der Waals forces played important roles in the interaction processes.

Separation of ternary systems of hydrophilic ionic liquid with miscible organic compounds by RPLC with refractive index detection

A rapid and simple analytical method was developed for the simultaneous and quantitative determination and separation of hydrophilic imidazolium ionic liquids (ILs) (1-butyl-3-methylimidazolium chloride, [C(4)mim]Cl; 1-hexyl-3-methylimidazolium chloride, [C(6)mim]Cl; 1-octyl-3-methylimidazolium chloride, [C(8)mim]Cl; 1-allyl-3-methylimidazolium chloride, [Amim]Cl; or 1-allyl-3-methylimidazolium bromide, [Amim]Br) with miscible ethyl acetate and EtOH and their mixtures using reverse phase liquid chromatography coupled with refractive index detection (RPLC-RI). The influence of 60 to 100% (volume percentage) methanol in the mobile phase on the IL systems ([C(4)mim]Cl, [C(6)mim]Cl, [C(8)mim]Cl, [Amim]Br, or [Amim]Cl)-ethyl acetate-EtOH was investigated. The optimum mobile phase for the system [C(8)mim]Cl-ethyl acetate-EtOH, [C(4)mim]Cl-ethyl acetate-EtOH, [Amim]Br-ethyl acetate-EtOH and [Amim]Cl-ethyl acetate-EtOH was methanol/water (60:40, v/v), and methanol/water (70:30, v/v) for [C(6)mim]Cl-ethyl acetate-EtOH. Under optimum mobile phase conditions for each system, the RSD of the retention time ranged from 0.02 to 0.04%, and the RSDs of the peak area percent ranged from 0.23 to 1.85%, which showed good reproducibility of the RPLC-RI method. The RPLC-RI method can determine IL, ethyl acetate, and EtOH simultaneously in 5 min, and the analytes, especially IL, can be eluted completely. The results show that the RPLC-RI method can be used to separate and determine ILs in mixtures with organic compounds simultaneously and quantitatively.     

Glycolysis of poly(ethylene terephthalate) (PET) using basic ionic liquids as catalysts

The glycolysis of poly(ethylene terephthalate) (PET) was studied using several ionic liquids and basic ionic liquids as catalysts. The basic ionic liquid, 1-butyl-3-methylimidazolium hydroxyl ([Bmim]OH), exhibits higher catalytic activity for the glycolysis of PET, compared with 1-butyl-3-methylimidazolium bicarbonate ([Bmim]HCO₃), 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) and 1-butyl-3-methylimidazolium bromide ([Bmim]Br). FT-IR, ¹H NMR and DSC were used to confirm the main product of glycolysis was bis(2-hydroxyethyl) terephthalate (BHET) monomer. The influences of experimental parameters, such as the amount of catalyst, glycolysis time, reaction temperature, and dosages of ethylene glycol on the conversion of PET, yield of BHET were investigated. The results showed a strong influence of the mixture evolution of temperature and reaction time on depolymerization of PET. Under the optimum conditions of m(PET):m(EG): 1:10, dosage of [Bmim]OH at 0.1 g (5 wt%), reaction temperature 190 °C and time 2 h, the conversion of PET and the yield of BHET were 100% and 71.2% respectively. Balance between the polymerization of BHET and depolymerization of PET could be changed when the reaction time was more than 2 h and contents of catalyst and EG were changed.     

纤维素在离子液体[AMMor]Cl/[AMIm]Cl混合溶剂中的均相乙酰化反应研究

利用混配离子液体N-烯丙基-N-甲基吗啉氯盐(N-allyl-N-methylmorpholinium chloride,[AMMor]Cl)和1-烯丙基-3-甲基咪唑氯盐(1-allyl-3-methylimidazolium chloride,[AMIm]Cl)作为溶剂,乙酰氯为乙酰化试剂,研究了在没有催化剂条件下的纤维素的均相乙酰化反应.生成的醋酸纤维素(CA)的取代度由2.58到3.00.用FT-IR,1HNMR和13CNMR进行表征.结果表明,[AMMor]Cl/[AMIm]Cl混配的离子液体是一种良好的均相乙酰化介质,纤维素C-6,C-3和C-2三个位置上的羟基均发生了乙酰化反应,且得到纯的纤维素醋酸酯.此反应方便可控,简单高效,不仅降低了成本,离子液体比较容易回收,可以再次利用.     

Ionic liquid-induced unprecedented size enhancement of aggregates within aqueous sodium dodecylbenzene sulfonate

Physicochemical properties of aqueous micellar solutions may change in the presence of ionic liquids (ILs). Micelles help to increase the aqueous solubility of ILs. The average size of the micellar aggregates within aqueous sodium dodecylbenzene sulfonate (SDBS) is observed by dynamic light scattering (DLS) and transmission electron microscopy (TEM) to increase in a sudden and drastic fashion as the IL 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF(6)]) is added. Similar addition of [bmim][PF(6)] to aqueous sodium dodecyl sulfate (SDS) results in only a slow gradual increase in average aggregate size. While addition of the IL [bmim][BF(4)] also gives rise to sudden aggregate size enhancement within aqueous SDBS, the IL 1-ethyl-3-methylimidazolium tetrafluoroborate ([emim][BF(4)]), and inorganic salts NaPF(6) and NaBF(4), only gradually increase the assembly size upon their addition. Bulk dynamic viscosity, microviscosity, dipolarity (indicated by the fluorescent reporter pyrene), zeta potential, and electrical conductance measurements were taken to gain insight into this unusual size enhancement. It is proposed that bmim(+) cations of the IL undergo Coulombic attractive interactions with anionic headgroups at the micellar surface at all [bmim][PF(6)] concentrations in aqueous SDS; in aqueous SDBS, beyond a critical IL concentration, bmim(+) becomes involved in cation-π interaction with the phenyl moiety of SDBS within micellar aggregates with the butyl group aligned along the alkyl chain of the surfactant. This relocation of bmim(+) results in an unprecedented size increase in micellar aggregates. Aromaticity of the IL cation alongside the presence of sufficiently aliphatic (butyl or longer) alkyl chains on the IL appear to be essential for this dramatic critical expansion in self-assembly dimensions within aqueous SDBS.     

Bemerkungen über Thermochromie von Kobalt(II) chloridlösungen in organischen Medien, 1. Mitt.: Lösungen in verschiedenen Alkoholen

The thermochromism of solutions of cobalt(II) chloride in methanol, ethanol, n- and iso-propyl, n-, iso- and sec. butyl alcohol was studied spectrophotometrically. The blue color of these solutions fades with decreasing temperature, solutions in primary alcohols being especially variable, becoming pink at sufficiently low temperature. Solutions in secondary alcohols are, on the other hand, much less variable. The thermochromism can be ascribed, in general, to the shift of the equilibrium $$[CoL_2 Cl_2 ] + (3 - 4) L\begin{array}{*{20}c} \to \\ \leftarrow \\ \end{array} ([CoL_5 Cl]^ + or [CoL_6 ]^{2 + } ) + (1 - 2) Cl^ - $$ (L: solvent molecule). In the case of methanol, however, the two equilibria $$[CoLCl_3 ]^ - + 4 L \begin{array}{*{20}c} \to \\ \leftarrow \\ \end{array} [CoL_5 Cl]^ + + 2 Cl^ - $$ and $$[CoL_5 Cl]^ + + L\begin{array}{*{20}c} \to \\ \leftarrow \\ \end{array} [CoL_6 ]^{2 + } ) + Cl^ - $$ seem to be shifted one after another. The significance of the difference between primary and secondary alcohols is briefly discussed in connection with some related effects, i.e. the pressure effect studied byKitamura andOsugi ⁷ and the water effect found byKato et al.¹⁰.     

Isobaric vapor–liquid equilibria for ethanol–water system containing different ionic liquids at atmospheric pressure

Isobaric vapor–liquid equilibrium (VLE) data for ethanol–water systems containing ionic liquids (ILs) 1-methyl-3-methylimidazolium dimethylphosphate ([MMIM][DMP]), 1-ethyl-3-methylimidazolium diethylphosphate ([EMIM][DEP]), 1-butyl-3-methylimidazolium bromide ([BMIM][Br]), 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]) and 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF₆]) at atmospheric pressure (101.32 kPa) were measured with a circulation still. The results showed that the VLE of ethanol–water systems in the presence of different ILs was obviously different from that of the IL-free system. All ILs studied showed a salting-out effect, which gave rise to a change of the relative volatility of ethanol, and even to an elimination of the azeotropic point. It was found that the salting-out effect followed the order of [BMIM][Cl] > [BMIM][Br] > [BMIM][PF₆] and [MMIM][DMP] > [EMIM][DEP], which was ascribed to the preferential solvation ability of the ions resulting from the dissociation of the IL.     

293.15K时咪唑醋酸盐-乙醇二元体系的体积性质及分子间相互作用简

用比重瓶法测定了293.15 K时1-甲基咪唑醋酸盐([Mim]Ac)/1,3-二甲基咪唑醋酸盐([Mmim]Ac)/1-乙基-3-甲基咪唑醋酸盐([Emim]Ac)-乙醇(EtOH)二元体系在全组成范围内的密度. 计算出[Mim]Ac/[Mmim]Ac/[Emim]Ac和EtOH的表观摩尔体积和体系的超额摩尔体积. 用三参数多项式关联拟合了表观摩尔体积与摩尔分数的关系,外推出组分的极限偏摩尔体积和摩尔体积. [Mim]Ac/[Mmim]Ac/[Emim]Ac和EtOH的摩尔体积的外推值与实验值分别在±0.07和±0.04 cm3/mol范围内相一致. 计算出了[Mim]Ac/[Mmim]Ac/[Emim]Ac和EtOH分别在无限稀溶液中的溶剂化系数. 用Redlich-Kister 方程关联拟合了超额摩尔体积与摩尔分数的关系. 分别根据极限偏摩尔体积、摩尔体积与极限偏摩尔体积的差值、溶剂化系数和超额摩尔体积对照讨论了分子间相互作用的强弱. 结果显示,在[Mim]Ac/[Mmim]Ac/[Emim]Ac的浓度无限稀溶液中,[Mim]Ac/[Mmim]Ac/[Emim]Ac-EtOH分子对间相互作用的强弱顺序为[Mim]Ac-EtOH>[Mmim]Ac-EtOH >[Emim]Ac-EtOH;在EtOH的浓度无限稀溶液中,以及体系中[Mim]Ac/[Mmim]Ac/[Emim]Ac的摩尔分数在0.15～0.95间时,[Mim]Ac/[Mmim]Ac/[Emim]Ac-EtOH分子对间相互作用的强弱顺序都为[Emim]Ac-EtOH>[Mmim]Ac-EtOH>[Mim]Ac-EtOH.     

A theoretical investigation of the interactions between water molecules and ionic liquids

Quantum chemical calculations have been used to investigate the interaction between water molecules and ionic liquids based on the imidazolium cation with the anions [Cl(-)], [Br(-)], [BF(4)(-)], and [PF(6)(-)]. The predicted geometries and interaction energies implied that the water molecules interact with the Cl(-), Br(-), and BF(4)(-0 anions to form X(-)...W (X = Cl or Br, W = H(2)O), 2X-...2W, BF(4)(-)...W, and W...BF(4)(-)...W complexes. The hydrophobic PF(6)(-) anion could not form a stable complex with the water molecules at the density functional theory (DFT) level. Further studies indicate that the cation could also form a strong interaction with the water molecules. The 1-ethyl-3-methylimidazolium cation (Emim(+)) has been used as a model cation to investigate the interaction between a water molecule and a cation. In addition, the interaction between the ion pairs and the water was studied by using 1-ethyl-3-methylimidazolium chloride (Emim x Cl) as a model ionic liquid. The strengths of the interactions in these categories follow the trend anion-W > cation-W > ion pair-W.     

Electrodeposition of nanocrystalline aluminium from a chloroaluminate ionic liquid

In this letter we show that nanocrystalline aluminium can be electrodeposited in the Lewis acidic ionic liquid based on AlCl₃ (60 mol%) and 1-(2-methoxyethyl)-3-methylimidazolium chloride ([MoeMIm]Cl) (40 mol%). The study comprised cyclic voltammetry, potentiostatic polarization, and SEM and XRD measurements. The methoxy group in the side chain of the imidazolium cation significantly influences the electrodeposition pathway of Al in comparison to [EMIm]Cl/AlCl₃. Cyclic voltammetry shows a significant current loop attributed to nucleation. Shiny Al layers are obtained with an average crystallite size of about 40 nm.     

Ionic Liquid-Induced Structural and Activity Changes in Hen Egg White Lysozyme

Lysozyme crystals in the presence of 1-butyl-3-methylimidazolium tetrafluoroborate ([C₄mim]BF₄), 1-butyl-3-methylimidazolium chloride ([C₄mim]Cl), 1-butyl-3-methylimidazolium bromide([C₄mim]Br), and 1,3-dimethylimidazolium iodine([dmim]I) were prepared, and the influence of ionic liquids (ILs) on the structure and activity change of lysozyme was investigated. Fourier transform infrared spectroscopy revealed the major secondary structures of α-helix and β-sheet for lysozyme. It was interesting to note that increases of the band near 2,935 and 1,656 cm^?1 from Raman spectroscopy are attributed to the unfolding of lysozyme molecules. A shift in amide III from 1,230 to 1,270 cm^?1 in adding [dmim]I occurs, indicating a transformation from β-sheet to random coil. With regard to adding [C₄mim]BF₄, [C₄mim]Cl, and [C₄mim]Br, α-helix and β-sheet are the predominant structures for lysozyme. The activity study showed that the ILs used brought a positive effect. Especially, [dmim]I leads to a drastic increase in relative activity, and its value reaches 50 %.