Removal of lead in wastewater by immobilized inactivated cells of Rhizopus oligosporus

1　INTRODUCTIONThetreatmentofwastewatercontainingleadionscontinuestopresentchallengestoenvironmentalengi neers .InChina ,theeffluentstandardofleadinthedrainofindustryhasbeenspecifiedat1mg·L- 1forthechronictoxicitytohumansandenvironment[1] .Besidesbeingexpensive ,the presentmethodsfortreatingleadinwastewatermainlybasedonprecipita tiondonoteffectivelyremovelowleveloflead[2 ] .Us ingmicroorganismsasbiosorbentsforremovingleadions ,however ,offersapotentialalternativetotheex istingmethods .W…     

Biosorption mechanism of Cr （Ⅳ） onto cells of Synechococcus sp.

The biosorption mechanism of Cr （Ⅳ） ions on Synechococcus sp. biosorbent was studied by analyzing the biosorption kinetics as well as speciation change and bond formation during the biosorption process. The kinetics study shows that the adsorption process of Cr （Ⅳ） consists of a very fast stage in the first several minutes, in which more than half of the saturation adsorption is attained, and a slower stage that approximately follows the first order kinetic model, basically Freundlich isotherm models were observed. Comparative studies of FT-LR spectra of K2Cr2O7, free cells of Synechococcus sp., and Cr-bound cells of Synechococcus sp show that the speciation of chromium that binds to the cells ofSynechococcus sp. is Cr （Ⅲ）, instead of Cr （Ⅳ）, and the carboxylic, alcoholic, amido and amino groups may be involved in the binding of Cr （Ⅲ）. Integrative analyses of the surface electric potential, the effect of pH value on adsorption behavior of Cr （Ⅵ）, and the results of FT-IR show that the biosorption of Cr （Ⅵ） follows two subsequent steps, biosorption of Cr2O7 ^2- by electrostatical force at the protonated active sites and reduction of Cr2O7^2- to Cr^3＋ by the reductive groups on the surface of the biosorbents.     

松树锯末对Pb(II)与Ni(II)的吸附研究

以松树锯末为吸附剂,研究其对水中Pb(II)和Ni(II)的吸附性能,研究了锯末用量、搅拌速度、溶液初始pH值等对吸附效果的影响及其吸附动力学和热力学性能。研究结果表明,锯末对Pb(II)和Ni(II)具有良好的吸附能力。锯末对Pb(II)和Ni(II)吸附过程均符合拟二级吸附动力学模型(R²≥0.997 7),锯末吸附Pb(II)和Ni(II)的活化能分别为9.808 7 kJ/mol和2.859 4 kJ/mol;锯末对Pb(II)和Ni(II)等温吸附符合Langmuir模型(R²≥0.999 2)。热力学研究表明,锯末对Pb(II)和Ni(II)的吸附是自发的放热过程。     

Adsorption characteristics of thiobacillus ferrooxidans on surface of sulfide minerals

By using thiobacillus ferroxidans (T. f) from Qixiashan, Hubei Province, China, the adsorption characteristics of T. f on surface of sulfide mineral were studied. The influences of adsorption time, pH value, temperature, initial inoculated concentration of bacteria, concentration of sulfide mineral powder, and variety of minerals on the adsorption characteristics were firstly investigated by using the ninhydrin colorimetric method, and the changes of contact angles and Zeta potentials of mineral surface during the bacterial adsorption were then determined. The results show that when the leaching experiments are performed for a long time from several days to a month, the maximal quantity of adsorption of T f on the surface of pyrite is obtained under the following conditions: leaching for 20 d, pH value in range of 1–2 and temperature at 30 °C, respectively; when the bio-leaching experiments are performed for a shorter leaching time, the maximal quantity of adsorption is obtained under the conditions: bio-leaching for 2 h, at 2.4×10⁷ cell/mL of initial inoculated bacteria concentration, and at 10% of mineral powder concentration; and the adsorption quantities are different from one sulfide mineral to another, and the adsorption of T. f on the surface of sulfide minerals includes three phases: increasing phase, stationary phase and decreasing phase. Foundation item: Project(50321402) supported by the National Natural Science Foundation of China; project (2004CB619204) supported by the National Key Fundamental Research and Development Program of China     

Surface modification of magnesium hydroxide by γ-aminopropyltriethoxysilane

Magnesium hydroxide（MH）,which is commonly used as a halogen-free flame retardant filler in composite materials,was modified by silanization reaction with γ-aminopropyltriethoxysilane （γ-APS） in aqueous solution at different pH values （pH range from 8.0 to 12.0）. The surface properties of grafted γ-APS on MH surface as a function of solution pH value were studied using elemental analysis,Fourier transform infrared spectroscopy and zeta potential measurement. The results show that hydrolysis and condensation of γ-APS are activated in alkaline solution and lead to multilayer adsorption of γ-APS molecules on the surface of MH. The type of adsorption orientation of γ-APS on MH surface is a function of coverage density that is altered by changing solution pH value. At low coverage density （e.g. 55 nm^-2）,γ-APS molecules are preferentially adsorbed to the surface with the silicon moiety towards the surface,and increasing coverage density （e.g. 90 nm^-2） leads to parallel orientation. At an even higher coverage density （e.g. 115 nm^-2）,γ-APS molecules bond to the surface with the amino moiety towards the surface.     

Preparation of Chelating Polymer Grafted Magnetic Adsorbent and Its Application for Removal of Pb(Ⅱ) Ions

A novel magnetic chelating adsorbent (CPMS) with iminodiacetate functionality was prepared by polymerization of glycidyl methacrylate-iminodiacetic acid (GMA-IDA) monomer with N, N-methylenebisacrylamide as crosslinker in the presence of monodisperse magnetic silica microspheres (MS). CPMS was characterized by IR, SEM, VSM and TGA. The experimental results revealed that MS was embedded in the gel polymer, but the morphology of CPMS was irregular. The saturation magnetization for CPMS was found to be 28.4 emu/g, and the percentage of GMA-IDA polymer grafted on MS was about 46.5%. CPMS were shown to be efficient for the removal of Pb(II) ions at pH 3.0 - 6.0, and the adsorption data obeyed the Langmuir equation with a maximum adsorption capacity of 54.4 mg?g?1 at pH 5.0. Moreover, the adsorption rate of CPMS was fast and it took about 5 minutes to achieve adsorption equilibrium in aqueous solution of lower lead ions concentration.     

Synthesis and coloring properties of Cd（S1-xSex） pigments by precipitate-hydrothermal method

Cd（S1-xSex） pigments （red to yellow） were synthesized by precipitate-hydrothermal method. The structure, morphology and hue of the powder were characterized by X-ray diffractometry （XRD）, scanning electron microscopy （SEM）, energy dispersive X-ray spectroscopy （EDAX） and CIE chromaticity. The optimum synthesis conditions were obtained and reaction mechanism was further analyzed as well. The results show that molar ratio of S to Se, pH value and hydrothermal reaction conditions have great effects on the hues of the pigments. Pigments with vivid hues are obtained under the conditions that pH value is about 13.0, hydrothermal reaction condition is at 140 ℃ for 4 h or at 160 ℃ for 6 h. The reaction mechanism is that Se^2- of Cd（S1-xSex） substitutes S^2- of CdS and then forms a continuous solid solution.     

Sorption of Pb(II) from aqueous solution by konjac glucomannan beads

Konjac glucomannan beads have been investigated as metal biosorbent for Pb(II) from aqueous solu-tions. The effect of contact time, solution pH, initial metal concentration, and desorption were studied in batch experiments at 20℃±2℃. Maximum mental sorption was found to occur at initial pH 4.0―5.5. Kinetic studies revealed that the initial uptake was rapid and equilibrium was established in 3 h and that the data followed the prseudo-second order reaction. The equilibrium sorption data at initial pH 4.0 were described by the Langmuir and Freundlich isotherm models; however, Langmuir isotherm model has been found to provide the best correlation. The highest value of Langmuir maximum uptake (qmax) was found to be 105.71 mg·g-1. Similar Freundlich empirical constant (KF) was obtained to be 1.98 for lead. Adsorption-complexation may be involved in the sorption process of lead. Desorption experi- ments showed evidence that after two contacts neither HCl nor EDTA solutions were able to desorb lead from the konjac glucomannan beads, but the desorbtion efficacy of HCl solution was higher than EDTA solution. The results obtained show that konjac glucomannan beads may be used for the treat-ment of wastewater contaminated with lead.     

Adsorption of Pb^2＋ on macroporous weak acid adsorbent resin from aqueous solutions： Batch and column studies

The adsorption properties of a novel macroporous weak acid resin (D152) for Pb²⁺ were investigated with chemical methods. The optimal adsorption condition of D152 resin for Pb²⁺ is at pH 6.00 in HAc-NaAc medium. The statically saturated adsorption capacity is 527 mg/g at 298 K. Pb²⁺ adsorbed on D152 resin can be eluted with 0.05 mol/L HCl quantitatively. The adsorption rate constants determined under various temperatures are k _{288 K}=2.22×10⁻⁵ s^t-1, k _{298 K}=2.51×10⁻⁵ s⁻¹, and k _{308 K}= 2.95×10⁻⁵ s⁻¹, respectively. The apparent activation energy, E _a is 10.5 kJ/mol, and the adsorption parameters of thermodynamics are ΔH ^Θ=13.3 kJ/mol, ΔS ^Θ=119 J/(mol·K), and ΔG ^Θ 298 K =−22.2 kJ/mol, respectively. The adsorption behavior of D152 resin for Pb²⁺ follows Langmuir model. Foundation item: Project(2008F70059) supported by the Scientific and Technological Research Planning of Zhejiang Province, China     

Preparation of magnetic chitosan nanoparticles and immobilization of laccase

The magnetic chitosan nanoparticles were prepared by reversed-phase suspension method using Span-80 as an emulsifier, glutaraldehyde as cross-linking reagent. And the nanoparticles were characterized by TEM, FT-IR and hysteresis loop. The results show that the nanoparticles are spherical and almost superparamagnetic. The laccase was immobilized on nanoparticles by adsorption and subsequently by cross-linking with glutaraldehyde. The immobilization conditions and characterizations of the immobilized laccase were investigated. The optimal immobilization conditions were as follows: 10 mL of phosphate buffer (0.1 M, pH 7.0) containing 50 mg of magnetic chitosan nanoparticles, 1.0 mg · mL⁻1 of laccase and 1% (v/v) glutaraldehyde, immobilization temperature of 4°C and immobilization time of 4 h. The immobilized laccase exhibited an appreciable catalytic capability (480 units · g⁻¹ support) and had good storage stability and operation stability. The K _m of immobilized and free laccase for ABTS were 140.6 and 31.1 μM in phosphate buffer (0.1 M, pH 3.0) at 37 °C, respectively. The immobilized laccase is a good candidate for the research and development of biosensors based on laccase catalysis. Funded by Key Project of National Science Foundation of China (No. 60537050) and the National Science Foundation of China (No. 60377032)     

微生物胞外多糖SM-A87 EPS固定化条件优化及对Pb(II)吸附的研究

为了解决微生物胞外多糖(exopolysaccharide, EPS)Wangia profunda SM A87 (SM A87 EPS)的分离问题,选用环境友好材料聚乙烯醇(polyvinylalcohol, PVA)和海藻酸钠(sodium alginate,SA),通过正交试验设计对微生物胞外多糖SM A87 EPS固定化条件进行了优化,并对固定化SM A87 EPS小球的吸附效能进行了初步研究。以PVA、SA、EPS的质量分数及硬化时间为因素,以Pb(II)去除率为主要指标,成球性、多糖溶出率、耐酸性为辅助指标,获得了固定化EPS小球的最优配比为m(PVA)∶m(SA)∶m(EPS)∶m(H2O)=80∶20∶1∶1000,硬化时间为16h。通过批次实验,研究了固定化小球用量、pH值、吸附时间对固定化EPS小球吸附Pb(II)的影响。结果表明固定化小球对Pb(II)的去除率随吸附剂用量的增加而升高;pH值对固定化小球吸附Pb(II)有影响;浸泡组的吸附速率大于干燥组的吸附速率。Langmuir等温线能够较好地拟合固定化EPS小球吸附Pb(II)的热力学过程,相关回归系数为0.954,最大理论吸附量为82.64mg／g。准二级动力学模型能够较好地拟合固定化EPS小球吸附Pb(II)的动力学过程,吸附过程受两个以上的阶段控制。     

Synthesis of 1,4-benzenedicarbonyl thiourea resins and their adsorption properties for Ag（I）

Several 1,4-benzenedicarbonyl thiourea resins (BTR) were synthesized through interfacial polymerization between 1,4-benzenedicarbonyl diisothiocyanate and polyamine. Their structures were confirmed by FT-IR. The adsorption properties (including the effect of adsorption time, pH, initial concentrations and temperature) of BTR-1, BTR-2 and BTR-3 for Ag(I) were investigated by batch tests. The results show that the adsorption equilibria of BTR-1, BTR-2, BTR-3 for Ag(I) are achieved after about 10 h. Their equilibrium adsorption capacities are 7.11, 6.75 and 6.23, respectively, and the adsorption process accords with G. E. Boyd equation and Langmuir adsorption isotherm as well. The adsorption capacities increase with the increase of pH (the highest uptake values are observed at pH being about 6–7). The thermodynamic parameters of BTR-1 were calculated. The results show that ΔH ^Θ; and ΔS ^Θ are 6 958.8 J/mol and 64.28 J/(mol·K), respectively, and ΔG ^Θ at 20, 30, 40 and 50 °C are −11.79, −12.52, −13.16 and −13.8 kJ/mol, respectively. The silver-loaded resins can be quantitatively eluted by a solution containing 6% thiourea in 1 mol/L HNO₃.     

Adsorption of D113 resin for dysprosium(III)

The adsorption behavior and mechanism of D113 resin for Dy(III) was investigated by using the method of resin adsorption. Experimental results show that the optimum medium pH of adsorption of D113 resin for Dy³⁺ is pH=6.00 in the HAc-NaAc medium. The static adsorption capacity of D113 resin for Dy³⁺ is 292.7 mg·g⁻¹. The optimum eluant is 0.5 mol·L⁻¹ HCl. The adsorption rate constant is k ₂₉₈=6.8×10⁻⁶s⁻¹. The apparent activation energy of D113 resin for Dy(III) is 14.79 kJ·mol⁻¹. The adsorption behavior of D113 resin for Dy(III) obeys the Freundlich isotherm. The adsorption parameters of thermodynamic are ΔH=14.48 kJ·mol⁻¹, ΔS=54.69 J·mol⁻¹·K⁻¹, ΔG=−1.82 kJ·mol⁻¹.The adsorption mechanism of D113 resin for Dy³⁺ was confirmed by chemical analysis and IR spectra. Funded by the Natural Science Foundation of Zhejiang Province (No.201027), Foundation of Zhejiang Provincial Education Bureau (No.20040551) and Zhoushan Science Technology Bureau (No.04114)     

Microwave digestion polarography for determining seven trace elements in Salvia Miltiorrhiza Root and compound Salvia Miltiorrhiza Root injection simultaneously

The sensitive second derivative waves of Cu(Ⅱ),Pb(Ⅱ),Cd(Ⅱ),Ni(Ⅱ),Zn(Ⅱ),Fe(Ⅱ)and Mn(Ⅱ),forming in the substrate solution(pH=9.26)consisting of ammonia,ammonium chlorid,gelatin and ascorbic acid were researched.The peak potentials of the polarographic waves of the seven ions are at about 0.48,0.63,0.79,1.04,1.28,1.44 and 1.60 V respectively.Combining with microwave technique,a new method for the simultaneous determination of the seven trace elements in Chinese traditional medicine was developed.The method is easy to operate,rapid,simple and convenient.When the signal-to-noise rate equals 3,the detection limits of Cu,Pb,Cd,Ni,Zn,Fe and Mn are 4.2×10 3,5.3×10 3,2.1×10 3,5.8×10 4,3.0×10 3,7.7×10 4 and 1.1×10 3 μg/mL respectively.Well linear relationships exist between the concentrations and the peak currents when Cu,Pb,Cd,Ni,Zn,Fe and Mn concentrations are within 8.5×10 3 10,9.7×10 3 10,4.5×10 3 10,1.2×10 3 10,6.4×10 3 10,1.5×10 3 10 and 2.8×10 3 10 μg/mL,respectively.The method has been used to the simultaneous determination of the seven trace elements in Salvia Miltiorrhiza Root and compound Salvia Miltiorrhiza Root injection,the relative standard deviations(RSDs)of the Cu,Pb,Cd,Ni,Zn,Fe and Mn in the two medicines are 3.9% and 5.8%,4.0% and 4.1%,4.3% and 5.7%,4.9% and 5.3%,4.4% and 4.7%,3.5% and 4.0%,0.51% and 2.8%,respectively;the comparisons of the determination results with the values obtained by the standard method indicate that the presented method has very well veracity.     

Effects of different conditions on Pb2+ adsorption from soil by irrigation of sewage in South China

Pb²⁺ adsorption onto a soil by irrigation of sewage in the Pearl River Delta of South China was examined as a function of the reaction time, solution pH, initial lead concentration, organic matter (humic acid) and competitive ions (Cu²⁺). The adsorption of Pb²⁺ onto the soil was investigated on batch equilibrium adsorption experiments. Results show that the Pb²⁺ adsorption on the soil is relatively rapid in the first 30 min and reaches equilibrium at 2 h, and the kinetics of the adsorption process on the soil is well characterized by the pseudo-second order reaction rate. Langmuir, Freundlich and Temkin isothermal models are fit for the adsorption of Pb²⁺ onto the soil, and the maximum amount of Pb²⁺ adsorption (Q _m) is 7.47 mg/g. The amount of Pb²⁺ adsorption increases with increasing the pH at the range of 1.2–4.5 and reaches a plateau at the range of 4.5–12. The presence of humic acid in soil decreases the adsorption of Pb²⁺ onto the soil at solution pH of 8 since the negatively charged humic acid with Pb²⁺ is difficult to be adsorbed on the negatively charged soil surface. The adsorption of Pb²⁺ onto the soil also decreases in the presence of Cu²⁺ due to the competition adsorption between Pb²⁺ and Cu²⁺.     

Removal of Pb^2＋ and Cd^2＋ by adsorption on clay-solidified grouting curtain for waste landfills

Pb^2＋ and Cd^2＋ in leachate were adsorbed on clay-solidified grouting curtain for waste landfills with equilibrium experiment. The cation exchange capacity was determined with ammonium acetate. And the concentration of heavy metal cations in leachate was determined with atomic absorption spectrophotometer. Their equilibrium isotherms were measured, and the experimental isotherm data were analyzed by using Freundlich and Langmuir models. The results show that the adsorption capacities of the heavy metal cations are closely related to the compositions of clay-solidified grouting curtain, and the maximum adsorption appears at the ratio of cement to clay of 2 ： 4 in the experimental conditions. At their maximum adsorption and pH 5.0, the adsorption capacities of Pb^2＋ and Cd^2＋ are 16.19 mg/g and 1.21 mg/g. The competitive adsorption coefficients indicate that the adsorption of clay-solidified grouting curtain for Pb^2＋ is stronger than that for Cd^2＋. The adsorption process conforms to Freundlich＇s model with related coefficient higher than 0. 996.     

Effect of Lead Contents on the Properties of PMSZT Piezoelectric Ceramics

The effects of Pb content on crystallographic phase, microstructure, electric-properties of PMSZT piezoelectric ceramics were studied. The crystallographic phase and microstructure of the ceramics were examined by using X-ray diffraction （XRD） and scanning electron microscopy （SEM）. The experimental result shows that the samples consist of a mixture of tetragonal and rhombohedral phases in the range of lead contents x=0.95-1.06, grains grow up homogeneously and the minimum value of Curie temperature was obtained with x-=1.02. With Pb content x〈l.02 or x〉1.02, the Curie temperature moves towards a high temperature. A well-situated electric-properties of ET33/E0 （1660）, d33 （344pC/N）, Kp （0.684）, Qm （2350）,tan 3（0.0030） were obtained when lead content x=1.02.     

HYDROPHOBICITY－HYDROPHILICITY BALANCE RELATIONSHIPSFORCOLLECTORLESSFLOTATIONOFSULPHIDEMINERALS

ＨＹＤＲＯＰＨＯＢＩＣＩＴＹ－ＨＹＤＲＯＰＨＩＬＩＣＩＴＹＢＡＬＡＮＣＥＲＥＬＡＴＩＯＮＳＨＩＰＳＦＯＲＣＯＬＬＥＣＴＯＲＬＥＳＳＦＬＯＴＡＴＩＯＮＯＦＳＵＬＰＨＩＤＥＭＩＮＥＲＡＬＳＨＹＤＲＯＰＨＯＢＩＣＩＴＹ－ＨＹＤＲＯＰＨＩＬＩＣＩＴＹＢＡＬＡ...     

Adsorption of Macroporous Phosphonic Acid Resin for Nickel

1Introduction Thesynthesischaracterizationandadsorptionproper tyofpolymericmaterialshavebeenresearchedinrecent years[110].Macroporousphosphonicacidresin[11](PAR)isanovelpolymericmaterialwhichcontainsafunctional groupof[PO(OH)2].Ithasalotofadvantagessuchas…