Late Neoproterozoic to Holocene thermal history of the Precambrian Georgetown Inlier,northeast Australia

Carboniferous‐Permian volcanic complexes and isolated patches of Upper Jurassic — Lower Cretaceous sedimentary units provide a means to qualitatively assess the exhumation history of the Georgetown Inlier since ca 350 Ma. However, it is difficult to quantify its exhumation and tectonic history for earlier times. Thermochronological methods provide a means for assessing this problem. Biotite and alkali feldspar ⁴⁰Ar/³⁹Ar and apatite fission track data from the inlier record a protracted and non‐linear cooling history since ca 750 Ma. ⁴⁰Ar/³⁹Ar ages vary from 380 to 735 Ma, apatite fission track ages vary between 132 and 258 Ma and mean track lengths vary between 10.89 and 13.11 μm. These results record up to four periods of localised accelerated cooling within the temperature range of ～320–60°C and up to ～14 km of crustal exhumation in parts of the inlier since the Neoproterozoic, depending on how the geotherm varied with time. Accelerated cooling and exhumation rates (0.19–0.05 km/10⁶ years) are observed to have occurred during the Devonian, late Carboniferous‐Permian and mid‐Cretaceous — Holocene periods. A more poorly defined Neoproterozoic cooling event was possibly a response to the separation of Laurentia and Gondwana. The inlier may also have been reactivated in response to Delamerian‐age orogenesis. The Late Palaeozoic events were associated with tectonic accretion of terranes east of the Proterozoic basement. Post mid‐Cretaceous exhumation may be a far‐field response to extensional tectonism at the southern and eastern margins of the Australian plate. The spatial variation in data from the present‐day erosion surface suggests small‐scale fault‐bounded blocks experienced variable cooling histories. This is attributed to vertical displacement of up to ～2 km on faults, including sections of the Delaney Fault, during Late Palaeozoic and mid‐Cretaceous times.     

Duluth Complex apatites: Age reference material for LA–ICP–MS‐based fission‐track dating

Anorthositic series apatites of the Duluth Complex, Minnesota, USA, have high spontaneous fission‐track densities of up to ~10⁷ cm^–2 and a homogeneous age of ~900 Ma, allowing high‐precision fission‐track dating based on LA–ICP–MS U analysis. Absolute fission‐track dating, track‐length measurement and chemical composition analysis were performed to evaluate a cooling history, which is essential for age reference materials. Preliminary inverse modelling for a sample with a shortened track‐length distribution yielded a monotonic cooling history from ~100°C at 925 Ma. The apatites incur an over‐etching problem when employing the commonly used etching protocol involving 5.5 M HNO₃.     

Late Cretaceous and Cenozoic tectonics of the Malay Peninsula constrained by thermochronology

New thermochronological analyses of granites from the Malay Peninsula record the region’s thermal history during the Late Mesozoic and Cenozoic. ⁴⁰Ar/³⁹Ar and (U–Th–Sm)/He analyses are combined with existing fission track data to provide a comprehensive set of temperature and time data. Fully and partially reset K-feldspar and biotite mica ⁴⁰Ar/³⁹Ar analyses indicate a significant period of thermal perturbation between ∼100 and ∼90 Ma, and a second lesser perturbation between ∼51 and ∼43 Ma. Zircon (U–Th–Sm)/He analyses and existing fission track data indicate exhumation of the Malay Peninsula in the Cretaceous, and renewed, localised exhumation in the early Paleogene. Apatite (U–Th–Sm)/He and fission track data indicate rapid exhumation of the region in the Late Eocene and Oligocene. Late Cretaceous tectonism is linked to the reversal of a regional dynamic topographic low following the cessation of subduction along the Sundaland margin in the Late Cretaceous, causing regional uplift and exhumation and the addition of significant heat into the crust via mantle upwelling. Early Paleogene exhumation may reflect the continuation of Cretaceous tectonism or a discrete phase of Paleocene exhumation linked to localised transpressional tectonics. Eocene tectonism is coincident with major subsidence offshore of the Malay Peninsula, interpreted to reflect regional block faulting in response to north–south compression driven by the resumption of subduction along the southern margin of Sundaland in the Eocene.     

Late Cretaceous-Cenozoic Exhumation History of the Lüliang Mountains, North China Craton: Constraint from Fission-track Thermochronology

The Lüliang Mountains, located in the North China Craton, is a relatively stable block, but it has experienced uplift and denudation since the late Mesozoic. We hence aim to explore its time and rate of the exhumation by the fission-track method. The results show that, no matter what type rocks are, the pooled ages of zircon and apatite fission-track range from 60.0 to 93.7 Ma and 28.6 to 43.3 Ma, respectively; all of the apatite fission-track length distributions are unimodal and yield a mean length of ~13?μm; and the thermal history modeling results based on apatite fission-track data indicate that the time-temperature paths exhibit similar patterns and the cooling has been accelerated for each sample since the Pliocene (c.5 Ma). Therefore, we can conclude that a successive cooling, probably involving two slow (during c.75-35 Ma and 35-5 Ma) and one rapid (during c.5 Ma-0 Ma) cooling, has occurred through the exhumation of the Lüliang Mountains since the late Cretaceous. The maximum exhumation is more than 5 km under a steady-state geothermal gradient of 35°C/km. Combined with the tectonic setting, this exhumation may be the resultant effect from the surrounding plate interactions, and it has been accelerated since c.5 Ma predominantly due to the India-Eurasia collision.     

Jurassic‐to‐present thermal history of the central High Atlas (Morocco) assessed by low‐temperature thermochronology

Apatite fission track (AFT) and (U–Th)/He data from the High Atlas have been obtained for the first time to constrain the tectono‐thermal evolution of the central part of the chain. Results from Palaeozoic basement massifs indicate long residence at low temperatures, consistently with their original location out of the deepest Mesozoic rift troughs and indicating minor exhumation. The best rocks for extracting the Alpine history of the Atlas Mountains are Jurassic intrusives, which yield AFT ages centred on c. 80 Ma; thermal models based on AFT data and constrained by (U–Th)/He suggest that these ages are included in a slow cooling trend from intrusion age to c. 50 Ma ago that we attribute to post‐rift thermal relaxation. This is followed by a stability period of c. 30 Ma and then by a final exhumational cooling until present exposure. Eocene intrusives yield AFT ages similar to those of Rb–Sr and K–Ar suggesting rapid emplacement in the uppermost crust.     

Low Temperature History of the Tiegelongnan Porphyry–Epithermal Cu (Au) Deposit in the Duolong Ore District of Northwest Tibet,China

The Tiegelongnan is the first discovered porphyry–epithermal Cu (Au) deposit of the Duolong ore district in Tibet, China. In order to constrain the thermal history of this economically valuable deposit and the rocks that host it, eight samples were collected to perform a low‐temperature thermochronology analysis including apatite fission track, apatite, and zircon (U‐Th)/He. Apatite fission track ages of all samples are between 34 ± 3 and 67 ± 5 Ma. Mean apatite (U‐Th)/He ages show wide distribution, ranging from 29.3 ± 2.5 to 56.4 ± 9.1 Ma. Mean zircon (U‐Th)/He ages range from 79.5 ± 12.0 to 97.9 ± 4.4 Ma. The exhumation rate of the Tiegelongnan deposit was 0.086 km m.y.^?1 between 98 and 47 Ma and decreased to 0.039 km m.y.^?1 since 47 Ma. The mineralized intrusion was emplaced at a depth of about 1400 m in the Tiegelongnan deposit. Six cooling stages were determined through HeFTy software according to low‐temperature thermochronology and geochronology data: (i) fast cooling stage between 120 and 117 Ma, (ii) fast cooling stage between 117 and 100 Ma, (iii) slow cooling stage between100 and 80 Ma, (iv) fast cooling stage between 80 and 45 Ma, (v) slow cooling stage between 45 and 30 Ma, and (vi) slow cooling stage (<30 Ma). Cooling stages between 120 and 100 Ma are mainly caused by magmatic–hydrothermal evolution, whereas cooling stages after 100 Ma are mainly caused by low‐temperature thermal–tectonic evolution. The Bangong–Nujiang Ocean subduction led to the formation of the Tiegelongnan ore deposit, which was buried by the Meiriqiecuo Formation andesite lava and thrust nappe structure; then, the Tiegelongnan deposit experienced uplift and exhumation caused by the India–Asia collision.     

Cooling history and tectonic exhumation stages of the south-central Tibetan Plateau (China): Constrained by 40Ar/39Ar and apatite fission track thermochronology

Between the Qiangtang Block and Yalung-Zangpo Suture Zone in the south-central Tibetan Plateau, the following geological units and suture zones have been identified from south to north: the Gangdese Granitic Belt, the Lhasa Block, the Nyainqentanghla Shear Zone, the Dangxiong–Sangxiong Tectono-granitic Belt and the Bangong–Nujiang Suture Zone. To better constrain the tectonic evolution and cooling histories of these units, ⁴⁰Ar/³⁹Ar muscovite, biotite and K-feldspar, as well as apatite fission track dating and thermochronological analysis have been carried out. The analytical results indicate that the south-central Tibetan Plateau, with the exception of the Nyainqentanghla Shear Zone, provides a record of three cooling stages at 165–150, 130–110 and ∼45–35 Ma. Fission-track data modelling also indicates that the stages of cooling were different in the different tectonic belts or blocks. Very different cooling phases occurred in the south-central Tibetan Plateau, compared with southern Tibet, as well as along the Yalung–Zangpo Suture Zone. There is no thermochronological evidence to indicate that the south-central part of Tibetan Plateau was influenced by the underthrusting of Indian Plate.The three-stage cooling history and the stages of tectonic exhumation were controlled completely by the closure of the Bangong–Nujiang Suture Zone along its eastern segment during Middle–Late Jurassic (165–150 Ma) and its western segment in the Early–Late Cretaceous (130–110 Ma), as well as by the collision between the Indian and Asian plates in the Paleogene (45–35 Ma).     

Late Mesozoic‐Cenozoic exhumation history of the Lesser Hinggan Mountains,NE China,revealed by fission track thermochronology

This study uses zircon and apatite fission‐track (FT) analyses to reveal the exhumation history of the granitoid samples collected from the Lesser Hinggan Mountains, northeast China. A southeast to northwest transect across the Lesser Hinggan Mountains yielded zircon FT ages between 89.8 ± 5.7 and 100.4 ± 8.6 Ma, and apatite FT ages between 50.6 ± 13.8 and 74.3 ± 4.5 Ma with mean track lengths between 11.7 ± 2.0 and 12.8 ± 1.7 µm. FT results and modelling identify three stages in sample cooling history spanning the late Mesozoic and Cenozoic eras. Stage one records rapid cooling from the closure temperature of zircon FT to the high temperature part of the apatite FT partial annealing zone (∼210–110 °C) during ca. 95 to 65 Ma. Stage two records a period of relative slow cooling (∼110–60 °C) taking place between ca. 65 and 20 Ma, suggesting that the granitoids had been exhumed to the depth of ∼1−2 km. Final stage cooling (60–20 °C) occurred since the Miocene at an accelerated rate bringing the sampled rocks to the Earth's surface. The maximum exhumation is more than 5 km under a steady‐state geothermal gradient of 35 °C/km. Integrated with the tectonic setting, this exhumation is possibly led by the Pacific Plate subduction combined with intracontinental orogeny associated with asthenospheric upwelling. Copyright © 2010 John Wiley & Sons, Ltd.     

40Ar/39Ar geochronology and P-T-t paths from the Cordillera Darwin metamorphic complex, Tierra del Fuego, Chile

Abstract ⁴⁰Ar/³⁹Ar data collected from hornblende, muscovite, biotite and K-feldspar constrain the P-T-t history of the Cordillera Darwin metamorphic complex, Tierra del Fuego, Chile. These data show two periods of rapid cooling, the first between c. 500 and c. 325° C at rates ≥25° C Ma^-1, and the second between c. 250 and c. 200°C. For high-T cooling, ⁴⁰Ar/³⁹Ar ages are spatially disparate and depend on metamorphic grade: rocks that record deeper and hotter peak metamorphic conditions have younger ⁴⁰Ar/³⁹Ar ages. Sillimanite- and kyanite-grade rocks in the south-central part of the complex cooled latest: ⁴⁰Ar/³⁹Ar Hbl = 73–77 Ma, Ms = 67–70 Ma, Bt = 68 Ma, and oldest Kfs = 65 Ma. Thermobarometry and P-T path studies of these rocks indicate that maximum burial of 26–30 km at 575–625° C may have been followed by as much as 10 km of exhumation with heating of 25–50° C. Staurolite-grade rocks have intermediate ⁴⁰Ar/³⁹Ar ages: Hbl = 84–86 Ma, Ms = 71 Ma, Bt = 72–75 Ma, and oldest Kfs = 80 Ma. Thermobarometry on these rocks indicates maximum burial of 19–26 km at temperatures of 550–580° C. Garnet-grade rocks have the oldest ages: Ms = 72 Ma and oldest Kfs = 91 Ma; peak P-T conditions were 525–550° C and 5–7 kbar. Regional metamorphic temperatures for greenschist facies rocks south of the Beagle Channel did not exceed c. 300–325° C from 110 Ma to the present, although the rocks are only 2 km from kyanite-bearing rocks to the north. One-dimensional thermal models allow limits to be placed on exhumation rates. Assuming a stable geothermal gradient of 20–25° C km^-1, the maximum exhumation rate for the St-grade rocks is c. 2.5 mm yr^-1, whereas the minimum exhumation rate for the Ky + Sil-grade rocks is c. 1.0 mm yr^-1. Uniform exhumation rates cannot explain the disparity in cooling histories for rocks at different grades, and so early differential exhumation is inferred to have occurred. Petrological and geochronological comparisons with other metamorphic complexes suggest that single exhumation events typically remove less than c. 20 km of overburden. This behaviour can be explained in terms of a continental deformation model in which brittle extensional faults in the upper crust are rooted to shallowly dipping ductile shear zones or regions of homogeneous thinning at mid- to deep-crustal levels. The P-T-t data from Cordillera Darwin (1) are best explained by a ‘wedge extrusion’model, in which extensional exhumation in the southern rear of the complex was coeval with thrusting in the north along the margin of the complex and into the Magallanes sedimentary basin, (2) suggest that differential exhumation occurred initially, with St-grade rocks exhuming faster than Ky + Sil-grade rocks, and (3) show variations in cooling rate through time that correlate both with local deformation events and with changes in plate motions and interactions.     

The Meso-Cenozoic thermo-tectonic evolution of the Eastern Pyrenees: an <Superscript>40</Superscript>Ar/<Superscript>39</Superscript>Ar fission track and (U–Th)/He thermochronological study of the Canigou and Mont-Louis massifs

Vertical displacements on the SW–NE Têt fault (Eastern Pyrenees Axial Zone, France), which separates the Variscan Canigou-Carança and Mont-Louis massifs, were constrained using a thermochronologic multi-method approach. ⁴⁰Ar/³⁹Ar data from the granitic Mont-Louis massif record its Variscan cooling history and reveal no ages younger than Early Cretaceous, while the Canigou-Carança gneiss massif records systematically younger ⁴⁰Ar/³⁹Ar ages. These younger ⁴⁰Ar/³⁹Ar ages in the Canigou-Carança gneiss massif are the result of partial to total rejuvenation of argon isotopic systems related to a thermal flow coeval with the Cretaceous HT-BP metamorphism in the North Pyrenean Zone. Only the deepest rocks from the Canigou-Carança suffered this extensive Mid-Cretaceous thermal overprint probably due to differential burial around 4 km at that time. The post Mid-Cretaceous vertical displacements along the Têt fault are recorded by “low” temperature thermochronology using K-feldspar ⁴⁰Ar/³⁹Ar, zircon and apatite fission track and (U–Th)/He datings. The Mont-Louis granite samples experienced a long period of protracted cooling reflecting a lack of thermo-tectonic activity in this area from Late Palaeozoic to Early Cenozoic, followed by cooling from 55–60 Ma to Late Eocene at a mean rate of 15–20°C/Ma in the final stage. This cooling stage corresponds to Têt fault reactivation with a reversed component, promoting exhumation of the Mont-Louis roof zone contemporaneously with the south-vergent Pyrenean thrusting. In the Canigou-Carança massif, the main cooling event occurred from 32 to 18 Ma at a maximum rate of 30°C/Ma during Early Oligocene followed by a more moderate rate of 3°C/Ma from Late Oligocene to Early Burdigalian, coeval with the normal reactivation of the Têt fault in brittle conditions that accommodated the final exhumation of the massif during the opening of the Gulf of Lion.     

Reconstructing deep‐time histories from integrated thermochronology: An example from southern Baffin Island,Canada

We present a multi‐chronometric approach for reconstructing deep‐time thermal histories using southern Baffin Island as a case study. This continuous thermal history begins with the Palaeoproterozoic Trans‐Hudson Orogeny and is derived from inverse and forward models that integrate thermochronometers spanning some 500°C: new apatite U–Pb ages and K‐feldspar ⁴⁰Ar/³⁹Ar multi‐diffusion domain data, published (U–Th)/He zircon ages and new multi‐kinetic fission‐track results. Integration of data from a wider temperature range reduces ambiguities in thermal‐history modelling and permits us to constrain the timing of geological processes including, extended post‐orogenic cooling, enhanced later Proterozoic cooling, and then episodic burial and exhumation in the Palaeozoic–Mesozoic.     

哈萨克斯坦阿克斗卡特大型斑岩铜矿床成矿时代与剥露历史研究

哈萨克斯坦阿克斗卡特大型斑岩型铜矿床产在中亚成矿域巴尔喀什成矿带阿克斗卡矿田。本文根据花岗岩类岩石的锆石U-Pb、40Ar/39Ar和裂变径迹(FT)热年代学研究,结合前人研究成果,给出了阿克斗卡斑岩铜矿床从深成岩浆活动、成矿作用、区域冷却到剥露作用的全过程。阿克斗卡矿床及附近花岗岩类锆石SHRIMPU-Pb定年结果,给出科尔达尔岩体早期英云闪长岩的结晶年龄为335.7±1.3Ma;主成矿期的含矿二长花岗斑岩结晶年龄为327.5±1.9Ma,反映了阿克斗卡矿床斑岩型铜成矿作用的年龄。花岗岩类角闪石、黑云母、钾长石40Ar/39Ar热年代学分别给出矿物冷却年龄为310.6Ma、271.5Ma和274.9Ma,进一步限定了深成斑岩型铜成矿作用的时代和区域冷却的历史。磷灰石FT测年数据揭示,受区域构造作用的影响,阿克斗卡铜矿田在晚白垩世(91～68.0Ma)发生地块的差异隆升和剥露作用。     

Exhumation, doming and slab retreat in the Betic Cordillera (SE Spain): in situ40Ar/39Ar ages and P–T–d–t paths for the Nevado-Filabride complex

The combination of metamorphic petrology tools and in situ laser ⁴⁰Ar/³⁹Ar dating on phengite (linking time of growth, compositions and P–T conditions) enables us to identify a detailed P–T–d–t path for the still debated tectonometamorphic evolution of the Nevado‐Filabride complex and infer new geodynamic‐scale constraints. Our data show an isothermal decompression (at 550 °C) from 20 kbar for the Bédar‐Macael unit and 14 kbar for the Calar Alto unit down to c. 3–4 kbar for both units at 2.8 mm year^?1. At 22–18 Ma, this first part of the exhumation is followed by a final exhumation at 0.6 mm year^?1 along a high‐temperature low‐pressure (HTLP) gradient of c. 60 °C km^?1. The age of the peak of pressure is not precisely known but it is shown that it is around 30 Ma and possibly older, which is at variance with recent models suggesting a younger age for high‐pressure (HP) metamorphism. Most of the exhumation is related to late‐orogenic extension from c. 30 to 22–18 Ma. Thus the formation of the main ductile extensional shear zone, the Filabres Shear Zone (FSZ), occurred at 22–18 Ma and is clearly associated with a top‐to‐the‐west shear sense once the FSZ is well localized. The transition from ductile to brittle then occurred at c. 14 Ma. The final exhumation, accommodated by brittle deformation, occurred from c. 14 to 9 Ma and was accompanied, from 12 to 8 Ma, by the formation of nearby extensional basins. The duration of the extensional process is c. 20 Myr which argues in favour of a progressive slab retreat from c. 30 to 9 Ma. The change in the shape of the P–T path at 22–18 Ma together with strain localization along the main top‐to‐the‐west shear zone suggests that this date corresponds to a change in the direction of slab retreat from southwards to westwards.     

Thermochronology of the PoSen complex,northern Vietnam: Implications for tectonic evolution in SE Asia

The PoSen complex, located closely adjacent to the southwestern margin of the Red River shear zone represents the uplifted basement of north Vietnam and may record the motion of the shear zone. However, its thermochronological history has not been fully examined yet. Here we applied U–Pb and ⁴⁰Ar/³⁹Ar dating methods to reveal its thermochronological history. U–Pb analysis of composite zircon grains by TIMS yielded an average age of 760 ± 25 Ma, clustering on the concordia line. Twelve SHRIMP U–Pb analyses also yielded a consistent result of 751 ± 7 Ma. Along with the geochemical features, the U–Pb dating results suggest the PoSen complex was a late Proterozoic magmatic complex, which could correspond to the Chengjiang orogeny, a widespread thermal event in southwest China. Results of ⁴⁰Ar/³⁹Ar dating of micas and K-feldspars were in the range of 36–30 Ma, revealing a rapid cooling and exhumation history of the PoSen complex during the late Paleogene. The time span of cooling and exhumation of the PoSen complex is slightly older than the main cooling phases of the Ailao Shan–Red River (ASRR) metamorphic massifs (28–17 Ma), but is synchronous with the early igneous activity stage in the eastern Indo-Asian collision zone of southeast China and north Vietnam. Owing to the ongoing debate about the initiation and offset of the ASRR shear zone, the tectonic force for the late Paleogene cooling of the PoSen complex is still inconclusive. The rapid exhumation of the PoSen complex could be in response to either the detachment of the Neo-Tethyan slab or a transpressional phase of continental subduction along the ASRR shear system in the eastern Indo-Asian collision zone.     

Influence of dissolution/reprecipitation reactions on metamorphic greenschist to amphibolite facies mica 40Ar/39Ar ages in the Longmen Shan (eastern Tibet)

Linking ages to metamorphic stages in rocks that have experienced low‐ to medium‐grade metamorphism can be particularly tricky due to the rarity of index minerals and the preservation of mineral or compositional relicts. The timing of metamorphism and the Mesozoic exhumation of the metasedimentary units and crystalline basement that form the internal part of the Longmen Shan (eastern Tibet, Sichuan, China), are, for these reasons, still largely unconstrained, but crucial for understanding the regional tectonic evolution of eastern Tibet. In situ core‐rim ⁴⁰Ar/³⁹Ar biotite and U–Th/Pb allanite data show that amphibolite facies conditions (~10–11 kbar, 530°C to 6–7 kbar, 580°C) were reached at 210–180 Ma and that biotite records crystallization, rather than cooling, ages. These conditions are mainly recorded in the metasedimentary cover. The ⁴⁰Ar/³⁹Ar ages obtained from matrix muscovite that partially re‐equilibrated during the post peak‐P metamorphic history comprise a mixture of ages between that of early prograde muscovite relicts and the timing of late muscovite recrystallization at c. 140–120 Ma. This event marks a previously poorly documented greenschist facies metamorphic overprint. This latest stage is also recorded in the crystalline basement, and defines the timing of the greenschist overprint (7 ± 1 kbar, 370 ± 35°C). Numerical models of Ar diffusion show that the difference between ⁴⁰Ar/³⁹Ar biotite and muscovite ages cannot be explained by a slow and protracted cooling in an open system. The model and petrological results rather suggest that biotite and muscovite experienced different Ar retention and resetting histories. The Ar record in mica of the studied low‐ to medium‐grade rocks seems to be mainly controlled by dissolution–reprecipitation processes rather than by diffusive loss, and by different microstructural positions in the sample. Together, our data show that the metasedimentary cover was thickened and cooled independently from the basement prior to c. 140 Ma (with a relatively fast cooling at 4.5 ± 0.5°C/Ma between 185 and 140 Ma). Since the Lower Cretaceous, the metasedimentary cover and the crystalline basement experienced a coherent history during which both were partially exhumed. The Mesozoic history of the Eastern border of the Tibetan plateau is therefore complex and polyphase, and the basement was actively involved at least since the Early Cretaceous, changing our perspective on the contribution of the Cenozoic geology.     

Timing and rate of isothermal decompression in Pan-African granulites from Rundvågshetta, East Antarctica

Geochronological data, combined with field and petrological evidence, constrain the timing and rate of near‐isothermal decompression at granulite facies temperatures in rocks from the Lützow‐Holm Complex of East Antarctica. Granulite facies gneisses from Rundvågshetta in Lützow‐Holm Bay experienced a peak metamorphic temperature of over 900 °C at c. 11 kbar, as evidenced by primary orthopyroxene–sillimanite‐bearing assemblages, and secondary cordierite–sapphirine‐bearing assemblages in metapelites. Peak metamorphic assemblages show strong preferred mineral orientation, interpreted to have developed synchronously with pervasive ductile deformation. Zircon from a syndeformational leucosome has a U–Pb age of 517±9 Ma, which is interpreted as a melt crystallization age. This age provides the best estimate of the time of peak metamorphic conditions. The post‐peak metamorphic history is characterized by near‐isothermal decompression, recorded by mineral textures in a variety of rock compositions. Field and textural relations indicate that decompression post‐dated pervasive ductile deformation. K/Ar and ⁴⁰Ar/³⁹Ar ages from hornblende and biotite represent closure ages during cooling subsequent to decompression, and indicate cooling to temperatures between c. 350 and 300 °C by c. 500 Ma, thus placing a lower time limit on the duration of the high‐temperature isothermal decompression episode. The combination of the zircon age from a syndeformational melt with K/Ar and ⁴⁰Ar/³⁹Ar closure ages indicates that near‐isothermal decompression from c. 11 to c. 4 kbar at granulite facies temperatures, followed by cooling to c. 300 °C, took place within a time interval of 20±10 Myr. Simple one‐dimensional models for exhumation‐controlled cooling indicate that these data require exhumation rates of the order of c. 3 km Myr^?1 for several million years, then cessation of exhumation followed by relatively isobaric cooling during thermal re‐equilibration.     

Tectonometamorphic evolution of the Sebadani eclogitic metagabbro and the Sambagawa schists, central Shikoku, Japan: 40Ar/39Ar mineral age constraints

Abstract The Sambagawa metamorphic belt exposed in central Shikoku records a high-P–T metamorphic event. It is represented by the Oboke nappe and structurally overlying, internally imbricated, Besshi nappe complex. These major structural units are in ductile thrust contact. A melange is developed along a ductile internal tectonic contact within the Besshi nappe complex. Tectonic emplacement of a high-T enclave (Sebadani eclogite) in the melange zone resulted in the development of a contact metamorphic aureole within the host Sambagawa rocks. ³⁶Ar/⁴⁰Ar versus ³⁹Ar/⁴⁰Ar isotope correlation ages recorded by hornblende from the Sambagawa basic schists which surround the Sebadani enclave are 83.4 ± 0.3 Ma (within contact aureole) and 83.6 ± 0.5 Ma (outside aureole). ⁴⁰Ar/³⁹Ar plateau ages recorded by muscovite from the same samples are 87.9 ± 0.3 and 89.3 ± 0.4 Ma. Amphibole from the amphibolite within the Sebadani enclave records isotope correlation ages of 93.7 ± 1.1 and 96.5 ± 0.7 Ma (massive interior) and 84.6 ± 1.2 Ma (marginal shear zone). Amphibole within the massive amphibolite is significantly higher in X_Mg than that within the host Sambagawa basic schists. The older ages recorded by amphibole within the Sebadani enclave are interpreted to date cooling through somewhat higher closure temperatures than which characterize the more Fe-rich amphibole in surrounding schists. The younger amphibole age recorded within the marginal shear zone probably indicates that crystallization of amphibole continued until cooling through the relatively lower amphibole closure temperatures. These results, together with the previously published ⁴⁰Ar/³⁹Ar ages of the Sambagawa schists, suggest: (i) metamorphic culmination occurred in the Besshi nappe complex at c. 100–90 Ma; (ii) at c. 95 Ma the Besshi nappe complex was internally imbricated and tectonic enclaves were emplaced; (iii) at c. 85 Ma, the composite Besshi nappe was rapidly exhumed and tectonically emplaced over the Oboke nappe (which attained peak metamorphic conditions at c. 75 Ma); (iv) the Besshi and Oboke nappe complexes were further exhumed as a coherent tectonic unit and unconformably overlain by the Eocene Kuma Group at c. 50 Ma.     

Aspects of the structural and late thermal evolution of the Redbank Thrust system,central Australia: Constraints from the Speares Metamorphics

We present new data on the field geology and late thermal evolution of the Redbank Thrust system in the Arunta Block of central Australia. Geochronological and field data from the Speares Metamorphics are also used to relate the thermal evolution of the Redbank Thrust system to the structural evolution of the region. We show that several stages in the evolution might be discerned. An originally sedimentary sequence was intruded by mafic intrusions and then deformed during partial melting to form the principal foliation observed in the region (D1). This sequence was then folded during D2 into upright folds with north‐ to northeast‐plunging fold axes. These events are likely to correlate with the Strangways and/or Argilke and Chewings Orogenies known from previous studies. Subsequently, the Redbank Thrust was initiated during D3. This event is recognised by deflection of the host rocks into the shear zone and might therefore have been associated with a component of strike‐slip motion. It occurred probably at or before 1500–1400 Ma. Subsequent north‐over‐south thrust motion in the Redbank Thrust formed the intense mylonitic fabric and folded the mylonitic fabric during D4 into asymmetric folds with shallow fold axes. New ⁴⁰Ar/³⁹Ar K‐feldspar ages from three samples collected from variably deformed branches of the Redbank Thrust and undeformed rocks in the Speares Metamorphics suggest that most parts of the Redbank Thrust system cooled relatively slowly after metamorphism and deformation in the Mesoproterozoic so that the D4 thrusting might have been very long‐lived. Minimum ages of the K‐feldspar age spectra show that the entire region cooled below 200°C by approximately 300 Ma. Apatite fission track ages from nine samples show that cooling through the apatite partial annealing zone occurred during Cretaceous time (ca 150–70 Ma) and modelled cooling histories are consistent with the cooling rates obtained from the K‐feldspar data. They indicate that final exhumation of the Redbank Thrust system occurred probably in response to erosion, possibly driven by rifting around the margins of Australia.     

^Ar／^39Ar Dating of Deformation Events and Reconstruction of Exhumation of Ultrahigh—Pressure Metamorphic Rocks in Donghai,East China

Abstract Recent investigations reveal that the ultrahigh‐pressure metamorphic (UHPM) rocks in the Donghai region of East China underwent ductile and transitional ductile‐brittle structural events during their exhumation. The earlier ductile deformation took place under the condition of amphibolite facies and the later transitional ductile‐brittle deformation under the condition of greenschist facies. The hanging walls moved southeastward during both of these two events. The ⁴⁰Ar/³⁹Ar dating of muscovites from muscovite‐plagioclase schists in the Haizhou phosphorous mine, which are structurally overlain by UHPM rocks, yields a plateau age of 218.0±2.9 Ma and isochron age of 219.8Ma, indicating that the earlier event of the ampibolite‐facies deformation probably took place about 220 Ma ago. The ⁴⁰Ar/³⁹Ar dating of oriented amphiboles parallel to the movement direction of the hanging wall on a decollement plane yields a plateau age of 213.1 ± 0.3 Ma and isochron age of 213.4±4.1 Ma, probably representing the age of the later event. The dating of pegmatitic biotites and K‐feldspars near the decollement plane from the eastern Fangshan area yield plateau ages of 203.4±0.3 Ma, 203.6±0.4 Ma and 204.8±2.2 Ma, and isochron ages of 204.0±2.0 Ma, 200.6±3.1 Ma and 204.0±5.0 Ma, respectively, implying that the rocks in the studied area had not been cooled down to closing temperature of the dated biotites and K‐feldspars until the beginning of the Jurassic (about 204 Ma). The integration of these data with previous chronological ages on the ultrahigh‐pressure metamorphism lead to a new inference on the exhumation of the UHPM rocks. The UHPM rocks in the area were exhumed at the rate of 3–4 km/Ma from the mantle (about 80–100 km below the earth's surface at about 240 Ma) to the lower crust (at the depth of about 20‐30km at 220 Ma), and at the rate of 1–2 km/Ma to the middle crust (at the depth of about 15 km at 213 Ma), and then at the rate of less than 1 km/Ma to the upper crust about 10 km deep at about 204 Ma.     

东构造结那木拉断裂带上新世以来强烈活动的年代学证据

为揭示东喜马拉雅构造结那木拉断裂带上新世以来强烈活动特征,对采集自那木拉断裂带的三件基岩样品进行黑云母40Ar/39Ar、磷灰石裂变径迹两种热年代学方法测年;并利用"Pecube"软件对测得年龄数据及断裂带两侧已发表年龄数据进行定量模拟计算。测试结果显示黑云母40Ar/39Ar年龄范围为4.44±0.71 Ma~3.45±0.24 Ma,磷灰石裂变径迹年龄范围为3.7±0.4 Ma~1.8±0.2 Ma。年龄数据及其模拟计算结果表明,约3 Ma以前那木拉断裂带南侧地壳隆升最快,隆升速率约2.5 km/Ma,断裂带以正断层运动特征为主;约3 Ma以来那木拉断裂带北侧地壳隆升最快,约为1.3 km/Ma,断裂带以逆断层运动特征为主。那木拉断裂带运动特征变化可能与约8 Ma以来东喜马拉雅构造结快速地壳隆升剥露区域由南向北逐渐迁移有关。