From non‐tidal shelf to tide‐dominated strait: The Miocene Bonifacio Basin,Southern Corsica

This study documents a change from a non‐tidal to tide‐dominated shelf system that occurred between Corsica and Sardinia (the Bonifacio Basin, Western Mediterranean) during the early to middle Miocene. The non‐tidal deposits formed on a low‐energy siliciclastic shelf surrounded by progradational coralline algal ramps at full highstand. The tidal deposits consist of an up to 200 m thick succession of siliciclastic to coralline‐rich cross‐beds formed by large sub‐tidal dunes. Based on outcrop and sub‐surface data, it is possible to conclude that the tidal currents were amplified as a consequence of the rapid subsidence of the basin centre due to tectonic activity. It is suggested that this tectonic event initiated the strait between Corsica and Sardinia. The strait was deep enough to allow the tidal flux to be significantly increased, generating a localized strong tidal current at the junction between the Western Mediterranean and the East Corsica Basin.     

Subtropical to temperate facies from a transition zone, mixed carbonate–siliciclastic system, Palaeogene, North Carolina, USA

Palaeogene passive margin sediments on the US mid‐Atlantic coastal plain provide valuable insight into facies interaction and distribution on mixed carbonate–siliciclastic shelves. This study utilizes well cuttings, outcrop, core, and seismic data to document temporal and spatial variations in admixed bryozoan‐rich skeletal carbonates and sandy siliciclastic units that were deposited on a humid passive margin located in the vicinity of a major marine transition zone. This zone was situated between north‐flowing, warm waters of the ancestral Gulf Stream (carbonate dominated settings) and south‐flowing, cold waters of the ancestral Labrador Current (siliciclastic dominated settings). Some degree of mixing of carbonates and siliciclastics occurs in all facies; however, siliciclastic‐prone sediments predominate in nearshore settings, while carbonate‐prone sediments are more common in more open marine settings of the inner shelf break and deep shelf. A distinctive dual‐break shelf depositional profile originated following a major Late Cretaceous to Palaeocene transgression that drowned the earlier shallow platform. This profile was characterized by prominent mid‐shelf break dividing the shallow shelf from the deep shelf and a major continental shelf/slope break. Incomplete filling of available accommodation space during successive buildup of the shallow shelf preserved the topographic break on this passive margin. Storm wave base also contributed to the preservation of the dual‐break shelf geometry by beveling shallow shelf sediments and transporting them onto and seaward of the mid‐shelf break. Sediment fines in deep shelf facies were produced in place, transported downdip from the shallow shelf by storm ebb currents and boundary currents, and reworked from adjacent areas of the deep shelf by strike‐parallel boundary currents. Regional climate and boundary currents controlled whether carbonate or siliciclastic material was deposited on the shelf, with warmer waters and more humid climates favouring carbonate deposition and cooler, more arid conditions favouring glaucony and siliciclastic dominated deposition. Continuous wave and current sweeping of the shallow shelf favoured deposition of mud‐lean facies across much of the shallow shelf. Skeletal components in much of the carbonate‐rich strata formed in warm, nutrient‐rich subtropical waters, as indicated by widespread occurrences of larger benthic foraminifera and molluscan assemblages. These indicators of warm water deposition within the bryozoan‐mollusk‐rich carbonate assemblage on this shelf provide an example of a warm water bryomol assemblage; such facies generally are associated with cooler water depositional settings.     

High‐resolution sequence stratigraphy of the Maastrichtian‐Ypresian succession along the eastern scarp face of Kharga Oasis,southern Western Desert,Egypt

A thick Maastrichtian‐Ypresian succession, dominated by marine siliciclastic and carbonate deposits of the regionally recognized Nile Valley and Garra El‐Arbain facies associations, is exposed along the eastern escarpment face of Kharga Oasis, located in the Western Desert of Egypt. The main objectives of the present study are: (i) to establish a detailed biostratigraphic framework; (ii) to interpret the depositional environments; and (iii) to propose a sequence stratigraphic framework in order to constrain the palaeogeographic evolution of the Kharga sub‐basin during the Maastrichtian‐Ypresian time interval. The biostratigraphic analysis suggests the occurrence of 10 planktonic zones; two in the Early Maastrichtian (CF8b and CF7), four in the Palaeocene (P2, P3, P4c and P5) and four in the Early Eocene (E1, E2, E3 and E4). Recorded zonal boundaries and biostratigraphic zones generally match with those proposed elsewhere in the region. The stratigraphic succession comprises seven third‐order depositional sequences which are bounded by unconformities and their correlative conformities which can be correlated within and outside Egypt. These depositional sequences are interpreted as the result of eustatic sea‐level changes coupled with local tectonic activities. Each sequence contains a lower retrogradational parasequence set bounded above by a marine‐flooding surface and an upper progradational parasequence set bounded above by a sequence boundary. Parasequences within parasequence sets are stacked in landward‐stepping and seaward‐stepping patterns indicative of transgressive and highstand systems tracts, respectively. Lowstand systems tracts were not developed in the studied sections, presumably due to the low‐relief ramp setting. The irregular palaeotopography of the Dakhla Basin, which was caused by north‐east to south‐west trending submerged palaeo‐highs and lows, together with the eustatic sea‐level fluctuations, controlled the development and location of the two facies associations in the Kharga Oasis, the Nile Valley (open marine) and Garra El‐Arbain (marginal marine).     

Evolution of an ancient (Lower Cretaceous) marginal‐marine system from tide‐dominated to wave‐dominated deposition,McMurray Formation

Regionally extensive parasequences in the upper McMurray Formation, Grouse Paleovalley, north‐east Alberta, Canada, preserve a shift in depositional processes in a paralic environment from tide domination, with notable fluvial influence, through to wave domination. Three stacked parasequences form the upper McMurray Formation and are separated by allogenic flooding surfaces. Sediments within the three parasequences are grouped into three facies associations: wave‐dominated/storm‐dominated deltas, storm‐affected shorefaces to sheltered bay‐margin and fluvio‐tidal brackish‐water channels. The two oldest parasequences comprise dominantly tide‐dominated, wave‐influenced/fluvial‐influenced, shoreface to bay‐margin deposits bisected by penecontemporaneous brackish‐water channels. Brackish‐water channels trend approximately north‐west/south‐east, which is perpendicular to the interpreted shoreline trend; this implies that the basinward and progradational direction was towards the north‐west during deposition of the upper McMurray Formation in Grouse Paleovalley. The youngest parasequence is interpreted as amalgamated wave‐dominated/storm‐dominated delta lobes. The transition from tide‐dominated deposition in the oldest two parasequences to wave‐dominated deposition in the youngest is attributed mainly to drowning of carbonate highlands to the north and north‐west of the study area, and potentially to relative changes in accommodation space and deposition rate. The sedimentological, ichnological and regional distribution of the three facies associations within each parasequence are compared to modern and Holocene analogues that have experienced similar shifts in process dominance. Through this comparison it is possible to consider how shifts in depositional processes are expressed in the rock record. In particular, this study provides one of few ancient examples of preservation of depositional process shifts and showcases how topography impacts the character and architecture of marginal‐marine systems.     

An Early Paleozoic Inter‐Platform Shelf in the Southwest of Tarim Basin,NW China and its Significance for Petroleum Exploration

An early Paleozoic inter‐platform, platform, slope and shelf succession comprised of five Cambrian to mid‐Ordovician seismic sequences, has been identified in the southwestern part of the Tarim Basin. A previously unknown, elongate shelf succession that extends from east to west transects the Taxinan area of the southwestern Tarim Basin. It was flanked by carbonate platforms and platform margins, and by peri‐platform margin slopes on its north and south sides. The Markit platform margin and slope, located along the northern side of the shelf, extended nearly linearly west to east with some headlands and embayments towards the east. The Tangnan platform margin and slope, located along the southern side of the shelf, extended southwest to northeast and was more sinuous with pronounced northwest‐directed headlands flanked by embayments. Differentiation of these settings began in earliest Cambrian time during continental breakup. Initially, broad gentle slopes flanked an open shelf seaway in Cambrian time. In Early Ordovician time, the Markit and Tangnan platform margins became more distinct and rimmed, and were flanked by slightly steeper, but still very gentle slopes. During their deposition, these platform margins and their adjoining slopes exhibited some lateral migration, with a slight overall widening of the open shelf seaway between them from Cambrian to Ordovician time. The presence of these platform margin and slope successions in the southwestern area of the Tarim basin provides another focus for petroleum exploration and discovery of additional carbonate reef‐shoal reservoirs in the Markit and Tangnan areas. The adjoining deep‐water shelf shale and mudstone shelf succession itself is an additional prospective petroleum source rock in close proximity to these potential reef‐shoal reservoirs.     

A sequence stratigraphic model for an intensely bioturbated shallow-marine sandstone: the Bridport Sand Formation, Wessex Basin, UK

The Bridport Sand Formation is an intensely bioturbated sandstone that represents part of a mixed siliciclastic‐carbonate shallow‐marine depositional system. At outcrop and in subsurface cores, conventional facies analysis was combined with ichnofabric analysis to identify facies successions bounded by a hierarchy of key stratigraphic surfaces. The geometry of these surfaces and the lateral relationships between the facies successions that they bound have been constrained locally using 3D seismic data. Facies analysis suggests that the Bridport Sand Formation represents progradation of a low‐energy, siliciclastic shoreface dominated by storm‐event beds reworked by bioturbation. The shoreface sandstones form the upper part of a thick (up to 200 m), steep (2–3°), mud‐dominated slope that extends into the underlying Down Cliff Clay. Clinoform surfaces representing the shoreface‐slope system are grouped into progradational sets. Each set contains clinoform surfaces arranged in a downstepping, offlapping manner that indicates forced‐regressive progradation, which was punctuated by flooding surfaces that are expressed in core and well‐log data. In proximal locations, progradational shoreface sandstones (corresponding to a clinoform set) are truncated by conglomerate lags containing clasts of bored, reworked shoreface sandstones, which are interpreted as marking sequence boundaries. In medial locations, progradational clinoform sets are overlain across an erosion surface by thin (<5 m) bioclastic limestones that record siliciclastic‐sediment starvation during transgression. Near the basin margins, these limestones are locally thick (>10 m) and overlie conglomerate lags at sequence boundaries. Sequence boundaries are thus interpreted as being amalgamated with overlying transgressive surfaces, to form composite erosion surfaces. In distal locations, oolitic ironstones that formed under conditions of extended physical reworking overlie composite sequence boundaries and transgressive surfaces. Over most of the Wessex Basin, clinoform sets (corresponding to high‐frequency sequences) are laterally offset, thus defining a low‐frequency sequence architecture characterized by high net siliciclastic sediment input and low net accommodation. Aggradational stacking of high‐frequency sequences occurs in fault‐bounded depocentres which had higher rates of localized tectonic subsidence.     

Expanding the spectrum of shallow‐marine,mixed carbonate–siliciclastic systems: Processes,facies distribution and depositional controls of a siliciclastic‐dominated example

Most of the present knowledge of shallow‐marine, mixed carbonate–siliciclastic systems relies on examples from the carbonate‐dominated end of the carbonate–siliciclastic spectrum. This contribution provides a detailed reconstruction of a siliciclastic‐dominated mixed system (Pilmatué Member of the Agrio Formation, Neuquén Basin, Argentina) that explores the variability of depositional models and resulting stratigraphic units within these systems. The Pilmatué Member regressive system comprises a storm‐dominated, shoreface to basinal setting with three subparallel zones: a distal mixed zone, a middle siliciclastic zone and a proximal mixed zone. In the latter, a significant proportion of ooids and bioclasts were mixed with terrigenous sediment, supplied mostly via along‐shore currents. Storm‐generated flows were the primary processes exporting fine sand and mud to the middle zone, but were ineffective to remove coarser sediment. The distal zone received low volumes of siliciclastic mud, which mixed with planktonic‐derived carbonate material. Successive events of shoreline progradation and retrogradation of the Pilmatué system generated up to 17 parasequences, which are bounded by shell beds associated with transgressive surfaces. The facies distribution and resulting genetic units of this siliciclastic‐dominated mixed system are markedly different to the ones observed in present and ancient carbonate‐dominated mixed systems, but they show strong similarities with the products of storm‐dominated, pure siliciclastic shoreface–shelf systems. Basin‐scale depositional controls, such as arid climatic conditions and shallow epeiric seas might aid in the development of mixed systems across the full spectrum (i.e. from carbonate‐dominated to siliciclastic‐dominated end members), but the interplay of processes supplying sand to the system, as well as processes transporting sediment across the marine environment, are key controls in shaping the tridimensional facies distribution and the genetic units of siliciclastic‐dominated mixed systems. Thus, the identification of different combinations of basin‐scale factors and depositional processes is key for a better prediction of conventional and unconventional reservoirs within mixed, carbonate–siliciclastic successions worldwide.     

Depositional processes of the Zhushadong and Mantou formations (Early to Middle Cambrian), Shandong Province,China: roles of archipelago and mixed carbonate–siliciclastic sedimentation on cycle genesis during initial flooding of the North China Platform

To understand the depositional processes and environmental changes during the initial flooding of the North China Platform, this study focuses on the Lower to Middle Cambrian Zhushadong and Mantou formations in Shandong Province, China. The succession in the Jinan and Laiwu areas comprises mixed carbonate and siliciclastic deposits composed of limestone, dolostone, stromatolite, thrombolite, purple and grey mudstone, and sandstone. A detailed sedimentary facies analysis of seven well‐exposed sections suggests that five facies associations are the result of an intercalation of carbonate and siliciclastic depositional environments, including local alluvial fans, shallowing‐upward carbonate–siliciclastic peritidal cycles, oolite dominant shoals, shoreface and lagoonal environments. These facies associations successively show a transition from an initially inundated tide‐dominated carbonate platform to a wave‐dominated shallow marine environment. In particular, the peritidal sediments were deposited during a large number of depositional cycles. These sediments consist of lime mudstone, dolomite, stromatolite and purple and grey mudstones. These shallowing‐upward cycles generally resulted from carbonate production in response to an increase of accommodation during rising sea‐level. The carbonate production was, however, interrupted by frequent siliciclastic input from the adjacent emergent archipelago. The depositional cycles thus formed under the influence of both autogenetic changes, including sediment supply from the archipelago, and allogenic control of relative sea‐level rise in the carbonate factory. A low‐relief archipelago with an active tidal regime allowed the development of tide‐dominated siliciclastic and carbonate environments on the vast platform. Siliciclastic input to these tidal environments terminated when most of the archipelago became submerged due to a rapid rise in sea‐level. This study provides insights on how a vast Cambrian carbonate platform maintained synchronous sedimentation under a tidal regime, forming distinct cycles of mixed carbonates and siliciclastics as the system kept up with rising relative sea‐level during the early stage of basin development in the North China Platform.     

Anatomy of an Upper Triassic continental to marginal‐marine system: the mixed siliciclastic–carbonate Travenanzes Formation (Dolomites,Northern Italy)

The Travenanzes Formation is a terrestrial to shallow‐marine, siliciclastic–carbonate succession (200 m thick) that was deposited in the eastern Southern Alps during the Late Triassic. Sedimentary environments and depositional architecture have been reconstructed in the Dolomites, along a 60 km south–north transect. Facies alternations in the field suggest interfingering between alluvial‐plain, flood‐basin and shallow‐lagoon deposits, with a transition from terrestrial to marine facies belts from south to north. The terrestrial portion of the Travenanzes Formation consists of a dryland river system, characterized by multicoloured floodplain mudstones with scattered conglomeratic fluvial channels, merging downslope into small ephemeral streams and sheet‐flood sandstones, and losing their entire discharge subaerially before the shoreline. Calcic and vertic palaeosols indicate an arid/semi‐arid climate with strong seasonality and intermittent discharge. The terrestrial/marine transition shows a coastal mudflat, the flood basin, which is usually exposed, but at times is inundated by both major river floods and sea‐water storm surges. Locally coastal sabkha deposits occur. The marine portion of the Travenanzes Formation comprises carbonate tidal‐flat and shallow‐lagoon deposits, characterized by metre‐scale shallowing‐upward peritidal cycles and subordinate intercalations of dark clays from the continent. The depositional architecture of the Travenanzes Formation suggests an overall transgressive pattern organized in three carbonate–siliciclastic cycles, corresponding to transgressive–regressive sequences with internal higher‐frequency sedimentary cycles. The metre‐scale sedimentary cyclicity of the Travenanzes Formation continues without a break in sedimentation into the overlying Dolomia Principale. The onset of the Dolomia Principale epicontinental platform is marked by the exhaustion of continental sediment supply.     

Carbonate platform growth and cyclicity at a terminal Proterozoic passive margin, Infra Krol Formation and Krol Group, Lesser Himalaya, India

Abstract The Infra Krol Formation and overlying Krol Group constitute a thick (< 2 km), carbonate-rich succession of terminal Proterozoic age that crops out in a series of doubly plunging synclines in the Lesser Himalaya of northern India. The rocks include 18 carbonate and siliciclastic facies, which are grouped into eight facies associations: (1) deep subtidal; (2) shallow subtidal; (3) sand shoal; (4) peritidal carbonate complex; (5) lagoonal; (6) peritidal siliciclastic–carbonate; (7) incised valley fill; and (8) karstic fill. The stromatolite-rich, peritidal complex appears to have occupied a location seaward of a broad lagoon, an arrangement reminiscent of many Phanerozoic and Proterozoic platforms. Growth of this complex was accretionary to progradational, in response to changes in siliciclastic influx from the south-eastern side of the lagoon. Metre-scale cycles tend to be laterally discontinuous, and are interpreted as mainly autogenic. Variations in the number of both sets of cycles and component metre-scale cycles across the platform may result from differential subsidence of the interpreted passive margin. Apparently non-cyclic intervals with shallow-water features may indicate facies migration that was limited compared with the dimensions of facies belts. Correlation of these facies associations in a sequence stratigraphic framework suggests that the Infra Krol Formation and Krol Group represent a north- to north-west-facing platform with a morphology that evolved from a siliciclastic ramp, to carbonate ramp, to peritidal rimmed shelf and, finally, to open shelf. This interpretation differs significantly from the published scheme of a basin centred on the Lesser Himalaya, with virtually the entire Infra Krol–Krol succession representing sedimentation in a persistent tidal-flat environment. This study provides a detailed Neoproterozoic depositional history of northern India from rift basin to passive margin, and predicts that genetically related Neoproterozoic deposits, if they are present in the High Himalaya, are composed mainly of slope/basinal facies characterized by fine-grained siliciclastic and detrital carbonate rocks, lithologically different from those of the Lesser Himalaya.     

云南兰坪盆地三叠纪沉积作用与古地理演化

根据岩石沉积类型、物源供给、成因机制和沉积序列 ,结合区域地质特征 ,将兰坪盆地三叠系划分为陆相火山泥石流、河流相、三角洲相、潮坪相、浅海陆棚相、碳酸盐台地相和深水盆地相7种主要沉积类型。通过对沉积相的详细分析 ,恢复其古地理格架和面貌 ,探讨岩相古地理的变迁历史 ,从而表明三叠纪早期到晚期 ,其古地理经历了陆相环境→碎屑海盆→碳酸盐海盆到碎屑海盆的转换 ,即两次海侵 海退旋回。早期的海域分布范围较小 ,晚期的海域分布范围较宽 ,并成为统一的海盆。     

西藏晚三叠世北羌塘前陆盆地构造层序及充填样式

晚三叠世北羌塘前陆盆地为处于金沙江缝合带南缘的周缘前陆盆地,其中充填了厚度大于2 500 m的晚三叠世肖茶卡群,自南向北可分出4个沉积相带,显示为北厚南薄的楔形沉积体,具双物源、双古流向以及沉降中心和沉积中心不一致性等特点,以不整合面为界可将其分为2个构造层序,下部构造层序以诺利期复理石建造为特征,上部构造层序以瑞替期磨拉石建造为特征.     

Styles of interaction between aeolian,fluvial and shallow marine environments in the Pennsylvanian to Permian lower Cutler beds,south‐east Utah,USA

The Pennsylvanian to Permian lower Cutler beds comprise a 200 m thick mixed continental and shallow marine succession that forms part of the Paradox foreland basin fill exposed in and around the Canyonlands region of south‐east Utah. Aeolian facies comprise: (i) sets and compound cosets of trough cross‐bedded dune sandstone dominated by grain flow and translatent wind‐ripple strata; (ii) interdune strata characterized by sandstone, siltstone and mudstone interbeds with wind‐ripple, wavy and horizontal planar‐laminated strata resulting from accumulation on a range of dry, damp or wet substrate‐types in the flats and hollows between migrating dunes; and (iii) extensive, near‐flat lying wind‐rippled sandsheet strata. Fluvial facies comprise channel‐fill sandstones, lag conglomerates and finer‐grained overbank sheet‐flood deposits. Shallow marine facies comprise carbonate ramp limestones, tidal sand ridges and bioturbated marine mudstones. During episodes of sand sea construction and accumulation, compound transverse dunes migrated primarily to the south and south‐east, whereas south‐westerly flowing fluvial systems periodically punctuated the dune fields from the north‐east. Several vertically stacked aeolian sequences are each truncated at their top by regionally extensive surfaces that are associated with abundant calcified rhizoliths and bleaching of the underlying beds. These surfaces record the periodic shutdown and deflation of the dune fields to the level of the palaeo‐water‐table. During episodes of aeolian quiescence, fluvial systems became more widespread, forming unconfined braid‐plains that fed sediment to a coastline that lay to the south‐west and which ran approximately north‐west to south‐east for at least 200 km. Shallow marine systems repeatedly transgressed across the broad, low‐relief coastal plain on at least 10 separate occasions, resulting in the systematic preservation of units of marine limestone and calcarenite between units of non‐marine aeolian and fluvial strata, to form a series of depositional cycles. The top of the lower Cutler beds is defined by a prominent and laterally extensive marine limestone that represents the last major north‐eastward directed marine transgression into the basin prior to the onset of exclusively non‐marine sedimentation of the overlying Cedar Mesa Sandstone. Styles of interaction between aeolian, fluvial and marine facies associations occur on two distinct scales and represent the preserved expression of both small‐scale autocyclic behaviour of competing, coeval depositional systems and larger‐scale allocyclic changes that record system response to longer‐term interdependent variations in climatic and eustatic controlling mechanisms. The architectural relationships and system interactions observed in the lower Cutler beds demonstrate that the succession was generated by several cyclical changes in both climate and relative sea‐level, and that these two external controls probably underwent cyclical change in harmony with each other in the Paradox Basin during late Pennsylvanian and Permian times. This observation supports the hypothesis that both climate and eustasy were interdependent at this time and were probably responding to a glacio‐eustatic driving mechanism.     

Evolution of contourite systems in the late Cretaceous Chalk Sea along the Tornquist Zone

Based on integration of seismic reflection and well data analysis this study examines two major contourite systems that developed during the late Cretaceous in the southern Baltic Sea. The evolution of these Chalk Sea contourite systems between the Kattegat and the southern Baltic Sea started when Turonian to Campanian inversion tectonics overprinted the rather flat sea floor of the epeiric Chalk Sea. The Tornquist Zone and adjacent smaller blocks were uplifted and formed elongated obstacles that influenced the bottom currents. As a consequence of the inversion, the sea floor west of the Tornquist Zone tilted towards the north‐east, creating an asymmetrical sub‐basin with a steep marginal slope in the north‐east and a gentle dipping slope in the south‐west. A south‐east directed contour current emerged in the Coniacian or Santonian along the south‐western basin margin, creating contourite channels and drifts. The previously studied contourite system offshore Stevns Klint is part of this system. A second, deeper and north‐west directed counter‐flow emerged along and parallel to the Tornquist Zone in the later Campanian, but was strongest in the Maastrichtian. This bottom current moderated the evolution of a drift‐moat system adjacent to the elevated Tornquist Zone. The near surface Alnarp Valley in Scania represents the Danian palaeo‐moat that linked the Pomeranian Bay with the Kattegat. The previously studied contourite system in the Kattegat represents the north‐western prolongation of this system. This study links previous observations from the Kattegat and offshore Stevns Klint to the here inferred two currents, a more shallow, south‐east directed and a deeper, north‐west directed flow.     

Downslope‐migrating sandwaves and platform‐margin clinoforms in a current‐dominated,distally steepened temperate‐carbonate ramp (Guadix Basin,Southern Spain)

During the Late Tortonian, platform‐margin‐prograding clinoforms developed at the south‐western margin of the Guadix Basin. Large‐scale wedge‐shaped deposits here comprise 26 rhythms of mixed carbonate–siliciclastic bedset packages and marl beds. These sediments were deposited on a shallow‐water, temperate‐carbonate distally steepened ramp. A downslope‐migrating sandwave field developed in this ramp, with sandwaves moving progressively down the ramp to the ramp‐slope, where they destabilized, folded and occasionally collapsed. Downslope sandwave migration was induced by currents flowing basinwards. During the Late Tortonian, the Guadix Basin was open north to the Atlantic Ocean via the Dehesas de Guadix Strait and connected east to the Mediterranean Sea through the Almanzora Corridor. According to the proposed current circulation model for the Guadix Basin for this time, surface marine currents from the Atlantic entered the basin from the northern seaway. These currents moved counter‐clockwise and shifted the sediment on the ramp, forming sandwaves that migrated downslope. The development of platform‐margin prograding clinoforms by the basinward sediment‐transport mechanisms inferred here is known relatively poorly in the ancient sedimentary record. Moreover, these wedge‐shaped geometries are similar to those found in some shelves in the Western Mediterranean Sea and could represent an outcrop analogue to (sub)‐recent, platform‐margin clinoforms revealed by high‐resolution seismic studies.     

Ramp sedimentation across a middle Albian,Arctic embayment: Influence of subsidence,eustasy and sediment supply on stratal architecture and facies distribution,Lower Cretaceous,Western Canada Foreland Basin

Regional mapping of Middle Albian, shallow‐marine clastic strata over ca 100 000 km² of the Western Canada Foreland Basin was undertaken to investigate the relationship between large‐scale stratal architecture and lithology. Results suggest that, over ca 5 Myr, stratal geometry and facies were dynamically linked to tectonic activity in the adjacent Cordillera. Higher frequency modulation of accommodation is most reasonably ascribed to eustasy. The Harmon and Cadotte alloformations were deposited at the southern end of an embayment of the Arctic Ocean. The Harmon alloformation, forming the lower part of the succession, constitutes a wedge of marine mudstone that thickens westward over 400 km from <5 m near the forebulge to >150 m in the foredeep. Constituent allomembers are also wedge‐shaped but lack distinct clinothems, a rollover point or downlapping geometry. Ubiquitous wave ripples indicate that the sea floor lay above storm wave base. Deposition took place on an extremely low‐gradient ramp, where accommodation was limited by effective wave base. Lobate, river‐dominated deltas fringed the southern margin of the basin. The largest deltas are stacked in the same area, suggesting protracted stability of the feeder river. A buried palaeo‐valley on the underlying sub‐Cretaceous unconformity may have influenced compaction and controlled river location for ca 3 Myr. Adjacent to the western Cordillera, a predominantly mudstone succession is interbedded with abundant storm beds of very fine‐grained sandstone and siltstone that reflect supply from the adjacent orogen. Bioturbation indices in the Harmon alloformation range from zero to six which reflects the influence of stressors related to river‐mouth proximity. Harmon alloformation mudstone grades abruptly upward into marine sandstone and conglomerate of the overlying Cadotte alloformation. The Cadotte is composed of three allomembers ‘CA’ to ‘CC’, that represent the deposits of prograding strandplains 200 × 300 km in extent. Allomembers ‘CA’ and ‘CB’ are strongly sandstone‐dominated, whereas allomember ‘CC’ contains abundant conglomerate in the west. The dominantly aggradational wedge of Harmon alloformation mudstone records flexural subsidence driven by active thickening in the adjacent orogen: the high accommodation rate trapped coarser clastic detritus close to the basin margin. In contrast, the tabular, highly progradational sandstone and conglomerate bodies of the Cadotte alloformation record a low subsidence rate, implying tectonic quiescence in the adjacent orogen. Erosional unloading of the orogen through Cadotte time steepened rivers to the extent that they delivered gravel to the shore. These observations support an ‘anti‐tectonic’ model of gravel supply proposed previously for the United States portion of the Cretaceous foreland basin. Because Cadotte allomembers do not thicken appreciably into the foredeep, accommodation changes that controlled these transgressive–regressive successions were probably of eustatic origin.     

Structure and evolution of a Messinian mixed carbonate‐siliciclastic platform: the role of evaporites (Sorbas Basin,South‐east Spain)

The Sorbas Member is a late Messinian complex sedimentary system that formed immediately following deposition of the Messinian evaporites in the Sorbas Basin (South‐east Spain). This work describes the sequence architecture and facies organization of a continuous kilometre long, alluvial fan to open platform transect near the village of Cariatiz in the north‐east of the basin. The post‐evaporitic Cariatiz platform was a mixed carbonate‐siliciclastic system composed of four intermediate‐frequency, fifth‐order depositional sequences (Depositional Sequences 1 to 4) arranged in an overall prograding trend. The intense fracturing and brecciation of these deposits is attributed to the deformation and dissolution of an evaporite body measuring several tens of metres in thickness. The four sequences display significant spatial–temporal variability in both architecture and facies distribution, with two main phases: (i) Depositional Sequences 1 and 2 are ooid and oobioclastic dominated, and show normal marine faunas; and (ii) Depositional Sequences 3 and 4 show a higher siliciclastic contribution and are microbialite dominated. These important changes are interpreted as modifications of the primary controlling factors. Following an initial 70 m drowning, possibly linked to increased oceanic input, Depositional Sequences 1 to 3 were controlled mainly by eustatic variations and inherited topography; their progradation destabilized the evaporite body near the end of the Depositional Sequence 2 period. During the second phase, Depositional Sequences 3 and 4 recorded a progressive restriction of the Sorbas Basin related to a 30 to 40 m fall in water level that was driven mainly by regional factors. These regional factors were dissolution and gravity‐induced deformation of the evaporites and correlative evaporative fluid circulation associated with the contrasted arid/humid regional climate that, respectively, controlled sequence geometry and fluctuating water salinity which caused a microbialite bloom.     

塔里木盆地构造—古地理演化

摘要构造—古地理演化对盆地分析与油气资源评价具有重要意义,通过古构造恢复结合区域地质背景,综合分析塔里木盆地构造—古地理演化过程。塔里木盆地经历克拉通基底形成阶段、南华—震旦纪强伸展—挤压阶段、寒武—奥陶纪弱伸展—强挤压阶段、志留—白垩纪振荡升降变迁阶段、新生代弱伸展—强挤压阶段等5大构造演化阶段。塔里木盆地南华—震旦纪发育北东向陆内窄深裂谷系统,不同于显生宙;寒武纪—早奥陶世发育“两台一盆”的“东西分块”的大型克拉通内碳酸盐岩台地,中-晚奥陶世碳酸盐岩台地快速演变为“南北分带”;志留—泥盆纪形成克拉通内坳陷海相碎屑岩沉积体系;石炭—二叠纪发育克拉通内碎屑岩夹碳酸盐岩的浅海—海陆过渡相沉积;中生代发育一系列分隔的快速变迁的陆内坳陷碎屑岩沉积;新生代发育前陆盆地陆相磨拉石沉积,形成复杂的叠合盆地。受控原—新特提斯洋与南天山洋的开启—闭合,以及新生代印度板块挤压的远程效应,塔里木盆地构造—古地理具有多期性、多样性、迁移性与强烈的改造性,不同于典型的克拉通盆地。     

南海万安盆地构造—层序发育特征与构造—沉积充填演化

万安盆地是南海西南部重要的沉积盆地之一,深入分析其构造—沉积充填特征对于认识南海南部主要构造事件及其沉积响应具有重要的科学意义.利用覆盖全盆地的二维地震资料,结合国内外的研究成果,对万安盆地构造—层序特征及其构造—沉积充填演化进行分析.研究表明,万安盆地内新生代以来可识别出8个主要的二级/三级层序界面.沉降模拟显示,盆地沉降整体表现出一个“快—慢—快”的过程,且整体呈现出东高西低,中高南低的特征.综合构造层序特征和沉降模拟结果,万安盆地新生代以来沉积演化可分为5个阶段:初始裂陷期、晚期裂陷期、断坳转换期、裂后热沉降期和裂后加速热沉降期.盆地自形成以来,沉降主要受东亚大陆边缘区域拉张所造成的深部断裂的影响,至上新世,万安断裂转而成为盆地沉降的主要影响因素,并由此造成了早期盆地沉降中心由中部向西迁移,然后再逐步向东迁移的特征.渐新世至早中新世为盆地裂陷阶段,以陆源碎屑岩沉积为主,断陷早期可能为湖相,晚期为浅海相;中中新世为盆地断坳转换阶段,晚中新世以来为盆地裂后热沉降阶段,二者均发育陆源碎屑岩和自生碳酸盐岩两种沉积类型,且裂后热沉降期碳酸盐岩沉积范围相对缩小,陆缘碎屑岩沉积范围相对扩大.      

Alluvial sedimentation patterns in the Munster Basin, Ireland

Post-Caledonian southern Ireland witnessed the development of a NE-SW orientated half-graben known as the Munster Basin. More than 7 km of non-marine sediments accumulated in the basin during the late Middle and Late Devonian. Marine conditions became established in the southern part of the basin at the end of the Devonian. In this paper, a model for the evolving style of sedimentation in the basin and its periphery is constructed with the aim of identifying the major factors which controlled sedimentation patterns and the architecture of the basin fill. The depositional history of the basin is considered in terms of four successive episodes. During Episode I, gravelly alluvial fans flanked upland areas around the northeastern and northern basin perimeter. These graded southwestwards to a floodplain dominated by sheet-floods. In the western part of the basin, the first of three major fluvial influxes into the basin commenced. During Episode II, the first influx developed into a large sandy braided complex. The sediment was derived from a distant source area located to the north and west of the basin and was transported diagonally across the basin towards the southeast. Episode III witnessed a second influx which drained into the basin from the northeast and north. River channels were of low sinuosity and graded distally to an ephemeral playa lake. Episode IV was marked by a third fluvial influx from the west and northwest. This was confined to the southern half of the basin and drainage was directed towards the east. The fluvial distributaries were flanked by permanently flooded overbank areas. This influx coincided with the first marine transgression which advanced westwards. The end of Episode IV coincided with the beginning of the Carboniferous and was marked by a major marine transgression. Sediment input to the basin was influenced by stable areas occupied by granitic plutons on either side of the basin and a southward downthrowing fault along its northern margin. The drainage direction was principally controlled by E-W trending within-basin faults and an E-W trending stable area located to the south. The basin was fundamentally of the axial transport type, the main drainage having been directed towards the east though there was also a strong lateral influx from the north, northwest and northeast. Stable areas around the, basin periphery resulted in either no sediment preservation or sequences of multistorey channel deposits while thick sequences dominated by fine-grained floodplain or overbank deposits characterized areas of higher subsidence rate within the basin. Movement on the northern basin-margin fault was probably the major cause of the first fluvial influx, while regional subsidence of the basin and its northern periphery resulted in the second influx. The third influx was a response to local subsidence in the southern part of the Munster Basin. This also contributed to the simultaneous westward marine transgression in this area towards the end of the Devonian. Source area denudation and retreat in association with a sea-level rise were ultimately responsible for terminating the alluvial regime in the Munster Basin.