Electronic structure of methoxy-, bromo-, and nitrobenzene grafted onto Si(111)

The properties of Si(111) surfaces grafted with benzene derivatives were investigated using ultraviolet photoemission spectroscopy (UPS) and X-ray photoelectron spectroscopy (XPS). The investigated materials were nitro-, bromo-, and methoxybenzene layers (-C(6)H(4)-X, with X = NO(2), Br, O-CH(3)) deposited from diazonium salt solutions in a potentiostatic electrochemical process. The UPS spectra of the valence band region are governed by the molecular orbital density of states of the adsorbates, which is modified from the isolated state in the gas phase due to molecule-molecule and molecule-substrate interaction. Depending on the adsorbate, clearly different emission features are observed. The analysis of XPS intensities clearly proves multilayer formation for bromo- and nitrobenzene in agreement with the amount of charge transferred during the grafting process. Methoxybenzene forms only a sub-monolayer coverage. The detailed analysis of binding energy shifts of the XPS emissions for determining the band bending and the secondary electron onset in UPS spectra for determining the work function allow one to discriminate between surface dipole layers--changing the electron affinity--and band bending, affecting only the work function. Thus, complete energy band diagrams of the grafted Si(111) surfaces can be constructed. It was found that silicon surface engineering can be accomplished by the electrochemical grafting process using nitrobenzene and bromobenzene: silicon-derived interface gap states are chemically passivated, and the adsorbate-related surface dipole effects an increase of the electron affinity.     

Xps measurement and molecular orbital calculation of valence band electronic structure of sodium cyanate

The electronic structure of the core and the valence band region of sodium cyanate is investigated by X-ray photoelectron spectroscopy (XPS). The energy levels and the molecular wavefunctions of the NCO^? ion are calculated by the INDO method and the results are used to obtain the photoionization cross sections for the valence levels of the anion. A simulation of the XPS spectra in good agreement with the experimental spectra is obtained.     

Electronic structure of the surface of the ionic liquid [EMIM][Tf(2)N] studied by metastable impact electron spectroscopy (MIES), UPS, and XPS

The near-surface electronic structure of the room-temperature ionic liquid (RT-IL) 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][Tf(2)N]) has been investigated with the combination of the electron spectroscopies metastable impact electron spectroscopy (MIES), ultraviolet photoelectron spectroscopy (UPS (HeI and HeII)), and monochromatized X-ray photoelectron spectroscopy (XPS). We find that the top of the valence band states originates from states of the cation (see also ref 1). The ultimately surface-sensitive technique MIES proves that the surface layer consists of both cations and anions. The temperature dependence of the spectra has been measured between about 160 and 610 K. Information on the glass transition and the possibility for low-temperature distillation of [EMIM][Tf(2)N] at reduced pressures is derived from the present results.     

Electronic Structure and Interface Properties of a Model Molecule for Organic Solar Cells

We study the electronic structure of 4,7‐bis(5‐methylthiophen‐2‐yl)benzo[c][1,2,5]thiadiazole (MTBT) and its interface properties with gold using X‐ray photoemission spectroscopy (XPS), valence‐band ultraviolet photoemission spectroscopy (UPS), X‐ray absorption spectroscopy (XAS), as well as resonant photoemission (ResPES). MTBT can be regarded as a model molecule for PCPDTBT, a promising candidate for efficient bulk heterojunction solar cells. Almost no contribution of sulfur and only a weak contribution of nitrogen to the HOMO level is found. At the interface with gold, a strong chemical interaction between the sulfur of the benzothiadiazole and gold occurs, which may have consequences for interface properties in devices.     

x-RAY PHOTOELECTRON VALENCE BAND STUDIES ON FIREFLY D-(-)-LUCIFERIN

Abstract— The valence band spectrum of firefly D-(-)-luciferin (Ln) was measured for the first time by x-ray photoelectron spectroscopy (XPS). Since the conversion of Ln to decarboxydehydroluciferin (dcrL) by x-ray irradiation occurred even within ∼30 min, the effect of the irradiation on the valence band spectrum of Ln was investigated quantitatively. We found that the XPS valence band spectrum of Ln during irradiation for 3 h corresponds to the state density of Ln calculated by the LCAO-ASMO-SCF-CI method for π-electrons. Moreover, the weak coupling model for π-electron transfer between Ln and oxygen was proposed for the primary electronic process in Ln chemiluminescence, assuming that the calculated π-electron state densities of Ln in acidic and basic solutions reflect the characteristics of their XPS valence band spectra.     

Electronic Energy Structure of TiCu and Ti2Cu

The electronic energy structure (EES) of the valence band in tetragonal TiCu and Ti₂Cu was studied experimentally and theoretically. The experimental study of valence band EES was carried out by X-ray photoelectron spectroscopy (XPS). The calculations were performed in terms of the cluster version of multiple scattering theory in a self-consistent field approximation. The results are compared with X-ray emission spectroscopy data available in the literature. The density of state curves agree well with spectroscopic data. The major contribution to XPS is from the copper d-states. The specifics of chemical bonding in the compounds leading to the observed changes in the shape of the valence band X-ray photoelectron spectra are discussed.     

Electronic structure of europium(<Emphasis Type="SmallCaps">iii</Emphasis>) acrylate and methacrylate: an X-ray photoelectron spectroscopy and quantum chemical study

The electronic structure and specific features of the nature of chemical bonding in europium acrylate and europium methacrylate were investigated by X-ray photoelectron spectroscopy (XPS) and quantum chemistry methods. The effect of the replacement of acrylic acid by methacrylic acid was also studied. The assignment of bands in the valence region XPS spectra is proposed.     

The electronic band structure analysis of OLED device by means of in situ LEIPS and UPS combined with GCIB

Low-energy inverse photoelectron spectroscopy (LEIPS) and ultraviolet photoelectron spectroscopy (UPS) incorporated into the multitechnique XPS system were used to probe the ionization potential and the electron affinity of organic materials, respectively. By utilizing gas cluster ion beam (GCIB), in situ analyses and depth profiling of LEIPS and UPS were also demonstrated. The band structures of the 10-nm-thick buckminsterfullerene (C₆₀) thin film on Au (100 nm)/indium tin oxide (100 nm)/glass substrate were successfully evaluated in depth direction.     

Forces between Polymer Surfaces and Self-Assembled Monolayers

Gold-coated atomic force microscope (AFM) tips functionalized with amine-, hydroxyl-, carboxylic acid-, and methyl-terminated alkanethiol molecules were used to probe the adhesive forces of polystyrene and poly(acrylic acid) films in dry air (relative humidity < 0.5%). X-ray photoelectron spectroscopy (XPS) and contact angle measurements confirmed the quality and uniformity of similarly treated gold surfaces and the polymer films. XPS indicated that the amine-functionalized thiol films were protonated and comprised of multilayers. Contact angle data were used to calculate surface free energies, and DMT theory yielded the works of adhesion and interfacial free energies for the tip-substrate combinations. In the case of polystyrene, the work of adhesion followed the order methyl > carboxylic acid > hydroxyl > amine. For poly(acrylic acid), the observed order was hydroxyl > amine > carboxylic acid > methyl.     

Gold nanoparticles deposited on SiO2/Si100: correlation between size,electron structure,and activity in CO oxidation

Nanosize gold particles were prepared by Ar(+) ion implantation of 10-nm thick gold film deposited onto a SiO(2)/Si(100) wafer possessing no catalytic activity in the CO oxidation. Along with size reduction the valence band of the gold particles and the actual size were determined by ultraviolet- and X-ray photoelectron spectroscopy (UPS, XPS) and by transmission electron microscopy (TEM) as well as atomic force microscopy (AFM), respectively. The catalytic activity was determined in the CO oxidation. Energy distribution of the photoelectrons excited from 5d valence band of gold was strongly affected by Ar(+) implantation. This variation was interpreted by the redistribution of the valence band density of states (DOS). The intrinsic catalytic activity of the gold particles increased with decreasing size. When an Au/FeO(x) interface was created by FeO(x) deposition on large gold nanoparticles, a significant increase in the rate of the CO oxidation was observed. These data can be regarded as an experimental verification of the correlation between the catalytic activity and valence band density of states of gold.     

Temperature-dependent electronic and vibrational structure of the 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide room-temperature ionic liquid surface: a study with XPS, UPS, MIES, and HREELS

The near-surface structure of the room-temperature ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide has been investigated as a function of temperature between 100 and 620 K. We used a combination of photoelectron spectroscopies (XPS and UPS), metastable induced electron spectroscopy (MIES), and high-resolution electron energy loss spectroscopy (HREELS). The valence band and HREELS spectra are interpreted on the basis of density functional theory (DFT) calculations. At room temperature, the most pronounced structures in the HREELS, UPS, and MIES spectra are related to the CF3 group in the anion. Spectral changes observed at 100 K are interpreted as a change of the molecular orientation at the outermost surface, when the temperature is lowered. At elevated temperatures, early volatilization, starting at 350 K, is observed under reduced pressure.     

Valence band structure of cellulose and lignin studied by XPS and DFT

In this report, X-ray induced photoelectron spectroscopy (XPS) measurements of the valence band structure of cellulose and lignin are combined with a theoretical reconstruction of the spectra based on density functional theory (DFT) calculations. These calculations involve an analysis of the valence band structures and their respective orbitals in which basic units of cellulose and lignin are considered. In addition, photoionization cross sections are incorporated for reconstruction of the XPS spectra. This combination of theoretical calculations and experimental measurements revealed that an emission present up to 10 eV in the valence band structure is dominated by oxygen rather than by carbon, as reported in literature. Furthermore, a quantitative elemental analysis shows significant carbon contributions at binding energies above 13 eV. The valence band analysis supported by DFT provides a powerful basis for a detailed interpretation of spectroscopic data and enables a profound insight into application relevant processes in future.     

Photoelectron spectroscopic studies of the formation of hydroxyapatite films on 316L stainless steel pretreated with etidronic acid

The valence band and core‐level X‐ray photoelectron spectroscopy was used to probe hydroxyapatite films formed on the surface of stainless steel. These films formed on steel may find application in medical implants. The key to the successful adhesion of the hydroxyapatite films is shown to be the initial formation of a thin, oxide‐free etidronate film on the metal. It was not found possible to prepare the hydroxyapatite films directly on the metal surfaces. Since hydroxyapatite is a key component of bone and teeth, it is likely that the coated metals will have desirable biocompatible properties. The hydroxyapatite film was exposed to air, water, and 1M sodium chloride solution as representative components of the environment of the film in the human body, and these exposures led to no detectable decomposition of the film. The thin hydroxyapatite and etidronate film on the metal show differential charging effects that caused a doubling of the peaks in some core level spectra. The valence band spectra proved especially valuable in the identification of the surface chemistry of the films, and these spectra were interpreted by comparing the experimental spectra with spectra calculated using band structure calculations which showed good agreement with experiment. The calculated spectrum of etidronic acid was found to be significantly different to that of etidronate. Copyright © 2012 John Wiley & Sons, Ltd.     

Analytical utility of valence band X-ray photoelectron spectroscopy of iron and its oxides,with spectral interpretation by cluster and band structure calculations

The valence band and core-level X-ray photoelectron spectroscopy (XPS) of iron and its oxides are reported, and the valence band spectra interpreted by various calculation models. The paper focuses upon the valence band region, which shows significant differences between the metal and the following oxidized iron species: FeO, Fe(3)O(4), alpha-Fe(2)O(3), gamma-Fe(2)O(3), alpha-FeOOH and gamma-FeOOH. The core region is of little analytical value as a means of distinguishing between these species, but the valence band region shows significant differences. These differences are consistent with spectra predicted by cluster and band structure calculations. Cluster calculations are valuable as a means for interpreting the spectra of iron oxides with multiple iron sites and defect characteristics.     

Estimation of band alignment at CdS/Cu2ZnSnS4 hetero-interface by direct XPS measurements

This paper aims to estimate the band alignment to CdS/CZTS hetero-interface by direct X-ray photoelectron spectroscopy (XPS) measurements. XPS was used to determinate the valence-band offset (VBO) directly by determining the valence band positions at the hetero-interface. The conduction band offset (CBO) value was estimated based on the band gap measurements by UV/Visible spectroscopy and VBO measurements. The position of valence band (VB) changes close to the CdS-CZTS interface and the CBO is cliff-like. The band alignment diagram indicates that the CdS-CZTS interface heterojunction is type II.     

Work function and negative electron affinity of ultrathin barium fluoride films

Thin films of barium fluorides with different thicknesses were deposited on GaAs substrate by electron beam evaporation. The aim of the work was to identify the best growth conditions for the production of coatings with a low work function suitable for the anode of hybrid thermionic-photovoltaic (TIPV) devices. The chemical composition and work function φ of the films with different thicknesses were investigated by X-ray photoelectron spectroscopy (XPS) and ultraviolet photoelectron spectroscopy (UPS). The lowest value of φ = 2.1 eV was obtained for the film with a thickness of ~2 nm. In the valence band spectra of the films at low kinetic energy, near the cutoff, a characteristic peak of negative electron affinity was present. This effect contributed to a further reduction of the film's work function.     

Photoemission on gold-55-clusters derived from gold-phosphine AuP(C6H5)3Cl

We measured XPS and UPS spectra of gold clusters with 55 atoms, embedded in an electrically isolating phosphine matrix, and of gold-phosphine, from which the clusters were chemically derived. Compared to the spectra of bulk gold the valence band spectrum and the core level spectra of the clusters showed shifts of the peaks and the fermi level to higher binding energies. The shift of the peaks could qualitatively be interpreted by a final state effect. We succeeded in a separation of bulk and surface contributions to the core level spectra and in a reasonable quantitative analysis of the valence band spectrum of the clusters. The Au 4f core level spectrum of gold-phosphine showed two peaks at 1.5 eV higher binding energies than the corresponding peaks of the clusters.     

A study of reversible gamma-induced structural transformations in vitreous Ge23.5Sb11.8S64.7 by high-resolution X-ray photoelectron spectroscopy

The structural origin of reversible gamma-induced effects in vitreous Ge(23.5)Sb(11.8)S(64.7) has been investigated by high-resolution X-ray photoelectron spectroscopy (XPS). The changes in valence band spectrum from gamma-irradiation suggest a decrease of sulfur lone pair electron concentration accompanied by changes in bonding states of S and Ge. The appearance of additional doublets in the core-level XPS spectra of Ge, Sb, and S atoms for gamma-irradiated sample is described by the formation of over- and under-coordinated charged defect pairs (Ge(3)(-)-S(3)(+)) as a result of radiation treatment. The results verify the switching of Ge-S covalent bonds into S-S bonds as the main microstructural mechanism for gamma-induced optical effects in this glass.     

Photoemission studies of polythiophene and polyphenyl films produced via surface polymerization by ion-assisted deposition

Conducting polymer films are grown by mass-selected, hyperthermal thiophene ions coincident on a surface with a thermal beam of organic monomers of either alpha-terthiophene (3T) or p-terphenyl (3P) neutrals. Mass spectrometry and X-ray photoelectron spectroscopy previously verified polymerization of both 3T and 3P by 200 eV C(4)H(4)S(+) during surface polymerization by ion-assisted deposition (SPIAD). The electronic structure of these films are probed here by ultraviolet photoelectron spectroscopy (UPS) and polarized near-edge X-ray absorption fine structure spectroscopy (NEXAFS) and compared with similar spectra of evaporated films. The conducting polymer films formed by SPIAD display new valence band features resulting from a reduction in both their band gap and barrier to hole injection, which are calculated from the occupied and unoccupied valence band states measured by UPS and NEXAFS. These changes in film electronic structure result from an increase in the electron conjugation length and other changes in film structure induced by SPIAD.