A conservative semi‐implicit method for coupled surface–subsurface flows in regional scale

A semi‐implicit method for coupled surface–subsurface flows in regional scale is proposed and analyzed. The flow domain is assumed to have a small vertical scale as compared with the horizontal extents. Thus, after hydrostatic approximation, the simplified governing equations are derived from the Reynolds averaged Navier–Stokes equations for the surface flow and from the Darcy's law for the subsurface flow. A conservative free‐surface equation is derived from a vertical integral of the incompressibility condition and extends to the whole water column including both, the surface and the subsurface, wet domains. Numerically, the horizontal domain is covered by an unstructured orthogonal grid that may include subgrid specifications. Along the vertical direction a simple z‐layer discretization is adopted. Semi‐implicit finite difference equations for velocities and a finite volume approximation for the free‐surface equation are derived in such a fashion that, after simple manipulation, the resulting discrete free‐surface equation yields a single, well‐posed, mildly nonlinear system. This system is efficiently solved by a nested Newton‐type iterative method that yields simultaneously the pressure and a non‐negative fluid volume throughout the computational grid. The time‐step size is not restricted by stability conditions dictated by friction or surface wave speed. The resulting algorithm is simple, extremely efficient, and very accurate. Exact mass conservation is assured also in presence of wetting and drying dynamics, in pressurized flow conditions, and during free‐surface transition through the interface. A few examples illustrate the model applicability and demonstrate the effectiveness of the proposed algorithm. Copyright © 2015 John Wiley & Sons, Ltd.     

Integrated numerical model for vegetated surface and saturated subsurface flow interaction

The construction of an integrated numerical model is presented in this paper to deal with the interactions between vegetated surface and saturated subsurface flows. A numerical model is built by integrating the previously developed quasi-three-dimensional (Q3D) vegetated surface flow model with a two-dimensional (2D) saturated groundwater flow model. The vegetated surface flow model is constructed by coupling the explicit finite volume solution of 2D shallow water equations (SWEs) with the implicit finite difference solution of Navier-Stokes equations (NSEs) for vertical velocity distribution. The subsurface model is based on the explicit finite volume solution of 2D saturated groundwater flow equations (SGFEs). The ground and vegetated surface water interaction is achieved by introducing source-sink terms into the continuity equations. Two solutions are tightly coupled in a single code. The integrated model is applied to four test cases, and the results are satisfactory.     

A semi‐implicit finite difference method for non‐hydrostatic,free‐surface flows

In this paper a semi‐implicit finite difference model for non‐hydrostatic, free‐surface flows is analyzed and discussed. It is shown that the present algorithm is generally more accurate than recently developed models for quasi‐hydrostatic flows. The governing equations are the free‐surface Navier–Stokes equations defined on a general, irregular domain of arbitrary scale. The momentum equations, the incompressibility condition and the equation for the free‐surface are integrated by a semi‐implicit algorithm in such a fashion that the resulting numerical solution is mass conservative and unconditionally stable with respect to the gravity wave speed, wind stress, vertical viscosity and bottom friction. Copyright © 1999 John Wiley & Sons, Ltd.     

A semi‐implicit numerical method for the free‐surface Navier–Stokes equations

Semi‐implicit methods are known for being the basis of simple, efficient, accurate, and stable numerical algorithms for simulating a large variety of geophysical free‐surface flows. Geophysical flows are typically characterized by having a small vertical scale as compared with their horizontal extents. Hence, the hydrostatic approximation often applies, and the free surface can be conveniently represented by a single‐valued function of the horizontal coordinates. In the present investigation, semi‐implicit methods are extended to complex free‐surface flows that are governed by the full incompressible Navier–Stokes equations and are delimited by solid boundaries and arbitrarily shaped free‐surfaces. The primary dependent variables are the velocity components and the pressure. Finite difference equations for momentum, and a finite volume discretization for continuity, are derived in such a fashion that, after simple manipulation, the resulting pressure equation yields a well‐posed piecewise linear system from which both the pressure and the fluid volume within each computational cell are naturally derived. This system is efficiently solved by a nested Newton type iterative scheme, and the resulting fluid volumes are assured to be nonnegative and bounded from above by the available cell volumes. The time step size is not restricted by stability conditions dictated by surface wave speed, but can be freely chosen just to achieve the desired accuracy. Several examples illustrate the model applicability to a large range of complex free‐surface flows and demonstrate the effectiveness of the proposed algorithm. Copyright © 2013 John Wiley & Sons, Ltd.     

An implicit two‐dimensional non‐hydrostatic model for free‐surface flows

An implicit finite volume model in sigma coordinate system is developed to simulate two‐dimensional (2D) vertical free surface flows, deploying a non‐hydrostatic pressure distribution. The algorithm is based on a projection method which solves the complete 2D Navier–Stokes equations in two steps. First the pressure term in the momentum equations is excluded and the resultant advection–diffusion equations are solved. In the second step the continuity and the momentum equation with only the pressure terms are solved to give a block tri‐diagonal system of equation with pressure as the unknown. This system can be solved by a direct matrix solver without iteration. A new implicit treatment of non‐hydrostatic pressure, similar to the lower layers is applied to the top layer which makes the model free of any hydrostatic pressure assumption all through the water column. This treatment enables the model to evaluate both free surface elevation and wave celerity more accurately. A series of numerical tests including free‐surface flows with significant vertical accelerations and nonlinear behaviour in shoaling zone are performed. Comparison between numerical results, analytical solutions and experimental data demonstrates a satisfactory performance. Copyright © 2006 John Wiley & Sons, Ltd.     

Three‐dimensional modeling of non‐hydrostatic free‐surface flows on unstructured grids

A three‐dimensional numerical model is presented for the simulation of unsteady non‐hydrostatic shallow water flows on unstructured grids using the finite volume method. The free surface variations are modeled by a characteristics‐based scheme, which simulates sub‐critical and super‐critical flows. Three‐dimensional velocity components are considered in a collocated arrangement with a σ‐coordinate system. A special treatment of the pressure term is developed to avoid the water surface oscillations. Convective and diffusive terms are approximated explicitly, and an implicit discretization is used for the pressure term to ensure exact mass conservation. The unstructured grid in the horizontal direction and the σ coordinate in the vertical direction facilitate the use of the model in complicated geometries. Solution of the non‐hydrostatic equations enables the model to simulate short‐period waves and vertically circulating flows. Copyright © 2015 John Wiley & Sons, Ltd.     

Comparing analytical and numerical solution of nonlinear two and three‐dimensional hydrostatic flows

New test cases for frictionless, three‐dimensional hydrostatic flows have been derived from some known analytical solutions of the two‐dimensional shallow water equations. The flow domain is a paraboloid of revolution and the flow is determined by the initial conditions, the nonlinear advective terms, the Coriolis acceleration and by the hydrostatic pressure. Wetting and drying is also included. Some specific properties of the exact solutions are discussed under different hypothesis and relative importance of the forcing terms. These solutions are proposed for testing the stability, the accuracy and the efficiency of numerical models to be used for simulating environmental hydrostatic flows. The computed solutions obtained with a semi‐implicit finite difference—finite volume algorithm on unstructured grid are compared with the corresponding analytical solutions in both two and three space dimension. Excellent agreement are obtained for the velocity and for the resulting water surface elevation. Comparison of the computed inundation area also shows a good agreement with the analytical solution with degrading accuracy observed when the inundation area becomes relatively large and for long simulation time. Copyright © 2006 John Wiley & Sons, Ltd.     

Finite volume solution to integrated shallow surface–saturated groundwater flow

This paper describes development of an integrated shallow surface and saturated groundwater model (GSHAW5). The surface flow motion is described by the 2‐D shallow water equations and groundwater movement is described by the 2‐D groundwater equations. The numerical solution of these equations is based on the finite volume method where the surface water fluxes are estimated using the Roe shock‐capturing scheme, and the groundwater fluxes are computed by application of Darcy's law. Use of a shock‐capturing scheme ensures ability to simulate steady and unsteady, continuous and discontinuous, subcritical and supercritical surface water flow conditions. Ground and surface water interaction is achieved by the introduction of source‐sink terms into the continuity equations. Two solutions are tightly coupled in a single code. The numerical solutions and coupling algorithms are explained. The model has been applied to 1‐D and 2‐D test scenarios. The results have shown that the model can produce very accurate results and can be used for simulation of situations involving interaction between shallow surface and saturated groundwater flows. Copyright © 2005 John Wiley & Sons, Ltd.     

Compatibility between finite volumes and finite elements using solutions of shallow water equations for substance transport

This paper formulates a finite volume analogue of a finite element schematization of three‐dimensional shallow water equations. The resulting finite volume schematization, when applied to the continuity equation, exactly reproduces the set of matrix equations that is obtained by the application of the corresponding finite element schematization to the continuity equation. The procedure allows the consistent and mass conserving coupling of the finite element Telemac model for three‐dimensional flow with the finite volume Delft3D‐WAQ model for water quality. The work has been carried out as part of a joint development by LNHE and WL∣Delft Hydraulics to explore the mutual interaction of their software. Copyright © 2006 John Wiley & Sons, Ltd.     

Computational modelling of variably saturated flow in porous media with complex three‐dimensional geometries

A computational procedure is presented for solving complex variably saturated flows in porous media, that may easily be implemented into existing conventional finite‐volume‐based computational fluid dynamics codes, so that their functionality might be geared upon to readily enable the modelling of a complex suite of interacting fluid, thermal and chemical reaction process physics. This procedure has been integrated within a multi‐physics finite volume unstructured mesh framework, allowing arbitrarily complex three‐dimensional geometries to be modelled. The model is particularly targeted at ore heap‐leaching processes, which encounter complex flow problems, such as infiltration into dry soil, drainage, perched water tables and flow through heterogeneous materials, but is equally applicable to any process involving flow through porous media, such as in environmental recovery processes. The computational procedure is based on the mixed form of the classical Richards equation, employing an adaptive transformed mixed algorithm that is numerically robust and significantly reduces compute (or CPU) time. The computational procedure is accurate (compares well with other methods and analytical data), comprehensive (representing any kind of porous flow model), and is computationally efficient. As such, this procedure provides a suitable basis for the implementation of large‐scale industrial heap‐leach models. Copyright © 2005 John Wiley & Sons, Ltd.     

Wet/dry areas method for interfacial (free surface) flow

In this paper, a new numerical method is developed for two‐dimensional interfacial (free surface) flows, based on the control volume method and conservative integral form of the Navier–Stokes equations with a standard staggered grid. The new method deploys two continuity equations, the continuity equation of the mass conservation for better convergence of the implicit scheme and the continuity equation of the volume conservation for the equation of pressure correction. The convection terms (the total momentum flux) on the surfaces of control volume are accurately calculated from the wet area exposed to the water, and the dry area exposed to the air. The numerical results produced by the new numerical method agree very well with the analytical solution, experimental images and experimentally measured velocity. Copyright © 2012 John Wiley & Sons, Ltd.     

A marker‐and‐cell approach to free surface 2‐D multiphase flows

This work describes a methodology to simulate free surface incompressible multiphase flows. This novel methodology allows the simulation of multiphase flows with an arbitrary number of phases, each of them having different densities and viscosities. Surface and interfacial tension effects are also included. The numerical technique is based on the GENSMAC front‐tracking method. The velocity field is computed using a finite‐difference discretization of a modification of the Navier–Stokes equations. These equations together with the continuity equation are solved for the two‐dimensional multiphase flows, with different densities and viscosities in the different phases. The governing equations are solved on a regular Eulerian grid, and a Lagrangian mesh is employed to track free surfaces and interfaces. The method is validated by comparing numerical with analytic results for a number of simple problems; it was also employed to simulate complex problems for which no analytic solutions are available. The method presented in this paper has been shown to be robust and computationally efficient. Copyright © 2012 John Wiley & Sons, Ltd.     

A novel non‐upwind,interconnected, multi‐grid,overlapping numerical procedure for problems involving fluid flow

A novel numerical procedure for heat, mass and momentum transfer in fluid flow is presented. The new scheme is passed on a non‐upwind, interconnected, multi‐grid, overlapping (NIMO) finite‐difference algorithm. In 2D flows, the NIMO algorithm solves finite‐difference equations for each dependent variable on four overlapping grids. The finite‐difference equations are formulated using the control‐volume approach, such that no interpolations are needed for computing the convective fluxes. For a particular dependent variable, four fields of values are produced. The NIMO numerical procedure is tested against the exact solution of two test problems. The first test problem is an oblique laminar 2D flow with a double step abrupt change in a passive scalar variable for infinite Peclet number. The second test problem is a rotating radial flow in an annular sector with a single step abrupt change in a passive scalar variable for infinite Peclet number. The NIMO scheme produced essentially the exact solution using different uniform and non‐uniform square and rectangular grids for 45 and 30° angle of inclination. All other schemes were unable to capture the exact solution, especially for the rectangular and non‐uniform grids. The NIMO scheme was also successful in predicting the exact solution for the rotating radial flow, using a uniform cylindrical‐polar coordinate grid. Copyright © 2008 John Wiley & Sons, Ltd.     

Global volume conservation in unsteady free surface flows with energy absorbing far‐end boundaries

A wave absorption filter for the far‐end boundary of semi‐infinite large reservoirs is developed for numerical simulation of unsteady free surface flows. Mathematical model is based on finite volume solution of the Navier–Stokes equations and depth‐integrated continuity equation to track the free surface. The Sommerfeld boundary condition is applied at the far‐end of the truncated computational domain. A dissipation zone is formed by applying artificial pressure on water surface to dissipate the kinetic energy of the outgoing waves. The computational scheme is tested to verify the conservation of total fluid volume in the domain for long simulation durations. Combination of the Sommerfeld boundary and dissipation zone can effectively minimize reflections and prevent cumulative changes in total fluid volume in the domain. Solitary wave, nonlinear periodic waves and irregular waves are simulated to illustrate the numerical developments. Earthquake excited surface waves and nonlinear hydrodynamic pressures in a dam–reservoir are computed. Copyright © 2009 John Wiley & Sons, Ltd.     

Baroclinic stability for a family of two‐level,semi‐implicit numerical methods for the 3D shallow water equations

The baroclinic stability of a family of two time‐level, semi‐implicit schemes for the 3D hydrostatic, Boussinesq Navier–Stokes equations (i.e. the shallow water equations), which originate from the TRIM model of Casulli and Cheng (Int. J. Numer. Methods Fluids 1992; 15 :629–648), is examined in a simple 2D horizontal–vertical domain. It is demonstrated that existing mass‐conservative low‐dissipation semi‐implicit methods, which are unconditionally stable in the inviscid limit for barotropic flows, are unstable in the same limit for baroclinic flows. Such methods can be made baroclinically stable when the integrated continuity equation is discretized with a barotropically dissipative backwards Euler scheme. A general family of two‐step predictor‐corrector schemes is proposed that have better theoretical characteristics than existing single‐step schemes. Copyright © 2006 John Wiley & Sons, Ltd.     

A depth‐integrated non‐hydrostatic finite element model for wave propagation

This paper presents a two‐dimensional finite element model for simulating dynamic propagation of weakly dispersive waves. Shallow water equations including extra non‐hydrostatic pressure terms and a depth‐integrated vertical momentum equation are solved with linear distributions assumed in the vertical direction for the non‐hydrostatic pressure and the vertical velocity. The model is developed based on the platform of a finite element model, CCHE2D. A physically bounded upwind scheme for the advection term discretization is developed, and the quasi second‐order differential operators of this scheme result in no oscillation and little numerical diffusion. The depth‐integrated non‐hydrostatic wave model is solved semi‐implicitly: the provisional flow velocity is first implicitly solved using the shallow water equations; the non‐hydrostatic pressure, which is implicitly obtained by ensuring a divergence‐free velocity field, is used to correct the provisional velocity, and finally the depth‐integrated continuity equation is explicitly solved to satisfy global mass conservation. The developed wave model is verified by an analytical solution and validated by laboratory experiments, and the computed results show that the wave model can properly handle linear and nonlinear dispersive waves, wave shoaling, diffraction, refraction and focusing. Copyright © 2013 John Wiley & Sons, Ltd.     

Development of new finite volume schemes on unstructured triangular grid for simulating the gas–liquid two‐phase flow

This paper presents a coupled finite volume inner doubly iterative efficient algorithm for linked equations (IDEAL) with level set method to simulate the incompressible gas–liquid two‐phase flows with moving interfaces on unstructured triangular grid. The finite volume IDEAL method on a collocated grid is employed to solve the incompressible two‐phase Navier–Stokes equations, and the level set method is used to capture the moving interfaces. For the sake of mass conservation, an effective second‐order accurate finite volume scheme is developed to solve the level set equation on triangular grid, which can be implemented much easier than the classical high‐order level set solvers. In this scheme, the value of level set function on the boundary of control volume is approximated using a linear combination of a high‐order Larangian interpolation and a second‐order upwind interpolation. By the rotating slotted disk and stretching and shrinking of a circular fluid element benchmark cases, the mass conservation and accuracy of the new scheme is verified. Then the coupled method is applied to two‐phase flows, including a 2D bubble rising problem and a 2D dam breaking problem. The computational results agree well with those reported in literatures and experimental data. Copyright © 2015 John Wiley & Sons, Ltd.     

An efficient finite difference scheme for free‐surface flows in narrow rivers and estuaries

This paper presents a free‐surface correction (FSC) method for solving laterally averaged, 2‐D momentum and continuity equations. The FSC method is a predictor–corrector scheme, in which an intermediate free surface elevation is first calculated from the vertically integrated continuity equation after an intermediate, longitudinal velocity distribution is determined from the momentum equation. In the finite difference equation for the intermediate velocity, the vertical eddy viscosity term and the bottom‐ and sidewall friction terms are discretized implicitly, while the pressure gradient term, convection terms, and the horizontal eddy viscosity term are discretized explicitly. The intermediate free surface elevation is then adjusted by solving a FSC equation before the intermediate velocity field is corrected. The finite difference scheme is simple and can be easily implemented in existing laterally averaged 2‐D models. It is unconditionally stable with respect to gravitational waves, shear stresses on the bottom and side walls, and the vertical eddy viscosity term. It has been tested and validated with analytical solutions and field data measured in a narrow, riverine estuary in southwest Florida. Model simulations show that this numerical scheme is very efficient and normally can be run with a Courant number larger than 10. It can be used for rivers where the upstream bed elevation is higher than the downstream water surface elevation without any problem. Copyright © 2003 John Wiley & Sons, Ltd.     

A new approach to solving Poisson system for free surface nonhydrostatic flow simulations

A nonhydrostatic finite volume model is presented to simulate free surface flow in a two‐dimensional vertical plane. The algorithm is based on a projection method including the solution of the pressure Poisson equation (PPE). The model is developed in a Cartesian grid in which the size of all the cells in the computational domain, excluding those of the top layer, is constant in time. To simulate the variable water surface, the heights of the top layer cells are variable and proportional to the local water elevation. Taking the layout of the grid system into consideration, a new method is proposed to solve the PPE derived in Cartesian coordinates. In this method, the system of pressure equations is divided into two subsystems, namely a subsystem for the upper layer cells and another for the remaining cells. The coefficient matrix of the former is variable with respect to time, whereas that of the latter remains constant. Therefore, the coefficient matrix of the latter subsystem can be inversed once and saved throughout the simulation. The application of this procedure reduces the computational cost compared with other PPE solvers in certain conditions. The model is applied to simulate a series of numerical tests including strong vertical accelerations and is verified against analytical and experimental results, demonstrating satisfactory performance. Copyright © 2011 John Wiley & Sons, Ltd.     

Depth‐integrated free‐surface flow with a two‐layer non‐hydrostatic formulation

This paper presents the derivation of a depth‐integrated wave propagation and runup model from a system of governing equations for two‐layer non‐hydrostatic flows. The governing equations are transformed into an equivalent, depth‐integrated system, which separately describes the flux‐dominated and dispersion‐dominated processes. The depth‐integrated system reproduces the linear dispersion relation within a 5 error for water depth parameter up to kd = 11, while allowing direct implementation of a momentum conservation scheme to model wave breaking and a moving‐waterline technique for runup calculation. A staggered finite‐difference scheme discretizes the governing equations in the horizontal dimension and the Keller box scheme reconstructs the non‐hydrostatic terms in the vertical direction. An semi‐implicit scheme integrates the depth‐integrated flow in time with the non‐hydrostatic pressure determined from a Poisson‐type equation. The model is verified with solitary wave propagation in a channel of uniform depth and validated with previous laboratory experiments for wave transformation over a submerged bar, a plane beach, and fringing reefs. Copyright © 2011 John Wiley & Sons, Ltd.