CoFe2O4@SiO2‐CPTES‐Guanidine‐Cu(II): A novel and reusable nanocatalyst for the synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones and polyhydroquinolines and oxidation of sulfides

CoFe₂O₄@SiO₂‐CPTES‐Guanidine‐Cu(II) magnetic nanoparticles were synthesized and used as a new, inexpensive and efficient heterogeneous catalyst for the synthesis of polyhydroquinolines and 2,3‐dihydroquinazoline‐4(1H)‐ones and for the oxidation of sulfides. The structure of this nanocatalyst was characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, vibrating sample magnetometry, thermogravimetric analysis, X‐ray diffraction and inductively coupled plasma optical emission spectrometry. Simple preparation, high catalytic activity, simple operation, high yields, use of green solvents, easy magnetic separation and reusability of the catalyst are some of the advantages of this protocol.     

The immobilized Ni(II)‐thiourea complex on silica‐layered copper ferrite: A novel and reusable nanocatalyst for one‐pot reductive‐acetylation of nitroarenes

In this study, magnetically nanoparticles of CuFe₂O₄@SiO₂@PTMS@Tu@Ni(II) as novel and reusable catalyst were prepared. Synthesis of the Ni (II)‐nanocatalyst was carried out through the complexation of Ni(OAc)₂·4H₂O with the immobilized thiourea on silica‐layered CuFe₂O₄. The prepared nanocomposite system was then characterized using SEM, EDX, XRD, VSM, ICP‐OES, Raman, UV–Vis and FT‐IR analyses. Catalytic activity of the Ni(II)‐CuFe₂O₄ system was investigated towards rapid reduction of aromatic nitro compounds to arylamines with sodium borohydride as well as one‐pot reductive‐acetylation of nitroarenes to acetanilides with NaBH₄/Ac₂O system without the isolation of intermediate arylamines. All reactions were carried out in H₂O within 3–7 min to afford the products arylamines/acetanilides in high to excellent yields. Reusability of the Ni(II)‐nanocatalyst was examined for seven consecutive cycles without the significant loss of the catalytic activity.     

Fe3O4@SiO2–ZrCl2‐MNPs: A novel magnetic catalyst for the clean and efficient cascade synthesis of 1‐(benzothiazolylamino)methyl‐2‐naphthol derivatives in the absence of solvent

A green, simple and eco‐friendly three‐component condensation for the synthesis of 1‐(benzothiazolylamino)methyl‐2‐naphthols using new magnetic nanoparticles formulated as Fe₃O₄@SiO₂–ZrCl₂‐MNPs is described. Considering the economic and environmental aspects, the method provides some advantages such as clean procedure, solvent‐free conditions, simple operation and work‐up, relatively short reaction times and high yields of the products. Moreover the introduced catalyst can be readily recovered up to 4 consecutive runs with consistent activity using an external magnet.     

Preparation of novel palladium nanoparticles supported on magnetic iron oxide and their catalytic application in the synthesis of 2‐imino‐3‐phenyl‐2,3‐dihydrobenzo[d]oxazol‐5‐ols

Novel Pd nanoparticles were prepared in five successive stages: 1) preparation of the Fe₃O₄ magnetic nanoparticles (Fe₃O₄ MNPs), 2) coating of Fe₃O₄ MNPs with SiO₂ (Fe₃O₄@SiO₂), 3) functionalization of Fe₃O₄@SiO₂ with 3‐chloropropyltrimethoxy‐ silane (CPTMS) ligand (Fe₃O₄@SiO₂@CPTMS), 4) further functionalization with 3,5‐diamino‐1,2,4‐triazole (DAT) ligand (Fe₃O₄@SiO₂@CPTMS @DAT), and 5) the complexation of Fe₃O₄@SiO₂@CPTMS@DAT with PdCl₂ (Fe₃O₄@SiO₂@CPTMS@ DAT@Pd). Then, the obtained Pd nano‐catalyst characterized by different methods such as the elemental analysis (CHN), FT‐IR, XRD, EDX, SEM, TEM, TG‐DTA and VSM. Finally, the Pd catalyst was applied for the synthesis of various 2‐imino‐3‐phenyl‐2,3‐dihydrobenzo[d]oxazol‐5‐ols.     

Preparation and characterization of Fe3O4@SiO2/APTPOSS core–shell composite nanomagnetics as a novel family of reusable catalysts and their application in the one‐pot synthesis of 1,3‐thiazolidin‐4‐one derivatives

Octakis[3‐(3‐aminopropyltriethoxysilane)propyl]octasilsesquioxane (APTPOSS) as a polyhedral oligomeric silsesquioxane derivative was prepared and used as a pioneer reagent to obtain a novel core–shell composite using magnetic iron oxide nanoparticles as the core and the inorganic–organic hybrid polyhedral oligomeric silsesquioxane as the shell. Fe₃O₄@SiO₂/APTPOSS were confirmed using Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive spectroscopy, dynamic light scattering, thermogravimetric analysis, X‐ray diffraction and vibrating sample magnetometry. The inorganic–organic hybrid polyhedral oligomeric silsesquioxane magnetic nanoparticles were used as an efficient new heterogeneous catalyst for the one‐pot three‐component synthesis of 1,3‐thiazolidin‐4‐ones under solvent‐free conditions. Moreover, these nanoparticles could be easily separated using an external magnet and then reused several times without significant loss of catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis of the first nanomagnetic particles with semicarbazide‐based acidic ionic liquid tag: an efficient catalyst for the synthesis of 3,3′‐(arylmethylene)bis(4‐hydroxycoumarin) and 1‐carbamato‐alkyl‐2‐naphthol derivatives under mild and green conditions

Semicarbazide functionalized with chlorosulfonic acid on the surface of silica‐coated magnetic nanoparticles, {Fe₃O₄@SiO₂@(CH₂)₃Semicarbazide‐SO₃H/HCl}, as a novel magnetic Brønsted acid catalyst according to the aims of green chemistry was synthesized and fully characterized using Fourier transform infrared, UV–visible and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, scanning electron, transmission electron and atomic force microscopies and thermogravimetric analysis. The capability and excellent activity of this nanoparticle catalyst were exhibited in the synthesis of two series of compounds with important biological activities, namely 3,3′‐(arylmethylene)bis(4‐hydroxycoumarin) and 1‐carbamato‐alkyl‐2‐naphthol derivatives, under mild, green and solvent‐free conditions. To the best of our knowledge, this is the first study of the synthesis and application of {Fe₃O₄@SiO₂@(CH₂)₃Semicarbazide‐SO₃H/HCl} as Brønsted acid solid magnetic nanoparticles. Consequently the present study can open up a novel and promising intuition in the sequence of logical design, synthesis and applications of task‐specific Brønsted acid magnetic nanoparticle catalyst with favourable properties as a full‐fledged efficient material for sustainable approaches. Copyright © 2016 John Wiley & Sons, Ltd.     

One‐pot synthesis of 1‐ and 5‐substituted 1H‐tetrazoles using 1,4‐dihydroxyanthraquinone–copper(II) supported on superparamagnetic Fe3O4@SiO2 magnetic porous nanospheres as a recyclable catalyst

An effective one‐pot, convenient process for the synthesis of 1‐ and 5‐substituted 1H‐tetrazoles from nitriles and amines is described using1,4‐dihydroxyanthraquinone–copper(II) supported on Fe₃O₄@SiO₂ magnetic porous nanospheres as a novel recyclable catalyst. The application of this catalyst allows the synthesis of a variety of tetrazoles in good to excellent yields. The preparation of the magnetic nanocatalyst with core–shell structure is presented by using nano‐Fe₃O₄ as the core, tetraethoxysilane as the silica source and poly(vinyl alcohol) as the surfactant, and then Fe₃O₄@SiO₂ was coated with 1,4‐dihydroxyanthraquinone–copper(II) nanoparticles. The new catalyst was characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, transmission electron microscopy, field emission scanning electron microscopy, dynamic light scattering, thermogravimetric analysis, vibration sample magnetometry, X‐ray photoelectron spectroscopy, nitrogen adsorption–desorption isotherm analysis and inductively coupled plasma analysis. This new procedure offers several advantages such as short reaction times, excellent yields, operational simplicity, practicability and applicability to various substrates and absence of any tedious workup or purification. In addition, the excellent catalytic performance, thermal stability and separation of the catalyst make it a good heterogeneous system and a useful alternative to other heterogeneous catalysts. Also, the catalyst could be magnetically separated and reused six times without significant loss of catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis of a highly active amino‐functionalized Fe3O4@SiO2/APTS/Ru magnetic nanocomposite catalyst for hydrogenation reactions

An amino‐functionalized silica‐coated Fe₃O₄ nanocomposite (Fe₃O₄@SiO₂/APTS) was synthesized. The Fe₃O₄@SiO₂ microspheres possessed a well‐defined core–shell structure, uniform sizes and high magnetization. An immobilized ruthenium nanoparticle catalyst (Fe₃O₄@SiO₂/APTS/Ru) was obtained after coordination and reduction of Ru³⁺ on the Fe₃O₄@SiO₂/APTS nanocomposite. The Ru nanoparticles were not only ultra‐small with nearly monodisperse sizes but also had strong affinity with the surface of Fe₃O₄@SiO₂/APTS. The obtained catalyst exhibited excellent catalytic performance for the hydrogenation of a variety of aromatic nitro compounds, even at room temperature. Moreover, Fe₃O₄@SiO₂/APTS/Ru was easily recovered using a magnetic field and directly reused for at least five cycles without significant loss of its activity.     

Ferrocene‐tagged ionic liquid stabilized on silica‐coated magnetic nanoparticles: Efficient catalyst for the synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions

An advanced novel magnetic ionic liquid based on imidazolium tagged with ferrocene, a supported ionic liquid, is introduced as a recyclable heterogeneous catalyst. Catalytic activity of the novel nanocatalyst was investigated in one‐pot three‐component reactions of various aldehydes, malononitrile and 2‐naphthol for the facile synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions without additional co‐catalyst or additive in air. For this purpose, we firstly synthesized and investigated 1‐(4‐ferrocenylbutyl)‐3‐methylimidazolium acetate, [FcBuMeIm][OAc], as a novel basic ferrocene‐tagged ionic liquid. This ferrocene‐tagged ionic liquid was then linked to silica‐coated nano‐Fe₃O₄ to afford a novel heterogeneous magnetic nanocatalyst, namely [Fe₃O₄@SiO₂@Im‐Fc][OAc]. The synthesized novel catalyst was characterized using ¹H NMR, ¹³C NMR, Fourier transform infrared and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, and transmission and field emission scanning electron microscopies. Combination of some unique characteristics of ferrocene and the supported ionic liquid developed the catalytic activity in a simple, efficient, green and eco‐friendly protocol. The catalyst could be reused several times without loss of activity.     

Butane‐1‐sulfonic acid immobilized on magnetic Fe3O4@SiO2 nanoparticles: A novel and heterogeneous catalyst for the one‐pot synthesis of barbituric acid and pyrano[2,3‐d] pyrimidine derivatives in aqueous media

Butane‐1‐sulfonic acid immobilized on magnetic Fe₃O₄@SiO₂ nanoparticles (Fe₃O₄@SiO₂‐Sultone) was easily prepared via direct ring opening of 1,4‐butanesultone with nanomagnetic Fe₃O₄@SiO₂. The prepared reagent was characterized and used for the efficient promotion of the synthesis of barbituric acid and pyrano[2,3‐d] pyrimidine derivatives. All reactions were performed under mild and completely heterogeneous reaction conditions affording products in good to high yields. The catalyst is easily isolated from the reaction mixture by magnetic decantation and can be reused at least eight times without significant loss in activity.     

ZnCl2 supported on Fe3O4@SiO2 core–shell nanocatalyst for the synthesis of quinolines via Friedländer synthesis under solvent‐free condition

A magnetic nanocatalyst of Fe₃O₄@SiO₂/ZnCl₂ was prepared by supporting ZnCl₂ on silica‐coated magnetic nanoparticles of Fe₃O₄. This recoverable catalyst was used for the synthesis of quinolines via Friedländer synthesis from 2‐aminoaryl ketones and α‐methylene ketones under solvent‐free condition. The prepared catalyst was characterized by FT‐IR, TEM, SEM, XRD, EDX, ICP‐OES, VSM and BET. It was found that Fe₃O₄@SiO₂/ZnCl₂ showed higher catalytic activity than homogenous ZnCl₂, and could be reused several times without significant loss of activity.     

Eco‐friendly synthesis of 3,4‐dihydroquinoxalin‐2‐amine,diazepine‐tetrazole and benzodiazepine‐2‐carboxamide derivatives with the aid of MCM‐48/H5PW10V2O40

A heterogeneous material composed of MCM‐48/H₅PW₁₀V₂O₄₀ was produced and used as an efficient, eco‐friendly and highly recyclable catalyst for the one‐pot and multicomponent synthesis of 3,4‐dihydroquinoxalin‐2‐amine, diazepine‐tetrazole and benzodiazepine‐2‐carboxamide derivatives in aqueous media and at room temperature with high yields in short reaction times (40–60 min). The recoverable catalyst was easily recycled at least five times without any loss of catalytic activity. The structures of obtained products were confirmed using ¹H NMR and ¹³C NMR spectra.     

Cu(II)‐supported graphene quantum dots modified NiFe2O4: A green and efficient catalyst for the synthesis of 4H‐pyrimido[2,1‐b]benzothiazoles in water

NiFe₂O₄ nanoparticles are modified by graphene quantum dots (GQDs) and utilized to stabilize the Cu(II) nanoparticles as a novel magnetically retrievable catalytic system (Cu(II)/GQDs/NiFe₂O₄) for green formation of 4H‐pyrimido[2,1‐b]benzothiazoles. The prepared catalyst can be isolated assisted by an outer magnet and recovered for five courses without significant reduction in its efficiency. The as‐prepared magnetic heterogeneous nanocomposite was characterized by UV–Vis, FT‐IR, XRD, EDS, VSM, TEM, and ICP. Performing the reactions in environmentally friendly and affordable conditions (water), the low catalyst percentage, high yield of products, short reaction times, and easy workup are the merits of this protocol.     

Gallic acid grafted to amine‐functionalized magnetic nanoparticles as a proficient catalyst for environmentally friendly synthesis of α‐aminonitriles

An effective approach of one‐pot catalytic Strecker reaction between aromatic aldehydes, aniline or toluidine and trimethylsilyl cyanide in the presence of amine‐functionalized Fe₃O₄@SiO₂ nanoparticles grafted with gallic acid (GA) as a powerful catalyst was developed. The fabricated reusable catalyst demonstrated high efficiency in the synthesis of α‐aminonitriles along with facile work‐up procedure. Fe₃O₄@SiO₂‐NH₂‐GA was characterized by Fourier transform‐infrared spectroscopy, scanning electron microscopy image, vibrating‐sample magnetometer curve, energy‐dispersive X‐ray analysis and thermogravimetric analysis.     

Fe3O4@SiO2@l‐arginine@Pd(0): a new magnetically retrievable heterogeneous nanocatalyst with high efficiency for C–C bond formation

The surface of Fe₃O₄@SiO₂ nanoparticles was modified using l ‐arginine as a green and available amino acid to trap palladium nanoparticles through a strong interaction between the metal nanoparticles and functional groups of the amino acid. The proposed green synthetic method takes advantage of nontoxic reagents through a simple procedure. Characterization of Fe₃O₄@SiO₂@l ‐arginine@Pd(0) was done using Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, X‐ray diffraction, vibrating sample magnetometry and inductively coupled plasma analysis. The catalytic activity of Fe₃O₄@SiO₂@l ‐arginine@Pd(0) as a new nanocatalyst was investigated in C – C coupling reactions. Waste‐free, use of green medium, efficient synthesis leading to high yield of products, eco‐friendly and economic catalyst, excellent reusability of the nanocatalyst and short reaction time are the main advantages of the method presented. Copyright © 2016 John Wiley & Sons, Ltd.     

Green synthesis of Fe3O4@SiO2‐Ag magnetic nanocatalyst using safflower extract and its application as recoverable catalyst for reduction of dye pollutants in water

This paper reports the green and in situ preparation of Fe₃O₄@SiO₂‐Ag magnetic nanocatalyst synthesized using safflower (Carthamus tinctorius L.) flower extract without the addition of any stabilizers or surfactants. The catalytic performance of the resulting nanocatalyst was examined for the reduction of 4‐nitrophenol (4‐NP), methylene blue (MB) and methyl orange (MO) in an environment‐friendly medium at room temperature. The main factors such as pH, temperature and amount of catalyst influencing the nanocatalyst performance were studied. The apparent rate constants for 4‐NP, MO and MB reduction were calculated, being 0.756 min^?1, 0.064 s^?1 and 0.09 s^?1, respectively. The catalyst was recovered using an external magnet and reused several times with negligible loss of catalytic activity. The as‐synthesized nanoparticles were characterized using powder X‐ray diffraction, transmission electron microscopy, UV–visible, Fourier transform infrared and inductively coupled plasma atomic emission spectroscopies, dynamic light scattering and vibrating sample magnetometry.     

Comparison of Cadmium Cd2+ and Lead Pb2+ Binding by Fe2O3@SiO2‐EDTA Nanoparticles – Binding Stability and Kinetic Studies

This study describes the synthesis and characterization of ethylenediaminetetraacetic acid (EDTA) functionalized magnetic nanoparticles of 20 nm in size – Fe₃O₄@SiO₂‐EDTA – which were used as a novel magnetic adsorbent for Cd(II) and Pb(II) binding in aqueous medium. These nanoparticles were obtained in two‐stage synthesis: covering by tetraethyl orthosilicate and functionalization with EDTA derivatives. Nanoparticles were characterized using TEM, FT‐IR, and XPS methods. Metal ions were detected under optimized experimental conditions using Differential Pulse Anodic Stripping Voltammetry (DPASV) and Hanging Mercury Drop Electrode (HDME) techniques. We compared the ability of Fe₃O₄@SiO₂‐EDTA to bind cadmium and lead in concentration of 553.9 μg L^?1 and 647.5 μg L^?1, respectively. Obtained results show that the adsorption rate of cadmium binding was very high. The equilibrium for Fe₃O₄@SiO₂‐EDTA‐Cd(II) was reached within 19 min while for the Fe₃O₄@SiO₂‐EDTA‐Pb(II) was reached within 25 minutes. About 2 mg of nanoparticles was enough to bind 87.5 % Cd(II) and 54.1 % Pb(II) content. In the next step the binding capacity of Fe₃O₄@SiO₂‐EDTA nanoparticles was determined. Only 1.265 mg of Fe₃O₄@SiO₂‐EDTA was enough to bind 96.14 % cadmium ions while 5.080 mg of nanoparticles bound 40.83 % lead ions. This phenomenon proves that the studied nanoparticles bind Cd(II) much better than Pb(II). The cadmium ions binding capacity of Fe₃O₄@SiO₂‐EDTA nanoparticles decreased during storage in 0.5 M KCl solution. Two days of Fe₃O₄@SiO₂‐EDTA storage in KCl solution caused the 32 % increase in the amount of nanoparticles required to bind 60 % of cadmium while eight‐days storage caused further increase to 328 %. The performed experiment confirmed that the storage of nanoparticles in solution without any surfactants reduced their binding capacity. The best binding capacity was observed for the nanoparticles prepared directly before the electrochemical measurements.     

Nano‐Fe3O4@SiO2‐SO3H: A magnetic,reusable solid‐acid catalyst for solvent‐free reduction of oximes to amines with the NaBH3CN/ZrCl4 system

In this study, the immobilization of sulfonic acid on silica‐layered magnetite was carried out by the reaction of ClSO₃H with silica‐layered magnetite. The prepared magnetic nanoparticles of Fe₃O₄@SiO₂‐SO₃H were then characterized using scanning electron microscopy, energy dispersive X‐ray spectroscopy, X‐ray diffraction, Fourier transform infrared spectroscopy, vibrating sample magnetometry, and transmission electron microscopy. The sulfonated nanocomposite exhibited excellent catalytic activity and reusability in the reduction of various aldoximes and ketoximes with NaBH₃CN in the presence of ZrCl₄. All reactions were carried out under solvent‐free conditions (r.t. or 75–80°C) within 3–70 min to afford amines in high to excellent yields.     

Catalytic synthesis of cyclic carbonates from epoxides and carbon dioxide by magnetic UiO‐66 under mild conditions

The catalytic activity of UiO‐66@Fe₃O₄@SiO₂ catalyst was investigated in the fixation of carbon dioxide with epoxides under mild conditions. In this manner, a facile magnetization of UiO‐66 was achieved simultaneously by simply mixing this metal–organic framework and silica‐coated Fe₃O₄ nanoparticles in solution under sonication. The prepared catalyst was characterized using Fourier transform infrared and UV–visible spectroscopies, X‐ray diffraction, transmission and field emission scanning electron microscopies, N₂ adsorption and inductively coupled plasma atomic emission spectroscopy. This new heterogeneous catalyst was applied as a highly efficient catalyst in the coupling of carbon dioxide with epoxides at mild temperatures and pressures. Furthermore, it could be easily recovered with the assistance of an external magnetic field and reused three consecutive times without significant loss of activity and mass.     

Fe3O4@SiO2@sulfated boric acid as superparamagnetic and recyclable nanocatalyst‐assisted,one‐pot,pseudo four‐component synthesis of 5‐amino‐2‐aryl‐3H‐chromeno[4,3,2‐de][1,6]naphthyridine‐4‐carbonitrile derivatives

The catalytic performance of the superparamagnetic nanocatalyst Fe₃O₄@SiO₂@Sulfated boric acid as a green, recyclable, and acidic solid catalyst in the synthesis of chromeno[4,3,2‐de][1,6]naphthyridine derivatives has been studied. Chromeno[4,3,2‐de][1,6]naphthyridine derivatives via a pseudo four‐component reaction from aromatic aldehydes (1 mmol), malononitrile (2 mmol), and 2′‐hydroxyacetophenone in the presence of Fe₃O₄@SiO₂@Sulfated boric acid (0.004 g) as a nanocatalyst in 3 mL of water as a green solvent at 80°C has been synthesized. The advantages of this method are higher product yields in shorter reaction times, easy recyclability and reusability of the catalyst, and easy work‐up procedures. The nanocatalyst was reused at least six times. The nanocatalyst retained its stability in the reaction, and after reusability, it was separated easily from the reaction by an external magnet.