Characterization,Quantification, and Determination of the Toxicity of Iron Oxide Nanoparticles to the Bone Marrow Cells

Iron oxide nanoparticles (IONPs) have been used to develop iron supplements for improving the bioavailability of iron in patients with iron deficiency, which is one of the most serious nutritional deficiencies in the world. Accurate information about the characteristics, concentration, and cytotoxicity of IONPs to the developmental and reproductive cells enables safe use of IONPs in the supplement industry. The objective of this study was to analyze the physicochemical properties and cytotoxicity of IONPs in bone marrow cells. We prepared three different types of iron samples (surface-modified iron oxide nanoparticles (SMNPs), IONPs, and iron citrate) and analyzed their physicochemical properties such as particle size distribution, zeta potential, and morphology. In addition, we examined the cytotoxicity of the IONPs in various kinds of bone marrow cells. We analyzed particle size distribution, zeta potential, iron levels, and subcellular localization of the iron samples in bone marrow cells. Our results showed that the iron samples were not cytotoxic to the bone marrow cells and did not affect the expression of cell surface markers and lipopolysaccharide (LPS)-induced the secretion of cytokines by murine bone marrow-derived dendritic cells (BMDCs). Our results may be used to investigate the interactions between nanoparticles and cells and tissues and the developmental toxicity of nanoparticles.     

Optimizing the Antibacterial Activity of Iron Oxide Nanoparticles Using Central Composite Design

This work aims to optimize the antibacterial activity of iron oxide nanoparticles (IONPs) against both Gram-positive and Gram-negative bacteria. IONPs were greenly biosynthesized using Moringa oleifera leaves extract, and surface methodology (RSM) based on central composite design (CCD) was employed to investigate the combined effect of various experimental factors on the antibacterial activity of IONPs. The reaction and annealing temperatures besides precursor concentration were set as independent variables, while the antibacterial activity was set as a response to obtain the optimal conditions that maximizes IONPs antibacterial activity. Different characterization techniques such as UV–Vis, FTIR, XRD, SEM, and EDX were employed to study the properties of the biosynthesized nanoparticles. Meanwhile, the antibacterial activity was tested using the disk diffusion method. The characterizations results have confirmed the biosynthesis of Hematite (α-Fe₂O₃) nanoparticles of rhombohedral structure. The generated model has exhibited predicted values very close to the actual proving its validity to analyze and optimize the studied process. The model indicated that all the investigated parameters and their interactions have significantly affected IONPs antibacterial activity. An optimal antibacterial activity was achieved when biosynthesis factors at their lower levels (? 1). Furthermore, the effect of IONPs size on the antibacterial activity was studied and the results shown that the latter is significantly related to the nanoparticles size.

Graphical Abstract

     

Enhanced hydrophilic polysulfone hollow fiber membranes with addition of iron oxide nanoparticles

Membranes are at the heart of hemodialysis treatment functions to remove excess metabolic waste such as urea. However, membranes made up of pure polymers and hydrophilic polymers such as polyvinylpyrrolidone suffer problems of low flux and bio‐incompatibility. Hence, this study aimed to improve polysulfone (PSf ) membrane surface properties by the addition of iron oxide nanoparticles (IONPs ). The membrane surface properties and separation performance of neat PSf membrane and membrane filled with IONPs at a loading of 0.2 wt% were investigated and compared. The membranes were characterized in terms of morphology, pure water permeability (PWP ) and protein rejection using bovine serum albumin (BSA ). A decrease in contact angle value from 66.62° to 46.23° for the PSf /IONPs membrane indicated an increase in surface hydrophilicity that caused positive effects on the PWP and BSA rejection of the membrane. The PWP increased by 40.74% to 57.04 L m^?2 h^?1 bar^?1 when IONPs were incorporated due to the improved interaction with water molecules. Furthermore, the PSf /IONPs membrane rejected 96.43% of BSA as compared to only 91.14% by the neat PSf membrane. Hence, the incorporation of IONPs enhanced the PSf hollow fiber membrane hydrophilicity and consequently improved the separation performance of the membrane for hemodialysis application. © 2017 Society of Chemical Industry     

Iron Oxide and Titanium Dioxide Nanoparticle Effects on Plant Performance and Root Associated Microbes

In this study, we investigated the effect of positively and negatively charged Fe₃O₄ and TiO₂ nanoparticles (NPs) on the growth of soybean plants (Glycine max.) and their root associated soil microbes. Soybean plants were grown in a greenhouse for six weeks after application of different amounts of NPs, and plant growth and nutrient content were examined. Roots were analyzed for colonization by arbuscular mycorrhizal (AM) fungi and nodule-forming nitrogen fixing bacteria using DNA-based techniques. We found that plant growth was significantly lower with the application of TiO₂ as compared to Fe₃O₄ NPs. The leaf carbon was also marginally significant lower in plants treated with TiO₂ NPs; however, leaf phosphorus was reduced in plants treated with Fe₃O₄. We found no effects of NP type, concentration, or charge on the community structure of either rhizobia or AM fungi colonizing plant roots. However, the charge of the Fe₃O₄ NPs affected both colonization of the root system by rhizobia as well as leaf phosphorus content. Our results indicate that the type of NP can affect plant growth and nutrient content in an agriculturally important crop species, and that the charge of these particles influences the colonization of the root system by nitrogen-fixing bacteria.     

Efficient Agrobacterium-Mediated Transformation of Hybrid Poplar Populus davidiana Dode × Populus bollena Lauche

Poplar is a model organism for high in vitro regeneration in woody plants. We have chosen a hybrid poplar Populus davidiana Dode × Populus bollena Lauche. By optimizing the Murashige and Skoog medium with (0.3 mg/L) 6-benzylaminopurine and (0.08 mg/L) naphthaleneacetic acid, we have achieved the highest frequency (90%) for shoot regeneration from poplar leaves. It was also important to improve the transformation efficiency of poplar for genetic breeding and other applications. In this study, we found a significant improvement of the transformation frequency by controlling the leaf age. Transformation efficiency was enhanced by optimizing the Agrobacterium concentration (OD₆₀₀ = 0.8–1.0) and an infection time (20–30 min). According to transmission electron microscopy observations, there were more Agrobacterium invasions in the 30-day-old leaf explants than in 60-day-old and 90-day-old explants. Using the green fluorescent protein (GFP) marker, the expression of MD–GFP fusion proteins in the leaf, shoot, and root of hybrid poplar P. davidiana Dode × P. bollena Lauche was visualized for confirmation of transgene integration. Southern and Northern blot analysis also showed the integration of T-DNA into the genome and gene expression of transgenic plants. Our results suggest that younger leaves had higher transformation efficiency (~30%) than older leaves (10%).     

Mutagenic Effects of Iron Oxide Nanoparticles on Biological Cells

In recent years, there has been an increased interest in the design and use of iron oxide materials with nanoscale dimensions for magnetic, catalytic, biomedical, and electronic applications. The increased manufacture and use of iron oxide nanoparticles (IONPs) in consumer products as well as industrial processes is expected to lead to the unintentional release of IONPs into the environment. The impact of IONPs on the environment and on biological species is not well understood but remains a concern due to the increased chemical reactivity of nanoparticles relative to their bulk counterparts. This review article describes the impact of IONPs on cellular genetic components. The mutagenic impact of IONPs may damage an organism’s ability to develop or reproduce. To date, there has been experimental evidence of IONPs having mutagenic interactions on human cell lines including lymphoblastoids, fibroblasts, microvascular endothelial cells, bone marrow cells, lung epithelial cells, alveolar type II like epithelial cells, bronchial fibroblasts, skin epithelial cells, hepatocytes, cerebral endothelial cells, fibrosarcoma cells, breast carcinoma cells, lung carcinoma cells, and cervix carcinoma cells. Other cell lines including the Chinese hamster ovary cells, mouse fibroblast cells, murine fibroblast cells, Mytilus galloprovincialis sperm cells, mice lung cells, murine alveolar macrophages, mice hepatic and renal tissue cells, and vero cells have also shown mutagenic effects upon exposure to IONPs. We further show the influence of IONPs on microorganisms in the presence and absence of dissolved organic carbon. The results shed light on the transformations IONPs undergo in the environment and the nature of the potential mutagenic impact on biological cells.     

In Vitro/In Vivo Toxicity Evaluation and Quantification of Iron Oxide Nanoparticles

Increasing biomedical applications of iron oxide nanoparticles (IONPs) in academic and commercial settings have alarmed the scientific community about the safety and assessment of toxicity profiles of IONPs. The great amount of diversity found in the cytotoxic measurements of IONPs points toward the necessity of careful characterization and quantification of IONPs. The present document discusses the major developments related to in vitro and in vivo toxicity assessment of IONPs and its relationship with the physicochemical parameters of IONPs. Major discussion is included on the current spectrophotometric and imaging based techniques used for quantifying, and studying the clearance and biodistribution of IONPs. Several invasive and non-invasive quantification techniques along with the pitfalls are discussed in detail. Finally, critical guidelines are provided to optimize the design of IONPs to minimize the toxicity.     

Quercetin-encapsulated magnetoliposomes: Fabrication,optimization, characterization,and antioxidant studies

Quercetin (QU) faces challenges in its therapeutic efficacy due to its hydrophobic nature and limited oral bioavailability. Using a Box–Behnken design (BBD) approach, we developed QU-loaded magnetoliposomes (QMLs) to address these limitations. By encapsulating QU within iron oxide nanoparticles (IONPs) and liposomes (LPs), we enhanced its hydrophilicity and improved its potential for drug delivery. Through systematic adjustments of phosal, polyvinyl alcohol, and magnetic/IONPs, we optimized the particle size, zeta potential, and iron content of the QMLs. The formulations underwent comprehensive structural characterization using techniques, such as Fourier transform infrared spectroscopy, X-Ray diffraction, differential scanning calorimetry–thermogravimetric analysis, and energy-dispersive X-ray analysis, whereas their morphology was examined through field emission scanning electron microscopy. Furthermore, we evaluated the in vitro drug release of the QMLs and antioxidant activity of QU, QU-loaded LPs, and QMLs using DPPH, 2,2′-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid), and H₂O₂ scavenging assays, enabling us to compare their antioxidant potential and the efficiency of QU encapsulation within the magneto LPs. Practical Applications: This research holds significant practical implications, particularly in targeted drug delivery using magnetic liposomes. The developed system shows promise in enhancing cancer therapy, providing localized treatment for inflammation-related conditions, delivering drugs to the brain to address neurological disorders, promoting wound healing, and incorporating quercetin into skincare products for its antioxidant and antiaging benefits.     

Dynamic mechanical properties,magnetic and electrical behavior of iron oxide/ethylene vinyl acetate nanocomposites

Nanocomposites of ethylene vinyl acetate (EVA) containing iron oxide nanoparticles (IONPs) were prepared by open mill‐mixing technique. The effect of loading of IONPs in EVA was characterized by Fourier transform infrared (FTIR), X‐ray diffraction (XRD), transmission electron micrograph (TEM), and dynamic mechanical analysis (DMA). The FTIR spectra ascertain the intermolecular interaction between the polymer and IONPs. TEM and XRD studies revealed the structurally ordered arrangement of nanoparticles within the polymer matrix. DMA showed an increase in storage modulus and lesser damping characteristics of composite with the increase in loading of nanoparticles, whereas these properties decreased significantly with increase in temperature. The glass transition temperature shifted toward higher temperature with the increase in content of IONPs. Magnetic properties of the nanocomposites were investigated using vibrating sample magnetometer at room temperature. The saturation of magnetization was progressively increased with the increase in content of nanoparticles. The electrical conductivity, dielectric constant, and dielectric loss of the composite were found to be increased with the increase in volume fraction of nanoparticles. The polymer–filler interaction was also determined from the swelling studies. POLYM. COMPOS., 35:1989–1996, 2014. © 2014 Society of Plastics Engineers     

Using a bifunctional polymer for the functionalization of Fe3O4 nanoparticles

A bifunctional maleimido-tetra(ethylene glycol)-poly(glycerol monoacrylate) (MAL-TEG-PGA) polymer was synthesized and used as a linker to couple functional biomolecules to iron oxide nanoparticles. The cell-penetrating peptide Tat was chosen as a model ligand and successfully conjugated to the surface of Fe₃O₄ nanoparticles using MAL-TEG-PGA. The Tat-conjugated Fe₃O₄ nanoparticles can be prepared simply by applying the linker to the iron oxide nanoparticles and then coupling the Tat peptide to the maleimide terminus or by coating the nanoparticles with a pre-coupled linker. Cell-uptake studies demonstrated that the Tat peptide was an efficient functional biomolecule to translocate iron oxide nanoparticles into the cell nucleus. Tat-conjugated nanoparticles thus prepared may be useful for drug or gene delivery.     

Comparative Evaluation of Sucrosomial Iron and Iron Oxide Nanoparticles as Oral Supplements in Iron Deficiency Anemia in Piglets

Iron deficiency is the most common mammalian nutritional disorder. However, among mammalian species iron deficiency anemia (IDA), occurs regularly only in pigs. To cure IDA, piglets are routinely injected with high amounts of iron dextran (FeDex), which can lead to perturbations in iron homeostasis. Here, we evaluate the therapeutic efficacy of non-invasive supplementation with Sucrosomial iron (SI), a highly bioavailable iron supplement preventing IDA in humans and mice and various iron oxide nanoparticles (IONPs). Analysis of red blood cell indices and plasma iron parameters shows that not all iron preparations used in the study efficiently counteracted IDA comparable to FeDex-based supplementation. We found no signs of iron toxicity of any tested iron compounds, as evaluated based on the measurement of several toxicological markers that could indicate the occurrence of oxidative stress or inflammation. Neither SI nor IONPs increased hepcidin expression with alterations in ferroportin (FPN) protein level. Finally, the analysis of the piglet gut microbiota indicates the individual pattern of bacterial diversity across taxonomic levels, independent of the type of supplementation. In light of our results, SI but not IONPs used in the experiment emerges as a promising nutritional iron supplement, with a high potential to correct IDA in piglets.     

纳米铁的绿色合成及其在环境中的应用研究进展

纳米铁（零价铁及铁氧化物）比表面积大、还原能力强、反应活性高，是一种良好的环境功能材料。传统的纳米铁合成方法中，物理方法对反应所需仪器设备要求较高，化学方法使用的还原剂具有毒性，绿色合成方法能够有效克服传统方法的不足之处。本文首先根据合成途径、纳米铁的类型介绍了利用植物和微生物对纳米零价铁（nZVI）及纳米铁氧化物（IONPs）进行绿色合成的方法，同时论述了制备的纳米铁所表现的特征（如形貌、尺寸、聚集倾向、等电位点）。随后总结了纳米铁通过不同反应机制（吸附、还原、催化氧化）去除环境有机、无机污染物（染料、芳香族化合物、硝酸盐、重金属）的应用。最后指出了纳米铁在绿色合成与实际应用过程中存在的挑战性问题及解决方法，以期为纳米铁今后的深入研究和大规模的工业生产应用提供参考依据。     

pH-responsive polymer in a core–shell magnetic structure as an efficient carrier for delivery of doxorubicin to tumor cells

A pH-responsive polymer derived from polyethyleneimine with zwitterionic function was used as a shell around super paramagnetic iron oxide nanoparticles (SPIONs), to introduce an efficient drug carrier for cancer drug delivery and imaging. Core–shell magnetic Fe₃O₄@FA-PEI-SUC (SUC: Succinate conjugated) nanoparticles were attained and characterized. Right chemical attachments, 61.34% modification of primary amino groups of poly(ethyleneimine) (PEI) in PEI–SUC, spherical shape, core–shell structure, crystal structure of SPIONs, 18.23% polymer coating of NPs, 8% decrease in magnetization following polymer coating around SPIONs, doxorubicin loading efficiency 85.19%, two times more released amount in acidic pH, and proper toxicity results were obtained by different analysis methods.     

Facile modification of polysulfone hollow-fiber membranes via the incorporation of well-dispersed iron oxide nanoparticles for protein purification

Protein existence in wastewater is an important issue in wastewater management because proteins are generally present as contaminants and foulants. Hence, in this study, we focused on designing a polysulfone (PSf) hollow-fiber membrane embedded with hydrophilic iron oxide nanoparticles (IONPs) for protein purification by means of ultrafiltration. Before membrane fabrication, the dispersion stability of the IONPs was enhanced by the addition of a stabilizer, namely, citric acid (CA). Next, PSf–IONP–CA nanocomposite hollow-fiber membranes were prepared via a dry–wet spinning process and then characterized in terms of their hydrophilicity and morphology. Ultrafiltration and adsorption experiments were then conducted with bovine serum albumin as a model protein. The results that an IONP/CA weight ratio of 1:20 contributed to the most stable IONP dispersion. It was also revealed that the membrane incorporated with IONP–CA at a weight ratio of 1:20 exhibited the highest pure water permeability (58.6 L m⁻² h⁻¹ bar⁻¹) and protein rejection (98.5%) while maintaining a low protein adsorption (3.3 μg/cm²). The addition of well-dispersed IONPs enhanced the separation features of the PSf hollow-fiber membrane for protein purification. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47502.     

Preparation of carbon-encapsulated iron nanoparticles by co-carbonization of aromatic heavy oil and ferrocene

Carbon-encapsulated iron nanoparticles with uniform diameters have been synthesized on a large scale by co-carbonization of an aromatic heavy oil and ferrocene at 480 °C under autogenous pressure. The morphologies and structural features of the iron/carbon composites were investigated using TEM, HREM and XRD measurements. It was found that, by increasing the amount of ferrocene added from 2 wt.% to 45 wt.%, the size of the nanoparticles increased from 15 nm to 50 nm and the morphologies of the resulting products changed from spherical-type to iron-filled carbon nanorods when the ferrocene loading was higher than 30 wt.%. The iron particles pyrolyzed from ferrocene exist mainly in the form of α-Fe and small amounts of Fe₃C were also formed when the ferrocene content was higher than 20 wt.%. The formation mechanism of carbon-encapsulated iron nanoparticles is discussed briefly. This novel and simple approach constitutes a more practical method to prepare carbon-encapsulated metal nanoparticles than those reported to date.     

Highly moisture-proof polysilsesquioxane coating prepared via facile sol-gel process

A highly moisture-proof polysilsesquioxane coating was obtained from a new bis-silylated precursor, which was synthesized from 3-aminopropyltriethoxysilane (APTES) and m-xylylene diisocyanate (m-XDI) in tetrahydrofuran (THF) and verified by ¹H MAS NMR. For direct comparison purposes, an SiO₂ coating was also prepared by the Stöber method using tetraethoxysilane (TEOS) as the reactant. Interestingly, the coating obtained from the polysilsesquioxane sol exhibited a much higher moisture resistance capability than its counterpart, which was attributed to its more compact feature between nanoparticles as characterized by N₂ absorption experiment and transmission electron microscopy (TEM). Furthermore, its high transparency of about 92% showed potential for application in the protection of optical crystals.     

Acute exposure to silica nanoparticles enhances mortality and increases lung permeability in a mouse model of Pseudomonas aeruginosa pneumonia

Background

The lung epithelium constitutes the first barrier against invading pathogens and also a major surface potentially exposed to nanoparticles. In order to ensure and preserve lung epithelial barrier function, the alveolar compartment possesses local defence mechanisms that are able to control bacterial infection. For instance, alveolar macrophages are professional phagocytic cells that engulf bacteria and environmental contaminants (including nanoparticles) and secrete pro-inflammatory cytokines to effectively eliminate the invading bacteria/contaminants. The consequences of nanoparticle exposure in the context of lung infection have not been studied in detail. Previous reports have shown that sequential lung exposure to nanoparticles and bacteria may impair bacterial clearance resulting in increased lung bacterial loads, associated with a reduction in the phagocytic capacity of alveolar macrophages.

Results

Here we have studied the consequences of SiO₂ nanoparticle exposure on Pseudomonas aeruginosa clearance, Pseudomonas aeruginosa-induced inflammation and lung injury in a mouse model of acute pneumonia. We observed that pre-exposure to SiO₂ nanoparticles increased mice susceptibility to lethal pneumonia but did not modify lung clearance of a bioluminescent Pseudomonas aeruginosa strain. Furthermore, internalisation of SiO₂ nanoparticles by primary alveolar macrophages did not reduce the capacity of the cells to clear Pseudomonas aeruginosa. In our murine model, SiO₂ nanoparticle pre-exposure preferentially enhanced Pseudomonas aeruginosa-induced lung permeability (the latter assessed by the measurement of alveolar albumin and IgM concentrations) rather than contributing to Pseudomonas aeruginosa-induced lung inflammation (as measured by leukocyte recruitment and cytokine concentration in the alveolar compartment).

Conclusions

We show that pre-exposure to SiO₂ nanoparticles increases mice susceptibility to lethal pneumonia but independently of macrophage phagocytic function. The deleterious effects of SiO₂ nanoparticle exposure during Pseudomonas aeruginosa-induced pneumonia are related to alterations of the alveolar-capillary barrier rather than to modulation of the inflammatory responses.

Electronic supplementary material

The online version of this article (doi:10.1186/s12989-014-0078-9) contains supplementary material, which is available to authorized users.     

In situ preparation of monodispersed Ag/polyaniline/Fe3O4 nanoparticles via heterogeneous nucleation

Acrylic acid and styrene were polymerized onto monodispersed Fe₃O₄ nanoparticles using a grafting copolymerization method. Aniline molecules were then bonded onto the Fe₃O₄ nanoparticles by electrostatic self-assembly and further polymerized to obtain uniform polyaniline/Fe₃O₄ (PANI/Fe₃O₄) nanoparticles (approximately 35 nm). Finally, monodispersed Ag/PANI/Fe₃O₄ nanoparticles were prepared by an in situ reduction reaction between emeraldine PANI and silver nitrate. Fourier transform infrared and UV-visible spectrometers and a transmission electron microscope were used to characterize both the chemical structure and the morphology of the resulting nanoparticles.     

Plant Regeneration and Somatic Embryogenesis from Immature Embryos Derived through Interspecific Hybridization among Different Carica Species

Plant regeneration and somatic embryogenesis through interspecific hybridization among different Carica species were studied for the development of a papaya ringspot virus-resistant variety. The maximum fruit sets were recorded from the cross of the native variety C. papaya cv. Shahi with the wild species C. cauliflora. The highest hybrid embryos were recorded at 90 days after pollination and the embryos were aborted at 150 days after pollination. The immature hybrid embryos were used for plant regeneration and somatic embryogenesis. The 90-day-old hybrid embryos from the cross of C. papaya cv. Shahi × C. cauliflora showed the highest percentage of germination, as well as plant regeneration on growth regulators free culture medium after 7 days pre-incubation on half-strength MS medium supplemented with 0.2 mg/L BAP, 0.5 mg/L NAA and 60 g/L sucrose. The 90-day-old hybrid embryos from the cross of C. papaya cv. Shahi × C. cauliflora produced maximum callus, as well as somatic embryos when cultured on half-strength MS medium containing 5 mg/L 2,4-D, 100 mg/L glutamine, 100 mg/L casein hydrolysate and 60 g/L sucrose. The somatic embryos were transferred into half-strength MS medium containing 0.5 mg/L BAP and 0.2 mg/L NAA and 60 g/L sucrose for maturation. The highest number of regenerated plants per hybrid embryo (10.33) was recorded from the cross of C. papaya cv. Shahi × C. cauliflora. Isoenzyme and dendrogram cluster analysis using UPGMA of the regenerated F₁ plantlets confirmed the presence of the hybrid plantlets.