Direct hydrolysis synthesis of BiOI flowerlike hierarchical structures and it's photocatalytic activity under simulated sunlight irradiation

BiOI flowerlike hierarchical structure was synthesized via direct hydrolysis from BiI₃ and characterized by powder X-ray diffraction (XRD), UV–vis diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS) spectra, and transmission electron microscopy (TEM). As-synthesized BiOI showed higher photocatalytic activity in aqueous RhB photodegradation system than P25 TiO₂ under simulated sunlight irradiation. The trapping experiments of active species and electron spin resonance (ESR) experiment during the photocatalytic reaction showed that the photocatalytic degradation of organic pollutants in BiOI system proceeds through direct hole transfer and O₂⁻ rather than OH.     

Visible-light-responsive photocatalysts xBiOBr–(1−x)BiOI

A new class of oxyhalide photocatalysts xBiOBr–(1−x)BiOI prepared by a soft chemical method were characterized by X-ray diffraction and UV–Vis diffuse reflectance spectra. They are all visible-light-responsive materials with the bandgaps ranging from 1.92 to 2.91 eV. Methyl orange (MO) photocatalytic degradation experiments showed that BiOBr possessed a higher photocatalytic activity than P25 (TiO₂) under UV illumination and iodine-modified BiOBr exhibited high photocatlytic activities under visible-light irradiation. The high photocatalytic activity is in close relation with the deep valance band edge position and the internal electric fields between [Bi₂O₂] slabs and halogen anionic slabs.     

Facile synthesis of Cu<Subscript>x</Subscript>O (x = 1, 2)/TiO<Subscript>2</Subscript> nanotube arrays as an efficient visible-light driven photocatalysts

TiO₂ nanotube arrays (TNTs) modified with Cu_xO (x = 1, 2) were prepared by a simple impregnation-calcinations method. The obtained samples were characterized by field emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy , UV–Vis diffuse reflectance spectroscopy and photocurrent tests. The photocatalytic ability of the as-prepared photocatalysts was evaluated using rhodamine B (RhB) as a target pollutant. Compared with pure TNTs, the Cu_xO/TNTs composite exhibited much higher photocatalytic activity under visible-light irradiation (λ > 420 nm). The photocatalytic activity of the composite was related to impregnation time of the copper nitrate solution, and an optimal time was 2 h. The activity of 2-Cu_xO/TNTs displayed 4.9 times as high as that of pure TNTs. The enhanced photocatalytic performance is mainly attributed to the synergistic effects of initiating visible-light absorption and the matched band edge positions of Cu₂O, CuO and TiO₂. Also, a possible mechanism on the Cu_xO/TNTs photocatalytic degradation of RhB is proposed. Overall, the inexpensive and environmentally friendly photocatalyst, as promising materials, could be used to remove some aquatic pollutants in the field of water purification.     

Enhanced Solid‐Phase Photocatalytic Degradation Activity of a Poly(vinyl chloride)‐TiO2 Nanocomposite Film with Bismuth Oxyiodide

A new type of photodegradable poly(vinyl chloride)‐bismuth oxyiodide/TiO₂ (PVC‐BiOI/TiO₂) nanocomposite film was prepared by embedding a nano‐TiO₂ photocatalyst modified by BiOI into the commercial PVC plastic. The solid‐phase photocatalytic degradation behavior of the as‐prepared film was investigated in ambient air at room temperature under UV light irradiation, with the aid of UV‐Vis spectroscopy, weight loss monitoring, scanning electron microscopy, and FT‐IR spectroscopy. Compared to the PVC‐TiO₂ nanocomposite film, the PVC‐BiOI nanocomposite film and the pure PVC film, the PVC‐BiOI/TiO₂ nanocomposite film exhibited a higher photocatalytic degradation activity. The optimal mass ratio of BiOI to TiO₂ was found to be 0.75 %. The weight loss rate of the PVC‐BiOI/TiO₂ nanocomposite film reached 30.8 % after 336 h of irradiation, which is 1.5 times higher than that of the PVC‐TiO₂ nanocomposite film under identical conditions. The solid‐phase photocatalytic degradation mechanism of the nanocomposite films was briefly discussed.     

Synthesis of heterostructured Bi2O3–CeO2–ZnO photocatalyst with enhanced sunlight photocatalytic activity

The development of heterostructured semiconductor photocatalysts makes a noteworthy advancement in environmental purification technology. In this work, a novel heterostructured Bi₂O₃−CeO₂−ZnO, fabricated by a combination of microwave-assisted hydrothermal and thermal decomposition methods, showed an enhanced photocatalytic activity for Rhodamine B (RhB) degradation under sunlight, as compared to pristine ZnO, Bi₂O₃, CeO₂, and commercial Degussa TiO₂-P25. The obtained products were thoroughly characterized by various techniques including X- ray powder diffraction (PXRD), field emission scanning electron microscopy (FE-SEM), elemental color mapping, energy-dispersive X-ray spectroscopy (EDAX), Raman spectrometry, Fourier transform infrared (FT-IR) spectroscopy, UV–visible diffuse reflectance spectroscopy (UV–vis DRS), and photoluminescence (PL) spectroscopy. PXRD analysis reveals that the heterostructure has the monoclinic lattice phase of α-Bi₂O₃, the cubic phase of CeO₂ and the hexagonal wurtzite phase of ZnO. FE-SEM images show that Bi₂O₃−CeO₂−ZnO has an ordered mixture of nanorod and nanochain structures. EDAX, elemental color mapping, Raman and FT-IR analyses confirm the successful formation of the heterostructured Bi₂O₃−CeO₂−ZnO. The UV–Vis DRS results demonstrate that Bi₂O₃−CeO₂−ZnO exhibits wide visible-light photoabsorption in 400–780 nm range. Moreover, the reduction in PL intensity of the heterostructured Bi₂O₃−CeO₂−ZnO, when compared to the pristine Bi₂O₃, CeO₂, and ZnO, indicates enhanced charge separation. The study on the mechanism displayed that the improved photocatalytic activity of Bi₂O₃−CeO₂−ZnO could be attributed to (1) the efficient separation of photoinduced electrons and holes of the photocatalysts, caused by the vectorial transfer of electrons and holes among ZnO, CeO₂ and Bi₂O₃, and (2) the wide visible-light photoabsorption range. This study introduces a new class of promising sunlight-driven photocatalysts.     

Facile one-step synthesis of BiOCl/BiOI heterojunctions with exposed {001} facet for highly enhanced visible light photocatalytic performances

Flowers-like structure BiOCl/BiOI heterojunctions with exposed {001} facets have been prepared by a facile one-step hydrothermal method. The 70% BiOCl/BiOI heterojunction exhibited the highest photocatalytic activity. The highly enhanced visible light photocatalytic performance was mainly ascribed to the synergistic effect of {001} crystal facets, sensitization of RhB, increasing photo absorption and heterojunctions. The synergistic effect of coupled system could open up new opportunities to develop high-performance photocatalysts for degradation of organic pollutants in water.     

BiOCl and TiO2 deposited on exfoliated ZnCr-LDH to enhance visible-light photocatalytic decolorization of Rhodamine B

A series of novel TiO₂-BiOCl-ZnCr-Ex composites for use as photocatalysts were synthesized via a facile solvothermal process using an exfoliated ZnCr-LDH (ZnCr-Ex) and depositing BiOCl and TiO₂ sequentially on the surface of ZnCr-Ex. The composites were characterized by XRD, TEM, SEM-EDS and UV–vis diffuse reflectance spectroscopy. In these composites, the BiOCl nanosheets were deposited first on the surfaces of ZnCr-Ex and then the TiO₂ nanoparticles were dispersed on the surface of BiOCl-ZnCr-Ex material as were seen from SEM and TEM analyses. The photocatalytic degradation of Rhodamine B (RhB) indicated that the TiO₂-BiOCl-ZnCr-Ex composite showed much higher visible-light photocatalytic activity for degradation of RhB than TiO₂ alone, BiOCl alone or the BiOCl-ZnCr-Ex by itself. The possible mechanisms of photocatalytic activity were discussed. Moreover, the present composite photocatalysts exhibited satisfactory re-usability for at least three cycles. Because of the facile synthesis process, higher photocatalytic activity under visible light irradiation and satisfactory re-usability of these composites, they can be touted as potential catalysts for degradation of organic pollutants in wastewater treatment.     

MOF assisted synthesis of a Ho2O3/CNT nanocomposite photocatalyst for organic pollutants degradation

In this work, a holmium oxide (Ho₂O₃/CNT) photocatalysts were successfully synthesized through a MOF assisted route for the first time. The effects of the morphology and purity on the photocatalytic behavior of the products, were investigated by determining various physicochemical properties. The Ho₂O₃/CNT nanocomposite was systematically analyzed by powder X-ray diffraction (P-XRD), transmission electron microscopy (TEM), ultraviolet–visible diffuse reflectance spectroscopy (UV–vis DRS), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy studies. The Ho₂O₃ derived from a MOF assisted synthetic route using Ho(NO₃)₃·5H₂O and terephthalic acid with a 1:1 M ratio at a temperature of 750 °C for 3 h prove the most advantageous, 98% degradation of 20 mg/L aqueous tetracycline pollutant was observed within 60 min. The elevated photocatalytic activity was mainly attributable to the unique synthetic route, improved crystallinity, wide UV-light absorption rate and excellent adsorption capabilities of CNT, as well as enhanced oxygen deficiency. The photocatalytic results confirm that the Ho₂O₃/CNT nanocomposite is an efficient photocatalyst for the degradation of toxic tetracycline pollutant and is thus suitable for use in environmental remediation.     

Preparation of Ag@AgI-intercalated K4Nb6O17 composite and enhanced photocatalytic degradation of Rhodamine B under visible light

In this study, a novel plasmonic photocatalyst, Ag@AgI intercalated layered niobate, was synthesized via a microwave-assisted ion-exchange method. The composite materials prepared were characterized by using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), X-ray fluorescence spectrometry (XRF), Brunauer–Emmett–Teller (BET) and ultraviolet–visible diffuse reflection spectra (UV–vis). The as-prepared plasmonic photocatalyst exhibited an enhanced and stable photocatalytic performance for the degradation of Rhodamine B (RhB) and up to 83% of RhB was degraded in 40 min under visible light irradiation. The mechanism of separation of the photo-generated electrons and holes at the K₄Nb₆O₁₇/Ag@AgI composite was discussed.     

BiFeO3-synthesis,characterization and its photocatalytic activity towards doxorubicin degradation from water

Pure bismuth ferrite was successfully obtained through the thermolysis of new bismuth ferrioxalate coordination compound, namely BiFe(C₂O₄)₃·3H₂O. The synthesized precursor was characterized by chemical analysis, infrared spectroscopy and thermal analysis. The bismuth ferrite obtained after a heating treatment of the precursor for at 450–800?°C/1?h was investigated by X-ray diffraction, FE-SEM, TEM and HRTEM. The obtained pure bismuth ferrite nanoparticles (480?°C) was tested as photocatalyst towards the degradation of doxorubicin (DOX), a well-known anti-cancer drug commonly used for the treatment of various cancer types, which has been detected in hospital effluent water. The comparative results of DOX degradation through photolysis and photocatalysis under UV irradiation showed a great photocatalytic activity of bismuth ferrite towards DOX degradation and mineralization from water. The kinetics aspects were discussed based on the first-order kinetics model that fitted the best the experimental photocatalysis results.     

Microwave engineering of ZnWO4 nanostructures: Towards morphologically favorable structures for photocatalytic activity

Nanocrystalline ZnWO₄ photocatalysts were successfully prepared by microwave-assisted-solid state metathesis, microwave-assisted-precipitation, and microwave-assisted-molten salt techniques at 250 °C. The obtained products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), infrared (IR), photoluminescence (PL), and diffuse reflectance spectroscopy (DRS). The results showed that morphology and dimensions of the products are highly dependent upon the mixing mode of the ingredients. Nanoribbons synthesized by a microwave-assisted-solid state metathesis approach (MWASSM) has the best photocatalytic activity with RhB degradation rate of 74% after 75 min. High photocatalytic activity of MWASSM sample was due to low concentrations of hydrogen-related defects, high crystallinity, and high aspect ratio of obtained nanoribbons.     

Novel in-situ synthesis of Au/SnO2 quantum dots for enhanced visible-light-driven photocatalytic applications

In recent years, visible-light-driven metal–semiconductor nanocomposites have emerged as a suitable material for the decomposition of various water and air pollutants. In this work, a novel plasmonic Au nanoparticle (NP)/SnO₂ quantum dot (SQD) nanocomposite photocatalysts were prepared via a one-step solvothermal technique. The as-prepared plasmonic photocatalysts were characterized by various techniques, and the results established the formation of Au/SQD nanocomposites. The photocatalytic activity of the as-prepared plasmonic Au/SQD nanocomposites was examined by the degradation of Rhodamine B (RhB) at room temperature under visible light, and the Au/SQD photocatalyst, prepared using 1.0?g of tin chloride, exhibited a higher rate constant of RhB degradation than pristine SQDs. This exceptional improvement in catalytic performance under visible light is ascribed to a shift of the band gap from the ultraviolet to the visible region. The surface plasmon resonance effect of Au NPs and the synergistic coupling of the metal and the semiconductor QDs also played a vital role in enhancing the catalytic performance. The process of the photocatalytic degradation of RhB by the Au/SQD nanocomposites under visible light is described.     

Facile synthesis of WO3 nanorods/g-C3N4 composites with enhanced photocatalytic activity

In this paper, WO₃ nanorods (NRs)/g-C₃N₄ composite photocatalysts were constructed by assembling WO₃ NRs with sheet-like g-C₃N₄. The as-synthesized photocatalysts were characterized by X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, UV–vis diffuse reflectance spectroscopy and photoluminescence. The photocatalytic activity of the photocatalysts was evaluated by degradation of Rhodamine B (RhB) under simulated sunlight irradiation. Compared to pristine WO₃ NRs and g-C₃N₄, WO₃ NRs/g-C₃N₄ composites exhibit greatly enhanced photocatalytic activities. The enhanced performance of WO₃ NRs/g-C₃N₄ composite photocatalysts was mainly ascribed to the synergistic effect between WO₃ NRs and g-C₃N₄, which improved the photogenerated carrier separation. A possible degradation mechanism of RhB over the WO₃ NRs/g-C₃N₄ composite photocatalysts was proposed.     

Synthesis of Nanofiber‐like Mesoporous γ‐Al2O3 toward Its Adsorption Efficiency for Congo Red

Nanofiber‐like mesoporous γ‐Al₂O₃ was synthesized using freshly prepared boehmite sol in the presence of triblock copolymer, P123 following evaporation‐induced self‐assembly (EISA) process followed by calcinations at 400°C–1000°C. The samples were characterized by thermogravimetry (TG), differential thermal analysis (DTA), X‐ray diffraction (XRD), N₂ adsorption–desorption, and transmission electron microscopy (TEM). The adsorption efficiency of the samples with Congo red (CR) was studied by UV – vis spectroscopy. XRD results showed boehmite phase in the as‐prepared sample while γ‐Al₂O₃ phase obtained at 400°C was stable up to 900°C, a little transformation of θ‐Al₂O₃ resulted at 1000°C. The Brunauer‐Emmett‐Teller surface area of the 400°C‐treated sample was found to be 175.5 m²g ^{? 1}. The TEM micrograph showed nanofiber‐like morphology of γ‐Al₂O_3. The 400°C‐treated sample showed about 100% CR adsorption within 60 min.     

Effect of metal-support interaction on the structural and enhanced photocatalytic performance of mesoporous M–TiO<Subscript>2</Subscript>/SBA-16 (M = Ag and Fe)

In this paper, a series of metal supported TiO₂/SBA-16 photocatalysts were successfully synthesized by wet impregnation method. The synthesized samples were characterized by X-ray diffraction (XRD), Raman spectra, N₂ adsorption–desorption, transmission electron microscopy (TEM), UV–visible absorption spectra (UV-vis) and X-ray photoelectron spectroscopy (XPS). It was found that SBA-16 retained the ordered mesostructure after modification. The results shown that loading different metal elements was found to have significant influences on the crystallographic structure and physical properties. Moreover, the prepared materials were evaluated on photodegradation of Rhodamine B (RhB). Experiment results showed that the degradation of RhB by these catalysts follows the pseudo-first-order kinetic model. The effect of metal element on photocatalytic activity can be attributed that the appropriate amounts of metal concentration can enhance the photocurrent due to the reduced electron–hole recombination, which can improve the efficiency of photocatalytic reactions.     

Hydrothermal synthesis and visible-light photocatalytic activity of porous peanut-like BiVO4 and BiVO4/Fe3O4 submicron structures

Porous peanut-like BiVO₄ and BiVO₄/Fe₃O₄ submicron structures were synthesized by a template-free hydrothermal process at 160 °C for 24 h. The as-synthesized samples were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometer (VSM) and UV–vis spectroscopy. The photocatalytic activity of BiVO₄ and BiVO₄/Fe₃O₄ submicron structures were evaluated for the degradation of Rhodamine B (RhB) and methylene blue (MB) under visible light irradiation with and without the assistance of H₂O₂. According to the experimental results obtained, porous peanut-like BiVO₄/Fe₃O₄ composite photocatalyst shows higher photocatalytic activity in the H₂O₂-assisted system under visible light irradiation compared to BiVO₄. Recycling test on the BiVO₄/Fe₃O₄ composite photocatalyst for the degradation of RhB under visible light irradiation indicates that the composite photocatalyst is stable in the H₂O₂-assisted system in five cycles. Therefore, this composite photocatalyst will be beneficial for efficient degradation of organic pollutants present in water and air under solar light.     

Visible light induced photocatalytic activity of MnO2/BiVO4 for the degradation of organic dye and tetracycline

In this work, α-MnO₂/BiVO₄ nanocomposites with varying MnO₂ contents (0–7 wt%) were successfully prepared via the simple chemical method. The structure, morphology, and optical properties of prepared nanocomposites were studied by various analytical techniques including X-ray diffraction (XRD), scanning electron microscopy (SEM), UV–visible absorption spectroscopy, and photoluminescence (PL) spectroscopy. The photocatalytic efficiency of α-MnO₂/BiVO₄ nanocomposites was studied via decomposition of rhodamine B (RhB) and tetracycline (TC) under exposure to visible light (λ ≥ 420 nm). Due to good structure and composite advantages, 5%MnO₂/BiVO₄ (MnBV-5) photocatalyst exhibited superior RhB and TC degradation efficiency to all other samples. In addition, the MnBV-5 photocatalyst showed good stability, and no apparent reduction in photocatalysis efficiency was noted after five testing cycles. Therefore, the MnO₂/BiVO₄ nanocomposite demonstrated a good potential for photocatalytic decomposition of new water contaminants.     

Preparation and Characterization of Bi3+‐TiO2 and its Photocatalytic Activity

Bi³⁺‐TiO₂ photocatalysts were prepared by doping bismuth ion into the TiO₂ structure in a sol‐gel process. The catalyst samples were then characterized by UV‐vis diffuse reflectance spectra (DRS), X‐ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD) and transmission electron microscopy (TEM). Rodamine‐B (RhB) was used in this study as a model chemical with the aim of organic pollutants control. The photocatalytic degradation of RhB demonstrated that an optimal loading of bismuth 0.7 at. % achieved the highest photodegradation rate, with the rate constant increasing by a factor of 3.89 over neat TiO₂ (P25) under UV illumination (λ ≥ 320 nm). The degradation of p‐nitrobenzonic acid (pNBA) was also examined to prevent/preclude/exclude/ the photosensitization pathway. GC‐MS results show that pNBA can be effectively degraded and minerized to small molecules, such as quinone, acetic acid and formic acid.     

Surfactant-free synthesis of a novel octahedral ZnFe2O4/graphene composite with high adsorption and good photocatalytic activity for efficient treatment of dye wastewater

Recently, significant effort has been made toward the development of graphene-based visible-ligh-responsive photocatalysts and their application to dye wastewater treatment. Herein, a series of octahedral ZnFe₂O₄/graphene (ZnFe₂O₄-G) nanocomposites were synthesized using a one-pot solvothermal reaction without the need of a surfactant as novel bifunctional materials exhibiting both high adsorption and good visible-light-responsive photocatalyst properties. The crystal structure, morphology and photocatalytic degradation properties, as well as adsorption behavior, of the octahedral ZnFe₂O₄/graphene composites were investigated in detail. The adsorption capacity and UV–vis spectrometry results indicate that the dye removal efficiency over the samples followed the order of: methylene blue (MB) > rhodamine B (RhB) > methyl orange (MO). The ZnFe₂O₄-G materials exhited enhanced photocatalytic degradation properties for cationic dyes (MB and RhB) compared to those for the anionic dye (MO). In addition, the experimental results indicate that the ZnFe₂O₄-G materials can decompose H₂O₂ in the visible-light photocatalytic process to form hydroxyl radicals (•OH), which are mainly responsible for the photodegradation of the organic contaminants.     

Photocatalytic performance of Fe-substituted ZnAl2O4 powders under sunlight irradiation on degradation of industrial dyes

Using the sol–gel auto combustion method with diethanolamine (DEA) as fuel, a sequence of iron-substituted zinc aluminates, ZnFe_xAl_2-xO₄ powders, including variable Fe³⁺ ion concentrations (0 ≤ x ≤ 2) were effectively prepared. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), the Brunauer–Emmett–Teller (BET) method, UV–visible diffuse reflectance spectroscopy (UV-DRS), and vibrating sample magnetometer (VSM) were employed to examine the structures, chemical bonds, morphologies, composition, surface area, and optical properties as well as the magnetic behavior of the obtained samples. A single-phase spinel structure was obtained for the calcined aluminate powders with different interplanar spacing and crystallite sizes, as revealed by the classification results. The bandgap energy (E_g) of adapted aluminates was in the range of 2.04-3.14 eV, identified as being much lower compared to the pure sample (5.60 eV). Thus, Fe³⁺-substituted ZnAl₂O₄ samples could be successfully photoexcited using both ultraviolet and visible light, as suggested by the results. Examination of how the four main pollutant types decay when irradiated by sunlight was carried out to assess the samples and establish photocatalytic activity. These contaminants included rhodamine B (RhB), methylene blue (MB), methyl orange (MO), and methyl red (MR). The performance of photocatalytic degradation reached 98% after 150 min for all optimal samples of organic dyes. Besides, each of the altered photocatalysts could be recycled and displayed high stability. The S-shaped curve of ferrimagnetism can result in those samples as found by the magnetic measurements, though pure ZnAl₂O₄ displays diamagnetic characteristics. The adapted samples show intense improvement in the remanent magnetization (M_r) when compared to pure ZnAl₂O₄, signifying that magnetic photocatalyst recovery by applying an external magnetic field is easy. Thus, these results offer a convincing sign that ZnAl₂O₄ powders replaced by Fe³⁺ could provide the ability to aid in the ecologically friendly collection of solar energy.