The August 27, 2008, <Emphasis Type="Italic">M</Emphasis><Subscript>W</Subscript> = 6.3, Kultuk earthquake effects in the Nearepicenter zone: Macroseismic survey results

In this work, the macroseismic effects of the Kultuk earthquake (M _W = 6.3), which took place on August 27, 2008 in the southwestern closure of the Baikal Lake, are under consideration. The intensity of shocks in inhabited localities located in the epicentral zone reached 7–8 points on the MSK-64 scale. The earthquake was named after the local settlement of Kultuk, which was the mostly damaged area by the earthquake. The considered seismic event caused significant material damage (about 250 million rubles according to preliminary estimates). In inhabited localities of Southern Pribaikalie thousands of cases of damaged ovens and chimneys were registered. Some buildings were highly damaged and, accordingly, they are unfit for further use. The earthquake was the cause of numerous rockslides, rockfalls, and landslides on steep natural and artificial slopes. A macroseismic survey allowed us to establish the asymmetrical distribution of the intensity of shocks relative to the epicenter.     

Focal depths for moderate-sized aftershocks of the Wenchuan <Emphasis Type="Italic">M</Emphasis><Subscript>S</Subscript>8.0 earthquake and their implications

Sliding-window cross-correlation method is firstly adopted to identify sPn phase, and to constrain focal depth from regional seismograms, by measuring the time separation between sPn and Pn phases. We present the focal depths of the 17 moderate-sized aftershocks (M _S⩾5.0) of the Wenchuan M _S8.0 earthquake, using the data recorded by the regional seismic broadband networks of Shaanxi, Qinghai, Gansu, Yunnan and Sichuan. Our results show focal depths of aftershocks range from 8 to 20 km, and tend to cluster at two average depths, separate at 32.5°N, i.e., 11 km to the south and 17 km to the north, indicating that these aftershocks are origin of upper-to-middle crust. Combined with other results, we suggest that the Longmenshan fault is not a through-going crustal fault and the Pingwu-Qingchuan fault may be not the northward extension of the Longmenshan thrust fault. Supported by the National Natural Science Foundation of China (Grant Nos. 40604009 and 40574040) and Special Project for the Fundamental R & D of Institute of Geophysics, China Earthquake Administration (Grant No.DQJB08B20)     

Rupture behavior and deformation localization of the Kunlunshan earthquake (<Emphasis Type="Italic">M</Emphasis><Subscript><Emphasis Type="Italic">w</Emphasis></Subscript>7.8) and their tectonic implications

Earthquake surface rupture is the result of transformation from crustal elastic strain accumulation to permanent tectonic deformation. The surface rupture zone produced by the 2001 Kunlunshan earthquake (M _w 7.8) on the Kusaihu segment of the Kunlun fault extends over 426 km. It consists of three relatively independent surface rupture sections: the western strike-slip section, the middle transtensional section and the eastern strike-slip section. Hence this implies that the Kunlunshan earthquake is composed of three earthquake rupturing events, i.e. the M _w =6.8, M _w =6.2 and M _w ⩽=7.8 events, respectively. The M _w =7.8 earthquake, along the eastern section, is the main shock of the Kunlunshan earthquake, further decomposed into four rupturing subevents. Field measurements indicate that the width of a single surface break on different sections ranges from several meters to 15 m, with a maximum value of less than 30 m. The width of the surface rupture zone that consists of en echelon breaks depends on its geometric structures, especially the stepover width of the secondary surface rupture zones in en echelon, displaying a basic feature of deformation localization. Consistency between the Quaternary geologic slip rate, the GPS-monitored strain rate and the localization of the surface ruptures of the 2001 Kunlunshan earthquake may indicate that the tectonic deformation between the Bayan Har block and Qilian-Qaidam block in the northern Tibetan Plateau is characterized by strike-slip faulting along the limited width of the Kunlun fault, while the blocks themselves on both sides of the Kunlun fault are characterized by block motion. The localization of earthquake surface rupture zone is of great significance to determine the width of the fault-surface-rupture hazard zone, along which direct destruction will be caused by co-seismic surface rupturing along a strike-slip fault, that should be considered before the major engineering project, residental buildings and life line construction. Supported by the National Natural Science Foundation of China (Grant No. 40474037) and the National Basic Research Program of China (Grant No. 2004CB418401)     

The moment magnitude <Emphasis Type="Italic">M</Emphasis><Subscript>w</Subscript> and the energy magnitude <Emphasis Type="Italic">M</Emphasis><Subscript>e</Subscript>: common roots and differences

Starting from the classical empirical magnitude-energy relationships, in this article, the derivation of the modern scales for moment magnitude M _w and energy magnitude M _e is outlined and critically discussed. The formulas for M _w and M _e calculation are presented in a way that reveals, besides the contributions of the physically defined measurement parameters seismic moment M ₀ and radiated seismic energy E _S, the role of the constants in the classical Gutenberg–Richter magnitude–energy relationship. Further, it is shown that M _w and M _e are linked via the parameter Θ = log(E _S/M ₀), and the formula for M _e can be written as M _e = M _w + (Θ + 4.7)/1.5. This relationship directly links M _e with M _w via their common scaling to classical magnitudes and, at the same time, highlights the reason why M _w and M _e can significantly differ. In fact, Θ is assumed to be constant when calculating M _w. However, variations over three to four orders of magnitude in stress drop Δσ (as well as related variations in rupture velocity V _R and seismic wave radiation efficiency η _R) are responsible for the large variability of actual Θ values of earthquakes. As a result, for the same earthquake, M _e may sometimes differ by more than one magnitude unit from M _w. Such a difference is highly relevant when assessing the actual damage potential associated with a given earthquake, because it expresses rather different static and dynamic source properties. While M _w is most appropriate for estimating the earthquake size (i.e., the product of rupture area times average displacement) and thus the potential tsunami hazard posed by strong and great earthquakes in marine environs, M _e is more suitable than M _w for assessing the potential hazard of damage due to strong ground shaking, i.e., the earthquake strength. Therefore, whenever possible, these two magnitudes should be both independently determined and jointly considered. Usually, only M _w is taken as a unified magnitude in many seismological applications (ShakeMap, seismic hazard studies, etc.) since procedures to calculate it are well developed and accepted to be stable with small uncertainty. For many reasons, procedures for E _S and M _e calculation are affected by a larger uncertainty and are currently not yet available for all global earthquakes. Thus, despite the physical importance of E _S in characterizing the seismic source, the use of M _e has been limited so far to the detriment of quicker and more complete rough estimates of both earthquake size and strength and their causal relationships. Further studies are needed to improve E _S estimations in order to allow M _e to be extensively used as an important complement to M _w in common seismological practice and its applications.     

A new technique for moment tensor inversion with applications to the 2008 Wenchuan <Emphasis Type="Italic">M</Emphasis><Subscript>S</Subscript>8.0 earthquake sequence

A M_S8.0 earthquake occurred in Wenchuan County, Sichuan Province, China, on May 12, 2008, and subsequently, numerous aftershocks followed. We obtained the moment tensor solutions and source time functions (STFs) for the Wenchuan earthquake and its seven larger aftershocks (M_S5.0～6.0) by a new technique of moment tensor inversion using the broadband and long-period seismic waveform data from the Global Seismic Network (GSN). Firstly, the theoretical background and technical flow of the new technique was briefly introduced, and an aftershock of the Wenchuan earthquake sequence was employed to illustrate the real procedure for inverting the moment tensor; secondly, the moment tensor solutions and STFs of the eight events, including the main shock, were presented, and finally, the interpretation of the results was made. The agreement of our results with the GCMT results indicates the new approach is efficient and feasible. By using this approach, not only the moment tensor solution can be obtained but also the STF can be retrieved; the inverted STFs indicate that the source rupture process may be complicated even for the moderate earthquakes. The inverted focal mechanisms of the Wenchuan earthquake sequence show that the most of the aftershocks occurred in the main faults of the Longmenshan fault zone with predominantly thrustingwith minor right-lateral strike-slip component, but some of them may have occurred in the subfaults with strike-slip faulting in the vicinity of the main faults.     

Structural damage patterns in the villages of Korf and Tilichiki due to the <Emphasis Type="Italic">M</Emphasis><Subscript><Emphasis Type="Italic">S</Emphasis></Subscript> 7.7 April 20(21), 2006 Olyutorskii earthquake

The area of the Koryak Autonomous Okrug was hit by an M _S 7.7 earthquake on April 20(21), 2006, the largest to have occurred in the area during the period of historical and instrumental observation. This event is now referred to as the Olyutorskii earthquake. We present results from a study of the associated macroseismic effects as observed in the villages of Korf and Tilichiki. The intensity was IX at Korf and VIII at Tilichiki on the MSK-64 scale.     

Seismotectonic studies of the pleistoseist area of the <Emphasis Type="Italic">M</Emphasis> <Subscript> <Emphasis Type="Italic">s</Emphasis> </Subscript> = 6.9 Ilin-Tass earthquake in northeast Yakutia

The complex seismotectonic studies of the pleistoseist area of the Ilin-Tas earthquake (M_s = 6.9), one of the strongest seismic events ever recorded by the regional seismic network in northeastern Russia, are carried out. The structural tectonic position, morphotectonic features of present-day topography, active faults, and types of Cenozoic deformations of the epicentral zone are analyzed. The data of the instrumental observations are summarized, and the manifestations of the strong seismic events in the Yana–Indigirka segment of the Cherskii seismotectonic zone are considered. The explanation is suggested for the dynamical tectonic setting responsible for the Andrei-Tas seismic maximum. This setting is created by the influence of the Kolyma–Omolon indenter, which intrudes into the Cherskii seismotectonic zone from the region of the North American lithospheric plate and forms the main seismogenic structures of the Yana–Indigirka segment in the frontal zone (the Ilin-Tas anticlinorium). The highest seismic potential is noted in the Andrei- Tas block—the focus of the main tectonic impacts from the Kolyma–Omolon superterrane. The general trend of this block coincides with the orientation of the major axis of isoseismal ellipses (azimuth 50°–85°), which were determined from the observations of macroseismic effects on the ground after the Uyandina (M_s = 5.6), Andrei-Tas (M_s = 6.1), and Ilin-Tas (M_s = 6.9) earthquakes.     

Coseismic Coulomb failure stress changes caused by the 2017 <Emphasis Type="Italic">M</Emphasis>7.0 Jiuzhaigou earthquake,and its relationship with the 2008 Wenchuan earthquake

On August 8, 2017, a M7.0 earthquake occurred in Jiuzhaigou County, Sichuan Province, China, resulting in significant casualties and property damage. Therefore, it is critical to identify the areas of potential aftershocks before reconstruction and re-settling people to avoid future disasters. Based on the elastic dislocation theory and a multi-layered lithospheric model, we calculate the Coulomb failure stress changes caused by the Wenchuan and Jiuzhaigou earthquakes, discuss the relationship between the M_w7.9 Wenchuan and M7.0 Jiuzhaigou earthquakes, and analyze the influence of the aftershock distribution and stress changes on the major faults in this region caused by the Jiuzhaigou earthquake. The co- and post-seismic stress changes caused by the Wenchuan earthquake significantly increased the stress accumulation at the hypocenter of the Jiuzhaigou earthquake. Therefore, the occurrence of the Jiuzhaigou earthquake was probably stimulated by the Wenchuan earthquake. The aftershock distribution is well explained by the co-seismic stress changes of the Jiuzhaigou earthquake. The stress accumulation and corresponding seismic hazard on the Maqu-Heye segment of the East Kunlun fault and the northern extremity of the Huya fault has been further increased by the Jiuzhaigou earthquake.     

The 20-second regional magnitude <Emphasis Type="Italic">M</Emphasis><Subscript><Emphasis Type="Italic">S</Emphasis></Subscript>(20R) for the Russian Far East

A new modified magnitude scale M _S (20R) is elaborated. It permits us to extend the teleseismic magnitude scale M _S (20) to the regional epicenter distances. The data set used in this study contains digital records at 12 seismic stations of 392 earthquakes that occured in the northwest Pacific Ocean in the period of 1993–2008. The new scale is based on amplitudes of surface waves of a narrow range of the periods (16–25 s) close to the period of 20 s, for distances of 80–3000 km. The digital Butterworth filter is used for processing. On the basis of the found regional features concerning distance dependence for seismic wave attenuation, all the stations of the region have been subdivided into two groups, namely, “continental” and “island-arc.” For each group of stations, its own calibration function is proposed. Individual station corrections are used to compensate for the local features.     

The earthquake of July 22, 2011 (<Emphasis Type="Italic">M</Emphasis><Subscript><Emphasis Type="Italic">w</Emphasis></Subscript> = 4.5) in a low-seismicity area of the Argun region

The paper considers the Argun earthquake of July 22, 2011 (M _w = 4.5), which occurred in the Argun River valley in a low-seismicity territory in China. The focal parameters of the earthquake (depth of the hypocenter, moment magnitude, scalar seismic moment, and focal mechanism) were determined by calculating the seismic moment tensor from the amplitude spectra of surface waves and the data on the signs of the first arrivals of body waves at regional stations. The solution of the focal mechanism makes it possible to assume a relationship between the earthquake focus and a fault with a northeastern strike bordering the southeastern side of the Argun Basin (in Chinese territory). The Argun earthquake was felt in Russia with an intensity of II–III to V at the epicentral distances up to 255 km. The intensity of shaking did not exceed values suggested by new GSZ-2012 and GSZ-2014 seismic zoning maps of Russian territory. Nevertheless, the question on the possible occurrence of stronger earthquakes in the studied region remains open.     

Water-level changes in the wells of Kamchatka at the time of the <Emphasis Type="Italic">M</Emphasis><Subscript><Emphasis Type="Italic">w</Emphasis></Subscript> 7.6, April 20, 2006 Olyutorskii earthquake

The seismic waves excited by the M _w 7.6 Olyutorskii earthquake that occurred on April 20, 2006 in the Koryak Upland gave rise to water-level changes in five wells situated in continental areas of Kamchatka at hypocentral distances of 750–1150 km. We describe the effects due to seismic waves, as well as the water-level anomalies for February–April 2006 before the earthquake. We used an original technique for the processing of water-level records based on the study of barometric and tidal water-level responses in order to estimate the volume strain in water-saturated rocks during synchronous level variations at two wells. We discuss possible mechanisms for producing anomalous water-level changes due to elastic deformation of monitored groundwater reservoirs and to crack dilatancy in the water-saturated rocks.     

Joint inversion of GNSS and teleseismic data for the rupture process of the 2017 <Emphasis Type="Italic">M</Emphasis><Subscript>w</Subscript>6.5 Jiuzhaigou,China, earthquake

The spatio-temporal slip distribution of the earthquake that occurred on 8 August 2017 in Jiuzhaigou, China, was estimated from the teleseismic body wave and near-field Global Navigation Satellite System (GNSS) data (coseismic displacements and high-rate GPS data) based on a finite fault model. Compared with the inversion results from the teleseismic body waves, the near-field GNSS data can better restrain the rupture area, the maximum slip, the source time function, and the surface rupture. The results show that the maximum slip of the earthquake approaches 1.4 m, the scalar seismic moment is ~ 8.0 × 10¹⁸ N·m (M_w?≈?6.5), and the centroid depth is ~ 15 km. The slip is mainly driven by the left-lateral strike-slip and it is initially inferred that the seismogenic fault occurs in the south branch of the Tazang fault or an undetectable fault, a NW-trending left-lateral strike-slip fault, and belongs to one of the tail structures at the easternmost end of the eastern Kunlun fault zone. The earthquake rupture is mainly concentrated at depths of 5–15 km, which results in the complete rupture of the seismic gap left by the previous four earthquakes with magnitudes >?6.0 in 1973 and 1976. Therefore, the possibility of a strong aftershock on the Huya fault is low. The source duration is ~ 30 s and there are two major ruptures. The main rupture occurs in the first 10 s, 4 s after the earthquake; the second rupture peak arrives in ~ 17 s. In addition, the Coulomb stress study shows that the epicenter of the earthquake is located in the area where the static Coulomb stress change increased because of the 12 May 2017 M_w7.9 Wenchuan, China, earthquake. Therefore, the Wenchuan earthquake promoted the occurrence of the 8 August 2017 Jiuzhaigou earthquake.     

3D <Emphasis Type="Italic">v</Emphasis><Subscript>P</Subscript> and <Emphasis Type="Italic">v</Emphasis><Subscript>S</Subscript> models of southeastern margin of the Tibetan plateau from joint inversion of body-wave arrival times and surface-wave dispersion data

A new 3D velocity model of the crust and upper mantle in the southeastern (SE) margin of the Tibetan plateau was obtained by joint inversion of body- and surface-wave data. For the body-wave data, we used 7190 events recorded by 102 stations in the SE margin of the Tibetan plateau. The surface-wave data consist of Rayleigh wave phase velocity dispersion curves obtained from ambient noise cross-correlation analysis recorded by a dense array in the SE margin of the Tibetan plateau. The joint inversion clearly improves the v _S model because it is constrained by both data types. The results show that at around 10 km depth there are two low-velocity anomalies embedded within three high-velocity bodies along the Longmenshan fault system. These high-velocity bodies correspond well with the Precambrian massifs, and the two located to the northeast of 2013 M _S 7.0 Lushan earthquake are associated with high fault slip areas during the 2008 Wenchuan earthquake. The aftershock gap between 2013 Lushan earthquake and 2008 Wenchuan earthquake is associated with low-velocity anomalies, which also acts as a barrier zone for ruptures of two earthquakes. Generally large earthquakes (M ≥ 5) in the region occurring from 2008 to 2015 are located around the high-velocity zones, indicating that they may act as asperities for these large earthquakes. Joint inversion results also clearly show that there exist low-velocity or weak zones in the mid-lower crust, which are not evenly distributed beneath the SE margin of Tibetan plateau.     

Preliminary analysis on the source properties and seismogenic structure of the 2017 <Emphasis Type="Italic">M</Emphasis><Subscript>s</Subscript>7.0 Jiuzhaigou earthquake

At GMT time 13:19, August 8, 2017, an M_s7.0 earthquake struck the Jiuzhaigou region in Sichuan Province, China, causing severe damages and casualties. To investigate the source properties, seismogenic structures, and seismic hazards, we systematically analyzed the tectonic environment, crustal velocity structure in the source region, source parameters and rupture process, Coulomb failure stress changes, and 3-D features of the rupture plane of the Jiuzhaigou earthquake. Our results indicate the following: (1) The Jiuzhaigou earthquake occurred on an unmarked fault belonging to the transition zone of the east Kunlun fault system and is located northwest of the Huya fault. (2) Both the mainshock and aftershock rupture zones are located in a region where crustal seismic velocity changes dramatically. Southeast to the source region, shear wave velocity at the middle to lower crust is significantly low, but it rapidly increases northeastward and lies close to the background velocity across the rupture fault. (3) The aftershock zone is narrow and distributes along the northwest-southeast trend, and most aftershocks occur within a depth range of 5–20 km. (4) The focal mechanism of the Jiuzhaigou earthquake indicates a left-lateral strike-slip fault, with strike, dip, and rake angles of 152°, 74° and 8°, respectively. The hypocenter depth measures 20 km, whereas the centroid depth is about 6 km. The co-seismic rupture mainly concentrates at depths of 3–13 km, with a moment magnitude (M_w) of 6.5. (5) The co-seismic rupture also strengthens the Coulomb failure stress at the two ends of the rupture fault and the east segment of the Tazang fault. Aftershocks relocation results together with geological surveys indicate that the causative fault is a near vertical fault with notable spatial variations: dip angle varies within 66°–89° from northwest to southeast and the average dip angle measures ~84°. The results of this work are of fundamental importance for further studies on the source characteristics, tectonic environment, and seismic hazard evaluation of the Jiuzhaigou earthquake.     

A new <Emphasis Type="Italic">M</Emphasis><Subscript><Emphasis Type="Italic">w</Emphasis></Subscript> estimation parameter for use in earthquake early warning systems

We propose a method that employs the squared displacement integral (ID2) to estimate earthquake magnitudes in real time for use in earthquake early warning (EEW) systems. Moreover, using τ _c and P _d for comparison, we establish formulas for estimating the moment magnitudes of these three parameters based on the selected aftershocks (4.0 ≤ M _s  ≤ 6.5) of the 2008 Wenchuan earthquake. In this comparison, the proposed ID2 method displays the highest accuracy. Furthermore, we investigate the applicability of the initial parameters to large earthquakes by estimating the magnitude of the Wenchuan M _s 8.0 mainshock using a 3-s time window. Although these three parameters all display problems with saturation, the proposed ID2 parameter is relatively accurate. The evolutionary estimation of ID2 as a function of the time window shows that the estimation equation established with ID2 ^Ref determined from the first 8-s of P wave data can be directly applicable to predicate the magnitudes of 8.0. Therefore, the proposed ID2 parameter provides a robust estimator of earthquake moment magnitudes and can be used for EEW purposes.     

Stress changes on major faults caused by <Emphasis Type="Italic">M</Emphasis><Subscript>w</Subscript>7.9 Wenchuan earthquake,May 12, 2008

On May 12, 2008, a magnitude 7.9 earthquake ruptured the Longmenshan fault system in Sichuan Province, China, collapsing buildings and killing tens of thousands people. As predicted, aftershocks may last for at least one year, and moreover, large aftershocks are likely to occur. Therefore, it is critical to outline the areas with potential aftershocks before reconstruction and re-settling people as to avoid future disasters. It is demonstrated that the redistribution of stress induced by an earthquake should trigger successive seismic activity. Based on static stress triggering theory, we calculated the coseismic stress changes on major faults induced by the Wenchuan earthquake, with elastic dislocation theory and the multilayered crustal model. We also discuss the stress distribution and its significance for future seismic activity under the impact of the Wenchuan earthquake. It is shown that coulomb failure stress (CFS) increases obviously on the Daofu-Kangding segment of the Xianshuihe Fault, the Maqu and Nanping segment of the Eastern Kunlun Fault, the Qingchuan Fault, southern segment of the Minjiang Fault, Pengxian-Guanxian Fault, Jiangyou-Guangyuan Fault, and Jiangyou-Guanxian Fault. The increased stress raises the probability of earthquake occurrence on these faults. Since these areas are highly populated, earthquake monitoring and early disaster alarm system are needed. CFS increases with a magnitude of 0.03–0.06 MPa on the Qingchuan Fault, which is close to the northern end of the rapture of Wenchuan earthquake. The occurrence of some strong aftershocks, including three events with magnitude higher than 5.0, indicates that the seismic activities have been triggered by the main shock. Aftershocks seem to migrate northwards. Since the CFS change on the Lueyang-Mianxian Fault located on the NEE of the Qingchuan Fault is rather small (±0.01 MPa), the migration of aftershocks might be terminated in the area near Hanzhong City. The CFS change on the western Qinling Fault is around 10 Pa, and the impact of static triggering can be neglected. The increment of CFS on the Pengxian-Guanxian Fault and Beichuan-Yingxiu Fault southwest to the main rupture is 0.005–0.015 MPa, which would facilitate earthquake triggering in these areas. Very few aftershocks in these areas indicate that the accumulated stress has not been released sufficiently. High seismic risk is predicated in these areas due to co-seismic CFS loading. The Wenchuan earthquake released the accumulated CFS on the Fubianhe Fault, the Huya Fault, the Ha’nan-Qingshanwan Fault, and the Diebu-Bailongjiang Fault. The decrement of CFS changes on the Longquanshan Fault east to Chengdu City is about 0.002 MPa. The seismic activity will be depressed by decrement of CFS on these faults. Supported by Knowledge Innovation Program of Chinese Academy of Sciences (Grant No. KZCX-SW-153), National Natural Science Foundation of China (Grant Nos. 40574011 and 40474028)     

On the Ultra Long Propagation of Felt Ground Motion Due to the <Emphasis Type="Italic">M</Emphasis><Subscript><Emphasis Type="Italic">w</Emphasis></Subscript> 8.3 Deep-Focus Sea-of-Okhotsk Earthquake of May 24, 2013

This study uses macroseismic data and wave equations to solve the problem of ultra long propagation of felt ground motion (over 9000 km from the epicenter) due to the Sea-of-Okhotsk earthquake. We show that the principal mechanism of this phenomenon could be excitation of a previously unknown standing radial wave as a mode of the Earth’s free oscillations, ₀S₀, due to the superposition of an incident and a reflected spherical P wave in the epicentral area of the Sea-of-Okhotsk earthquake. The standing wave generates slowly attenuating P waves that travel over the earth’s surface that act as carrying waves; when superposed on these, direct body waves acquire the ability to travel over great distances. We show previously unknown parameters of the radial mode ₀S₀ for the initial phase of earth deformation due to the large deep-focus earthquake. We used data on the Sea-of-Okhotsk and Bolivian earthquakes to show that large deep-focus earthquakes can excite free oscillations of the Earth that are not only recorded by instrumental means, but are also felt by people, with the amplification of the macroseismic effect being directly related to the phenomenon of resonance for multistory buildings.     

Deep tectonic setting of the 2008 Wenchuan <Emphasis Type="Italic">M</Emphasis><Subscript>s</Subscript>8.0 earthquake in southwestern China

Teleseismic P-wave receiver functions at 20 broadband seismic stations in the Longmenshan fault zone (LMFZ) and its vicinity were extracted, and the crustal thickness and the P- and S-wave velocity ratio were calculated by use of the H-k stacking algorithm. With the results as constraints, the S-wave velocity structures beneath each station were determined by the inversion of receiver functions. The crustal structure of the Rear-range zone is similar to that of the Songpan-Garze Block, whereas the velocity structure of the Fore-range zone resembles that of Sichuan Basin, implying that the Central Principal Fault of LMFZ is the boundary between the eastern Tibetan Plateau and the Yangtze Block. Lower velocity zone exists in lower crust of the Songpan-Garze Block and the central-southern segment of the Rear-range zone, which facilitates the detachment of the material in upper and middle crust. Joint analysis of the receiver functions and the Bouguer gravity anomalies supports the thesis on the detachment-thrust mode of the LMFZ. A double-detachment pattern is suggested to the tectonic setting in the Songpan-Garze Block. The upper detachment occurs at the depth of 10-15 km, and represents a high-temperature ductile shear zone. There is a lower detachment at the depth of about 30 km, below which the lower crust flow exists in the eastern Tibetan Plateau. Interpretation of the Bouguer gravity anomalies indicates that the Sichuan Basin is of higher density in upper and middle crust in comparison with that of the Songpan-Garze Block. The LMFZ with higher density is the result from the thrusting of the Songpan-Garze Block over the Sichuan Basin. In the lower crust, higher P velocity and higher density in the Sichuan Basin are related to more rigid material, while lower S velocity and lower density in the Songpan-Garze Block are related to the softened and weakened material. The higher density block beneath the Sichuan Basin obstructs the eastward flow of lower crustal material from the Tibetan Plateau, which is driven by the compression of northward movement of Indian Plate. The eastward movement of upper and middle crustal material is also obstructed by the rigid Yangtze Block, resulting in the stress concentrated and accumulated along the LMFZ. When the stress releases sharply, the Wenchuan M _s8.0 earthquake occurs. Supported by the National Natural Science Foundation of China (Grant Nos. 40334041, 40774037) and Joint Foundation of Earthquake Science (Grant No. 1040062)     

The instability of the <Emphasis Type="Italic">M</Emphasis><Subscript>W</Subscript> and <Emphasis Type="Italic">M</Emphasis><Subscript>L</Subscript> comparison for earthquakes in Greece for the period 1969 to 2007

We use 576 earthquakes of magnitude, M _w, 3.3 to 6.8 that occurred within the region 33° N–42.5° N, 19° E–30° E in the time period 1969 to 2007 to investigate the stability of the relation between moment magnitude, M _w, and local magnitude, M _L, for earthquakes in Greece and the surrounding regions. We compare M _w to M _L as reported in the monthly bulletins of the National Observatory of Athens (NOA) and to M _L as reported in the bulletins of the Seismological Station of the Aristotle University of Thessaloniki. All earthquakes have been analyzed through regional or teleseismic waveform inversion, to obtain M _w, and have measured maximum trace amplitudes on the Wood–Anderson seismograph in Athens, which has been in operation since 1964. We show that the Athens Wood–Anderson seismograph performance has changed through time, affecting the computed by NOA M _L by at least 0.1 magnitude units. Specifically, since the beginning of 1996, its east–west component has been recording systematically much larger amplitudes compared to the north–south component. From the comparison between M _w and M _L reported by Thessaloniki, we also show that the performance of the sensors has changed several times through time, affecting the calculated M _L’s. We propose scaling relations to convert the M _L values reported from the two centers to M _w. The procedures followed here can be applied to other regions as well to examine the stability of magnitude calculations through time.     

Numerical simulation of strong ground motion for the <Emphasis Type="Italic">M</Emphasis><Subscript>s</Subscript>8.0 Wenchuan earthquake of 12 May 2008

The Wenchuan earthquake of 12 May 2008 is the most destructive earthquake in China in the past 30 years in terms of property damage and human losses. In order to understand the earthquake process and the geo-morphological factors affecting the seismic hazard, we simulated the strong ground motion caused by the earthquake, incorporating three-dimensional (3D) earth structure, finite-fault rupture, and realistic surface topography. The simulated ground motions reveal that the fault rupture and basin structure control the overall pattern of the peak ground shaking. Large peak ground velocity (PGV) is distributed in two narrow areas: one with the largest PGV values is above the hanging wall of the fault and attributed to the locations of fault asperities and rupture directivity; the other is along the northwestern margin of the Sichuan Basin and caused by both the directivity of fault rupture and the amplification in the thick sediment basin. Rough topography above the rupture fault causes wave scattering, resulting in significantly larger peak ground motion on the apex of topographic relief than in the valley. Topography and scattering also reduce the wave energy in the forward direction of fault rupture but increase the PGV in other parts of the basin. These results suggest the need for a localized hazard assessment in places of rough topography that takes the topographic effects into account. Finally, had the earthquake started at the northeast end of the fault zone and ruptured to the southwest, Chengdu would have suffered a much stronger shaking than it experienced on 12 May, 2008. Supported by the U.S. National Science Foundation (Grant Nos. EAR 0738779 and OCE 0727919), the National Basic Research Program of China (Grant No. 2004CB418404), and partially by the National Nature Science Foundation of China (Grant No. 40521002)