共查询到18条相似文献,搜索用时 125 毫秒
1.
2.
3.
摘要:论文对带有高PF(功率因素)反激式的开关电源的电磁干扰进行了分析。为实现开关电源的EMC(电磁兼容),在设计过程中采用了EMI滤波器。论文在探讨EMI滤波器的设计原则基础上,分析了高频分布参数对滤波器频率特性的影响,通过设计和调整滤波器的结构及器件参数,实现了EMI传导干扰的有效抑制,使带有高PF反激式的开关电源达到灯具的EMI标准。 相似文献
4.
5.
6.
EMI电源滤波器的设计探讨 总被引:1,自引:0,他引:1
电源EMI滤波器是一种抑制传导发射和辐射发射非常有效的方法.分析了电源线上的干扰类型,开关电源产生EMI的原理及其拓扑结构.讨论了电源EMI滤波器的设计和器件选取原则,并提出有关安装电源EMI滤波器时应注意的几个问题. 相似文献
7.
8.
高频开关电源EMC设计 总被引:3,自引:0,他引:3
介绍了我国和欧洲开关电源的电磁兼容标准,针对高频开关电源的工作特点,着重探讨了电磁脉冲设计、电源印制板EMC设计、EMI电源滤波器的设计和屏蔽等电磁干扰抑制方法,通过这些方法的实施,确保高频开关电源满足CISPR22 B级标准的要求. 相似文献
9.
共模扼流圈是EMI滤波器的关键组件,主要用于传导干扰中的共模电流抑制。为了便于EMI滤波器抗干扰特性的仿真研究,提出了一种共模扼流圈的高频特性建模方法。首先,利用矢量网络分析仪测量共模扼流圈的共模与差模阻抗数据。然后,使用自组织迁移算法分频段处理共模扼流圈的阻抗数据,提取出仿真模型的RLC参数,结果表明利用算法分频段处理阻抗数据的方法,既使得所建立高频模型具有较高的精确度,也降低了对高性能计算机需求。最后,对一款共模扼流圈高频特性进行了建模,并通过仿真与实测的阻抗数据对比,验证了建模方法的有效性,为EMI滤波器的仿真与设计提供了参考。 相似文献
10.
开关电源电磁干扰滤波器插入损耗的研究 总被引:1,自引:0,他引:1
研究了电磁干扰(EMI)滤波器的共模和差模插入损耗(IL),并进行理论分析和测量;分析了影响IL的各种原因及改进方法。最后,测量了EMI滤波器插入损耗,为了检验EMI滤波器对开关电源的电流(电压)谐波的抑制效果,测量了开关电源的电流(电压)谐波分量,列出了测量数据,并对测量结果进行分析,总结出开关电源传导干扰的特点。测量结果验证了理论计算和分析的正确性。 相似文献
11.
Rengang Chen van Wyk J.D. Shuo Wang Odendaal W.G. 《Power Electronics, IEEE Transactions on》2005,20(3):611-619
Discrete electromagnetic interference (EMI) filters have been used for power electronics converters to attenuate switching noise and meet EMI standards for many years. Because of the unavoidable structural parasitic parameters of the discrete filter components, such as equivalent parallel capacitance (EPC) of inductors and equivalent series inductance (ESL) of capacitors, the effective frequency range of the discrete filter is normally limited. Aiming at improving high frequency performance and reducing size and profile, the integrated EMI filter structure has been proposed based on advanced integration and packaging technologies , . Some improvements have been made but further progress is limited by EPCs of the filter inductors, which is restricted by dimension, size and physical structure. In this paper, a new structural winding capacitance cancellation method for inductors is proposed. Other than trying to reduce EPCs, a conductive ground layer is embedded in the planar inductor windings and the structural capacitance between the inductor winding and this embedded layer is utilized to cancel the parasitic winding capacitance. In order to obtain the best cancellation effect, the structural winding capacitance model of the planar spiral winding structure is given and the equivalent circuit is derived. The design methodology of the layout and area of the embedded ground layer is presented. Applying this method, an improved integrated EMI filter is designed and constructed. The experimental results show that the embedded conductive layer can effectively cancel the parasitic winding capacitance, hence ideal inductor characteristics can be obtained. With the help of this embedded conductive layer, the improved EMI filter has much smaller volume and profile and much better characteristics over a wide frequency range, compared to the former integrated EMI filter and the discrete EMI filter. 相似文献
12.
针对飞机直流270 V至直流28 V电源变换器的应用需求,分析了电源变换器输入端的传导及辐射电磁干扰源.通过对电源变换器的电磁干扰(electromagnetic interference,EMI)频谱进行分析,确定了滤波器的参数.为了抑制滤波器振荡,提出在差模电感两端并联电阻电感网络的方法,替代使用液态铝电容的传统方法,提升滤波器的可靠性.根据差模电感中电流直流分量远高于交流分量的特点,提出采用扁铜漆包线来实现绕组的方法,使差模电感的体积降低.根据锰锌铁氧体低频磁导率高,镍锌铁氧体高频磁导率稳定的特点,提出双磁芯共模电感的设计方法,实现共模电感宽频率和小体积.实测结果证明输入电磁干扰滤波器可使电源变换器符合GJB 151中CE102要求. 相似文献
13.
电力电子设备产生的电磁干扰都会超过可接受的水平,所以要利用滤波电路降低他们产生的EMI,这些滤波电路由串联扼流圈和并联电容器构成低通滤波器,文章对EMI滤波元件的高频特性进行分析,给出了电容、电感、电阻等的高频特性、等效电路以及仿真曲线。得出的结论体现出与工频下不同的特性,对滤波设计有重要指导意义。 相似文献
14.
15.
16.
17.
18.
开关电源工作在高频开关状态下,是电子设备主要的电磁干扰源.从麦克斯韦方程出发,分析了开关电源产生电磁干扰(EMI)的主要原因.介绍了开关电源传统的驱动电路及解决EMI的方法,提出了一种结构新颖的驱动电路.该电路不仅具有功率管开启时间不随其输入电容变化的优点,而且采用两段式的方法关闭功率管,有效减缓了di/dt和dv/d... 相似文献