有限宽度和椭圆孔形状对缺口层合板强度预测的影响

本文采用有限元方法对正交各向异性材料含有不同椭圆孔形状的有限宽度板作了分析,给出了有限宽度和椭圆孔形状对应力集中因子K₁和孔边应力分布σ_y(x,0)的影响公式。数值结果表明:正交各向异性板的有限宽度和椭圆孔形状对K_r和σ_y(x,0)的影响均与各向同性材料不同,所以有限宽度和椭圆孔形状将对缺口层合板强度的预测产生影响。      

复合材料加筋板的动力分析

本文构造了九自由度三角形拟协调罚函数复合材料板单元与六自由度复合材料梁单元,考虑了剪切变形与转动惯量的影响。用这两种单元对复合材料加筋板的自由振动、阻尼特性和瞬态响应问题进行了研究,给出一些有益结果。      

让七十多年前的影片《迷途的羔羊》重返银幕

中国电影资料馆珍藏着大量早期影片,其中许多具有珍贵的保存价值.1936年由蔡楚生编导、任光谱曲的<迷途的羔羊>是我国第一部以流浪儿童为题材的影片,也是我国儿童影片中的第一部有声片.此片在思想和艺术上都取得了突破,尤其是以童谣形式演唱的主题歌<月光光歌>感人至深,充分发挥了音乐的魅力,增强了整部影片的感染力.影片公映后,深受广大观众的欢迎和电影工作者的赞扬.七十多年过去了,当我们准备再次让它同观众见面时,却发现能够最真实、最原始记录影音效果的原底、声底片却出现了许多问题,给复制工作带来了空前的难度,这是我们从事资料影片复制工作三十多年来从未遇到过的难题.主要有以下几方面问题:     

冷轧薄宽带钢局部型中浪瓢曲变形行为研究

针对薄宽带钢冷轧过程中易发多发的局部型中浪瓢曲缺陷,引入非均匀载荷宽度、弹性约束系数及平均张应力建立了屈曲变形的解析计算模型。应用能量最低原理对屈曲变形区域进行搜索求解,得到了局部型中浪屈曲临界条件(包括临界应力、屈曲波长和屈曲波宽),获得了其与非均匀载荷宽度、弹性约束系数、平均张应力的关系,并发现平均张应力是产生局部型中浪的重要影响因素。应用样条有限元方法对局部型中浪进行数值仿真分析,验证了屈曲解析计算方法的正确性。在实验轧机上进行了轧制研究,通过轧制获得了局部型中浪屈曲模态,对实验结果分析得到了相对应的屈曲临界条件,与解析法和样条有限元法结果基本吻合,证明了样条有限元计算方法与解析计算方法的正确性及其工程应用价值。     

热力公司锅炉附属仪表使用及检定情况

目前在新疆的供热公司大多存在着麻痹思想,对锅炉的附属仪表均不够重视,因此导致的安全隐患几乎都没有意识到.     

地震吓不倒档案人

2008年5月12日下午,一场史无前例的特大地震突袭四川,造成了巨大的生命财产损失.东方电气集团东方电机有限公司位于德阳市旌阳区,离震中的直线距离不到80公里,地震烈度达到7度,许多房屋损坏,属于重灾区.灾害发生后,由于组织及时,措施得力,档案部门全体职工在几分钟内有序地撤离到安全地带,无一伤亡.     

加拿大国家档案馆珍藏概览(5)——镜头中的加拿大

1989年是照片诞生后的第150周年.自从第一次将光影与化学结合起来用于从大自然中获得永恒的图片后,自然风光摄影就倍受争议.不管怎样,无论艺术还是科学,技艺还是职业,摄影都是产生于客观性与选择性之间,创造性与现实性之上的一种档案媒介.在最新的一次统计后,国家档案馆现今保存有1500万以上的照片档案.不管是百年前拍摄的还是上个星期刚刚拍摄的,照片所要传递出的要素通常是些非常独特的信息.无论照片、底片和幻灯片,是黑白的还是彩色的,无论旧与新,不管是退色了的还是色彩艳丽的,单独的还是成集合的,最为关键的是它们都见证了加拿大历史与社会的发展与兴衰.     

世界著名帐篷露营地

<正>住在帐篷露营地被认为是最经济实惠的旅行住宿方式,特别是在欧美国家,帐篷营地的费用通常比附近价格最为低廉的旅店还要便宜。如今,帐篷营地已经成为一项产业并且发展得非常成熟,大多数都配有能够满足生活需要的基础设施,比如厕所、淋浴间、洗衣房等,很多还配有丰富的活动场所和设备。除此之外,     

DCI为什么要求数字影院放映系统的分辨率为4K或2K

上世纪90年代初,美国电影电视工程师学会"数字影像层级结构"特别工作小组对成像系统的空间分辨率要求进行了研究.该小组从分辨率的角度将显示器分为低分辨率、常规分辨率、高分辨率和超高分辨率等四个层级.该小组基于以下几个基本概念,提出了空间分辨率层级的设计理念:--基于常用的数字处理和存储体系结构的一种层级整数递进;--支持基于影像贴片(image tile)的各种宽高比和空间分辨率;--能够利用适宜分辨率的贴片,针对任何应用要求来构建显示器.通过使用贴片和仅仅四个分辨率层级,便有可能构建出适用于任何用途的新显示器,而且这种显示器还可以用于显示来自任何其它层级的影像.美国数字电影倡导组织(DCI)要求数字影院放映系统的分辨率为4K或2K,属超高分辨率或高分辨率的级别.     

Mixed-dimensional van der Waals heterojunction-enhanced Raman scattering

Van der Waals heterojunctions(vdWHs)provide an excellent material system for the research of heterojunction-enhanced Raman scattering(HERS)due to their complexity and diversity.However,the traditional two-dimensional vdWHs are not conducive to the full utilization of near-field light due to the limitation of single dimension.Herein,we fabricate T-shaped mixed-dimensional SnSe₂/ReS₂ vdWHs via chemical vapor deposition and wetting transfer method,and demonstrate that the mixed-dimensional vdWHs can be used as ultrasensitive HERS chips based on the effective photo-induced charge transfer.Besides,the radiative energy transfer effect enhanced by near-field light further magnifies the HERS signals,improving the detection limit of rhodamine 6G(R6G)to femtomolar level.Furthermore,we demonstrate that the ultrasensitive screening of crystal violet in multicomponent solutions adsorbed on SnSe₂/ReS₂ vdWHs can be achieved by adjusting the laser wavelength,which has not been achieved by noble metal materials.This work provides new insights into the mixed-dimensional vdWHs and demonstrates the great application potential of T-shaped heterojunctions.     

热交换器的分类及优缺点分析

热交换器是将不同温度介质之间的热量通过热传导的形式,由高温介质传递给低温介质,使介质达到生产所需温度的工艺设备,也可作为一种节能设备使用.通过对不同热交换器的结构分析,总结不同热交换器的优缺点、适用环境,为生产工艺设计人员及设备制造单位在选择可降低能耗、提高效率的设备上提供参考.     

聚苯胺及其复合物的制备和结构及形貌分析

通过化学氧化法分别制备盐酸,盐酸和十二烷基苯磺酸,碳纳米管(MWNTs-COOH)掺杂的聚苯胺,利用红外光谱,紫外光谱,扫描电子显微镜和透射电子显微镜对所制备聚苯胺的结构和形貌进行分析。分析不同掺杂物对聚苯胺的结构和形貌的影响;同时研究了超声波作用对聚苯胺形貌以及聚苯胺包裹MWNTs-COOH情况的影响。     

Thermodynamic similarity and prediction of the properties and characteristics of substances and processes

Principles of the theory of thermodynamic similarity are considered in application to all aggregate states of a substance, including phase transitions, and to the change in dissipative structures in open systems.Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 53, No. 5, pp. 709–716, November, 1987.     

Modelling and computation of curing and damage of thermosets

The curing of thermosets is a complex process involving the transition from a fluid into a (visco-) elastic solid. This phase transition comes along with an increase in stiffness and a volume shrinkage of the polymer. The latter may lead to severe residual strains and stresses, which in turn can cause damage in the final, usually quasi-brittle material. In this contribution a constitutive model is developed which takes into account the curing of a thermosetting material together with the process-induced damage as resulting from curing shrinkage. The curing of the material is governed by a phenomenological hypoelastic constitutive equation which includes temporal evolutions for stiffness and volume shrinkage. Thermal and viscous effects are neglected in the present study. An isotropic gradient-enhanced damage model is adapted to describe the damage evolution. The curing-damage model is implemented into a finite element code and numerical examples for thermosetting materials demonstrate that the proposed model is capable to predict cure-induced damage in thermosets.     

碳化硼陶瓷增韧补强和致密化研究现状及其展望

碳化硼陶瓷具有极高的硬度,然而其低韧性、低抗弯强度、难以致密化限制了它的广泛应用.已有一些研究集中于碳化硼陶瓷增韧补强和致密化,对这一方面国内外研究进展进行了归纳与评述,阐明各种增韧补强和致密化方法的优缺点,提出碳化硼陶瓷增韧补强和致密化研究值得发展的一些方向.     

Measurement and analysis of elastic and anelastic properties of alumina and silicon carbide

Measurements of dynamic Young's modulus, E, and damping as a function of temperature, T, were made for alumina and silicon carbide. The Young's modulus data were compared with some from the literature, and analysed in terms of a theoretical framework relating the Debye temperature, θD, with the elastic constants. For both materials this analysis yielded a ratio T₀/θ_D which was near 0.4, where T₀ is an empirical fitting constant for the plot of (E(0)−E)/T versus 1/T (E(0) is the value of E at 0 K). The analysis of the damping data in terms of an Arrhenius type dependence led to effective activation energies near kT, where k is Boltzmann's constant. This revised version was published online in November 2006 with corrections to the Cover Date.     

Mechanisms of Corosion and Oxidation of Metals and Alloys

Selected topics in field of the study of the mechanisms of corrosion and of oxidation of metals or alloys are presented. The first part reports a new model for the mechanism of the breakaway oxidation of ferritic stainless steels in water vapour. The second part is devoted to the physico‐chemical aspects of oxidation and presents experimental methods useful in the kinetic modelling applied to two alloys, the zircalloy‐4 and an AlMg5 % in the liquid state. In the third part the physical and numerical modelling of the stress corrosion cracking behaviour in face‐centered cubic (fcc) alloys is detailed, which enables the study of the influence of macroscopic parameters (such as the temperature or hydrogen activity) on the fracture process.     

Surface-charge density and potential of coal-liquid mixtures and control of their stability and fluidity

The preparation conditions of concentrated (>70%) aqueous suspensions of coal were optimized, as were the surface charge density and the surface potential of the coal-water suspensions. The theoretical study showed that (1–3) or (2–3) electrolytes such as Na₂SO₄ or Na₅P₃O₁₀, greatly increase the surface charge density and the surface potential of the coal particles in water. This study has led to the interesting result that thinners and stabilizing agents of concentrated clay suspensions, such as lignosulphonates, tripolyphosphates, polynaphtalene sulphonates, etc., must also be good thinners and stabilizing agents for ground coal-water suspensions. Two parameters were controlled: the stability and the fluidity of the suspensions. A penetrometry technique revealed the importance of the resistance coefficient,C _r that can be used as a criterion for the evaluation of coal-water mixture stability and fluidity. Concentrated coal suspensions (about 75% of solid by weight) were prepared in water by using different additives, for instance sodium tripolyphosphate (NaTPP) and surfactants like lignosulphonates (by coupling of the dispersion and stabilizing effects) with the optimum concentration ratio of these two products equal to 1.9. The stability of the suspensions was then greater than 2 months and the viscosity was 1900 cP.     

SARS传染病数学建模及预测预防控制机理研究

首先，利用疾病传播的一般规律及人口守恒统计法则建立了四类人的SARS传染病数学模型，然后运用数学方法对四类人的SARS传染病数学模型进行分析，得出了其生理意义和预防、控制机理。其次，利用人工神经网络理论建立了SARS的预测模型，以北京市的SARS数据为例进行了预测和分析，预测结果显示该模型简单易行，预测精度高。     

检定和校准证书的异同与应用

本文介绍了检定和校准以及证书的两点相同、五点不同之处,说明了对检定证书和校准证书的正确应用。