Pathogenesis of Alzheimer-related neuritic plaques: AT8 immunoreactive dystrophic neurites precede argyrophilic neurites in plaques of the entorhinal region, hippocampal formation, and amygdala

We examined the reliability of the anteroposterior and posterior condylar axes for determining rotational alignment of the femoral component in total knee arthroplasty (TKA). A computed tomography scan was taken at the level of the femoral epicondyle in 84 knees (27 varus knees with medial femorotibial arthritis (FT-OA) in 26 patients, 17 knees with patellofemoral arthritis in 14 patients, and 40 normal knees in 40 volunteers). On the image, an anteroposterior axis, a line perpendicular to the anteroposterior axis, an epicondylar axis and a posterior condylar axis were drawn, and the relationship between the three axes was assessed. The mean values for the 84 knees were evaluated, and the posterior condylar axis was 6.0 degrees +/- 2.4 degrees internally rotated relative to the epicondylar axis, while the line perpendicular to the anteroposterior axis was 1.4 degrees +/- 3.3 degrees internally rotated relative to the epicondylar axis. The internal rotation angle of the posterior condylar axis relative to the epicondylar axis was 6.2 degrees +/- 1.9 degrees in the knees with medial femorotibial arthritis, 6.4 degrees +/- 2.4 degrees in the knees with patellofemoral arthritis, and 5.8 degrees +/- 2.7 degrees in the normal knees, showing consistent values in normal and osteoarthritic knees. The internal rotation angle of the line perpendicular to the anteroposterior axis relative to the epicondylar axis was 0.1 degrees +/- 3.3 degrees, 1.3 degrees +/- 3. 3 degrees, and 2.3 degrees +/- 3.1 degrees in the three groups, respectively (i.e., there were significant differences between the medial FT-OA knees and the normal knees). The results demonstrated that the anteroposterior axis was rotated externally to a significant degree in medial FT-OA knees and was less reliable than the posterior condylar axis for use in alignment for TKA on medial FT-OA knees.     

Effect of medial displacement of the tibial tubercle on patellar position after rotational malposition of the femoral component in total knee arthroplasty

A large Q angle induced by technical error such as an internally rotated femoral component causes patellar failure after total knee arthroplasty. The effect of medial displacement of the tibial tubercle to decrease the Q angle for patellar tracking was studied by evaluating the patellar position relative to the patellar groove on the femoral component in cadaver specimens. A 5 degrees internally rotated femoral component caused the patella to shift medially about 5 mm, and also caused the tibia to rotate internally about 3 degrees at full extension. With a 5 degrees externally rotated femoral component, normal patellar tracking occurred. The distance of medial displacement was determined so that the patellar tendon was parallel to the longitudinal axis of the tibia at full extension. This allowed the quadriceps tendon, the patella, and the patellar tendon to form a straight line. The average distance of medial transposition of the tibial tubercle was 9.32 mm. Medialization of the tibial tubercle caused the patella to shift about 2 mm medially from the patellar groove. The transfer also caused an external rotation of the tibia (2 degrees-5 degrees). Medial transfer of the tibial tubercle changes patellar kinematics and corrects the tendency toward lateral patellar dislocation caused by internally rotating the femoral component; however, it also creates minor patellar and tibial kinematic changes that may have a clinical effect.     

Patellar tracking after total knee arthroplasty. The effect of tibial tray malrotation and articular surface configuration

The effect of total knee arthroplasty (TKA) with neutrally aligned and malrotated tibial trays was studied in five fresh anatomic specimen knees. Patellar shift, tilt, and rotation, and the rotational position of the tibia were measured in normal knees and after TKA with the Ortholoc Modular knee system. Both semiconstrained and unconstrained articular surfaces were assessed in the neutral position and at anatomic, 15 degrees internal, and 15 degrees external rotation of the tibial tray. After TKA, the patellae shifted slightly medially in the early phase of knee flexion because the anterior lateral flange of the femoral component was longer than the lateral trochlea of the femur and because the tibia rotated internally. The raised lateral flange on the femoral component tilted the patella medially at full extension after TKA. The semiconstrained tray allowed minimal tibial rotation because of its articular configuration. As much as 15 degrees malrotation of the unconstrained tibial tray did not affect patellar tracking. The semiconstrained tibial tray in the neutral position had almost the same patellar tracking as the unconstrained tray, but at 15 degrees external rotation, the semiconstrained tray internally rotated the tibia, leading to medial shift of the patella. Although 15 degrees internal rotation caused external rotation of the tibia, the patella did not shift as much laterally, despite the increase in the Q angle.     

The effect of femoral component position on the kinematics of total knee arthroplasty

In a laboratory study using seven fresh-frozen anatomic specimen knees, the effect of total knee arthroplasty on the three-dimensional kinematics of the patella, femur, and tibia were measured. Experiments were performed in the intact knee, after division of the anterior cruciate ligament (ACL), after total knee arthroplasty, and after 10 degrees internal rotation, 10 degrees external rotation, 5-mm medial shift, and 5-mm lateral shift of the femoral component on the femur. The presence of a high lateral ridge on the anterior surface of the femoral component effectively prevented patellar subluxation or dislocation, but displaced and tilted the patella medially. Internal rotation or medial displacement of the femoral component exaggerated this medial patellar displacement and shift. External rotation of the femoral component corrected it, except at flexion angles greater than 100 degrees, where the femur was shifted medially on the tibia and externally rotated 15 degrees. This combination produced a net 10-mm medial displacement of the patella relative to the tibia at 120 degrees knee flexion. Lateral placement of the femoral component compensated for the effect of the high lateral ridge and allowed more normal patellar tracking while allowing tibiofemoral motions similar to those seen after sectioning of the ACL. The kinematics of the patellofemoral and tibiofemoral joints were not reproduced with a total knee prosthesis that sacrifices the ACL. When using a prosthesis with a high lateral ridge, lateral placement of a femoral component prevented patellar dislocation and allowed patellar tracking patterns similar to those seen in the intact knee without further altering tibiofemoral motions.     

Protein synthesis blockade differentially affects the stress-induced transcriptional activation of neuropeptide genes in parvocellular neurosecretory neurons

A method of orienting the femoral and tibial bone cuts relative to the endosteal cortex of the femur and tibia was used in 32 patients who underwent revision total knee arthroplasty. The mean orientation of the femoral component was 96.74 degrees +/- 1.03 degrees, mean orientation of the tibial baseplate was 90.71 degrees +/- 1.10 degrees, mean anatomic tibiofemoral alignment was 7.42 degrees +/- 1.69 degrees of valgus, and mean mechanical tibiofemoral alignment was 1.09 degrees +/- 1.83 degrees of valgus. Mean tibial bowing was 1.63 degrees +/- 1.57 degrees of valgus, and mean femoral bowing was 0.58 degrees +/- 1.53 degrees of varus. Valgus tibial bowing was correlated with valgus orientation of the tibial component (r = .86, P < .000001), and varus femoral bowing was correlated with orientation of the femoral component (r = .54, P = .0054). Referencing the implant position from the endosteal cortex of the intramedullary canals provides a reliable method of achieving satisfactory alignment in most revision total knee arthroplasties; however, bowing of the femur or tibia can affect alignment.     

The effects of graft rotation on attachment site separation distances in anterior cruciate ligament reconstruction

We created a model to see if twisting the graft in an anterior cruciate ligament reconstruction affected the distance separating the femoral and tibial attachments of the perimeter fibers of a patellar tendon graft. Graft bone plugs were simulated by two 12.5-mm diameter Delrin cylinders. Holes, 1 mm in diameter, were placed at the four corners of a centralized rectangle measuring 5 by 10 mm. Graft ligament fibers were represented by color-coded sutures passed through the holes in the modeled bone plugs. This graft model was fixed in tunnels reamed under arthroscopic guidance at the anterior cruciate ligament attachment sites of the femur and tibia in six fresh-frozen knee specimens. Spring gauges were used to measure indirectly the changes in distance of separation during knee flexion between the femoral and tibial attachments relative to a zero defined at 90 degrees of knee flexion. The tibial cylinder was rotated at 45 degrees increments from 90 degrees external to 180 degrees internal rotation relative to the femoral cylinder and measurements were repeated after each incremental rotation. External rotation resulted in a statistically significant higher mean separation distance (4.5 mm) for peripheral graft attachments than internal rotation (2.8 mm) (P = 0.05).     

Distal realignment of the patellar tendon to correct abnormal patellar tracking

Between January 1980 and January 1994, 31 knees required distal realignment of the extensor mechanism to treat lateral patellar subluxation that could not be corrected with lateral patellar release and vastus medialis advancement during total knee arthroplasty. Fifteen had a preoperative valgus angle of more than 12 degrees, and 16 were undergoing revision total knee arthroplasty. Ten knees had a modified Roux-Goldthwait procedure, 18 had medial tibial tubercle transfer, and three had medial transfer of the medial 1/2 of the patellar tendon. The length of followup ranged from 2 to 16 years. No late patellar subluxations or dislocations have occurred in any of these cases. Three cases of medial tibial tubercle transfer had hematomas develop, with two requiring surgical evacuation; one of these developed a late infection. No fractures or displacements of the tubercle fragment have occurred. No significant patellar complications have occurred in those patients who underwent the modified Roux-Goldthwait procedure or the medial transfer of the medial 1/2 of the patellar tendon. One year after surgery, the mean knee flexion was 113 degrees, four knees had a flexion contracture of 5 degrees, and none had a quadriceps lag.     

The anterior cruciate ligament in controlling axial rotation. An evaluation of its effect

Changes in axial tibial rotation after anterior cruciate ligament sectioning were evaluated in 14 fresh human knee joints. Simulation of vertical stance in a quadriceps-stabilized knee was performed. Internal and external rotational torques were applied before and after anterior cruciate ligament sectioning. Pivot shift tests were done in the intact and anterior cruciate ligament sectioned knee. Results of pivot shift tests were all negative before sectioning and positive after isolated sectioning. No significant change in axial rotation occurred between the intact and sectioned knee for external rotation (P = 0.24) or internal rotation (P = 0.12). Presence of a load at the femoral housing in both the intact and ligament-sectioned knees caused a significant change in external rotation (P < 0.0001). No significant change was noted in internal rotation between loaded and unloaded states (P = 0.70). Total tibial rotation in the intact knee was noted to vary between 31 degrees at 0 degree of flexion and 42 degrees at 60 degrees of flexion. These results suggest that the anterior cruciate ligament does not play a significant role in limiting axial rotation and that rotational instability is not a major factor after isolated anterior cruciate ligament rupture.     

The effect of minoxidil on keratocyte proliferation in cell culture

Patellofemoral arthritis is a relatively common and frequently complex problem encountered by those who treat patients with anterior knee pain. Because the pathologic conditions that precipitate this pain are so varied, the treatment options must also be varied. Using the Insall classification system for chondral injuries, we explored the treatment options available. Special emphasis was placed on grade IV changes and the surgical treatment of this condition. We reviewed the following options: spongialization, tibial tubercle elevation, patellectomy, patellar resurfacing, patellofemoral arthroplasty, and autologous chondrocyte transplantation. Regardless of the procedure favored, proper patellar tracking must be restored. Without such attention to patellar alignment, patients cannot achieve pain-free function.     

Hybrid total knee arthroplasty

A prospective study of a hybrid total knee arthroplasty (TKA) with an uncemented femoral component and cemented tibial and patellar components was performed to combine the advantage of a press-fit femur while avoiding the problems in uncemented tibial and patellar implants. A total of 329 posterior cruciate-preserving TKA were studied at an average of 4.7 years after surgery: 84% of the knees had at most mild or occasional pain, 68% had good or excellent knee scores, and 62% could walk more than 1000 m. The function scores were 40% good or excellent in this collective, with an average age of 69.4 years at surgery. The component position and alignment were biomechanically correct. Radiolucent lines were observed regularly at the edges of the tibial and femoral components. There were no revisions for aseptic loosening. Hybrid TKA provides good results comparable to cemented TKA.     

Patellofemoral complications in symmetrical total knee arthroplasty

A review of 356 Kinemax (Howmedica, Inc, Rutherford, NJ) cemented posterior cruciate ligament-retaining condylar total knee arthroplasties employing a symmetrical femoral component articulating with a medially offset symmetrical dome patella component was carried out to examine the results and determine the incidence and nature of the patellofemoral complications. Follow-up was from 3 to 8 years, with a mean of 5.1 years. A review of patellofemoral complications in previously reported homogeneous series of symmetrical and asymmetrical implants is presented. Mean postoperative Knee Society scores improved to 91, function scores to 86, and Hospital of Special Surgery scores to 90 yielding 95% good and excellent results. Mean postoperative range of motion was -1.5 degrees extension to 113 degrees flexion. There were five patellofemoral complications (1.4%), including two symptomatic subluxations, two distal pole avulsion fractures, and one lateral facet fracture. There were two reoperations necessary for patellofemoral problems (0.56%), one to correct subluxation and one for excision of the fractured lateral facet. These rates are lower than those previously reported for asymmetrical implants as well as current and phased-out symmetrical designs of total knee arthroplasty in the intermediate term. This review suggests that cemented total knee arthroplasty with symmetrical patellofemoral resurfacing with an offset patella dome and posterior cruciate ligament retention yields low patellofemoral complications and reoperations. The symmetrical femoral component appears to be a satisfactory compromise of "normal" femoral anatomy, which decreases inventory and cost without adversely affecting patellofemoral function and complications.     

The Ranawat Award. Comparison of surgical approaches in total knee arthroplasty

A series of 123 revision total knee replacements performed at three centers and followed up for 2 to 4 years was evaluated. In cases in which exposure could be obtained with undue tension on the patellar tendon, the surgical approach was modified using either quadriceps turndown (14 cases) or tibial tubercle osteotomy (15 cases). The remaining 94 patients underwent a standard operative approach that consisted of a medial parapatellar capsular incision which in 31 cases was combined with a quadriceps snip. The results were compared using the Knee Society clinical score, a patient satisfaction survey, and a patellofemoral questionnaire. Postoperatively, the group of patients who had a quadriceps snip was equivalent to the group of patients who underwent a standard approach in every parameter measured, and the groups therefore were combined for comparison purposes. The patients who had quadriceps turndown and the tibial tubercle osteotomy had equivalent scores postoperatively both of which were significantly lower than the standard group. The group of patients who had quadriceps turndown had a significantly greater increase in arc of motion than the tibial tubercle osteotomy group. The tibial tubercle osteotomy group had a lower degree of extension lag but a higher percentage of patients who had difficulty with kneeling and stooping and a higher percentage of patients who had difficulty with kneeling and stooping and a higher percentage of patients who thought the surgery was unsuccessful in relieving pain and unsuccessful in returning them to normal daily activities.     

External rotational positioning of the leg after intertrochanteric combined varus-derotational osteotomy in Perthes' disease

A 13-year-old boy underwent an intertrochanteric combined varus derotational osteotomy (VDO) for Perthes' disease of his right hip. After surgery he walked with his right leg externally rotated. Computed tomography scans of both knees and hips were obtained with the legs in their spontaneous position to evaluate rotation and anteversion. The femoral condyles were in 28 degrees of external rotation on the operated side compared with 2 degrees on the non-operated side. The angle between the femoral neck and the horizontal plane was 32 degrees on both sides. We conclude that there may be a risk that a derotational osteotomy may produce an external rotational position of the leg instead of altering the angle between the femoral neck and the horizontal plane.     

Relationship between gait and clinical results after high tibial osteotomy

Thirty-two patients with primary osteoarthritis of the medial compartment of the knee were studied prospectively to assess the relationship between clinical results, limb alignment, and adduction moment of the knee. Clinical and radiographic examination and gait analyses were performed preoperatively and repeated at 6 months and at 1, 3, and 6 years after high tibial osteotomy. The preoperative peak adduction moment was high in 25 patients and low in seven. In both groups, the adduction moment of the knee decreased at 6 months after surgery but increased after that period. Alignment of the affected knee in both groups remained valgus after surgery (average femorotibial angle, 167 degrees-169 degrees). Clinical outcome in both groups improved after surgery and remained unchanged after 1 year. The peak adduction moment of the knee for the whole group significantly correlated with alignment and foot angle before and 6 years after surgery but did not correlate with stride length and walking velocity. In addition, only alignment was associated significantly with clinical results at 6 years. These results suggest that the preoperative peak adduction moment of the knee does not correlate with clinical or radiographic outcomes of high tibial osteotomy, provided sufficient valgus alignment is achieved at surgery.     

A quantitative pharmacological study of the cholinergic depolarization of hippocampal pyramidal cells in rat brain slices

Twenty-eight unicompartmental knee arthroplasties performed as an alternative to high tibial osteotomy or tricompartmental knee arthroplasty in patients under 60 years of age were reviewed after 2 to 6 years of follow-up. The patient's age at the time of operation averaged 52 years. Using the Knee Society Score, 90% were rated good or excellent results in terms of function and pain relief. The average flexion angle obtained was 124 degrees, and the average postoperative alignment was 4 degrees of anatomic valgus for varus deformities and 8 degrees for valgus deformities. The average activity level according to the Tegner and Lysholm score slightly improved (preoperative, 2.3; follow-up, 2.7 points). Of the 28 knees, 9 (32%) presented radiolucent lines about the tibial component and two had incomplete radiolucent lines at the bone-cement interface on the femoral side. There was no correlation between activity level and tibial radiolucent lines. Two revisions were performed because of loosening of the femoral component at the prosthesis-cement interface. One was converted to another unicompartmental arthroplasty and the other to a tricompartmental arthroplasty. One tibial component exhibited an asymptomatic slowly progressive radiolucency. Unicompartmental knee arthroplasty in middle-aged patients yields 2- to 6-year results competitive with osteotomy but inferior to tricompartmental arthroplasty in terms of revision. The specific prosthetic design used in this series appeared to be vulnerable to femoral component loosening possibly because of constrained tibial topography and smooth tapered femoral fixation lugs.     

The transepicondylar axis approximates the optimal flexion axis of the knee

The traditional understanding of knee kinematics holds that no single fixed axis of rotation exists in the knee. In contrast, a recent hypothesis suggests that knee kinematics are better described simply as two simultaneous rotations occurring about fixed axes. Knee flexion and extension occurs about an optimal flexion axis fixed in the femur, whereas tibial internal and external rotations occur about a longitudinal rotation axis fixed in the tibia. No other translations or rotations exist. This hypothesis has been tested. Tibiofemoral kinematics were measured for 15 cadaveric knees undergoing a realistic loadbearing activity (simulated squatting). An optimization technique was used to identify the locations of the optimal flexion and longitudinal rotation axes such that simultaneous rotations about them could best represent the measured kinematics. The optimal flexion axis was compared with the transepicondylar axis defined by bony landmarks. The longitudinal rotation axis was found to pass through the medial joint compartment. The optimal flexion axis passed through the centers of the posterior femoral condyles. No significant difference was found between the optimal flexion and transepicondylar axes. To an average accuracy of better than 3.4 mm in translation, and 2.9 degrees in orientation, knee kinematics were represented successfully by simple rotations about the optimal flexion and longitudinal rotation axes. The optimal flexion axis is fixed in the femur and can be considered the true flexion axis of the knee. The transepicondylar axis axis, which is identified easily by palpation, closely approximates the optimal flexion axis.     

Shift and tilt of the bony patella in total knee replacement

Resurfacing the patella or not in total knee arthroplasty is generally still a quite controversial topic. In that context we felt a necessity to get more informations about the natural history of a non resurfaced patella in the prosthetic surrounding than only in comparison with a replaced patella. By the fact that we haven't been replacing patellae apart from special cases since up to five years, we have available a patient selection on which this question can be studied. Thirty primary total knee replacements with documented 2 year's follow up have been investigated by calculation of the radiological patellar shift and tilt relative to the natural groove on preoperative X-rays and to the prosthetic groove in the postoperative evolution. These results were matched with the range of motion obtained after two years and with persisting pain. Only mobile polyethylene inlays had been used. With regard to the patella no difference was found for one single complete tibial tray or two separately implanted unicompartimental tibial trays. As a rule an adaptation of the bony patellar contour to the prosthetic groove was observed with an increased density of the bony contact area with or without a fibrous interstitial layer. Based on their clinical follow up examination seven patients had to be adjointed to a "residual problem group", as they presented persisting pain (3) or a poor range of motion of 90/0/0 degree of flexion/extension or less. Only in this group we found cases with a postoperative shift over 5 mm (2) and a postoperative tilt over 15 degrees (3). Inside this group, also with a significant difference from the group without residual problems, there was furthermore a correlation between persisting pain and an important preoperative tilt and between a diminished range of motion and a considerable preoperative shift. It has to be pointed out that even the cases without long severe malposition before the arthroplasty but with unsatisfactory realignement referring to the patellar tilt (7 degrees-15 degrees) have been found pain free at the last follow up. One patient with a severe secondary increase of disalignment (16 mm/139 degrees) due to an aseptic tibial loosening represents a particular case. After corrective revision of the tibial implants this patient also got again a complete pain relief and a good range of motion without any surgical measure to the patella and inspite of an evident residual tilt. Thus we have to conclude that it is justified to take important pains with the realignment to obtain a residual patellar shift of less than 5 mm. Apart from usual operative steps during the implantation to favour a good patellar tracking, e.g. a high quadriceps release or a medially transposed refixation of the detached tibial tubercle can get necessary. On the other hand a residual tilt up to 15 degrees is well tolerated, as the unresurfaced patella presents an astonishing ability of adaptation to the prosthetic groove by remodelling of the bony contour and structure. Nevertheless in the included cases of severe preoperative malposition, in which we didn't replace the patella because of a good intraoperative bone quality, we had to put up with an increased incidence of late problems even with normalized patellar tracking. In such cases an extended indication to a patellar resurfacing may be considered.     

Metal release and excretion from cementless titanium alloy total knee replacements

Concentrations of titanium, aluminum, and vanadium were measured in the serum and urine of patients with titanium alloy cementless primary total knee arthroplasty components. Patients were categorized in one of five groups. In Group 1, the patellar and tibial articulating surfaces were made of carbon fiber reinforced ultrahigh molecular weight polyethylene. In Group 2, the patellar and tibial surfaces were made of ultrahigh molecular weight polyethylene. In Group 3, the femoral titanium alloy articulating surface was nitrogen ion implanted with ultrahigh molecular weight polyethylene patellar and tibial articulating surfaces. Patients in Group 4 had failed patellar components, and Group 5 was comprised of age and gender matched control subjects without implants. Serum concentrations of titanium were approximately 50 times greater in patients with failed patellar components (Group 4) and approximately 10 times greater in patients with carbon fiber reinforced polyethylene bearing surfaces (Group 1) when compared with Groups 2 and 3 and the control subjects (Group 5). For aluminum and vanadium, no detectable differences were observed among any of the groups. In addition, analysis of 24-hour urine samples showed no significant differences in titanium, aluminum, or vanadium concentrations among any of the groups. Elevated serum titanium levels may serve as a marker of patellar component failure or accelerated femoral component wear in total knee replacements with titanium alloy bearings. The toxicologic ramifications of these findings are unknown.     

Renal expression of parathyroid hormone-related protein (PTHrP) and PTH/PTHrP receptor in a rat model of tubulointerstitial damage

The effect of a meniscal bearing on knee laxity in anterior cruciate ligament-sacrificing total knee arthroplasty was evaluated in 7 cadaver knees using a knee testing device that measured knee flexion angle as well as laxity to medial-lateral, anterior-posterior [AP], and rotational loads. A standard fixed tibial component and mobile tibial components (AP sliding, rotationally sliding, and AP and rotationally sliding) were used to evaluate AP, rotational, and varus-valgus stability and maximal flexion and extension with the neutrally positioned and malrotated tibial tray. The AP movable components increased AP laxity, and the fixed component decreased rotational laxity significantly when compared with the normal knees. The rotationally movable components did not change knee laxities significantly even when the tibial tray was malrotated. No significant difference among the components was detected when the maximal flexion and extension angles were compared in the neutrally positioned tibial tray. Malrotation of the tibial tray decreased the maximal extension angle in the fixed component. This study showed that the rotationally movable component can achieve near-normal laxity regardless of tibial tray rotation, but AP mobility of the bearing produces AP laxity that could lead to implant failure.     

Three-dimensional CT measurement of adult acetabular dysplasia: technique, preliminary results in normal subjects, and potential applications

OBJECTIVE: To assess a three-dimensional computed tomography (3DCT) technique for measurement of acetabular coverage in adults. DESIGN: We used 3DCT to define the geometric centre of the femoral head and to measure centre-edge angles (CEAs) at 10 degrees rotational increments around the acetabular rim. The means, ranges, standard deviations and 95% confidence intervals for the CEAs at the various rotational increments were determined. Inter- and intra-observer variability was measured. The normal values are compared with two example cases of acetabular dysplasia. PATIENTS: The normal hips of 15 subjects aged 1949 years (mean 34.2 years) were measured. RESULTS: The 3DCT measurements are reproducible (mean difference interobserver, 1.7 degrees - 7.9 degrees; mean difference intra-observer, 0.6 degrees-6.9 degrees). Mean normal CEA at the lateral rim was 33 degrees with a 95% confidence interval of 23 degrees - 43 degrees. Mean normal CEAs at 10 rotational increments from anterior to posterior rim were determined, and graphed as a 'normal curve'. CONCLUSION: This new 3DCT method of assessing acetabular dysplasia is simple, reproducible, and applicable to diagnosis, quantification and surgical planning for adult acetabular dysplasia patients.