Deep X-ray lithography using mask with integrated electrothermal actuator

We present a deep X-ray mask with integrated bent-beam electrothermal actuator for the fabrication of 3D microstructures with curved surface. The mask absorber is electroplated on the shuttle mass, which is supported by a pair of 20-m-thick single crystal silicon bent-beam electrothermal actuators and oscillated in a rectilinear direction due to the thermal expansion of the bent-beams. The width of each bent-beam is 10 m or 20 m and the length and bending angle are 1 mm and 0.1 rad, respectively, and the shuttle mass size is 1 mm × 1 mm. For 10-m-wide bent-beams, the shuttle mass displacement is around 15 m at 180 mW (3.6 V) dc input power. For 20-m-wide bent-beams, the shuttle mass displacement is around 19 m at 336 mW (4.2 V) dc input power. Sinusoidal cross-sectional PMMA microstructures with a pitch of 40 m and a height of 20 m are fabricated by 0.5 Hz, 20-m-amplitude sinusoidal shuttle mass oscillation.This research, under the contract project code MS-02-338-01, has been supported by the Intelligent Microsystem Center, which carries out one of the 21st centurys Frontier R & D Projects sponsored by the Korea Ministry of Science & Technology. Experiments at PLS were supported in part by MOST and POSCO.     

Recognition of handwritten musical notes by a modified Neocognitron

A neural network for recognition of handwritten musical notes, based on the well-known Neocognitron model, is described. The Neocognitron has been used for the what pathway (symbol recognition), while contextual knowledge has been applied for the where (symbol placement). This way, we benefit from dividing the process for dealing with this complicated recognition task. Also, different degrees of intrusiveness in learning have been incorporated in the same network: More intrusive supervised learning has been implemented in the lower neuron layers and less intrusive in the upper one. This way, the network adapts itself to the handwriting of the user. The network consists of a 13×49 input layer and three pairs of simple and complex neuron layers. It has been trained to recognize 20 symbols of unconnected notes on a musical staff and was tested with a set of unlearned input notes. Its recognition rate for the individual unseen notes was up to 93%, averaging 80% for all categories. These preliminary results indicate that a modified Neocognitron could be a good candidate for identification of handwritten musical notes.     

The effects of a “distinct window” screen design on computer-mediated group decision making

An experiment was performed to test a distinct-window conferencing screen design as an electronic cue of social status differences in computer-mediated group decision-making. The screen design included one distinct window to symbolize high-status, and two nondistinct windows to symbolize low-status. The results indicated that the distinct-window screen design did produce status affects in groups of peers making decisions on judgmental problems. Randomly assigned occupants of the distinct window had greater influence on group decisions and member's attitudes than occupants of nondistinct windows.The authors would like to thank Shyam Kamadolli and Phaderm Nangsue, the programmers who developed the software used in this experiment. We would also like to thank the editor and our three anonymous reviewers for exceedingly helpful comments on an earlier draft of this article.     

Exact Linear Thermodynamic Evolution Equations from the Robertson Formalism

A linear evolution equation for a thermodynamic variable F, odd under time-reversal, is obtained from the exact equation derived by Robertson from the Liouville equation for the information-theoretic phase-space distribution. One obtains an exact expression for , the relaxation time for F. For very short , is time-independent for t > if C(t) F{exp(-i t)}Fo, the equilibrium time correlation, decays exponentially for t > . is the Liouville operator. So long as C(t) is such that decays rapidly to a steady-state value, the t limit of agrees with the fluctuation-dissipation theorem in applications to fluid transport.     

Mesh Selection for a Nearly Singular Boundary Value Problem

In this paper, we investigate the numerical solution of a model equation u _xx = exp(– ) (and several slightly more general problems) when 1 using the standard central difference scheme on nonuniform grids. In particular, we are interested in the error behaviour in two limiting cases: (i) the total mesh point number N is fixed when the regularization parameter 0, and (ii) is fixed when N. Using a formal analysis, we show that a generalized version of a special piecewise uniform mesh 12 and an adaptive grid based on the equidistribution principle share some common features. And the optimal meshes give rates of convergence bounded by |log()| as 0 and N is given, which are shown to be sharp by numerical tests.     

Context-free text grammars

A text is a triple=(, ₁, ₂) such that is a labeling function, and ₁ and ₂ are linear orders on the domain of ; hence may be seen as a word (, ₁) together with an additional linear order ₂ on the domain of . The order ₂ is used to give to the word (, ₁) itsindividual hierarchical representation (syntactic structure) which may be a tree but it may be also more general than a tree. In this paper we introducecontext-free grammars for texts and investigate their basic properties. Since each text has its own individual structure, the role of such a grammar should be that of a definition of a pattern common to all individual texts. This leads to the notion of ashapely context-free text grammar also investigated in this paper.     

Sound and Complete Qualitative Simulation Needs “Quantitative” Filtering

The AI methodology of qualitative reasoning furnishes useful tools to scientists and engineers who need to deal with incomplete system knowledge during design, analysis, or diagnosis tasks. Qualitative simulators have a theoretical soundness guarantee; they cannot overlook any concrete equation implied by their input. On the other hand, the basic qualitative simulation algorithms have been shown to suffer from the incompleteness problem; they may allow non-solutions of the input equation to appear in their output. The question of whether a simulator with purely qualitative input which never predicts spurious behaviors can ever be achieved by adding new filters to the existing algorithm has remained unanswered. In this paper, we show that, if such a sound and complete simulator exists, it will have to be able to handle numerical distinctions with such a high precision that it must contain a component that would better be called a quantitative, rather than qualitative reasoner. This is due to the ability of the pure qualitative format to allow the exact representation of the members of a rich set of numbers.     

Choosing reference classes and building provisional models

A well-known problem in default logic is the ability of naive reasoners to explain bothg and ¬g from a set of observations. This problem is treated in at least two different ways within that camp.One approach is examination of the various explanations and choosing among them on the basis of various explanation comparators. A typical comparator is choosing the explanation that depends on the most specific observation, similar to the notion of narrowest reference class.Others examine default extensions of the observations and choose whatever is true in any extension, or what is true in all extensions or what is true in preferred extensions. Default extensions are sometimes thought of as acceptable models of the world that are discarded as more knowledge becomes available.We argue that the notions of specificity and extension lack clear semantics. Furthermore, we show that the problems these ideas were supposed to solve can be handled easily within a probabilistic framework.     

Specification and verification of database dynamics

Summary A framework is proposed for the structured specification and verification of database dynamics. In this framework, the conceptual model of a database is a many sorted first order linear tense theory whose proper axioms specify the update and the triggering behaviour of the database. The use of conceptual modelling approaches for structuring such a theory is analysed. Semantic primitives based on the notions of event and process are adopted for modelling the dynamic aspects. Events are used to model both atomic database operations and communication actions (input/output). Nonatomic operations to be performed on the database (transactions) are modelled by processes in terms of trigger/reaction patterns of behaviour. The correctness of the specification is verified by proving that the desired requirements on the evolution of the database are theorems of the conceptual model. Besides the traditional data integrity constraints, requirements of the form Under condition W, it is guaranteed that the database operation Z will be successfully performed are also considered. Such liveness requirements have been ignored in the database literature, although they are essential to a complete definition of the database dynamics.

Notation

Classical Logic Symbols (Appendix 1) for all (universal quantifier) - exists at least once (existential quantifier) - ¬ no (negation) - implies (implication) - is equivalent to (equivalence) - and (conjunction) - or (disjunction) Tense Logic Symbols (Appendix 1) G always in the future - G ₀ always in the future and now - F sometime in the future - F ₀ sometime in the future or now - H always in the past - H ₀ always in the past and now - P sometime in the past - P ₀ sometime in the past or now - X in the next moment - Y in the previous moment - L always - M sometime Event Specification Symbols (Sects. 3 and 4.1) (x) means immediately after the occurrence of x - (x) means immediately before the occurrence of x - (x) means x is enabled, i.e., x may occur next - { } ({w ₁} x{w ₂}) states that if w ₁ holds before the occurrence of x, then w ₂ will hold after the occurrence of x (change rule) - [ ] ([oa₁, ..., oa_n]x) states that only the object attributes oa₁, ..., oa _n are modifiable by x (scope rule) - {{ }} ({{w}}x) states that if x may occur next, then w holds (enabling rule) Process Specification Symbols (Sects. 5.3 and 5.4) :: for causal rules - for behavioural rules Transition-Pattern Composition Symbols (Sects. 5.2 and 5.3) ; sequential composition - ¦ choice composition - parallel composition - :| guarded alternative composition Location Predicates (Sect. 5.2) (z) means immediately after the occurrence of the last event of z (after) - (z) means immediately before the occurrence of the first event of z (before) - (z) means after the beginning of z and before the end of z (during) - ( z) means before the occurrence of an event of z (at)     

Separating complexity classes related to bounded alternating ω-branching programs

We develop a theory of communication within branching programs that provides exponential lower bounds on the size of branching programs that are bounded alternating. Our theory is based on the algebraic concept of -branching programs, : , a semiring homomorphism, that generalizes ordinary branching programs, -branching programs [M2] andMOD _p-branching programs [DKMW].Due to certain exponential lower and polynomial upper bounds on the size of bounded alternating -branching programs we are able to separate the corresponding complexity classesN _ba ,co-N _{ba ba} , andMOD _p - _ba ,p prime, from each other, and from that classes corresponding to oblivious linear length-bounded branching programs investigated in the past.     

Data encodings and their costs

Summary This paper is devoted to developing and studying a precise notion of the encoding of a logical data structure in a physical storage structure, that is motivated by considerations of computational efficiency. The development builds upon the notion of an encoding of one graph in another. The cost of such an encoding is then defined so as to reflect the structural compatibility of the two graphs, the (externally specified) costs of implementing the host graph, and the (externally specified) set of intended usage patterns of the guest graph. The stability of the constructed framework is demonstrated in terms of a number of results; the faithfulness of the formalism is argued in terms of a number of examples from the literature; and the tractability of the model is hinted at by several results and by further references to the literature.     

The dynamic clusters method in nonhierarchical clustering

Given a finite setE R ⁿ, the problem is to find clusters (or subsets of similar points inE) and at the same time to find the most typical elements of this set. An original mathematical formulation is given to the problem. The proposed algorithm operates on groups of points, called samplings (samplings may be called multiple centers or cores); these samplings adapt and evolve into interesting clusters. Compared with other clustering algorithms, this algorithm requires less machine time and storage. We provide some propositions about nonprobabilistic convergence and a sufficient condition which ensures the decrease of the criterion. Some computational experiments are presented.     

A New Class of Depth-Size Optimal Parallel Prefix Circuits

Given n values x₁, x₂, ... ,x_n and an associative binary operation o, the prefix problem is to compute x₁ox₂o··· ox_i, 1in. Many combinational circuits for solving the prefix problem, called prefix circuits, have been designed. It has been proved that the size s(D(n)) and the depth d(D(n)) of an n-input prefix circuit D(n) satisfy the inequality d(D(n))+s(D(n))2n–2; thus, a prefix circuit is depth-size optimal if d(D(n))+s(D(n))=2n–2. In this paper, we construct a new depth-size optimal prefix circuit SL(n). In addition, we can build depth-size optimal prefix circuits whose depth can be any integer between d(SL(n)) and n–1. SL(n) has the same maximum fan-out lgn+1 as Snir's SN(n), but the depth of SL(n) is smaller; thus, SL(n) is faster. Compared with another optimal prefix circuit LYD(n), d(LYD(n))+2d(SL(n))d(LYD(n)). However, LYD(n) may have a fan-out of at most 2 lgn–2, and the fan-out of LYD(n) is greater than that of SL(n) for almost all n12. Because an operation node with greater fan-out occupies more chip area and is slower in VLSI implementation, in most cases, SL(n) needs less area and may be faster than LYD(n). Moreover, it is much easier to design SL(n) than LYD(n).     

A Full Bayesian Approach to Curve and Surface Reconstruction

When interpolating incomplete data, one can choose a parametric model, or opt for a more general approach and use a non-parametric model which allows a very large class of interpolants. A popular non-parametric model for interpolating various types of data is based on regularization, which looks for an interpolant that is both close to the data and also smooth in some sense. Formally, this interpolant is obtained by minimizing an error functional which is the weighted sum of a fidelity term and a smoothness term.The classical approach to regularization is: select optimal weights (also called hyperparameters) that should be assigned to these two terms, and minimize the resulting error functional.However, using only the optimal weights does not guarantee that the chosen function will be optimal in some sense, such as the maximum likelihood criterion, or the minimal square error criterion. For that, we have to consider all possible weights.The approach suggested here is to use the full probability distribution on the space of admissible functions, as opposed to the probability induced by using a single combination of weights. The reason is as follows: the weight actually determines the probability space in which we are working. For a given weight , the probability of a function f is proportional to exp(– f² _uu du) (for the case of a function with one variable). For each different , there is a different solution to the restoration problem; denote it by f. Now, if we had known , it would not be necessary to use all the weights; however, all we are given are some noisy measurements of f, and we do not know the correct . Therefore, the mathematically correct solution is to calculate, for every , the probability that f was sampled from a space whose probability is determined by , and average the different f's weighted by these probabilities. The same argument holds for the noise variance, which is also unknown.Three basic problems are addressed is this work: Computing the MAP estimate, that is, the function f maximizing Pr(f/D) when the data D is given. This problem is reduced to a one-dimensional optimization problem. Computing the MSE estimate. This function is defined at each point x as f(x)Pr(f/D) f. This problem is reduced to computing a one-dimensional integral.In the general setting, the MAP estimate is not equal to the MSE estimate. Computing the pointwise uncertainty associated with the MSE solution. This problem is reduced to computing three one-dimensional integrals.     

A variotherm mold for micro metal injection molding

In this paper, a variotherm mold was designed and fabricated for the production of 316L stainless steel microstructures by micro metal injection molding (MIM). The variotherm mold incorporated a rapid heating/cooling system, vacuum unit, hot sprue and cavity pressure transducer. The design of the variotherm mold and the process cycle of MIM using the variotherm mold were described. Experiments were conducted to evaluate the molded microstructures produced using variotherm mold and conventional mold. The experiments showed that microstructures of higher aspect ratio such as 60 m × height 191 m and 40 m × height 174 m microstructures could be injection molded with complete filling and demolded successfully using the variotherm mold. Molded microstructures with dimensions of 60 m × height 191 m were successfully debound and sintered without visual defects.     

Types with intersection: An introduction

This paper is an informal introduction to the theory of types which use a connective for the intersection of two types and a constant for a universal type, besides the usual connective for function-types. This theory was first devised in about 1977 by Coppo, Dezani and Sallé in the context of-calculus and its main development has been by Coppo and Dezani and their collaborators in Turin. With suitable axioms and rules to assign types to-calculus terms, they obtained a system in which (i) the set of types given to a term does not change under-conversion, (ii) some interesting sets of terms, for example the solvable terms and the terms with normal form, can be characterised exactly by the types of their members, and (iii) the type-apparatus is not so complex as polymorphic systems with quantifier-containing types and therefore probably not so expensive to implement mechanically as these systems.There are in fact several variant systems with different detailed properties. This paper defines and motivates the simplest one from which the others are derived, and describes its most basic properties. No proofs are given but the motivation is shown by examples. A comprehensive bibliography is included.     

Modelling default and likelihood reasoning as probabilistic reasoning

This paper presents a probabilistic analysis of plausible reasoning about defaults and about likelihood. Likely and by default are in fact treated as duals in the same sense as possibility and necessity. To model these four forms probabilistically, a logicQDP and its quantitative counterpartDP are derived that allow qualitative and corresponding quantitative reasoning. Consistency and consequence results for subsets of the logics are given that require at most a quadratic number of satisfiability tests in the underlying prepositional logic. The quantitative logic shows how to track the propagation error inherent in these reasoning forms. The methodology and sound framework of the system highlights their approximate nature, the dualities, and the need for complementary reasoning about relevance.Much of this research was done while at the University of Technology, Sydney, Broadway, NSW, Australia, and some at the Turing Institute, 36 Nth. Hanover Str., Glasgow, Scotland.     

Nonblockability of Switches with the Cayley Graph Structure for Serial Transfer of Data Blocks. Generalized Hypercubes and Multidimensional Grids

A general method of conflictless arbitrary permutation of large data elements that can be divided into a multitude of smaller data blocks was considered for switches structured as the Cayley graphs. The method was specified for arbitrary permutations in the generalized hypercubes and multidimensional grids, and their characteristics were considered.     

A note on dimensions and factors

In this short note, we discuss several aspectsof dimensions and the related constructof factors. We concentrate on those aspectsthat are relevant to articles in this specialissue, especially those dealing with the analysisof the wild animal cases discussed inBerman and Hafner's 1993 ICAIL article. We reviewthe basic ideas about dimensions,as used in HYPO, and point out differences withfactors, as used in subsequent systemslike CATO. Our goal is to correct certainmisconceptions that have arisen over the years.     

Comparing text editions with the aid of the computer

The aim of this paper is to reveal the limitations of relying on fingerprint formulas or signature positions to identify printed editions, in the manner of the STCN project. The paper proposes that scanned images of texts be used to identify editions.Ben J. P. Salemans is a philologist with special interest in the use of the computer as a scientific tool in literary, philological and cultural-historical research. His Ph.D. project is a study of automated text-genealogical research. He works as a computer consultant at the UCI computer centre of the University of Nijmegen.Dedicated to the memory of Marcel te Wilt ( 1993).