Enhanced catalytic activity of NiM (M = Cr,Mo, W) nanoparticles for hydrogen evolution from ammonia borane and hydrazine borane

In this work, a series of Ni_1-xM_x (M = Cr, Mo, W) nanoparticles (NPs) have been successfully synthesized via a simple surfactant-aided co-reduction method and employed as highly efficient and cost effective catalysts for hydrogen generation from aqueous solution of ammonia borane (NH₃BH₃, AB) at room temperature. It is found that the as-synthesized NiM NPs (M = Cr, Mo, W) exhibit much higher catalytic performance for the hydrolysis of AB as compared to that of pure Ni NPs. In addition, among all the Ni_1-xM_x (M = Cr, Mo, W) NPs, the Ni_0.9Cr_0.1, Ni_0.9Mo_0.1, and Ni_0.8W_0.2 NPs show the highest catalytic activities with the turnover frequency (TOF) values of 10.7, 27.3 and 25.0 mol H₂ (mol metal min)^?1, respectively. Remarkably, these optimized NiM catalysts can also perform efficiently in the hydrolysis of hydrazine borane (N₂H₄BH₃, HB). The present low-cost and high-performance of the NiM catalysts system may encourage the practical application of AB and HB as the promising chemical hydrogen storage materials.     

Alloyed palladium-nickel hollow nanospheres with interatomic charge polarization for improved hydrolytic dehydrogenation of ammonia borane

Hydrolysis reaction of ammonia borane (AB) has been considered as a safe and efficient hydrogen generation method, in which designing cost-effective and high-performance catalysts plays vital role. In this work, we have developed well dispersed palladium-nickel hollow nanospheres (PdNi HNSs) with tunable shell thickness and compositions via a facile galvanic replacement approach. The as-prepared PdNi HNSs show composition-dependent catalysis in the hydrolytic dehydrogenation of AB. The Pd₈₄Ni₁₆/C exhibiting sphere-shaped hollow interiors with average 70 nm particle size and 10 nm thin wall, presents the highest catalytic activity with the turnover frequency of 76.0 (mol H₂ min^?1 (mol Pd)^?1) and the activation energy of 33.5 kJ mol^?1. The superior catalytic effect of PdNi HNSs in enhancing hydrolysis efficiency of AB can be ascribed to two major factors: (1) high active surface areas of the unique hollow structure; (2) enhanced H adsorption attributed to the coupling between Pd and Ni induces polarization charges on Pd catalytic sites, which is indicated by the first-principles calculation and X-ray photoelectron spectroscopy studies. Furthermore, the catalysts exert good long-term recycling stability and catalytic activity for the hydrolytic dehydrogenation of AB. This work represents a strategy may hopefully be extended to synthesize other Pd-based hollow nanostructure with reduced Pd usage and increased catalytic active sites, and also sheds light on the exploration of utilizing interatomic interactions to regulate species adsorption/activation for highly efficient catalytic performance.     

Carbon-supported small Rh nanoparticles prepared with sodium citrate: Toward high catalytic activity for hydrogen evolution from ammonia borane hydrolysis

Hydrogen generation from the hydrolysis of ammonia borane (AB) over heterogeneous catalysts is essential for practical applications. Herein, efficient hydrogen evolution from AB hydrolysis over the carbon-supported Rh nanoparticles synthesized with sodium citrate (Rh/C-SC) was achieved at 25 °C. The turnover frequency value of Rh/C-SC was 336 mol H₂ (mol_Rh min)^?1, whereas that of Rh/C catalyst only yielded a value of 134 mol H₂ (mol_Rh min)^?1. The improvement of the catalytic performance of Rh/C-SC catalyst could be attributed to the small Rh particles with highly active surface areas, which were prepared by using sodium citrate as the stabilizing agent. This result indicates that sodium citrate can be applied as a useful stabilizing agent for synthesizing active metal nanoparticles, thus highly promoting the practical application of AB system for fuel cells.     

Noble-metal-free Co@Co2P/N-doped carbon nanotube polyhedron as an efficient catalyst for hydrogen generation from ammonia borane

Developing an efficient catalyst for hydrogen (H₂) generation from hydrolysis of ammonia borane (AB) to significantly improve the activity for the hydrogen generation from AB is important for its practical application. Herein, we report a novel hybrid nanostructure composed of uniformly dispersed Co@Co₂P core-shell nanoparticles (NPs) embedded in N-doped carbon nanotube polyhedron (Co@Co₂P/N–CNP) through a carbonization-phosphidation strategy derived from ZIF-67. Benefiting from the electronic effect of P doping, high dispersibility and strong interfacial interaction between Co@Co₂P and N-CNTs, the Co@Co₂P/N–CNP catalyst exhibits excellent catalytic performance towards the hydrolysis of AB for hydrogen generation, affording a high TOF value of 18.4 mol H₂ mol metal^?1 min^?1 at the first cycle. This work provides a promising lead for the design of efficient heterogeneous catalysts towards convenient H₂ generation from hydrogen-rich substrates in the close future.     

Hydrogen evolution from hydrolysis of ammonia borane catalyzed by Rh/g-C3N4 under mild conditions

Developing effective catalysts for hydrogen evolution from hydrolysis of ammonia borane (AB) is of great significance considering the useful applications of hydrogen. Herein, graphitic carbon nitride (g-C₃N₄) prepared through the simply pyrolysis of urea was employed as a support for Rh nanoparticles (NPs) stabilization. The in-situ generated Rh NPs supported on g-C₃N₄ with an average size of 3.1 nm were investigated as catalysts for hydrogen generation from the hydrolysis of AB under mild conditions. The Rh/g-C₃N₄ catalyst exhibits a high turnover frequency of 969 mol H₂· (min·mol_Rh)^?1 and a low activation energy of 24.2 kJ/mol. The results of the kinetic studies show that the catalytic hydrolysis of AB over the Rh/g-C₃N₄ catalyst is a zero-order reaction with the AB concentration and a first-order reaction with the Rh concentration. This work demonstrates that g-C₃N₄ is a useful support to design and synthesis of effective Rh-based catalyst for hydrogen-based applications.     

Synthesis of bifunctional non-noble monolithic catalyst Co-W-P/carbon cloth for sodium borohydride hydrolysis and reduction of 4-nitrophenol

Amorphous Co-W-P catalysts, which were prepared on carbon cloth (CC) by electrodeposition, have been investigated as bifunctional non-noble catalysts for the hydrogen generation from alkaline NaBH₄ solution and the reduction of 4-nitrophenol by NaBH₄. Scanning electron microscopes (SEM), energy dispersive X-ray spectrometer (EDX), and X-ray diffraction (XRD) were used to characterize the Co-W-P/CC catalysts. The hydrogen generated catalytic properties of as-prepared catalysts with different content of P and the stability were investigated in the alkaline NaBH₄ solution of 5 wt% NaBH₄ and 2 wt% NaOH. The activation energy for hydrolysis of NaBH₄ by the Co-W-P catalyst was also probed at different temperature, and the results show that the obtained Co-W-P/CC catalysts exhibit very low apparent active energy (Ea = 27.18 kJ mol^?1). Finally, we detect the catalytic activity of Co-W-P/CC in the reduction of 4-nitrophenol for the first time, and it also presents outstanding catalytic capability with the apparent rate constant (k_app) of 11.91 × 10^?3 s^?1. These characteristics indicate that the Co-W-P/CC catalysts possess a potential application on both the sodium borohydride hydrolysis and reduction of 4-nitrophenol.     

CuO–NiO/Co3O4 hybrid nanoplates as highly active catalyst for ammonia borane hydrolysis

Dehydrogenation of hydrogen-rich chemicals, such as ammonia borane (AB), is a promising way to produce hydrogen for mobile fuel cell power systems. However, the practical application has been impeded due to the high cost and scarcity of the catalysts. Herein, a low-cost and high-performing core-shell structured CuO–NiO/Co₃O₄ hybrid nanoplate catalytic material has been developed for the hydrolysis of AB. The obtained hybrid catalyst exhibits a high catalytic activity towards the hydrolysis of AB with a turnover frequency (TOF) of 79.1 mol_H2 mol cat⁻¹ min⁻¹. The apparent activation energy of AB hydrolysis on CuO–NiO/Co₃O₄ is calculated to be 23.7 kJ.mol⁻¹. The synergistic effect between CuO–NiO and Co₃O₄ plays an important role in the improvement of the catalytic performance. The development of this high-performing and low-cost CuO–NiO/Co₃O₄ hybrid catalytic material can make practical applications of AB hydrolysis at large-scale possible.     

Alumina nanofiber-stabilized ruthenium nanoparticles: Highly efficient catalytic materials for hydrogen evolution from ammonia borane hydrolysis

Effective catalysts for hydrogen generation from ammonia borane (AB) hydrolysis should be developed for the versatile applications of hydrogen. In this study, ruthenium nanoparticles (NPs) supported on alumina nanofibers (Ru/Al₂O₃-NFs) were synthesized by reducing the Ru(Ш) ions impregnated on Al₂O₃-NFs during AB hydrolysis. Results showed that the Ru NPs with an average size of 2.9 nm were uniformly dispersed on the Al₂O₃-NFs support. The as-synthesized Ru/Al₂O₃-NFs exhibited a high turnover frequency of 327 mol H₂ (mol Ru min)^?1 and an activation energy of 36.1 kJ mol^?1 for AB hydrolysis at 25 °C. Kinetic studies showed that the AB hydrolysis catalyzed by Ru/Al₂O₃-NFs was a first-order reaction with regard to the Ru concentration and a zero-order reaction with respect to the AB concentration. The present work reveals that Ru/Al₂O₃-NFs show promise as a catalyst in developing a highly efficient hydrogen storage system for fuel cell applications.     

Highly efficient and reactivated electrocatalyst of ruthenium electrodeposited on nickel foam for hydrogen evolution from NaBH4 alkaline solution

Cyclic life of catalyst for hydrolysis of sodium borohydride is one of the key issues, which hinder commercialization of hydrogen generation from sodium borohydride (NaBH₄) solution. This paper is aimed at promoting the cyclic life of Ru/Ni foam catalysts by employing an electro-deposition method. The effect of hydrolysis parameters on hydrolysis of sodium borohydride was studied for improving the catalytic performance. It is found that the hydrogen generation rate (HGR) of the hydrolysis reaction catalyzed by Ru/Ni foam catalyst can reach as high as 23.03 L min^?1 g^?1 (Ru). The Ru/Ni foam catalyst shows good catalytic activity after a cycleability test of 100 cycles by rinsing with HCl, which is considered as more effective method than rinsing with water for recovering the performance of Ru/Ni foam catalyst.     

Highly stable and controllable CoB/Ni-foam catalysts for hydrogen generation from alkaline NaBH4 solution

In this work, a series of shaped CoB/Ni-foam catalysts were directly synthesized by using a convenient and simple electroless plating method. Despite the low loading amount of CoB, the catalysts showed high catalytic performance in the hydrolysis of NaBH₄ solution, and the maximum hydrogen generation rate reached 1930 mL min^?1 (g CoB)^?1 in 1 wt % NaBH₄ + 5 wt % NaOH solution at 293 K. The catalysts demonstrated distinct stability, and the hydrogen generation rate was almost unchanged after 6 cycles. Furthermore, the catalysts could be easily recovered from the reaction system by a magnet. These characteristics make CoB/Ni-foam a high performance and cost effective catalyst for practical applications of hydrogen generation.     

Facile construction of composition-tuned ruthenium-nickel nanoparticles on g-C3N4 for enhanced hydrolysis of ammonia borane without base additives

Developing high-efficiency and low-cost catalysts for hydrogen evolution from hydrolysis of ammonia borane (AB) is significant and critical for the exploitation and utilization of hydrogen energy. Herein, the in-situ fabrication of well-dispersed and small bimetallic RuNi alloy nanoparticles (NPs) with tuned compositions and concomitant hydrolysis of AB are successfully achieved by using graphitic carbon nitride (g-C₃N₄) as a NP support without additional stabilizing ligands. The optimized Ru₁Ni_7.5/g-C₃N₄ catalyst exhibits an excellent catalytic activity with a high turnover frequency of 901 min^?1 and an activation energy of 28.46 kJ mol^?1 without any base additives, overtaking the activities of many previously reported catalysts for AB hydrolysis. The kinetic studies indicate that the AB hydrolysis over Ru₁Ni_7.5/g-C₃N₄ is first-order and zero-order reactions with respect to the catalyst and AB concentrations, respectively. Ru₁Ni_7.5/g-C₃N₄ has a good recyclability with 46% of the initial catalytic activity retained even after five runs. The high performance of Ru₁Ni_7.5/g-C₃N₄ should be assigned to the small-sized alloy NPs with abundant accessible active sites and the synergistic effect between the composition-tuned Ru–Ni bimetals. This work highlights a potentially powerful and simple strategy for preparing highly active bimetallic alloy catalysts for AB hydrolysis to generate hydrogen.     

Enhanced catalytic behavior of h-BN supported CuNi bimetallic catalysts in hydrolytic dehydrogenation of NH3BH3

The hydrolysis of ammonia borane (NH₃BH₃, AB) is an efficient strategy for high-purify hydrogen evolution. However, it is indispensable to develop a suitable catalyst because this reaction is kinetically infeasible at room temperature. In this work, we prepared a series of nano hexagonal boron nitride (h-BN) supported CuNi bimetallic catalysts through a facile adsorption-chemical reduction procedure. The effects of various molar ratios of Cu to Ni and CuNi loadings on AB hydrolysis were investigated in details. Benefitting from the proper porous structure, the interesting alloy effect of Cu and Ni, as well as the synergistic effect between h-BN and CuNi, 20 wt% Cu_0.5Ni_0.5/h-BN displays the highest catalytic activity among the as-prepared catalysts. Apart from satisfactory durability, the corresponding hydrogen generation rate, turnover frequency at 303 K in base solution and apparent activation energy are 2437.0 mL g^?1 min^?1, 6.33 min^?1 and 23.02 kJ mol^?1, respectively, which are very outstanding compared with many previous results. Our work not only provides a proper non-precious metal catalyst for hydrogen generation from the hydrolysis of chemical hydrogen storage materials but also offers a facile strategy for synthesizing metallic functional materials.     

rGO supported PdNi-CeO2 nanocomposite as an efficient catalyst for hydrogen evolution from the hydrolysis of NH3BH3

The hydrogen economy is a proposed system that utilizes hydrogen to deliver energy. For the realization of this concept, how to safely, controllably and reversibly store and release hydrogen are critical problems which must be resolved. Metal alloys combined with suitable support materials are widely applied to various catalytic reactions. Here palladium nickel bimetallic nanoparticles doped with cerium oxide on a reduced graphene oxide (rGO) support were prepared by combining metal ion precursors and graphene oxide in a one-pot co-reduction approach. The as-received catalysts were characterized by XRD, TEM, SEM, XPS and ICP-OES, and the results revealed that PdNi-CeO₂ nanoparticles were uniform dispersal on rGO. The as-synthesized PdNi-CeO₂/rGO had been adopted as a heterogeneous catalyst for the hydrogen evolution from the hydrolysis of ammonia borane (NH₃BH₃, AB) at room temperature. Kinetically, the hydrogen-release rate was first-order with the increased concentration of catalysts. The optimized catalyst of Pd_0.8Ni_0.2-CeO₂/rGO with the CeO₂ content of 13.9 mol% exhibited an excellent activity with a turnover frequency value of 30.5 mol H₂ (mol catalyst)^?1 min^?1 at 298 K, and a low apparent activation energy (E_a) of 37.78 kJ mol^?1. The robust catalytic performance of the Pd_0.8Ni_0.2-CeO₂/rGO is attributed to the uniform controlled nanoparticle size, the synergic effect between the nanoparticles bimetallic properties, and the effective charge transfer interactions between the metal and support.     

Nanosizing ammonia borane with nickel – An all-solid and all-in-one approach for H2 generation by hydrolysis

Ammonia borane NH₃BH₃ (AB) and nickel (Ni) have been considered together as an all-solid and all-in-one material for H₂ generation by hydrolysis at 20–50 °C. Our novel approach, denoted Ni/AB, consists of AB nanoparticles within a Ni matrix. Upon contact with water, Ni/AB readily hydrolyzes and liberates H₂ with a turnover frequency of 13.8 mol(H₂) mol_Ni^?1 min^?1 at 43.3 °C. The apparent activation energy, determined over the temperature range 23.5–50.4 °C, is low, with 19.5 ± 4.1 kJ mol^?1. These results imply that such a Ni matrix embedding AB acts as an effective catalyst. Beyond the catalytic performance, this is the first report of the successful utilization of an all-solid and all-in-one approach for the hydrolysis of AB, and the work brings unique perspectives for one-shot catalytic systems.     

Hydrogen generation from alkaline NaBH4 solution using a dandelion-like Co–Mo–B catalyst supported on carbon cloth

In this study, a dandelion-like Co–Mo–B catalyst was prepared on carbon cloth (CC) by two-step electrodeposition method for the first time. The composition and microscopy are characterized by XRD and SEM technology. The results revealed that the as-synthesized Co–Mo–B catalyst exhibited high hydrogen generation rate (1280.80 mL min^?1 g^?1) and low activation energy (51.0 kJ mol^?1) for the hydrolysis of alkaline NaBH₄ solution. The results reveal that the reason might be due to high specific surface of the novel dandelion-like nanostructure and the synergistic effect of Co, Mo and B. Moreover, the catalytic activity was closely related to NaOH concentration, and OH^– anions were competitive with BH₄^– anions in alkaline NaBH₄ solution to transfer to the catalyst surface.     

Experimental studies on the catalytic behavior of alloy and core-shell supported Co-Ni bimetallic nano-catalysts for hydrogen generation by hydrolysis of sodium borohydride

Monometallic (Co) and bimetallic (Co-Ni and Co-Cu) oxides catalysts supported on the almond based activated carbon (AC) were prepared by the heterogeneous deposition-precipitation method. The activity of these catalysts was evaluated as a function of reaction temperature, NaOH, and NaBH₄ concentration. Several analysis methods including XRD, XPS, FTIR, TEM, FESEM, ICP-OES, and BET were applied to characterize the structure of prepared samples. Well-dispersed supported bimetallic nano-catalysts with the size of particles below 20 nm were formed by using nickel and copper oxides as a promoter which was confirmed by XRD and TEM techniques. Surface composition of alloy and core-shell cobalt-nickel oxides catalysts was analyzed by ICP-OES which was in a good agreement with nominal content during catalyst preparation. The performance of bimetallic cobalt-nickel oxides catalysts indicated the synergic effect between cobalt and nickel in comparison with monometallic and bimetallic cobalt-copper samples for hydrogen production. Maximum hydrogen generation rate was measured for the supported core-shell catalyst as named Ni1/Co3/AC. The reaction rate increased with increasing the temperature of the alkaline solution as a significant parameter while other operating conditions were kept constant. The optimal values for NaOH and NaBH₄ content were calculated to be 10 wt % for both variables at 30 °C. Hydrogen production rates were calculated to be 252.0, 310.8 and 658.8 mL min^?1.g^?1 by applying Co3/Ni1/AC, Co3-Ni1/AC (alloy) and Ni1/Co3/AC at 30 °C in 5 wt % NaBH₄ and 5 wt % NaOH solutions, respectively. Obtained activation energy (50 kJ mol^?1) illustrated that the suitable catalysts were synthesized for hydrogen generation. The experimental study showed that the hydrolysis of NaBH₄ was a zero-order type reaction with the respect to the sodium borohydride concentration. A semi empirical kinetic model was derived at the various temperatures and NaOH concentrations.     

Copper oxide hollow spheres: Synthesis and catalytic application in hydrolytic dehydrogenation of ammonia borane

In this paper, CuO hollow microspheres with different shell thickness and porosity have been synthesized using carbonaceous saccharide microspheres as templates according to a modified literature method. These CuO hollow microspheres were characterized and their catalytic properties in the hydrolytic dehydrogenation of ammonia borane (NH₃BH₃, AB) were examined. A kinetic study indicated that a maximum hydrogen generation rate of 294 mL H₂ min^?1 (g catalyst)^?1 can be achieved at 45 ± 0.2 °C in the present system, which is comparable with that for other reported Cu based catalysts.     

Cobalt nanoparticles supported on magnetic core-shell structured carbon as a highly efficient catalyst for hydrogen generation from NaBH4 hydrolysis

A novel recyclable cobalt nanocatalyst, supported on magnetic carbon with core-shell structure, was successfully synthesized by using wetness impregnation-chemical reduction method for hydrogen generation from hydrolysis of NaBH₄. The resultant nanocomposite was characterized to determine the structural and physical-chemical properties by a series of analytical techniques such as FT-IR (Fourier transform infrared spectroscopy), XRD (X-ray diffraction), SEM (scanning electron microscope), EDX (energy-dispersive X-ray spectroscopy), TEM (transmission electron microscopy), etc. The results demonstrated that amorphous cobalt nanoparticles were homogeneously surrounded on the surface of the support due to having abundant hydrophilic groups (such as aldehyde and hydroxyl groups) on the surface of carbon layer for the effective immobilization of metal ions. The supported catalyst showed superior catalytic performance towards the hydrolysis reaction of NaBH₄ at room temperature. The total rate of hydrogen generation and activation energy were calculated to be 1403 ml H₂ g_cat^?1 min^?1 and 49.2 kJ mol^?1, respectively, which were comparable to the values of most cobalt-based catalyst reported for hydrogen production from hydrolysis of NaBH₄. Additionally, reusability test revealed that the hydrogen in NaBH₄ substrate could be completely released within 25 min with a minimum hydrogen generation rate of 832 ml H₂ g_cat^?1 min^?1 even after five runs of hydrolytic reaction, implying the as-prepared Co/Fe₃O₄@C composite could be considered as a promising candidate catalyst for portable hydrogen fuel system such as PEMFC (proton exchange membrane fuel cells).     

PVP-stabilized platinum nanoparticles supported on modified silica spheres as efficient catalysts for hydrogen generation from hydrolysis of ammonia borane

Ammonia borane (AB) is considered to be a promising solid hydrogen carrier. In this work, poly(N-vinyl-2-pyrrolidone) (PVP)-protected platinum nanoparticles are supported on γ-methacryloxypropyltrimethoxysilane (γ-MPS) modified silica spheres (Pt-PVP/SiO₂(M)), which are firstly used as highly efficient catalysts for hydrolysis of AB. Platinum nanoparticles possess a tiny size of 2–3 nm and are uniformly dispersed over modified silica spheres. Pt-PVP/SiO₂(M) catalysts with a Pt loading amount of 1.30 wt% show the highest catalytic activity with a turnover frequency (TOF) value of 371 mol_H2 mol_Pt^?1 min^?1 (866 mol_H2 mol_Pt^?1 min^?1 corrected for the surface atoms) at 25 °C. The activation energy is calculated to be 46.2 kJ/mol. Furthermore, owing to the synergistic effect between the modifier of silica spheres and the capping agent of metal nanoparticles, Pt-PVP/SiO₂(M) catalysts have a higher loading amount (8.7 and 6.5 times) and TOF value (4.8 and 5.5 times) than the counterparts prepared without γ-MPS and PVP, respectively.     

Facile synthesis of flower-like Au@AuPd nanocrystals with highly electrocatalytic activity for formic acid oxidation and hydrogen evolution reactions

Herein, a one-pot co-reduction method was developed to prepare flower-like Au@AuPd core-shell nanocrystals (Au@AuPd NCs) under the guidance of 2,4-diamino-6-hydroxypyrimidine (DAHP). The product was mainly characterized by microscopic measurements, X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) analysis, and its formation mechanism was discussed in details. The architectures showed much larger electrochemical active surface area (62.68 m² g^?1_Pd) than commercial Pd black (8.23 m² g^?1_Pd), together with the higher mass activity (1250 mA mg^?1) for formic acid oxidation reaction (FAOR). Besides, the catalyst displayed improved catalytic features for hydrogen evolution reaction (HER) relative to Pd black and Pt/C catalysts. These indicate the potential applications of the catalyst in energy storage and transformation.