Reverse high-speed packet data physical layer enhancements in cdma2000 1/spl times/EV-DV

The rapid growth of Internet-based applications calls for design of a high-speed wireless packet data communication system. This anticipated increase in future mobile wireless packet data services has challenged the current 3G standardization bodies to respond with evolved 3G system specifications capable of providing increased data throughput. In response to such a need, 3GPP2 recently completed the enhanced reverse link standardization effort of the CDMA technology flagship, cdma2000/spl reg/ by completing the definition of the 1/spl times/EV-DV 1/spl times/ system. 1/spl times/EV-DV achieves higher data throughput while simultaneously providing coexisting and backward-compatible voice services within the same spectrum. This feature of 1/spl times/EV-DV allows wireless operators to manage the voice and data loading in their system more efficiently. This article describes the physical layer reverse link enhancements in cdma2000 revision D that are necessary to support 1/spl times/EV-DV.     

Performance evaluation of high-speed packet enhancement on cdma2000 1/spl times/EV-DV

During the last few years, the cdma2000/spl reg/ cellular system has undergone a major enhancement within the 3rd Generation Partnership Project 2. The objective of this enhancement was to improve the bandwidth efficiency of the cdma2000 system by creating a new set of high-speed packet data channels, the forward packet data channel and the reverse packet data channel. This new set of high-speed packet data channels utilize technologies such as fast packet scheduling, hybrid automatic repeat request, and adaptive modulation and coding. This article discusses the performance evaluation aspect of the high-speed packet enhancement of cdma2000 revisions C and D, the so-called 1/spl times/EV-DV system. Insights into how the performance evaluations of cdma2000 revisions C and D were conducted, and the results of these evaluations are discussed.     

A dynamic resource allocation scheme for delay-constrained multimedia services in CDMA 1/spl times/EV-DV forward link

CDMA2000 1/spl times/EV-DV has been proposed as one of the global standards of third-generation (3G) networks, which adopts TDM/CDM and adaptive modulation and coding (AMC) techniques to enhance the data rate. The current CDMA2000 1/spl times/EV-DV standard specifies all possible combinations of system parameters, but there is no any further specification in the standard on how to dynamically change the system parameters to support the quality-of-service (QoS) requirements imposed by the upper-layer applications. In the meantime, one of the major deficiencies of previous research work done in this area is that they all are based on the channel models of physical layer such as Rayleigh model, which is unable to capture the link-layer QoS parameters such as queueing delay. Since the dynamic resource allocation usually resides in the data link layer, a wireless channel model at the link layer would be desirable to handle the QoS requirements. In this paper, we develop a dynamic resource allocation scheme using the effective capacity link model to support delay-bounded multimedia services in CDMA2000 1/spl times/EV-DV networks. Extensive simulations have been set up and the simulation results show that the proposed dynamic resource allocation scheme significantly improves the delay and throughput performance for all types of application traffic with various QoS requirements.     

A framework for elastic QoS provisioning in the cdma2000 1/spl times/EV-DV packet core network

With the fast proliferation of QoS-enabled wireless packet networks, the need for effective QoS control is increasing. In this article, we focus on QoS provisioning in the cdma2000 1/spl times/ evolution for high-speed integrated data and voice (1/spl times/EV-DV) packet core network. We investigate a dynamic bandwidth provisioning method that is able to increase a service provider's revenue. It is achieved by releasing unutilized bandwidth for use by other profitable services. The proposed method is implemented as an SNMP-compliant management information base and deployed at the packet data serving node. The experiments conducted on the LG Telecom 1/spl times/EV-DV testbed show that the method can increase the bandwidth for the conversational class and guarantee adequate service quality for the background class as well.     

Rreverse link high-speed packet data support in cdma2000 1/spl times/EV-DV: upper layer protocols

This article describes the design enhancements of the upper layers of the cdma2000/spl reg/ revision D standards [Mar. 2004] supporting high-speed wireless data on the 1/spl times/EV-DV reverse link. In revision D, the reverse link peak data rate has been increased by an order of magnitude from 153.6 kb/s to 1.8 Mb/s, and the reverse link sector throughput has been improved significantly (from about 280 kb/s to 600 kb/s). The key enabling mechanisms to achieve these enhancements include a hybrid automatic repeat request protocol, adaptive higher order modulation and coding schemes, and advanced radio resource management schemes. It is well known that the reverse link is interference limited, so the system resource of interest is reverse link interference. cdma2000 Revision D introduces a variety of flexible medium access control mechanisms to allocate appropriate reverse link resources for mobile stations with various service requirements. Moreover, cdma2000 revision D greatly enhances quality of service support for the reverse link.     

3G wireless and cdma2000 1/spl times/ evolution in Korea

The cdma2000/spl reg/ I/spl times/EV-DV system is designed to meet the ever-increasing demand for high-speed packet data transmission while providing the same level of revenue generated by conventional voice communications on existing cdma2000 1/spl times/ systems. It supports concurrent voice and high-speed data on a single cdma 1.25 MHz carrier, and offers improved flexibility for operators to manage data and voice services cost efficiently. However, the Korean market has proved that providing higher bandwidth to the user does not guarantee the success of mobile data service. Users tend not to use expensive mobile wireless data services such as video streaming, video on demand, and MP3 music download service that they feel do not provide enough justification for their costs. The problem LG Telecom faces now as a mobile operator is not only to evolve technologies that enable various services, but also to find a way to provide attractive services at reasonable prices. This article describes experiences in the wireless data market in Korea as well as the market needs and driving forces for cdma2000 1/spl times/EV-DV developments.     

Joint source-channel coding and power adaptation for energy efficient wireless video communications

We consider efficiently transmitting video over a hybrid wireless/wire-line network by optimally allocating resources across multiple protocol layers. Specifically, we present a framework of joint source-channel coding and power adaptation, where error resilient source coding, channel coding, and transmission power adaptation are jointly designed to optimize video quality given constraints on the total transmission energy and delay for each video frame. In particular, we consider the combination of two types of channel coding—inter-packet coding (at the transport layer) to provide protection against packet dropping in the wire-line network and intra-packet coding (at the link layer) to provide protection against bit errors in the wireless link. In both cases, we allow the coding rate to be adaptive to provide unequal error protection at both the packet and frame level. In addition to both types of channel coding, we also compensate for channel errors by adapting the transmission power used to send each packet. An efficient algorithm based on Lagrangian relaxation and the method of alternating variables is proposed to solve the resulting optimization problem. Simulation results are shown to illustrate the advantages of joint optimization across multiple layers.     

Estimation of the efficiency of bandwidth request piggybacking to data packets in the wireless network controlled by the IEEE 802.16 protocol

A data transmission process of the centralized wireless network controlled by IEEE 802.16 protocol, in which a set of subscriber stations utilizes the common channel to transmit data to the base station, is discussed. The developed analytical model makes it possible to investigate the efficiency of upstream traffic transmission, including channel reservation using the random multiple access algorithm and packet sending with allowance for bandwidth request piggybacking onto data. The analytical estimates of packet registration and service durations are presented.     

Power controlled H-ARQ in cdma2000 1/spl times/EV-DV

The newly applied H-ARQ technique in the reverse link of a cdma2000/spl reg/ 1/spl times/EV-DV system is shown to be similar in nature to the fast power control technique such that the two techniques both reduce interference to other users. In order to balance the H-ARQ gain and packet delay time, four modes of operation are defined: normal, reduction, boost, and boost reduction. The four modes are defined according to the way the channel gain is set for the H-ARQ operation. Simulation results show that the reduction modes have better performance in terms of both PER and packet delay time. It is also shown that the boost modes have lower PER and packet delay time than the non-boost modes, but at the expense of more energy.     

Fair scheduling in wireless packet networks

Fair scheduling of delay and rate-sensitive packet flows over a wireless channel is not addressed effectively by most contemporary wireline fair-scheduling algorithms because of two unique characteristics of wireless media: (1) bursty channel errors and (2) location-dependent channel capacity and errors. Besides, in packet cellular networks, the base station typically performs the task of packet scheduling for both downlink and uplink flows in a cell; however, a base station has only a limited knowledge of the arrival processes of uplink flows. We propose a new model for wireless fair-scheduling based on an adaptation of fluid fair queueing (FFQ) to handle location-dependent error bursts. We describe an ideal wireless fair-scheduling algorithm which provides a packetized implementation of the fluid mode, while assuming full knowledge of the current channel conditions. For this algorithm, we derive the worst-case throughput and delay bounds. Finally, we describe a practical wireless scheduling algorithm which approximates the ideal algorithm. Through simulations, we show that the algorithm achieves the desirable properties identified in the wireless FFQ model     

Common packet data channel (CPDC) for integrated wireless DS-CDMAnetworks

A common packet data channel (CPDC) architecture is proposed to support bursty, packet-based services in direct sequence code-division multiple-access (DS-CDMA) integrated wireless access networks. The architecture employs an asynchronous transfer mode (ATM) strategy in the forward CPDC link and a spread ALOHA-type random access strategy in the reverse CPDC link. A congestion control algorithm using base station broadcast and portable terminal random delay call reattempt is described. A performance analysis of the CPDC architecture and algorithms is carried out, and formulas for the bit error rate, blocking probability, system delay time, transmission time, and waiting time for packet data calls are derived. The interference caused by a CPDC to stream services in the network is determined, and the capacity of a CPDC is evaluated in terms of the number of packet data subscribers that can be served with a specified grade of service (GOS)     

Asymmetric physical layer design for high-speed wireless digitalcommunications

High data rates and portability are conflicting requirements in the design of reliable indoor wireless data communication systems. Asymmetric system design addresses this problem by exploiting the major differences in the availability of resources (i.e., energy, space) that exist between base stations and portable units. Such an approach seeks to concentrate most of the signal processing tasks involved in the operation of the two-way wireless link at the base station. This paper presents and discusses the implications of a set of techniques for asymmetric physical layer system design based on the use of channel precoding for forward transmission. System performance is assessed via simulations using a realistic time-varying channel model. Simplified two-way antenna diversity implemented exclusively at the base station and the key issue of automatic gain control at the receive side of the precoded link are also addressed and evaluated. Simulation results confirm that the adoption of these techniques enables reliable digital communication at a data rate of 20 Mbit/s on both links while significantly reducing the power consumption of the portable unit     

Roaming times of multi‐wireless systems for software defined radio

In this paper, we evaluate the roaming time performance for a reconfigurable multi‐mode mobile station (MS) that experiences possible transition from one kind of wireless system standard to another. In future software defined radio systems (SDR) (IEEE Commun Mag 2000; 138–143, IEE 1998; 1–6, IEEE 1999; 1212–1216, IEEE Commun Mag 1995; 33 ), reconfigurability of the MS is achieved by downloading the system configuration software code over the wireless channel. For evaluation of the roaming times, a generalized state diagram of the multi‐mode MS is presented. We focus on evaluating the times for sensing the universal pilot channel, classic base station pilot channel, association and connection establishment signaling are included. We investigate the effects of packet successful transmission probability over the wireless channel. We also consider the effects of the system resource blocking probability, MS resource blocking probability, and signaling bit rate over the universal base station channel for different cases and design scenarios. Such evaluations are important for prior design of SDR mobile terminal and universal base station in global roaming situations. We include some analysis results from many obtained. These show the feasibility of wireless software download, and switching between different wireless standard as the mobile station roams. Copyright © 2003 John Wiley & Sons, Ltd.     

Combining the rate adaptation and quality adaptation schemes for wireless video streaming

Video streaming service over wireless networks is a challenging task because of the changes in the wireless channel conditions that can occur due to interference, fading, and station mobility. Moreover, the IEEE 802.11 WLAN standard does not contain any specifications for the rate adaptation scheme which are useful for improving the wireless link utilization. To provide efficient wireless video streaming service, the rate adaptation scheme should be applied at the low layer and the quality adaptation scheme should be considered at the high layer. To meet this requirement of wireless video streaming, we propose a new cross-layer design for video streaming over wireless networks. This design includes the rate adaptation scheme in the data link and physical layers and the quality adaptation scheme in the application layer. The rate adaptation scheme adjusts the data transmission rate based on the measured RSSI at the sender-side and informs the quality adaptation scheme about the rate limits. Then the quality adaptation scheme utilizes this rate limits to adjust the quality of the video stream. Through performance evaluations, we prove that our cross-layer design improves the wireless link utilization and the quality of the video stream simultaneously.     

A new adaptive MAC layer protocol for broadband packet wirelessnetworks in harsh fading and interference environments

A new medium-access protocol is proposed for sharing a high-speed radio channel among a number of small wireless packet-access units, some of which may be stationary and some of which may be within moving vehicles. Such a system could provide fixed-point pedestrian and remote users with wireless access to CPU and database resources of an underlying asynchronous transfer mode (ATM) wireline network, essentially extending the ATM bandwidth-upon-demand interface directly to the wireless units and enabling delivery of multimedia services (albeit at the lower peak rate afforded by the radio channel). A primary goal of the proposed medium-access protocol is the pre-delivery of a signal from each packet-access unit as needed to rapidly compute the weights needed by a base station's adaptive array processor or a space-time processor, thereby protecting the packet flow in each direction from the effects of both multipath propagation and adjacent channel interference arising in neighboring radio cells. An impairment-robust direct sequence spread-spectrum-based polling signal is invoked to stimulate a pilot tone from a given remote immediately prior to packet transfer in either direction, thereby permitting the base station to determine a good set of antenna element combining or power splitting weights to be used for that packet. Reasonable approximations are invoked to study the performance of the proposed protocol and the link utilization efficiency and average message delay are found. By proper choice of protocol parameters, a radio resource utilization efficiency of about 95% is readily achieved. The accuracy of the approximations is confirmed by extensive computer simulations     

Empirical evaluation of receiver‐based TCP delay control in CDMA2000 networks

Wide‐area broadband wireless technologies such as CDMA2000 often suffer from variable transfer rate and long latency. In particular, TCP window‐based rate control causes excessive buffering at the base station because of the lower transfer rate of the wireless link than that of the wired backhaul link. This performance characteristic of TCP further increases the end‐to‐end delay, and additional resources are required at the base station. This paper presents a practical mechanism to control the end‐to‐end TCP delay for CDMA2000 networks (or other similar wireless technologies). The key idea is to reduce and stabilize RTT (round‐trip time) by dynamically controlling the TCP advertised window size, based on a runtime measurement of the wireless channel condition at the mobile station. The proposed system has been implemented by modifying the Linux protocol stack. The experiment results, conducted on a commercial CDMA2000 1x network, show that the proposed scheme greatly reduces the TCP delay in non‐congested networks, while not sacrificing the TCP throughput in congested networks. Copyright © 2006 John Wiley & Sons, Ltd.     

Rate control for streaming video over wireless

Rate control is an important issue in video streaming applications for both wired and wireless networks. A widely accepted rate control method in wired networks is TCP-friendly rate control (TFRC) (Floyd, 2000). It is equation-based rate control in which the TCP-friendly rate is determined as a function of packet loss rate, round-trip time, and packet size. TFRC assumes that packet loss in wired networks is primarily due to congestion, and as such is not applicable to wireless networks in which the main cause of packet loss is at the physical layer. In this article we review existing approaches to solve this problem. Then we propose multiple TFRC connections as an end-to-end rate control solution for wireless video streaming. We show that this approach not only avoids modifications to the network infrastructure or network protocol, but also results in full utilization of the wireless channel. NS-2 simulations, actual experiments over a 1/spl times/RTT CDMA wireless data network, and video streaming simulations using traces from the actual experiments are carried out to characterize the performance and show the efficiency of our proposed approach.     

Per-packet rate adaptation for wireless video

Streaming video over error-prone wireless channels is a challenge as the dynamic network conditions and slow adaptation to channel degradations may affect the quality of the streamed video. Unequal error protection (UEP) can potentially address this issue by considering the importance of each video packet and its impact on the quality of reconstructed video. This paper proposes a cross-layer UEP solution for wireless video streaming over IEEE 802.11 networks. Video packets are prioritized based on the relative importance of the video packet. UEP is achieved by adapting the link layer parameters on a per-packet basis, using inherent forward error correction and adaptive modulation capabilities of the 802.11n network. Experimental results revealed that the proposed solution achieves comparable performance to the state-of-the-art methods at a lower complexity.     

CDMA2000 1X无线上网数据业务的特点

主要介绍了CDMA2000 1X无线上网数据业务的特点。首先介绍了基于移动IP技术的CDMA2000 1X数据业务的通信协议栈,包括移动台与基站接口之间分层协议结构,接着详细分析了物理层的特点、链路接入控制子层（LAC）的RLP协议以及传输层的PPP协议;然后给出CDMA2000 1X无线上网过程中的状态转化,分析无线上网过程中基本信道和补充信道的建立和释放;最后对无线上网过程中的相关信令进行了分析。