Synthesis and characterization of α‐butyl‐ω‐N,N‐dihydroxyethylaminopropylpolydimethylsiloxane

α‐Butyl‐ω‐N,N‐dihydroxyethylaminopropylpolydimethylsiloxane, a monotelechelic polydimethylsiloxane with a diol‐end group, which is used to prepare polyurethane–polysiloxane graft polymer, was successfully synthesized. The preparation included five steps, which are hydroxyl protection, alkylation, anionic ring‐opening polymerization, hydrosilylation, and deprotection. The products were characterized by FTIR, GC, LC‐MS, ¹H NMR, and elemental analysis. The results showed that each step was successfully carried out and the targeted products were synthesized in all cases. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Novel and Mild Route to Phthalocyanines and 3‐Iminoisoindolin‐1‐ones via N,N‐Diethylhydroxylamine‐Promoted Conversion of Phthalonitriles and a Dramatic Solvent‐Dependence of the Reaction

Refluxing a mixture of phthalonitrile C₆R¹R²R³R⁴(CN)₂ 1 (R¹–R⁴=H), or its substituted derivatives 2 (R¹, R³, R⁴=H, R²=Me), or 3 (R¹, R⁴=H, R², R³=Cl) (1 equiv.) and N,N‐diethylhydroxylamine, Et₂NOH, (4 equivs.) in methanol for 4 h results ( Route A ) in precipitation of the symmetrical ( 6 and 8 ) and an isomeric mixture of unsymmetrical ( 7 ) phthalocyanines, isolated in good (55–65 %) yields. The reaction of phthalonitriles 1 , 2 , or 4 (R¹, R³, R⁴=H, R²=NO₂) (4 equivs.) with Et₂NOH (8 equivs.) in the presence of a metal salt MCl₂ (M=Zn, Cd, Co, Ni) (1 equiv.) in n‐BuOH or without solvent results in the formation of metallated phthalocyanine species ( 9 – 17 ). Upon refluxing in freshly distilled dry chloroform, phthalonitrile 1 or its substituted analogues 2 , 3 or 5 (R¹–R⁴=F) (1 equiv.) react with N,N‐diethylhydroxylamine (2 equivs.) affording 3‐iminoisoindolin‐1‐ones 18 – 21 ( Route B ) isolated in good yields (55–80 %). All the prepared compounds were characterized with C, H, and N elemental analyses, ESI‐MS, IR, and compounds 18 – 21 also by 1D (¹H, ¹³C{¹H}), and 2D (¹H,¹⁵N‐HMBC and ¹H,¹³C‐HMQC, ¹H,¹³C‐HMBC) NMR spectroscopy.     

Homogeneous graft copolymerization of chitosan with butyl acrylate by γ‐irradiation via a 6‐O‐maleoyl‐N‐phthaloyl‐chitosan intermediate

The graft copolymerization of butyl acrylate (BA) onto chitosan was tried via a new protection‐graft‐deprotection procedure. About 6‐O‐maleoyl‐N‐phthaloyl‐chitosan was synthesized and characterized by Fourier transform infrared spectra analysis (FT‐IR) and ¹H‐NMR. Because the intermediate 6‐O‐maleoyl‐N‐phthaloyl‐chitosan was soluble in organic solvents, the graft copolymerization was carried out in a homogeneous system. Grafting was initiated by γ‐irradiation. The graft extent was dependent on the irradiation dose and the concentration of BA monomer, and copolymers with grafting above 100% were readily prepared. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 489–493, 2006     

Characterization of 4,6‐Diazido‐N‐nitro‐1,3,5‐triazine‐2‐amine

4,6‐Diazido‐N‐nitro‐1,3,5‐triazine‐2‐amine (DANT) was prepared with a 35 % yield from cyanuric chloride in a three step process. DANT was characterized by IR and NMR spectroscopy (¹H, ¹³C, ¹⁵N), single‐crystal X‐ray diffraction, and DTA. The crystal density of DANT is 1.849 g cm⁻³. The cyclization of one azido group and one nitrogen atom of the triazine group giving tetrazole was observed for DANT in a dimethyl sulfoxide solution using NMR spectroscopy. An equilibrium exists between the original DANT molecule and its cyclic form at a ratio of 7 : 3. The sensitivity of DANT to impact is between that for PETN and RDX, sensitivity to friction is between that for lead azide and PETN, and sensitivity to electric discharge is about the same as for PETN. DANT′s heat of combustion is 2060 kJ mol⁻¹.     

Synthesis and characterization of α‐amino acid‐containing polyester: poly[(ε‐caprolactone)‐co‐(serine lactone)]

Novel polyesters, poly[(ε‐caprolactone)‐co‐(N‐trityl‐L ‐serine‐β‐lactone)]s, were prepared by copolymerizing ε‐caprolactone (CL) with N‐trityl‐L ‐serine‐β‐lactone (TSL) using ZnEt₂ as the catalyst. The number‐average molecular weights were determined which ranged from 2.7 × 10⁴ to 4.9 × 10⁴ Da with dispersity values ranging from 1.6 to 1.8. The structures of the copolymers were investigated by means of ¹H NMR, ¹³C NMR and infrared spectroscopies, thermogravimetric analysis and differential scanning calorimetry. The results indicated that CL and TSL monomer units were randomly distributed within the copolymer backbone structures and the ratios of TSL to CL in the copolymers were close to those in the feeds. After removal of the trityl group under mild condition, a new polyester with side amino groups provided by serine units was obtained. L929 cell culturing test indicated good biocompatibility of the polyester with or without protective groups. © 2012 Society of Chemical Industry     

Novel heterocyclic synthesis and investigation on radiation‐grafted low‐density polyethylene with 2‐N‐vinylpyrrolidone

Radiation‐induced graft polymerization of low‐density polyethylene with N‐vinylpyrrolidone, LDPE‐g‐PNVP, was used as a starting material for the synthesis of polyfunctionally substituted heterocyclic products. Thus, LDPE‐g‐PNVP reacts with ylidenemalononitrile derivatives to give the Michael addition products. In multistep reaction, LDPE‐g‐PNVP reacts with N,N‐dimethylformamide dimethyl acetal (DMFDMA), hydrazine hydrate and malononitrile, respectively, to give a hydropyrrolopyridazine derivative. The latter could also be prepared via the reaction of LDPE‐g‐PNVP with DMFDMA, followed by treating with cyanoacetohydrazide. Also, LDPE‐g‐PNVP reacts with malononitrile to give an adduct product, dimer malononitrile derivative 13. The latter reacts with sulfur element to afford the thiophene derivative. Furthermore, this adduct reacts with hydrazine hydrate to isolate the original starting material, LDPE‐g‐PNVP, and aminopyridine derivative. The resulted films were characterized by infrared (IR) spectroscopy, ¹H nuclear magnetic resonance (¹H‐NMR) mass spectroscopy, elemental analysis, swelling behavior, and electron scanning microscope. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2963–2970, 1999     

Synthesis and characterization of degradable copoly(ester–amide)s: Poly(trans‐4‐hydroxy‐L‐proline‐co‐ε‐caprolactam)

Novel copolyesteramides were synthesized by reacting trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L ‐proline (N‐CBz‐Hpr) with ε‐caprolactam (CLM) in the presence of stannous octoate [Sn(II) Oct.] as a catalyst. Various techniques, including ¹H‐NMR, IR, DSC, and viscosity, were used to elucidate structural characteristics and thermal properties of the resulting copolymers. Data showed that the optimal reaction condition for the synthesis of the copolymers was obtained by using 3 wt % Sn(II) Oct. at 170°C for 24 h. The DSC analysis demonstrated amorphous structure for most of the copolymers. The glass‐transition temperature of the copolymers shifts to a higher temperature with increasing Hpr/CLM molar ratio. In vitro degradation of these poly(N‐CBz‐Hpr‐co‐CLM)s was evaluated by weight loss measurements. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1615–1621, 2002     

Synthesis and properties of novel polyimides from 3‐(4‐aminophenylthio)‐N‐aminophthalimide

A novel, asymmetric diamine, 3‐(4‐aminophenylthio)‐N‐aminophthalimide, was prepared from 3‐chloro‐N‐aminophthalimide and 4‐aminobenzenethiol. The structure of the diamine was determined via IR and ¹H‐NMR spectroscopy and elemental analysis. A series of polyimides were synthesized from 3‐(4‐aminophenylthio)‐N‐aminophthalimide and aromatic dianhydrides by a conventional two‐step method in N,N‐dimethylacetamide and by a one‐step method in phenols. These polyimides showed good solubility in 1‐methyl‐2‐pyrrolidinone, m‐cresol, and p‐chlorophenol, except polyimide from pyromellitic dianhydride, which was only soluble in p‐chlorophenol. The 5% weight loss temperatures of these polyimides ranged from 460 to 498°C in air. Dynamic mechanical thermal analysis indicated that the glass‐transition temperatures of the polyimides were in the range 278–395°C. The tensile strengths at break, moduli, and elongations of these polyimides were 146–178 MPa, 1.95–2.58 GPa, and 9.1–13.3%, respectively. Compared with corresponding polyimides from 4,4′‐diamiodiphenyl ether, these polymers showed enhanced solubility and higher glass‐transition temperatures. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Sequencing of N‐vinyl‐2‐pyrrolidone/glycidyl methacrylate copolymers by one‐dimensional and two‐dimensional nuclear magnetic resonance spectroscopy

Copolymers of N‐vinyl‐2‐pyrrolidone (V) and glycidyl methacrylate (G) monomers of different compositions were prepared by free‐radical solution polymerization. The copolymer composition of these copolymers was determined with ¹H‐NMR spectra. The reactivity ratios calculated from the Kelen–Tudos and nonlinear least‐square error‐in‐variable methods were r_V = 0.03 ± 0.01 and r_G = 5.05 ± 0.84 and r_V = 0.02 and r_G = 4.72, respectively. The triad sequence distribution in terms of V and G centered triads was determined from ¹³C{¹H}‐NMR spectroscopy. The complete spectral assignment of ¹³C{¹H}‐ and ¹H‐NMR spectra was performed with the help of distortionless enhancement by polarization transfer and two‐dimensional ¹³C–¹H heteronuclear single quantum coherence. The ¹H–¹H couplings were explained with total correlation spectroscopy and nuclear Overhauser enhancement spectroscopy spectra. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 50–60, 2002; DOI 10.1002/app.10186     

Synthesis and property studies of N‐carboxymethyl chitosan

N‐carboxymethyl chitosans (N‐CMC) were synthesized from chitosan in water with chloroacetic acid instead of comparatively expensive glyoxylic acid. The optimal reaction conditions were 90°C and 4 h with a ratio of chloroacetic acid to chitosan 5 : 1(w/w). The degree of substitution of product exceeded 1.32. The N‐carboxymethyl chitosans were characterized by XRD, FTIR, ¹H‐NMR, and the water solubility and isoelectric point of N‐CMC with different degrees of substitution were determined. FTIR and ¹H‐NMR data has confirmed that the substitution reaction occurred on the amino groups. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Ionic polymers with expanded π‐conjugation systems derived from through‐space interaction in piperazinium and homopiperazinium rings

Reactions of N‐(2,4‐dinitrophenyl)‐4‐arylpyridinium chlorides (aryl (Ar) = phenyl and 4‐biphenyl) with piperazine or homopiperazine caused opening of the pyridinium ring and yielded polymers that consisted of 5‐piperazinium‐3‐arylpenta‐2,4‐dienylideneammonium chloride (? N(CH₂CH₂)₂N⁺ (Cl^?)?CH? CH?C(Ar)? CH?CH? ) or 5‐homopiperazinium‐3‐arylpenta‐2,4‐dienylideneammonium chloride (? N(CH₂CH₂CH₂)(CH₂CH₂)N⁺ (Cl^?)?CH? CH?C(Ar)? CH?CH? ) units. ¹H NMR spectral analysis suggested that the π‐electrons of the penta‐2,4‐dienylideneammonium group of the polymers were delocalized. UV‐visible spectral measurements revealed that the π‐conjugation system expanded along the polymer chains because of the orbital interaction between electrons of the two nitrogen atoms of the piperazinium and homopiperazinium rings. However, the π‐conjugation length depended on the distance between the two nitrogen atoms; that is, the polymers containing the piperazinium ring had a longer π‐conjugation length than those containing the homopiperazinium ring. Conversion of the piperazinium and homopiperazinium rings from the boat to the chair form led to a decrease in the π‐conjugation length. The surface of pellets that were molded from the polymers exhibited metallic luster, and these polymers underwent electrochemical oxidation in solution. Copyright © 2010 Society of Chemical Industry     

Copolymerization of N‐(4‐carboxyphenyl) itaconimide or N‐(4‐carboxyphenyl) itaconamic acid with methyl methacrylate

This paper describes the synthesis and characterization of N‐(4‐carboxyphenyl) itaconamic acid (CPA) and N‐(4‐carboxyphenyl) itaconimide (CPI) obtained by reacting itaconic anhydride with p‐aminobenzoic acid. Structural and thermal characterization of CPA and CPI was done using ¹H‐NMR, FTIR, and differential scanning calorimetry (DSC). Copolymerization of CPA or CPI with methyl methacrylate (MMA) in solution was carried out at 60 °C using azobisisobutyronitrile as an initiator and dimethyl acetamide or THF as solvent. Feed compositions having varying mole fractions of CPA or CPI ranging from 0.05–0.20 or 0.1–0.5 were taken to prepare copolymers. Copolymerizations were terminated at low percentage conversion. Structural characterization of copolymers was done by ¹H‐NMR and elemental analysis. Copolymer composition was determined using percentage nitrogen content. The reactivity ratios were r₁ (MMA) = 0.68 ± 0.06 and r₂ (CPI) = 0.46 ± 0.06. The intrinsic viscosity [η] was determined using an Ubbelohde suspension level viscometer. [η] decreased with increasing mole fraction of N‐(p‐carboxyphenyl) itaconimide or N‐(p‐carboxyphenyl) itaconamic acid in copolymers. Glass transition temperature and thermal stability of the copolymers were determined using DSC and thermogravimetric analysis, respectively. The glass transition temperature (T_g) as determined from DSC scans increased with increasing amounts of CPA or CPI in copolymers. A significant improvement in the char yield was observed upon copolymerization. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1909–1915, 2005     

Synthesis and characterization of poly(N‐isopropylacrylamide)s initiated with siloxane oligomer–(NH4)2Ce(NO3)6 redox pair

Poly(N‐isopropylacrylamide)s (PNIPAAM)s were synthesized via free‐radical polymerization using a ceric ammonium nitrate, Ce(IV)–α‐ω‐dihydroxy(polydimethylsiloxane) (Tegomer H‐Si 2111, PDMS) redox pair in hexane at 30°C in a nitrogen atmosphere. The dependence of the initiation and termination steps on the [NIPAAM]/[Ce(IV)] and [NIPAAM]/[PDMS] ratios were studied using gravimetry and FTIR, ¹H‐NMR, UV‐vis, and GFAA spectroscopy techniques. Gravimetric results indicated that, in the case of high concentrations of PDMS, the percentage of the solid portions of the products decreased while the amount of the oligomeric NIPAAM chains increased, that is, as the amount of PDMS in hexane was increased, the number of the short NIPAAM chains having PDMS segments at the two ends, also increased. UV‐vis results showed that the LCST of PNIPAAM initiated with Ce(IV) alone was higher than those of the ones that were synthesized using common initiator systems such as an ammonium persulfate–N,N,N′,N′‐tetramethylethylenediamine redox pair and azobis(isobutyronitrile). Further, it was observed that both siloxane blocks and ? NH? groups forming coordination bonds with free Ce(IV) ions and/or metal–ligand complexes had an important effect on the aggregation process of the chains. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1248–1254, 2003     

Microstructure analysis of N‐vinyl‐2‐pyrrolidone/vinyl acetate copolymers by NMR spectroscopy

N‐Vinyl‐2‐pyrrolidone (V) and vinyl acetate (A) copolymers of different compositions were synthesized by free radical bulk polymerization. The copolymer composition of these copolymers was determined using quantitative ¹³C{¹H} NMR spectra. The reactivity ratios for these comonomers were determined using the Kelen–Tudos (KT) and non‐linear least‐square error‐in‐variable (EVM) methods. The reactivity ratios calculated from the KT and EVM methods are r_V = 2.86 ± 0.16, r_A = 0.36 ± 0.09 and r_V = 2.56, r_A = 0.33, respectively. ¹H, ¹³C{¹H} and ¹H–¹³C heteronuclear shift correlation spectroscopy (HSQC) and ¹H–¹H homonuclear total correlation spectroscopy (TOCSY) were used for the compositional and configurational assignments of V/A copolymers. The ¹³C distortionless enhancement by polarization transfer (DEPT) technique was used to resolve the methine, methylene and methyl resonance signals in the V/A copolymers. © 2002 Society of Chemical Industry     

Plasma‐induced,solid‐state polymerization of N‐isopropylacrylamide

The radio‐frequency plasma‐initiated polymerization of N‐isopropylacrylamide (NIPAM) in the solid state was performed. The isolated linear polymer was characterized by ¹³C‐NMR, ¹H‐NMR, and Fourier transform infrared spectroscopy, and the effects of selected operational plasma parameters (discharge power and time) on the conversion rates were studied. Reversible transitions at the volume‐phase‐transition temperatures of the swelled poly(N‐isopropylacrylamide) hydrogels were investigated by differential scanning calorimetry. The surface morphologies before and after plasma treatment were followed by scanning electron microscopy. With the obtained X‐ray diffraction results, we propose a solid‐state plasma polymerization mechanism for the NIPAM. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Study of the synthesis of chitosan derivatives containing benzo‐21‐crown‐7 and their adsorption properties for metal ions

Three new chitosan crown ethers, N‐Schiff base‐type chitosan crown ethers (I, III), and N‐secondary amino type chitosan crown ether (II) were prepared. N‐Schiff base‐type chitosan crown ethers (I, III) were synthesized by the reaction of 4′‐formylbenzo‐21‐crown‐7 with chitosan or crosslinked chitosan. N‐Secondary amino type chitosan‐crown ether (II) was prepared through the reaction of N‐Schiff base type chitosan crown ether (I) with sodium brohydride. Their structures were characterized by elemental analysis, infrared spectra analysis, X‐ray diffraction analysis, and solid‐state ¹³C NMR analysis. In the infrared spectra, characteristic peaks of C?N stretch vibration appeared at 1636 cm^?1 for I and 1652 cm^?1 for II; characteristic peaks of N? H stretch vibration appeared at 1570 cm^?1 in II. The X‐ray diffraction analysis showed that the peaks at 2θ = 10° and 28° disappeared in chitosan derivatives I and III, respectively; the peak at 2θ = 10° disappeared and the peak at 2θ = 28° decreased in chitosan‐crown ether II; and the peak at 2θ = 20° decreased in all chitosan derivatives. In the solid‐state ¹³C NMR, characteristic aromatic carbon appeared at 129 ppm in all chitosan derivatives, and the characteristic peaks of carbon in C?N groups appeared at 151 ppm in chitosan crown ethers I and III. The adsorption and selectivity properties of I, II, and III for Pd²⁺, Au³⁺, Pt⁴⁺, Ag⁺, Cu²⁺, and Hg²⁺ were studied. Experimental results showed these adsorbents not only had good adsorption capacities for noble metal ions Pd²⁺, Au³⁺, Pt⁴⁺, and Ag⁺, but also high selectivity for the adsorption of Pd²⁺ with the coexistence of Cu²⁺ and Hg²⁺. Chitosan‐crown ether II only adsorbs Hg²⁺ and does not adsorbs Cu²⁺ in an aqueous system containing Pd²⁺, Cu²⁺, and Hg²⁺. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1886–1891, 2002     

Synthesis,Crystal Structure,and Thermal Behaviors of 3‐Nitro‐1,5‐bis(4,4′‐dimethylazide)‐1,2,3‐triazolyl‐3‐azapentane (NDTAP)

The energetic material, 3‐nitro‐1,5‐bis(4,4′‐dimethyl azide)‐1,2,3‐triazolyl‐3‐azapentane (NDTAP), was firstly synthesized by means of Click Chemistry using 1,5‐diazido‐3‐nitrazapentane as main material. The structure of NDTAP was confirmed by IR, ¹H NMR, and ¹³C NMR spectroscopy; mass spectrometry, and elemental analysis. The crystal structure of NDTAP was determined by X‐ray diffraction. It belongs to monoclinic system, space group C2/c with crystal parameters a=1.7285(8) nm, b=0.6061(3) nm, c=1.6712(8) nm, β=104.846(8)°, V=1.6924(13) nm³, Z=8, μ=0.109 mm⁻¹, F(000)=752, and D_c=1.422 g cm⁻³. The thermal behavior and non‐isothermal decomposition kinetics of NDTAP were studied with DSC and TG‐DTG methods. The self‐accelerating decomposition temperature and critical temperature of thermal explosion are 195.5 and 208.2 °C, respectively. NDTAP presents good thermal stability and is insensitive.     

Synthesis,characterization and thermal degradation of poly[2‐(3‐p‐bromophenyl‐3‐methylcyclobutyl)‐2‐hydroxyethylmethacrylate]

In this work, 2‐(3‐p‐bromophenyl‐3‐methylcyclobutyl)‐2‐hydroxyethylmethacrylate (BPHEMA) [monomer] was synthesized by the addition of methacrylic acid to 1‐epoxyethyl‐3‐bromophenyl‐3‐methyl cyclobutane. The monomer and poly(BPHEMA) were characterized by FT‐IR and [¹H] and [¹³C]NMR. Average molecular weight, glass transition temperature, solubility parameter, and density of the polymer were also determined. Thermal degradation of poly[BPHEMA] was studied by thermogravimetry (TG), FT‐IR. Programmed heating was carried out at 10 °C min⁻¹ from room temperature to 500 °C. The partially degraded polymer was examined by FT‐IR spectroscopy. The degradation products were identified by using FT‐IR, [¹H] and [¹³C]NMR and GC‐MS techniques. Depolymerization is the main reaction in thermal degradation of the polymer up to about 300 °C. Percentage of the monomer in CRF (Cold Ring Fraction) was estimated at 33% in the peak area of the GC curve. Intramolecular cyclization and cyclic anhydride type structures were observed at temperatures above 300 °C. The liquid products of the degradation, formation of anhydride ring structures and mechanism of degradation are discussed. © 1999 Society of Chemical Industry     

4‐Acetamidophenyl acrylate copolymers with acrylonitrile and N‐vinyl‐2‐pyrrolidone: Synthesis,characterization, and reactivity ratios

4‐Acetamidophenyl acrylate (APA) was synthesized and characterized by IR, ¹H and ¹³C NMR spectroscopies. Homo‐ and copolymers of APA with acrylonitrile (AN) and N‐vinyl‐2‐pyrrolidone (NVP) were prepared by a free radical polymerization. All the copolymer compositions have been determined by ¹H NMR technique, and the reactivity ratios of the monomer pairs have been evaluated using the linearization methods Fineman–Ross, Kelen–Tudos, and extended Kelen–Tudos. Nonlinear error‐in‐variable model (EVM) method was used to compare the reactivity ratios. The reactivity ratios for copoly(APA–AN) system were APA(r₁) = 0.70 and AN(r₂) = 0.333, and for copoly(APA–NVP) system the values were APA(r₁) = 4.99 and NVP(r₂) = 0.019. Thermal stability and molecular weights of the copolymers are reported. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1919–1927, 2006     

Synthesis and characterization of degradable copoly(trans‐4‐hydroxy‐L‐proline/ϵ‐caprolactone)

The melt polycondensation reaction of N‐protected trans‐4‐hydroxy‐L ‐proline (N‐Z‐Hpr) and ?‐caprolactone (?‐CL) over a wide range of molar fractions in the feed produced new and degradable poly(N‐Z‐Hpr‐co‐?‐CL)s with stannous octoate as a catalyst. The optimal reaction conditions for the synthesis of the copolymers were obtained with 1.5 wt % stannous octoate at 140°C for 24 h. The synthesized copolymers were characterized by IR spectrophotometry, ¹H NMR, differential scanning calorimetry, and Ubbelohde viscometry. The values of the inherent viscosity (η_inh) and glass‐transition temperature (T_g) of the copolymers depended on the molar fractions of N‐Z‐Hpr. With an increase in the trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L ‐proline (N‐CBz‐Hpr) feed from 10 to 90 mol %, a decrease in η_inh from 2.47 to 1.05 dL/g, and an increase in T_g from ?48 to 49°C were observed. The in vitro degradation of these poly(N‐CBz‐Hpr‐co‐?‐CL)s was evaluated from weight‐loss measurements. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 3176–3182, 2003