Aniline/Ag+ to polyaniline/Ag nanocomposite in the presence of sodium dodecyl sulfate and phenylene diamine

Silver ion oxidized effectively aniline monomer in the presence of p‐phenylene diamine (PDA) promoter in sodium dodecyl sulfate (SDS) micellar medium to polyaniline/silver nanocomposite (PANI/Ag). To compare the results obtained, a sample of PANI polymer lacking Ag nanoparticles was also synthesized by a similar manner using ammonium peroxydisulfate instead of silver ion as the reaction oxidant. The use of PDA promoter/SDS emulsifier system could on one hand decrease the reaction time compared to those of reported previously, and on the other hand, allow the as‐reduced silver particles to stay nanosized. The Ag‐loaded PANI nanocomposite was structurally confirmed using Fourier transform‐infrared and X‐ray diffraction techniques. The uniformly‐dispersed Ag nanospheres with average particle size of ∼20 nm were clearly detectable in the bright‐field micrographs obtained from transmission electron microscopy. Furthermore, thermogravimetric analysis showed that major losses of the mass occurred at two temperature regions including 150–375°C and 375–800°C. POLYM. COMPOS., 36:253–256, 2015. © 2014 Society of Plastics Engineers     

Polyaniline/silver nanocomposites synthesized via UV–Vis‐assisted aniline polymerization with a reversed micellar microemulsion system

Polyaniline (PANI)/silver (Ag) nanocomposites were successfully synthesized within a sodium dodecyl sulfate reverse micro‐emulsion system and characterized by Fourier transform infrared spectroscopy, X‐ray diffraction, ultraviolet spectrometry, thermogravimetric analysis, scanning electron microscopy, transmission electron microscopy, and electrochemical methods. The results show that the core‐shell nanoparticles of less than 100 nm may be synthesized with PANI as shell formed around a core of nanoparticle. PANI/Ag nanocomposite prepared by this method has better thermal stability, higher conductivity, and electrochemical performance. The maximum conductivity (95.5 S/cm) was obtained when W₀ (water‐oil ratio) is 22. Cyclic voltammograms results show that PANI/Ag prepared by this method has a high response current and large capacitance. Polarization results show that E_corr (174.1 mV) and I_corr (50.6 μA/cm²) are better than the results for PANI and for PANI/Ag prepared by micro‐emulsion method. PANI/Ag nanocomposites prepared by the current method have potential applications in electrode materials, capacitors, conductive adhesives, and anticorrosion materials. POLYM. COMPOS. 37:1064–1071, 2016. © 2014 Society of Plastics Engineers     

Ag/polyaniline nanocomposites: Synthesize,characterization, and application to the detection of dopamine and tyrosine

In this research, Ag/Polyaniline (PANI) nanocomposites were synthesized successfully by the chemical oxidative polymerization of aniline in the presence of 4‐aminothiophenol (4‐ATP) capped colloidal Ag nanoparticles (NPs). First, Ag colloidal NPs were prepared by borohydride reduction of AgNO₃ in the presence of 4‐ATP as a stabilizer. Then, polymerization of aniline in the presence of Ag NPs was carried out by ammonium persulfate as an oxidant at room temperature. TEM, SEM, XRD, FTIR, EDX, TGA, and UV–vis studies were done for the morphological, structural, thermal, and optical characterization of the Ag/PANI nanocomposite. Furthermore, Ag/PANI nanocomposites were immobilized on the surface of a glassy carbon electrode (GCE) and electroactivity behavior was investigated by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The obtained Ag/PANI modified GCE showed high catalytic activity for the oxidation of dopamine (DA) and tyrosine (Tyr). The peak current of differential pulse voltammograms of DA and Tyr increased linearly with their concentration in the ranges of 2.17–5.74 μM Tyr and 18.5–72.2 μM DA. The detection limits for DA and Tyr were 0.002 and 0.009 μM, respectively. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2780–2789, 2013     

Reversed micelle Synthesis of Ag/polyaniline nanocomposites via an in situ ultraviolet photo‐redox mechanism

Silver/polyaniline nanocomposites were synthesized in reversed micellar solution, and the reaction was performed via in situ reduction of silver nitrate in aniline by photolysis. The nanocomposites were characterized by ultraviolet‐visible spectroscopy, Fourier transform infrared spectroscopy, X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, thermo‐gravimetric analysis, differential scanning calorimetric analysis, and electrochemical methods. The results showed that the Ag/polyaniline nanocomposites are composed of nano‐sized particles of 15–30 nm that contain Ag domains of 10–15 nm. The electrical conductivity of an Ag/polyaniline pellet is 95.89 S cm⁻¹, whereas a polyaniline pellet is found to be 3.1 × 10⁻² S cm⁻¹. Ag/polyaniline composites also have a higher degradation temperature and specific capacitance, when compared with pure polyaniline. Potentiodynamic polarization showed the anodic shifting of the zero current potential and a lower exchange current density for the Ag/polyaniline composite. Compared with polyaniline, the Ag/polyaniline nanocomposite is a promising candidate for coatings with improved anticorrosion performance. POLYM. COMPOS.,, 2012. © 2012 Society of Plastics Engineers     

Nanocomposites of silver nanoparticle and dinonylnaphthalene disulfonic acid‐doped thermoreversible polyaniline gel

Silver/polyaniline‐dinonylnaphthalene disulfonic acid (PANI‐DNNDSA) gel nanocomposites are prepared from the reduction of silver salt by polyaniline in formic acid medium. Scanning electron micrographs (SEM) indicate the presence of three‐dimensional fibrillar network structure and the silver nanoparticles remain dispersed within the PANI‐DNNDSA fibrillar network. Differential scanning calorimetric (DSC) study shows reversible first‐order phase transition characterizing the composite to behave as a thermoreversible gel. Transmission electron micrographs (TEM) show a decrease of nanoparticle size with increasing AgNO₃ concentration. Wide angle X‐ray scattering (WAXS) patterns show lamellar structure in the gel as well as in the gel metal nanocomposites (GMNCs) and the two melting peaks in the DSC patterns correspond to the melting of monolayer and bilayer crystals produced from the interdigitation of DNNDSA tails anchored from PANI chains within the PANI lamella. The above melting points are greater in the GMNCs than that of pure gel indicating the formation of complex melting thermogram with crystallites produced from the anchored surfactants tails at the surface of Ag nanoparticles. The GMNCs show a higher thermal stability than that of pure PANI‐DNNDSA gel. PANI‐DNNDSA gel has an emission peak at 354 nm but fluorescence quenching occurs in the GMNCs and the emission peak becomes red shifted. Also in the UV–vis spectra the π band‐polaron band transition peak shows a red shift and the DC conductivity increases with increasing Ag nanoparticle concentration in the GMNCs. The current (I)–voltage (V) characteristic curves indicate Ohmic nature of conductivity of the gel and the current at the same voltage increases appreciably with increasing Ag nanoparticle concentration. These GMNCs are easily processible due to its thermoreversible nature. So, an easily processible, thermally stable and highly conducting DNNDSA‐doped PANI‐Ag gel nanocomposite with interesting photoluminescent property has been successfully developed suitable for optoelectronic applications. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers     

Room temperature preparation,electrical conductivity,and thermal behavior evaluation on silver nanoparticle embedded polyaniline tungstophosphate nanocomposite

An advanced nanocomposite, polyaniline tungstophosphate (PANI‐WP) cation exchanger, was synthesized by simple solution method and treated with silver nitrate resulting silver embedded PANI‐WP (PANI‐WP/Ag). Spectroscopic characterization of PANI‐WP/Ag was carried out by scanning electron microscopy, fourier transform infrared spectroscopy, UV‐Visible spectroscopy, and X‐ray diffraction. Electrical conductivity measurements and thermal effect on conductivity of PANI‐WP/Ag was studied after acid treatment. The dc electrical conductivity was found 3.06 × 10⁻³ S cm⁻¹ for HCl doped, measured by 4‐in line‐probe dc electrical conductivity measuring technique. Thermal conductivity is stable with all temperatures in isothermal studies showing excellent stability of PANI‐WP/Ag material. Hybrid showed better linear Arrhenius electric conducting response for semiconductors, stable upto 120°C. It was observed that conductivity is at the border of metallic and semiconductor region. POLYM. COMPOS., 37:2460–2466, 2016. © 2015 Society of Plastics Engineers     

Preparation and Characterization of Conductive Polyaniline/Silver Nanocomposite Films and Their Antimicrobial Studies

Silver (Ag) nanoparticles are known to hold an important place in nanotechnology, and studies herein present the preparation and characterization of Ag metallic nanoparticles bearing antibacterial properties. In situ polymerization was used to prepare the conductive polymer polyaniline (PANI) and polyaniline/silver (PANI/Ag) nanocomposites. Increases in electrical conductivities of the nanocomposite films were observed compared to neat PANI, whereby these increases may be a result of the Ag doping effect or its complex formation. Spectroscopic techniques, such as, UV–Vis, FTIR, and photoluminescence were used for the characterizations of PANI and PANI/Ag nanocomposites. UV–Vis and FTIR data showed the quinoid units along the polymer chain being affected, such that strong interactions between Ag nanoparticles and quinoidal sites of PANI were presumed. The PANI/Ag nanocomposites showed higher photoluminescence intensities than neat PANI. TGA analyzes were used to determine weight losses and thermostabilities of PANI and PANI/Ag nanocomposites. Scanning electron microscopy was used for morphological evaluations of the nanoparticles and films, where the micrographs revealed that Ag nanoparticles were well dispersed and isolated in nanocomposite films. The presence and distribution of the Ag nanoparticles in PANI film matrix were analyzed by EDX. Antimicrobial properties of the nanocomposite films obtained were also explored. POLYM. ENG. SCI., 59:E182–E194, 2019. © 2018 Society of Plastics Engineers     

One‐step synthesis of polyaniline nanofibers decorated with silver

Polyaniline (PANI)/silver (Ag) nanocomposites containing PANI nanofibers decorated with well‐dispersed Ag nanoparticles were obtained with interfacial polymerization. It was interesting that silver nitride affected not only the diameter and crystallinity of the PANI nanofibers but also their room‐temperature conductivity. The conductivity increased with increasing Ag loading up to 10 (molar ratio of aniline to silver nitride), but the conductivity moderately decreased with further increasing Ag loading. Scanning electron microscopy and X‐ray diffraction analysis results indicate that the diameter of the PANI nanofibers became smaller and smaller, and their crystallinity got better and better with increasing Ag loading. However, Fourier transform infrared analysis proved that the balance of oxidized and reduced units of PANI became big with increasing Ag loading, which may have resulted in the decreasing conductivity of PANI. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis of high conductivity Polyaniline/Ag/graphite nanosheet composites via ultrasonic technique

A new process for the synthesis of high conductivity polyaniline/Ag/graphite nanosheet (PANI/Ag/NanoG) composites was developed. Graphite nanosheet was prepared by treating the expanded graphite in aqueous alcohol solution using sonication, and a uniform silver film about 470 nm thick was obtained on graphite nanosheet surface via an improved electroless plating method. Then PANI/Ag/NanoG composites were fabricated via in situ polymerization of aniline monomer in the presence of silver coated graphite nanosheet through using ultrasonic technique. The sliver particles and composites were evidenced by scanning and transmission electron microscopy examinations, the results showed that the silver coated graphite nanosheet particles played an important role in forming conducting bridge in polyaniline matrix. According to the electrically test, the conductivity of the PANI/Ag/NanoG composites was dramatically increased compared with pure PANI. From the thermogravimetric analysis, the PANI/Ag/NanoG composites exhibited a beneficial effect on the thermal stability of pure PANI.     

Preparation of agcl/polyaniline nanocomposite in polyvinylalcohol matrix and its electrocatalytic activity

AgCl/polyaniline (PANI) nanocomposite was successfully synthesized in polyvinyl alcohol (PVA) matrix via a two‐stage process. Firstly, positively‐charged Ag nanoparticles (NPs) were prepared in the presence of 4‐aminothiophenole (4‐ATP) as stabilizer. Then, polymerization of aniline was carried out in PVA matrix in the presence of Ag NPs, HCl, and ammonium persulfate as oxidant. HCl solution played an important role in the preparation of resulted nanocomposite. Removal or changing of acidic medium to camphorsulfonic acid influenced on the structure and morphology of obtained composites. The composites were characterized by scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, energy‐dispersive X‐ray spectroscopy, ultraviolet–visible spectra, and Fourier transform infrared spectroscopy. Moreover, AgCl/PANI/PVA nanocomposite was immobilized on the surface of a glassy carbon electrode and showed enhanced electrocatalytic activity for the oxidation of dopamine (DA) in a neutral solution. The peak currents of differential pulse voltammograms of DA increased linearly with concentration in the ranges of 80–250 μM DA and the detection limit for DA was 17.2 μM. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42366.     

Nanocomposite of polyaniline and a layered niobate acid host: Synthesis,electrochemical studies,and photocatalytic properties

The synthesis of polyaniline (PANI) with H₄Nb₆O₁₇ (HNbO) to form PANI/HNbO lamellar nanocomposite by in situ polymerization using aniline (ANI) intercalation compound ANI/HNbO as the intermediate has been investigated. The properties of the samples were characterized by means of XRD, SEM, TEM, FT‐IR, UV–vis spectroscopy, and TG‐DTA. The in situ polymerization of ANI packed in a regular orientation in a mono‐ and bilayers (i.e., pseudo‐bilayers) structure within the HNbO interlayers led to PANI/HNbO nanocomposite powder using (NH₄)₂S₂O₈ as the catalyst with PANI monolayer packing orientation within the HNbO interlayers. PANI/HNbO nanocomposite showed improved thermal stability compared with original PANI by TG analysis. The PANI/HNbO nanocomposite was studied by cyclic voltammetry (CV), which indicated the good redox activity and electrochemical‐cycling stability in acidic solution. The interaction between PANI and nanosheets greatly affected the electrochemical behavior of PANI/HNbO nanocomposite. Two couples of redox peaks corresponded to two oxidation process of PANI in acid conditions. The PANI/HNbO nanocomposite exhibited much higher photocatalytic activities for the degradation of methylene blue (MB) in aqueous solution under visible light irradiation than HNbO itself. POLYM. COMPOS., 34:834–841, 2013. © 2013 Society of Plastics Engineers     

Synthesis of graphene/vitamin C template-controlled polyaniline nanotubes composite for high performance supercapacitor electrode

A graphene nanosheet/polyaniline nanotube (GPNT) composite is prepared for the first time by in-situ chemical oxidative polymerization of aniline using vitamin C as a structure directing agent. The vitamin C molecules lead to the synthesis of polyaniline (PANI) nanotubes through the development of rod-like assembly by H-bonding in an aqueous medium. The initially synthesized graphene oxide/polyaniline nanotubes composite is reduced to graphene using hydrazine monohydrate followed by re-oxidation and protonation of the PANI to produce the GPNT nanocomposite. This novel composite showed a high specific capacitance of 534.37 F/g and an excellent energy density of 74.27 Wh/kg at a constant current of 0.5 mA. Besides, the GPNT composite exhibited excellent cycle life with 91.4% specific capacitance retained after 500 charge-discharge cycles. The excellent performance is due to the synergistic combination of graphene which provides good electrical conductivity and mechanical stability, and PANI nanofiber which deals with good redox activity.     

Preparation and properties of 8‐hydroxyquinoline aluminum quinoline/polyaniline core–shell composite

Polyaniline (PANI) as an excellent conducting polymer material has been used to synthesize 8‐hydroxyquinoline aluminum quinoline/polyaniline (Alq₃/PANI) composites with core‐shell structure which is expected to form ultra‐conjugated system between core/shell and be used as organic electronic material. Alq₃ was coated by sodium dodecyl benzene sulfonate doped PANI via in situ polymerization of aniline on the surface of Alq₃. The morphology, structure crystallinity, and thermal stability of synthesized composite were characterized by Fourier transform infrared spectroscopy, X‐ray diffraction, scanning electron microscopy, and thermal gravimetric analysis. Results indicated that the composite is core‐shell structure and exhibits good thermal stability. Conductivity of composite was investigated and showed that Alq₃ as core in composite which improved the conductivity of pristine PANI, indicating that electronic interactive effect was formed between core and shell. POLYM. COMPOS., 36:272–277, 2015. © 2014 Society of Plastics Engineers     

Synthesis of a Graphite‐Polyaniline Nanocomposite and Evaluation of Its Electrochemical Properties

In this study, exfoliated graphite and a polyaniline (PANI)‐graphite nanocomposite were developed from in situ polymerization of aniline. Graphite nanosheets were synthesized from expandable graphite. The PANI‐graphite nanocomposite was characterized by Fourier transform infrared, X‐ray diffraction, scanning electron microscopy, and transmission electron microscopy. In addition, the electrochemical measurements, such as cyclic voltammetric curves, showed that the conductivity of the obtained nanocomposite increased. Therefore, the supercapacitor behavior of PANI improves with adding graphite.     

Carbon nanotubes/polyaniline nanocomposite coatings: Preparation,rheological behavior,and their application in paper surface treatment

Conventional cellulosic paper, rendered electro‐conductive, may hold considerable promise for diversified applications in such areas as electro‐magnetic interference shielding and energy storage. Here, an electro‐conductive cellulosic paper was prepared by surface application of multi‐walled carbon nanotubes (MWCNTs)/polyaniline (PANI) nanocomposites onto a conventional base paper. MWCNTs/PANI nanocomposites were prepared by in situ polymerization of aniline with different contents of MWCNTs and used as electro‐conductive filler for the fabrication of electro‐conductive surface‐coated paper. The achieved MWCNTs/PANI nanocomposites exhibited a core‐shell structure, as evidenced by TEM. Effects of feeding ratios of MWCNTs on the rheological behavior of nanocomposite coatings, as well as the mechanical properties and electrical conductivity of surface‐coated paper were studied. Results revealed that the rheological behavior of the nanocomposite coatings showed strong dependence on the MWCNTs content. Moreover, both the electro‐conductivity and mechanical properties of surface‐coated paper were improved as a function of surface application of MWCNTs/PANI nanocomposites, particularly, in presence of an optimum content of MWCNTs. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46329.     

Synthesis,characterization, and properties of new conducting polyaniline/copper sulfide nanocomposites

This article reports the facile synthesis of copper sulfide (CuS)/polyaniline (PANI) nanocomposites by in situ polymerization. The composites were characterized by scanning electron microscopy (SEM), UV–visible and Fourier transform infrared (FTIR) spectroscopy, X‐ray diffraction (XRD), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). SEM analysis showed that the metal sulfide nanoparticles were uniformly dispersed in the polymer matrix. The characteristic peaks in FTIR and UV–vis spectra of PANI were found to be shifted to higher wave numbers in PANI/CuS composite, which is attributed to the interaction of CuS nanoparticles with PANI chain. XRD pattern revealed the structurally ordered arrangement of polymer composite and this regularity increases with increase in concentration of nanoparticles. Glass transition temperature of the nanocomposite increased with increase in the concentration of nanoparticles and it indicated the ordered arrangement of the polymer composite than PANI. TGA studies indicated excellent thermal stability of polymer nanocomposite. The electrical properties of nanocomposites were studied from direct current and alternating current resistivity measurement. Conductivity, dielectric constant, and dissipation factor of the nanocomposite were significantly increased with the increase in CuS content in the nanocomposite. The enhancement of these properties suggests that the proposed PANI/CuS nanocomposites can be used as multifunctional materials for nanoelectronic devices. POLYM. ENG. SCI., 54:438–445, 2014. © 2013 Society of Plastics Engineers     

In situ fabrication of polyaniline‐silver nanocomposites using soft template of sodium alginate

Polyaniline (PANI)‐Ag nanocomposites were synthesized by in situ chemical polymerization approach using ammonium persulfate and silver nitrate as oxidant. Characterizations of nanocomposites were done by ultraviolet–visible ( UV–vis), Fourier transform infrared (FTIR), X‐ray diffraction (XRD), scanning electron microscopy, and transmission electron microscopy (TEM). UV–vis, XRD and FTIR analysis established the formation of PANI/Ag nanocomposites and face‐centered‐cubic phase of silver. PANInanofibers were of average diameter ～ 30 nm and several micrometers in length. Morphological analysis showed that the spherical‐shaped silver nanoparticles decorate the surface of PANI nanofibers. Silver nanoparticles of average diameter ～ 5–10 nm were observed on the TEM images for the PANI‐Ag nanocomposites. Such type of PANI‐Ag nanocomposites can be used as bistable switches as well as memory devices. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis of nano‐sized ZnO and polyaniline‐zinc oxide composite: Characterization,stability in terms of DC electrical conductivity retention and application in ammonia vapor detection

Nano‐sized particles of Zinc oxide (ZnO) were synthesized using a new chemical rout. The chemical oxidative polymerization of aniline in the presence of nano ZnO was employed to synthesize a polyaniline‐zinc oxide (PANI‐ZnO) nanocomposite. The material was characterized by using transmission electron microscopy, XRD, scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FTIR), and Thermogravimetric analysis (TGA). The conductivity measurements showed the resulting composites possessed higher conductivity as compared to pure polyaniline (PANI). The nanocomposite exhibited fairly sensitive towards solution of aqueous ammonia (NH₃), when it was exposed to various concentrations of NH₃ in an ambient room temperature. The results show that the sensor has good sensitivity and good repeatability upon repeated exposure to NH₃. PANI‐ZnO nanocomposite was also used to study electrical conductivity under isothermal conditions in the temperature range 50–130°C. The composite was found stable under ambient conditions below 90°C in terms of DC electrical conductivity retention. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Novel Ag/C nanocable/epoxy resin composite

Silver/carbon (Ag/C) nanocables were obtained in the presence of cetyltrimethylammonium bromide (CTAB) under hydrothermal conditions in order to modify epoxy resin. Nanocable is a nanocomposite of nanowire (core) wrapped with one or more outer layers (shell). Scanning electron microscopy and energy‐dispersive X‐ray spectroscopy proved that nanocables consist of a silver nanowire core and a carbon outer shell. The (Ag/C)/epoxy composites were prepared by compounding Ag/C nanocables and epoxy resin. An investigation of the thermal, mechanical, and dielectric properties of these composites showed that the thermal stability and dielectric constant of the composites were enhanced. Interestingly, the breakdown strength of the composites at room temperature increased. Normally, breakdown strength decreases when conducting fillers are added. Fracture morphology of the (Ag/C)/epoxy composite also showed increased toughness. The relationship between the properties and microstructure of the composite was discussed in detail to explain the mechanism behind the change in material properties. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

A convenient approach to synthesize stable silver nanoparticles and silver/polystyrene nanocomposite particles

In this study, silver nanoparticles were prepared by the reduction of silver nitrate in SDS+ isopentanol/styrene/H₂O reverse microemulsion system using sodium citrate as reducing agent. The Ag/PS nanocomposite particles were prepared by in situ emulsion polymerization of the styrene system containing silver nanoparticles that did not separate from the reaction solution. The polymerization dynamic characteristic was studied, at the same time, silver nanparticles and the encapsulation of composite particles were characterized by Fourier‐transform‐infrared spectroscopy (FTIR), transmission electron microscopy (TEM), X‐ray diffraction (XRD) measurement, UV–vis diffuse reflectance spectroscopy, and X‐ray photoelectron spectroscopy (XPS). The results of TEM and UV–vis absorption spectra showed that well‐dispersed silver nanoparticles have a narrow size distribution. XRD showed that Ag and Ag/PS nanocomposite particles were less than 10 and 20 nm in size, which is similar to those observed by TEM. The results of XPS spectra revealed that the microemulsion system can stabilize the silver nanoparticles from aggregation and provided supporting evidence for the polystyrene encapsulated silver nanoparticle structure. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008.