Low‐cycle fatigue life prediction of various metallic materials under multiaxial loading

This paper proposed a simple life prediction model for assessing fatigue lives of metallic materials subjected to multiaxial low‐cycle fatigue (LCF) loading. This proposed model consists of the maximum shear strain range, the normal strain range and the maximum normal stress on the maximum shear strain range plane. Additional cyclic hardening developed during non‐proportional loading is included in the normal stress and strain terms. A computer‐based procedure for multiaxial fatigue life prediction incorporating critical plane damage parameters is presented as well. The accuracy and reliability of the proposed model are systematically checked by using about 300 test data through testing nine kinds of material under both zero and non‐zero mean stress multiaxial loading paths.     

Prediction methods of fatigue critical point for notched components under multiaxial fatigue loading

Two methods based on local stress responses are proposed to locate fatigue critical point of metallic notched components under non‐proportional loading. The points on the notch edge maintain a state of uniaxial stress even when the far‐field fatigue loading is multiaxial. The point bearing the maximum stress amplitude is recognized as fatigue critical point under the condition of non‐mean stress; otherwise, the Goodman's empirical formula is adopted to amend mean stress effect prior to the determination of fatigue critical point. Furthermore, the uniaxial stress state can be treated as a special multiaxial stress state. The Susmel's fatigue damage parameter is employed to evaluate the fatigue damage of these points on the notch edge. Multiaxial fatigue tests on thin‐walled round tube notched specimens made of GH4169 nickel‐base alloy and 2297 aluminium‐lithium alloy are carried out to verify the two methods. The prediction results show that both the stress amplitude method and the Susmel's parameter method can accurately locate the fatigue critical point of metallic notched components under multiaxial fatigue loading.     

Multiaxial low‐cycle fatigue life evaluation under different non‐proportional loading paths

This paper presents analytical and experimental investigations for fatigue lives of structures under uniaxial, torsional, multiaxial proportional, and non‐proportional loading conditions. It is known that the rotation of principal stress/strain axes and material additional hardening due to non‐proportionality of cycle loading are the 2 main causes resulting in shorter fatigue lives compared with those under proportional loading. This paper treats these 2 causes as independent factors influencing multiaxial fatigue damage and proposes a new non‐proportional influencing parameter to consider their combined effects on the fatigue lives of structures. A critical plane model for multiaxial fatigue lives prediction is also proposed by using the proposed non‐proportional influencing factor to modify the Fatemi‐Socie model. The comparison between experiment results and theoretical evaluation shows that the proposed model can effectively predict the fatigue life due to multiaxial non‐proportional loading.     

Proportional/nonproportional constant/variable amplitude multiaxial notch fatigue: cyclic plasticity,non‐zero mean stresses,and critical distance/plane

This paper deals with the formulation and experimental validation of a novel fatigue lifetime estimation technique suitable for assessing the extent of damage in notched metallic materials subjected to in‐service proportional/nonproportional constant/variable amplitude multiaxial load histories. The methodology being formulated makes use of the Modified Manson‐Coffin Curve Method, the Shear Strain–Maximum Variance Method, and the elasto‐plastic Theory of Critical Distances, with the latter theory being applied in the form of the Point Method. The accuracy and reliability of our novel fatigue lifetime estimation technique were checked against a large number of experimental results we generated by testing, under proportional/nonproportional constant/variable amplitude axial‐torsional loading, V‐notched cylindrical specimens made of unalloyed medium‐carbon steel En8 (080M40). Specific experimental trials were run to investigate also the effect of non‐zero mean stresses as well as of different frequencies between the axial and torsional stress/strain components. This systematic validation exercise allowed us to demonstrate that our novel multiaxial fatigue assessment methodology is remarkably accurate, with the estimates falling within an error factor of 2. By modelling the cyclic elasto‐plastic behaviour of metals explicitly, the design methodology being formulated and validated in the present paper offers a complete solution to the problem of estimating multiaxial fatigue lifetime of notched metallic materials, with this holding true independently of sharpness of the stress/strain raiser and complexity of the load history.     

Corrosion fatigue behaviour of 304 stainless steel under proportional and non‐proportional multiaxial loading condition

Corrosion fatigue and electrochemical tests under proportional loading and non‐proportional loading were conducted on 304 stainless steel in 0.63 mol L^?1 NaCl solution at room temperature. Two biaxial loading paths were applied to study the effect of proportional loading and non‐proportional loading on corrosion fatigue behaviour. Surface and fractographic observations of multiaxial corrosion fatigue specimens were carried out by scanning electron microscopy. It was shown that proportional loading had a more significant effect on the occurrence of local corrosion compared with non‐proportional loading because the continuous rotation of the principal stress plane under non‐proportional loading inhibits the pit formation.     

A critical plane‐energy model for multiaxial fatigue life prediction

A new critical plane‐energy model is proposed in this paper for multiaxial fatigue life prediction of metals. A brief review of existing methods, especially on the critical plane‐based and energy‐based methods, is given first. Special focus is on the Liu–Mahadevan critical plane approach, which has been shown to work for both brittle and ductile metals. One potential drawback of the Liu–Mahadevan model is that it needs an empirical calibration parameter for non‐proportional multiaxial loadings because only the strain terms are used and the out‐of‐phase hardening cannot be explicitly considered. An energy‐based model using the Liu–Mahadevan concept is proposed with the help of the Mróz–Garud plasticity model. Thus, the empirical calibration for non‐proportional loading is not needed because the out‐of‐phase hardening is naturally included in the stress calculation. The model predictions are compared with experimental data from open literature, and the proposed model is shown to work for both proportional and non‐proportional multiaxial loadings without the empirical calibration.     

Fatigue assessment of laserbeam‐welded aluminium joints under multiaxial loading

This paper presents the results and evaluation of the multiaxial fatigue behaviour of laserbeam‐welded overlapped tubular joints made from the artificially hardened aluminium alloy AlSi1MgMn T6 (EN AW 6082 T6) under multiaxial loadings with constant and variable amplitudes. Several fatigue test series under pure axial and pure torsional loadings as well as combined axial and torsional proportional and non‐proportional loadings have been carried out in the range of 2·10⁴ to 2·10⁷ cycles. The assessment of the investigated thin‐walled joints is based on a local notch stress concept. In this concept the fatigue critical area of the weld root is substituted by a fictitious notch radius r_ref = 0.05 mm. The equivalent stresses in the notch, considering especially the fatigue life reducing influence of non‐proportional loading in comparison to proportional loading, were calculated by a recently developed hypothesis, which is called the Stress Space Curve Hypothesis (SSCH). This hypothesis is based on the time evolution of the stress state during one load cycle. In addition, the fatigue strength evaluation of multiaxial spectrum loading was carried out using a modified Gough‐Pollard algorithm.     

Multiaxial notch fatigue life prediction based on the dominated loading control mode under variable amplitude loading

A new calculation approach is suggested to the fatigue life evaluation of notched specimens under multiaxial variable amplitude loading. Within this suggested approach, if the computed uniaxial fatigue damage by the pure torsional loading path is larger than that by the axial tension–compression loading path, a shear strain‐based multiaxial fatigue damage parameter is assigned to calculate multiaxial fatigue damage; otherwise, an axial strain‐based multiaxial fatigue damage parameter is assigned to calculate multiaxial fatigue damage. Furthermore, the presented method employs shear strain‐based and axial strain‐based multiaxial fatigue damage parameters in substitution of equivalent strain amplitude to consider the influence of nonproportional additional hardening. The experimental data of GH4169 superalloy and 7050‐T7451 aluminium alloy notched components are used to illustrate the presented multiaxial fatigue lifetime estimation approach for notched components, and the results reveal that estimations are accurate.     

Biaxial fatigue for proportional and non‐proportional loading paths

In order to study the use of a local approach to predict crack‐initiation life on notches in mechanical components under multiaxial fatigue conditions, the study of the local cyclic elasto‐plastic behaviour and the selection of an appropriate multiaxial fatigue model are essential steps in fatigue‐life prediction. The evolution of stress–strain fields from the initial state to the stabilized state depends on the material type, loading amplitude and loading paths. A series of biaxial tension–compression tests with static or cyclic torsion were carried out on a biaxial servo‐hydraulic testing machine. Specimens were made of an alloy steel 42CrMo4 quenched and tempered. The shear stress relaxations of the cyclic tension–compression with a steady torsion angle were observed for various loading levels. Finite element analyses were used to simulate the cyclic behaviour and good agreement was found. Based on the local stabilized cyclic elastic–plastic stress–strain responses, the strain‐based multiaxial fatigue damage parameters were applied and correlated with the experimentally obtained lives. As a comparison, a stress‐invariant‐based approach with the minimum circumscribed ellipse (MCE) approach for evaluating the effective shear stress amplitude was also applied for fatigue life prediction. The comparison showed that both the equivalent strain range and the stress‐invariant parameter with non‐proportional factors correlated well with the experimental results obtained in this study.     

Comparative study on biaxial low-cycle fatigue behaviour of three structural steels

In this study the uniaxial/biaxial low‐cycle fatigue behaviour of three structural steels (Ck45 normalized steel, 42CrMo4 quenched and tempered steel and AISI 303 stainless steel) are studied, evaluated and compared. Two parameters are considered for estimating non‐proportional fatigue lives: the coefficient of additional hardening and the factor of non‐proportionality. A series of tests of uniaxial/biaxial low‐cycle fatigue composed of tension/compression with cyclic torsion were carried out on a biaxial servo‐hydraulic testing machine. Several loading paths were carried out, including proportional and non‐proportional ones, in order to verify the additional hardening caused by different loading paths. The experiments showed that the three materials studied have very different additional hardening behaviour. Generally, the transient process from the initial loading cycle to stabilized loading cycle occurs in a few cycles. The stabilized cyclic stress/strain parameters are controlling parameters for fatigue damage. A factor of non‐proportionality of the loading paths is evaluated based on the Minimum Circumscribed Ellipse approach. It is shown that the microstructure has a great influence on the additional hardening and the hardening effect is dependent on the loading path and also the intensity of the loading.     

Non-proportional multiaxial whole-life transformation ratchetting and fatigue failure of super-elastic NiTi shape memory alloy micro-tubes

Experimental observations are performed to investigate the non-proportional multiaxial whole-life transformation ratchetting and fatigue failure of superelastic NiTi SMA micro-tubes in stress-controlled loadings at human-body temperature (310 K). The effects of axial mean stress and stress hold on the whole-life transformation ratchetting and fatigue life are investigated with uniaxial, torsional and five different multiaxial loading paths. The results show that the stress holds on the upper or lower transformation plateaus will both promote forward and reverse transformation, and lead to shorter fatigue life. The multiaxial fatigue lives of NiTi shape memory alloy depend significantly on loading paths and applied stress levels.     

A convex hull‐based approach for multiaxial high‐cycle fatigue criteria

Design methods against multiaxial high‐cycle fatigue require the formulation of appropriate criteria that differ in the definition of critical measures introduced to quantify damage, as the amplitude of shear stress. The present paper proposes a novel approach to compute the amplitude of shear stress in multiaxial high‐cycle fatigue. The approach is based on the computation of the convex hull enclosing the stress history under investigation and is validated on proportional and non‐proportional paths in several dimensions and for different materials. High accuracy is achieved when compared with alternative methods from the literature.     

Multiaxial fatigue life modelling using hybrid approach of critical plane and genetic algorithm

This paper presents a new hybrid approach for multiaxial fatigue life estimation, based on continuum damage mechanics theory and a genetic algorithm with critical plane model formulation. The hybrid model employs a genetic algorithm based setup for calibration with standard proportional and non‐proportional profiles to predict fatigue life for complex loading profiles. The model is evaluated using experimental fatigue life data for SS304 steel. Calibration using simplified profiles is in agreement with the requirement for cost‐effective experimental fatigue life testing. In‐phase and out‐of‐phase loads are used for calibration, and fatigue life is predicted for more complicated profiles. The results show good agreement between the estimated and experimental fatigue life, and calibration through simple loading histories to predict fatigue life for complex histories appears to be an effective solution using the proposed model. A brief comparison is presented with fatigue life estimation performance of the proposed model with models available in commercial codes. Proposed model found to be more consistent in fatigue life prediction against various loading conditions.     

Short crack approach for multiaxial fatigue assessment

A significant part of the fatigue life is spent during short crack growth. Therefore, modelling of short fatigue crack growth offers an opportunity to improve the accuracy of numerical life assessment. Besides stating some general remarks on the short crack approach itself and on multiaxial fatigue criteria, a short crack growth based fatigue life prediction approach for multiaxial non‐proportional loading is presented. This approach accounts for the geometrical size effect by considering the geometry correction functions for semi‐elliptical surface cracks in inhomogeneous gradient stress fields. The geometrical size effect is becoming significant for notch radii smaller than four times the defined technical crack size. Additionally, life influencing factors due to the statistical size effect have been taken into account. The comparison of calculated and experimentally observed fatigue lives of shouldered shafts made of S460N with notch radii of 0.2 to 4.0 mm under non‐proportional tension and torsion loading yields a satisfying accuracy.     

A new path‐dependent multiaxial fatigue model for metals under different paths

Based on the critical plane approach, a new path‐dependent multiaxial fatigue model in low‐cycle fatigue is proposed. The proposed model includes damage contribution from four sources: the normal strain amplitude, the shear strain amplitude on the critical plane, the hydrostatic mean strain and a new path‐dependent factor. The effect of mean strain is considered by the hydrostatic mean strain. The experimental data of 11 kinds of materials are used to demonstrate the effectiveness of this new model under both zero and non‐zero mean strain multiaxial loading path.     

A novel engineering method based on the critical plane concept to estimate the lifetime of weldments subjected to variable amplitude multiaxial fatigue loading

This paper summarizes an attempt at proposing a new engineering method suitable for estimating the fatigue lifetime of steel‐ and aluminium‐welded connections subjected to variable amplitude multiaxial fatigue loading. In particular, the proposed approach is based on the use of the so‐called Modified Wöhler Curve Method (MWCM), i.e. a bi‐parametrical critical plane approach, whose accuracy has been checked so far solely in addressing the constant amplitude multiaxial fatigue problem. In order to extend the use of our criterion to variable amplitude situations, the critical plane is suggested here as being determined by taking full advantage of the maximum variance concept, that is, such a plane is assumed to be the one containing the direction along which the variance of the resolved shear stress reaches its maximum value. The main advantage of such a strategy is that the cycle counting can directly be performed by considering the shear stress resolved along the maximum variance direction: by so doing, the problem is greatly simplified, allowing those well‐established cycle counting methods specifically devised to address the uniaxial variable amplitude problem to be extended to those situations involving multiaxial fatigue loading. The validity of the proposed methodology was checked by using two different datasets taken from the literature and generated by testing both steel and aluminium tube‐to‐plate welded connections subjected to in‐phase and 90° out‐of‐phase variable amplitude bending and torsion. This new fatigue life assessment technique was seen to be highly accurate allowing the estimates to fall within the calibration scatter bands not only when the constants in the governing equations were calculated by using the experimental uniaxial and torsional fully reversed fatigue curves, but also when they were determined by using the reference curves supplied, for the investigated geometry, by the available standard codes. These results seem to strongly support the idea that, thanks to its peculiar features, our method can be considered as an effective engineering approach capable of performing multiaxial fatigue assessment under variable amplitude loading which fully complies with the recommendations of the available standard codes.     

Methodology for assessing embryonic cracks development in structures under high‐cycle multiaxial random vibrations

The myriad applicability of the frequency‐domain critical plane criterion is outlined in order to evaluate and track the progression of fatigue damage in metallic structures subjected to high‐cycle multiaxial random vibrations. The fatigue assessment using the given criterion is performed according to the following stages: (i) critical plane definition, (ii) power spectral density evaluation of an equivalent normal stress and (iii) computation of the damage precursor and fatigue life. The frequency‐domain critical plane criterion is validated using experimental results related to (a) AISI 1095 steel cantilever beams under nonlinear base vibration, (b) 18G2A steel and (c) 10HNAP steel round specimens under random non‐proportional combined flexural and torsional loads.     

A weight function-critical plane approach for low-cycle fatigue under variable amplitude multiaxial loading

Low‐cycle fatigue data of type 304 stainless steel obtained under axial‐torsional loading of variable amplitudes are analyzed using four multiaxial fatigue parameters: SWT, KBM, FS and LKN. Rainflow cycle counting and Morrow's plastic work interaction rule are used to calculate fatigue damage. The performance of a fatigue model is dependent on the fatigue parameter, the critical plane and the damage accumulation rule employed in the model. The conservatism and non‐conservatism of predicted lives are examined for some combinations of these variables. A new critical plane called the weight function‐critical plane is introduced for variable amplitude loading. This approach is found to improve the KBM‐based life predictions.     

Low‐cycle fatigue of 316L stainless steel under proportional and nonproportional loadings

This paper discusses low‐cycle fatigue characteristics of 316L stainless steel under proportional and nonproportional loadings. Tension–torsion multiaxial low‐cycle fatigue tests were performed using five strain paths. Additional hardening was observed under nonproportional loadings and was more significant in tests with larger nonproportionality. Mises equivalent strain, Smith–Watson–Topper, Fatemi–Socie, Kandil–Brown–Miller and nonproportional strain parameters were applied to the experimental data to evaluate the multiaxial low‐cycle fatigue damage. The applicability of the damage laws to practical design was discussed.     

Modelling of fatigue lifetime under non-proportional multiaxial alternating loading

This paper presents two approaches to lifetime prediction under non‐proportional multiaxial alternating loading; a phenomenological approach using the Manson–Coffin relation and a microstructural approach. Both models have in common the use of a new multiaxiality factor. The data sets for the adaptation and validation of both models are taken from the authors' own experiments. In these tests, both the load paths and the phase shift are varied. The biaxial test apparatus allows for an application of fixed principal stress or strain directions even under non‐proportional loading. A fairly good agreement with our multiaxial lifetime results is obtained with both models. For an advanced assessment of the quality of the approaches used, the models are compared with several other well‐known models from the literature. An additive yardstick is used for the comparison of the different models.