2‐, 3‐ and 4‐[18F]Fluoropyridine by no‐carrier‐added nucleophilic aromatic substitution with K[18F]F‐K222 – a comparative study

Compared to homoaromatic and aliphatic nucleophilic radiofluorinations, only few references can be found in the literature describing nucleophilic substitutions with [¹⁸F]fluoride ion of heteroaromatic compounds such as pyridines and only reactions involving fluorination processes at the ortho‐position (2‐position) have been more intensively studied. In the present paper, the scope of the nucleophilic aromatic fluorinations at the meta‐ and para‐position of the pyridine ring with no‐carrier‐added [¹⁸F]fluoride ion as its activated K[¹⁸F]F‐K₂₂₂ complex has been evaluated and compared to the nucleophilic aromatic fluorinations at the ortho‐position in this pyridine series. The syntheses of 3‐ and 4‐[¹⁸F]fluoropyridines were chosen as model reactions and compared to the radiosynthesis of 2‐[¹⁸F]fluoropyridine. The parameters studied include the influence of the position of the leaving group at the pyridine ring, as well as the quantity of the precursor used, the type of activation (conventional heating, microwave irradiation), the solvent, the temperature and the reaction time. Using the corresponding nitro precursor, high yields were obtained at the 2‐position (94% yield) using microwaves (100 W) for 2 min in DMSO. Good yields (up to 72%) were observed at the 4‐position using the same conditions while practically no reaction was observed at the 3‐position. About 60% yield was also obtained at both the 2‐ and 4‐position using the corresponding nitro precursor at 145°C for 10 min in DMSO. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis of [18F]‐labeled 2′‐deoxy‐2′‐fluoro‐5‐methyl‐1‐β‐D‐arabinofuranosyluracil ([18F]‐FMAU)

Synthesis of 2′‐deoxy‐2′‐[¹⁸F]fluoro‐5‐methyl‐1‐β‐D‐arabinofuranosyluracil ([¹⁸F]‐FMAU) is reported. 2‐Deoxy‐2‐[¹⁸F]fluoro‐1,3,5‐tri‐O‐benzoyl‐α‐D‐arabinofuranose 2 was prepared by the reaction of the respective triflate 1 with tetrabutylammonium[¹⁸F]fluoride. The fluorosugar 2 was converted to its 1‐bromo‐derivative 3 and coupled with protected thymine 4 . The crude product mixture ( 5a and 5b ) was hydrolyzed in base and purified by HPLC to obtain the radiolabeled FMAU 6a . The radiochemical yield of 6a was 20–30% decay corrected (d.c.) in four steps with an average of 25% in four runs. Radiochemical purity was >99% and average specific activity was 2300 mCi/μmol at the end of synthesis (EOS). The synthesis time was 3.5–4.0 h from the end of bombardment (EOB). Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis of N‐(piperidin‐1‐yl)‐5‐(4‐methoxyphenyl)‐1‐(2‐chlorophenyl)‐4‐[18F]fluoro‐1H‐pyrazole‐3‐carboxamide by nucleophilic [18F] fluorination: a PET radiotracer for studying CB1 cannabinoid receptors

The feasibility of nucleophilic displacement of bromide in the 4‐bromopyrazole ring with [¹⁸F]fluoride has been demonstrated by the synthesis of two radiolabeled compounds: N‐(piperidin‐1‐yl)‐5‐(4‐methoxyphenyl)‐1‐(2‐chlorophenyl)‐4‐[¹⁸F]fluoro‐1H‐pyrazole‐3‐carboxamide, ([¹⁸F] NIDA‐42033) 1b and 1‐(2‐chlorophenyl)‐4‐[¹⁸F]fluoro‐5‐(4‐methoxyphenyl)‐1H‐pyrazole‐3‐carboxylic acid, ethyl ester 4 . The radiochemical yields were in the range of 1–6%. [¹⁸F]NIDA‐42033, a potential radiotracer for the study of CB₁ cannabinoid receptors in the animal brain by positron emission tomography, has been synthesized in sufficient quantities with specific radioactivity greater than 2500 mCi/μmol and radiochemical purity >95%. Copyright © 2002 John Wiley & Sons, Ltd.     

Ortho‐[18F]Fluoronitrobenzenes by no‐carrier‐added nucleophilic aromatic substitution with K[18F]F–K222—A comparative study

The scope of the nucleophilic aromatic ortho‐fluorinations from the corresponding ortho‐halonitrobenzene precursors (halo‐to‐fluoro substitutions) with no‐carrier‐added [¹⁸F]fluoride ion as its activated K[¹⁸F]F–K₂₂₂ complex has been evaluated via the radiosynthesis of ortho‐[¹⁸F]fluoronitrobenzene, chosen as a model reaction. The parameters studied include the influence of the leaving group in the ortho position of the phenyl ring (–Cl, –Br, –l), the quantity of precursor used, the type of activation (conventional heating or microwave irradiations), the solvent, the temperature and the reaction time. The iodo‐precursor was completely unreactive and the bromo‐precursor gave only low incorporation (<10%) in the optimal conditions used (conventional heating at 145°C or microwave activation, 100 W for 120 s). Only the chloro‐precursor was found reactive in the conditions described above and up to 70% yield was observed for the formation of ortho‐[¹⁸F]fluoronitrobenzene ([¹⁸F]‐ 1 ). In all the experiments, the unwanted ortho‐[¹⁸F]fluoro‐halobenzenes, potentially resulting from the nitro‐to‐fluoro substitution, could not be detected. These results will be applied for the radiosynthesis of 5‐[¹⁸F]fluoro‐6‐nitroquipazine, a potent radioligand for the imaging of the serotonin transporter with PET. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis of 6‐chloro‐3‐((2‐(S)‐azetidinyl)methoxy)‐5‐(2‐[18F]fluoropyridin‐4‐yl)pyridine ([18F]NIDA 522131), a novel potential radioligand for studying extrathalamic nicotinic acetylcholine receptors by PET

6‐Chloro‐3‐((2‐(S)‐azetidinyl)methoxy)‐5‐(2‐[¹⁸F]fluoropyridin‐4‐yl)pyridine ([¹⁸F]NIDA 522131), a potential radioligand for studying extrathalamic nicotinic acetylcholine receptors by positron‐emission tomography, was synthesized via no‐carrier‐added nucleophilic [¹⁸F]fluorination of 6‐chloro‐3‐((1‐(tert‐butoxycarbonyl)‐2‐(S)‐azetidinyl)methoxy)‐5‐(2‐iodopyridin‐4‐yl)vinyl)pyridine, followed by acidic deprotection. The overall radiochemical yield of the radiosynthesis was 4–8% (non‐decay‐corrected), the specific radioactivity was in the range of 167–335 GBq/µmol (4500–9000 mCi/µmol) and the radiochemical purity was greater than 99%. Preparation of [¹⁸F]NIDA522131 via corresponding bromo‐derivative 2 is also described. Copyright © 2004 John Wiley & Sons, Ltd.     

Synthesis of 3′‐deoxy‐3′‐[18F]fluoro‐1‐β‐D‐xylofuranosyluracil ([18F]‐FMXU) for PET

The synthesis of a pyrimidine analog, 3′‐deoxy‐3′‐[¹⁸F]‐fluoro‐1‐β‐D ‐xylofuranosyluracil ([¹⁸F]‐FMXU) is reported. 5‐Methyluridine 1 was converted to its di‐methoxytrityl derivatives 2 and 3 as a mixture. After separation the 2′,5′‐di‐methoxytrityluridine 2 was converted to its 3′‐triflate 4 followed by derivatization to the respective N³‐t‐Boc product 5 . The triflate 5 was reacted with tetrabutylammonium[¹⁸F]fluoride to produce 6 , which by acid hydrolysis yielded compound 7 . The crude preparation was purified by HPLC to obtain the desired product [¹⁸F]‐FMXU. The radiochemical yields were 25–40% decay corrected (d. c.) with an average of 33% in four runs. Radiochemical purity was >99% and specific activity was >74 GBq/µmol at the end of synthesis (EOS). The synthesis time was 67–75 min from the end of bombardment (EOB). Copyright © 2005 John Wiley & Sons, Ltd.     

Efficient synthesis of 6‐chloro‐3‐((2‐(S)‐azetidinyl)methoxy)‐5‐((E)‐2‐(2‐[18F]fluoropyridin‐4‐yl)vinyl)pyridine ([18F]NIDA 52289), a very high affinity radioligand for nicotinic acetylcholine receptors

6‐Chloro‐3‐((2‐(S)‐azetidinyl)methoxy)‐5‐((E)‐2‐(2‐[¹⁸F]fluoropyridin‐4‐yl)vinyl)pyridine ([¹⁸F]NIDA 52289), a very high affinity radioligand for studying nicotinic acetylcholine receptors (nAChRs) by positron‐emission tomography, was synthesized through Kryptofix 222 assisted no‐carrier‐added nucleophilic [¹⁸F]fluorination of 6‐chloro‐3‐((1‐(tert‐butoxycarbonyl)‐2‐(S)‐azetidinyl)methoxy)‐5‐((E)‐2‐(2‐bromopyridin‐4‐yl)vinyl)pyridine, followed by acidic deprotection. The overall radiochemical yield of the radiosynthesis was 10% (non‐decay‐corrected), the specific radioactivity was in the range of 93–326 GBq/µmol (2.5–8.8 mCi/µmol) and the radiochemical purity was greater than 99%. Copyright © 2004 John Wiley & Sons, Ltd.     

The first enzymatic method for C–18F bond formation: the synthesis of 5′‐[18F]‐fluoro‐5′‐deoxyadenosine for imaging with PET

The use of the key enzyme involved in carbon–fluorine bond formation in Streptomyces cattleya catalysing the formation of 5′‐fluoro‐5′‐deoxyadenosine (5′‐FDA) from fluoride ion and S‐adenosyl‐l‐methionine (SAM) was explored for its potential application in fluorine‐18 labelling of the adenosine derivative. Enzymatic radiolabelling of [¹⁸F]‐5′‐FDA was successfully carried out starting from SAM and [¹⁸F]HF when the concentration of the enzyme preparation was increased from sub‐mg/ml values to mg/ml values. The purity of the enzyme had no measurable effect on the radiochemical yield of the reaction and the radiochemical purity of [¹⁸F]‐5′‐FDA. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis of an 18F‐labeled cyclin‐dependent kinase‐2 inhibitor

The radiosynthesis of N‐(5‐(((5‐(tert‐butyl)oxazol‐2‐yl)methyl)thio)thiazol‐2‐yl)‐4‐[¹⁸F]fluoro‐benzamide [¹⁸F]2 as a potential radiotracer for molecular imaging of cyclin‐dependent kinase‐2 (CDK‐2) expression in vivo by positron emission tomography is described. Two different synthesis routes were envisaged. The first approach followed direct radiofluorination of respective nitro‐ and trimethylammonium substituted benzamides as labeling precursors with no‐carrier‐added (n.c.a.) [¹⁸F]fluoride. A second synthesis route was based on the acylation reaction of 2‐aminothiazole derivative with labeling agent [¹⁸F]SFB. Direct radiofluorination afforded ¹⁸ F‐labeled CDK‐2 inhibitor in very low yields of 1%–3%, whereas acylation reaction with [¹⁸F]SFB gave ¹⁸ F‐labeled CDK‐2 inhibitor [¹⁸ F]2 in high yields of up to 85% based upon [¹⁸ F]SFB during the optimization experiments. Large scale preparation afforded radiotracer [¹⁸ F]2 in isolated radiochemical yields of 37%–44% (n = 3, decay‐corrected) after HPLC purification within 75 min based upon [¹⁸ F]SFB. This corresponds to a decay‐corrected radiochemical yield of 13%–16% based upon [¹⁸F]fluoride. The radiochemical purity exceeded 95% and the specific activity was determined to be 20 GBq/µmol. Copyright © 2011 John Wiley & Sons, Ltd.     

Substitution‐reduction: an alternative process for the [18F]N‐(2‐fluoroethylation) of anilines

Substitution of a halo atom (chloro or bromo) in easily prepared N‐haloacetyl‐anilines with no‐carrier added (NCA) cyclotron‐produced [¹⁸F]fluoride ion (¹⁸F, t_1/2= 109.8 min; β⁺=96.9%), followed by reduction with borane–tetrahydrofuran (BH₃–THF), provides an alternative route to NCA [¹⁸F]N‐(2‐fluoroethyl)‐anilines. This two‐step and one‐pot process is rapid (～50 min) and moderately high yielding (～40% decay‐corrected radiochemical yield (RCY) overall). In the nucleophilic substitution reaction, 18‐crown‐6 is preferred to Kryptofix^® 222 as complexing agent for the solubilization of the counter‐ion (K⁺), derived from an added metal salt, in acetonitrile. Weakly basic potassium bicarbonate is preferred as the added metal salt. Inclusion of a small amount of water, equating to 4–5 molar equivalents relative to 18‐crown‐6, base or precursor (held in equimolar ratio), is beneficial in preventing the adsorption of radioactivity onto the wall of the glass reaction vessel and for achieving high RCY in the nucleophilic substitution reaction. BH₃–THF is effective for the rapid reduction of the generated [¹⁸F]N‐fluoroacetyl‐aniline to the [¹⁸F]N‐(2‐fluoroethyl)‐aniline. Copyright © 2004 John Wiley & Sons, Ltd.     

Radiosynthesis of 3‐(2′‐[18F]fluoro)‐flumazenil ([18F]FFMZ)

Recently, two fluorine‐18 labelled derivatives of flumazenil were described: 5‐(2′‐[¹⁸F]fluoroethyl)‐5‐desmethylflumazenil (ethyl 8‐fluoro‐5‐[¹⁸F]fluoroethyl‐6‐oxo‐5,6‐dihydro‐4H‐benzo‐[f]imidazo[1,5‐a] [1,4]diazepine‐3‐carboxylate; [¹⁸F]FEFMZ) and 3‐(2′‐[¹⁸F]fluoro)‐flumazenil (2′‐[¹⁸F]fluoroethyl 8‐fluoro‐5‐methyl‐6‐oxo‐5,6‐dihydro‐4H‐benzo‐[f]imidazo[1,5‐a]‐[1,4]diazepine‐3‐carbo‐ xylate; [¹⁸F]FFMZ). Since the biodistribution data of the latter were superior to those of the former we developed a synthetic approach for [¹⁸F]FFMZ starting from a commercially available precursor, thereby obviating the need to prepare a precursor by ourselves. The following two‐step procedure was developed: First, [¹⁸F]fluoride was reacted with 2‐bromoethyl triflate using the kryptofix/acetonitrile method to yield 2‐bromo‐[¹⁸F]fluoroethane ([¹⁸F]BFE). In the second step, distilled [¹⁸F]BFE was reacted with the tetrabutylammonium salt of 3‐desethylflumazenil (8‐fluoro‐5‐methyl‐6‐oxo‐5,6‐dihydro‐4H‐benzo‐[f]imidazo[1,5‐a] [1,4]diazepine‐3‐carboxylic acid) to yield [¹⁸F]FFMZ. The synthesis of [¹⁸F]FFMZ allows for the production of up to 7 GBq of this PET‐tracer, enough to serve several patients. [¹⁸F]FFMZ synthesis was completed in less than 80 min and the radiochemical purity exceeded 98%. Copyright © 2003 John Wiley & Sons, Ltd.     

A general synthesis of 2′‐deoxy‐2′‐[18F]fluoro‐1‐β‐D‐arabinofuranosyluracil and its 5‐substituted nucleosides

Several 2′‐deoxy‐2′‐[¹⁸F]fluoro‐1‐β‐D‐arabinofuranosyluracil derivatives have been synthesized. Coupling of 1‐bromo‐2‐deoxy‐2‐[¹⁸F]fluoro‐3,5‐di‐O‐benzoyl‐α‐D‐arabinofuranose 2 with protected uracil derivatives 3a–e followed by hydrolysis and high‐performance liquid chromatography purification produced the radiolabeled nucleosides 4a–e in 15–30% yield (d. c.), >99% radiochemical purity and 55.5–103.6 GBq/µmol specific activities. Copyright © 2003 John Wiley & Sons, Ltd.     

Novel synthesis of [18F]‐fluorobenzene and pyridinecarbohydrazide‐folates as potential PET radiopharmaceuticals

In an attempt to visualize folate receptors that over‐express on many cancers, [¹⁸F]‐fluorobenzene and pyridine carbohydrazide‐folates were synthesized using two different synthetic approaches starting from nucleophilic displacement reactions on ethyl‐trimethylammonium‐benzoate and pyridine carboxylate precursors. The intermediates ethyl [¹⁸F]‐fluorinated benzene and pyridine esters were reacted with hydrazine to produce the [¹⁸F]‐fluorobenzene and pyridine carbohydrazides followed by coupling with NHS‐folate 11 in the first approach. Whereas hydrazide‐folate 5 was reacted with 2,5‐dioxoazolidinyl [¹⁸F]‐fluorobenzenecarboxylate in the second approach. Based on starting [¹⁸F]‐fluoride, radiochemical yields and synthesis times were found to be around 80% (45 min) and 35% (80 min) for the first and the second approaches, respectively. The first synthetic approach holds considerable promise as a rapid and simple method for the radiofluorination of folic acid with high radiochemical yield and short time. Copyright © 2005 John Wiley & Sons, Ltd.     

The synthesis of a new probe for PET imaging reporter gene HSV1‐tk: 2‐amino‐6‐[18F] fluoro‐9‐ (4‐hydroxy‐3‐hydroxymethylbutyl) purine (6‐[18F]fluoropenciclovir)

The one step radiosynthesis of 2‐amino‐6‐ [¹⁸F]fluoro‐9‐(4‐hydroxy‐3‐hydroxymethylbutyl) purine (6‐[¹⁸F]fluoropenciclovir) 6 is reported. Radiolabeled product 6‐[¹⁸F]fluoropenciclovir 6 was prepared by radiofluorination of compound 4 with [¹⁸F]KF and isolated by a silica Sep‐Pak cartridge. The radiochemical yield of compound 6 was 45–55% decay corrected (d.c.) in six runs with radiochemical purity >98% and the radiosynthesis time was 35–42 min from end of bombardment (EOB). Copyright © 2006 John Wiley & Sons, Ltd.     

Radiosynthesis and preliminary biodistribution in mice of 6‐deoxy‐6‐[131I]iodo‐L‐ascorbic acid

An ascorbate analog labeled with iodine‐131, 6‐deoxy‐ 6‐[¹³¹I]iodo‐L ‐ascorbic acid was prepared for evaluation as an in vivo tracer of L ‐ascorbic acid. The no‐carrier‐added radiosynthesis was conducted by nucleophilic bromine–iodine exchange between the brominated precursor and sodium [¹³¹I]iodide in 2‐pentanone at 130–140°C. HPLC purification using a reverse‐phase column gave 6‐deoxy‐6‐[¹³¹I]iodo‐L ‐ascorbic acid in radiochemical yield of 36–60% with high radiochemical purity and satisfactory‐specific radioactivity in a total preparation time of 90 min. Biodistribution studies in fibrosarcoma‐bearing mice showed a high uptake in the adrenal glands, accompanied by low activity of tumor accumulation, accumulation properties similar to previous results obtained with ¹⁴C‐labeled ascorbic acid and 6‐deoxy‐6‐[¹⁸F]fluoro‐L ‐ascorbic acid, in spite of high level of deiodination. Copyright © 2009 John Wiley & Sons, Ltd.     

Radiolabeling of a high potency cannabinoid subtype‐1 receptor ligand,N‐(4‐fluoro‐benzyl)‐4‐(3‐(piperidin‐1‐yl)‐indole‐1‐sulfonyl)benzamide (PipISB), with carbon‐11 or fluorine‐18

PipISB [N‐(4‐fluoro‐benzyl)‐4‐(3‐(piperidin‐1‐yl)‐indole‐1‐sulfonyl)benzamide, 9] was identified as a selective high potency CB₁ receptor ligand. Here we describe the labeling of 9 with positron‐emitters to provide candidate radioligands for imaging brain CB₁ receptors with positron emission tomography (PET). The radiolabeling of 9 was achieved by two methods, method A with carbon‐11 and method B with fluorine‐18. In method A, [¹¹C]9 was prepared in one step from [¹¹C]carbon monoxide, itself prepared from cyclotron‐produced [¹¹C]carbon dioxide. In method B, [¹⁸F]9 was prepared from cyclotron‐produced [¹⁸F]fluoride ion in a two‐stage, four‐step synthesis with [¹⁸F]4‐fluoro‐benzyl bromide as a labeling agent. The radiosynthesis time for method A was 44 min; decay‐corrected radiochemical yields (RCYs) from [¹¹C]carbon monoxide ranged from 3.1 to 11.6% and specific radioactivities ranged from 21 to 67 GBq/µmol. The radiosynthesis time for method B was 115 min; RCYs from [¹⁸F]fluoride ion ranged from 1.5 to 5.6% and specific radioactivities ranged from 200 to 348 GBq/µmol. With these methods, [¹¹C]9 and [¹⁸F]9 may be prepared in adequate activity and quality for future evaluation as PET radioligands. Copyright © 2008 John Wiley & Sons, Ltd.     

One‐step radiosynthesis of [18F]LBT‐999: a selective radioligand for the visualization of the dopamine transporter with PET

LBT‐999 (8‐((E)‐4‐fluoro‐but‐2‐enyl)‐3‐beta‐p‐tolyl‐8‐aza‐bicyclo[3.2.1]octane‐2‐beta‐carboxylicacid methyl ester) is a recently developed cocaine derivative belonging to a new generation of highly selective dopamine transporter (DAT) ligands (K_D : 9 nM for the DAT and IC₅₀ > 1000 nM for the serotonin and norepinephrine transporter). Initial fluorine‐18‐labelling of LBT‐999 was based on the robust and reliable two‐step radiochemical pathway often reported for such tropane derivatives, involving first the preparation of (E)‐1‐[¹⁸F]fluoro‐4‐tosyloxybut‐2‐ene followed by a N‐alkylation reaction with the appropriate nor‐tropane moiety. In the present work, a simple one‐step fluorine‐18‐labelling of LBT‐999 is reported, based on a chlorine‐for‐fluorine nucleophilic aliphatic substitution, facilitating as expected both automation and final high‐performance liquid chromatography (HPLC) purification. The process involves: (A) reaction of K[¹⁸F]F–Kryptofix^®222 with the chlorinated precursor (3.5–4.5 mg) at 165°C for 10 min in DMSO (0.6 mL) followed by (B) C‐18 PrepSep cartridge pre‐purification and finally (C) semi‐preparative HPLC purification on a Waters Symmetry^® C‐18. Typically, 3.70–5.92 GBq of [¹⁸F]LBT‐999 (> 95% chemically and radiochemically pure) could be obtained with specific radioactivities ranging from 37 to 111 GBq/µmol within 85–90 min (HPLC purification and Sep‐Pak‐based formulation included), starting from a 37.0 GBq [¹⁸F]fluoride batch (overall radiochemical yields: 10–16%, non‐decay‐corrected). Copyright © 2007 John Wiley & Sons, Ltd.     

Automated synthesis and purification of [18F]fluoro‐[di‐deutero]methyl tosylate

Automated synthetic procedures of [¹⁸F]fluoro‐[di‐deutero]methyl tosylate on a GE TRACERlab FX F‐N module and a non‐commercial synthesis module have been developed. The syntheses included azeotropic drying of the [¹⁸F]fluoride, nucleophilic ¹⁸F‐fluorination of bis(tosyloxy)‐[di‐deutero]methane, HPLC purification and subsequent formulation of the synthesized [¹⁸F]fluoro‐[di‐deutero]methyl tosylate (d₂‐[¹⁸F]FMT) in organic solvents. Automation shortened the total synthesis time to 50 min, resulting in an average radiochemical yield of about 50% and high radiochemical purity (>98%). The possible application of this procedure to commercially available synthesis modules might be of significance for the production of deuterated ¹⁸F‐fluoromethylated imaging probes in the future. Copyright © 2013 John Wiley & Sons, Ltd.     

Radiosynthesis of 2‐exo‐(2′‐[18F]Fluoro‐3′‐(4‐fluorophenyl)‐pyridin‐5′‐yl)‐7‐azabicyclo[2.2.1]heptane ([18F]F2PhEP), a potent epibatidine‐based radioligand for nicotinic acetylcholine receptor PET imaging

2‐exo‐(2′‐Fluoro‐3′‐(4‐fluorophenyl)‐pyridin‐5′‐yl)‐7‐azabicyclo[2.2.1]heptane (F₂PhEP), a novel, epibatidine‐based, α4β2‐selective nicotinic acetylcholine receptor antagonist of low toxicity, as well as the corresponding N‐Boc‐protected chloro‐ and bromo derivatives as precursors for labelling with fluorine‐18 were synthesized from 7‐tert‐butoxycarbonyl‐7‐azabicyclo[2.2.1]hept‐2‐ene in 13, 19 and 8% overall yield, respectively. [¹⁸F]F₂PhEP was prepared in 8–9% overall yield (non‐decay‐corrected) using 1 mg of the bromo derivative in the following two‐step radiochemical process: (1) no‐carrier‐added nucleophilic heteroaromatic ortho‐radiofluorination with the activated K[¹⁸F]F‐Kryptofix^®₂₂₂ complex in DMSO using microwave activation at 250 W for 90 s, followed by (2) quantitative TFA‐induced removal of the N‐Boc protective group. Radiochemically pure (>95%) [¹⁸F]F₂PhEP (1.48–1.66 GBq, 74–148 GBq/µmol) was obtained after semi‐preparative HPLC (Symmetry^® C18, eluent aqueous 0.05 M NaH₂PO₄ CH₃CN: 78/22 (v:v)) in 75–80 min starting from an 18.5 GBq aliquot of a cyclotron‐produced [¹⁸F]fluoride production batch. Copyright © 2006 John Wiley & Sons, Ltd.     

A general method for the fluorine‐18 labelling of fluoroquinolone antibiotics

Fluoroquinolones are an important class of antibiotic agents with a broad spectrum of antibacterial activity. Labelling of fluoroquinolones with fluorine‐18 is of interest for the performance of pharmacokinetic measurements and the visualization of bacterial infections in humans with positron emission tomography. A two‐step radiosynthetic pathway to prepare fluorine‐18‐labelled ciprofloxacin (1‐cyclopropyl‐6‐[¹⁸F]fluoro‐1,4‐dihydro‐4‐oxo‐7‐(1‐piperazinyl)‐quinoline‐3‐carboxylic acid) has previously been developed. In the present work this approach was applied to the preparation of the structurally related compounds [¹⁸F]norfloxacin (1‐ethyl‐6‐[¹⁸F]fluoro‐1,4‐dihydro‐4‐oxo‐7‐(1‐piperazinyl)‐quinoline‐3‐carboxylic acid) and [¹⁸F]pefloxacin (1‐ethyl‐6‐[¹⁸F]fluoro‐1,4‐dihydro‐7‐(4‐methyl‐1‐piperazinyl)‐4‐oxo‐quinoline‐3‐carboxylic acid). The first step of the radiosynthesis consisted of a ¹⁸F for ¹⁹F exchange reaction on a 7‐chloro‐substituted precursor molecule, followed by coupling reactions with the amines piperazine or 1‐methylpiperazine. Starting from 51–58 GBq of [¹⁸F]fluoride 1.9–2.0 GBq of [¹⁸F]norfloxacin or [¹⁸F]pefloxacin, ready for intravenous injection, could be obtained in a synthesis time of 130 min (3.5–3.8% overall radiochemical yield). Moreover, the preparation of [¹⁸F]levofloxacin ((‐)‐(S)‐9‐[¹⁸F]fluoro‐2,3‐dihydro‐3‐methyl‐10‐(4‐methyl‐1‐piperazinyl)‐7‐oxo‐7H‐pyrido[1,2,3‐de]‐1,4‐benzoxazine‐6‐carboxylicacid) was attempted but failed to afford the desired product in practical amounts. Copyright © 2003 John Wiley & Sons, Ltd.