物化视图选择中权限因子的设计

物化视图是数据仓库中提高查询效率的有效手段,物化视图的选择一直是数据仓库领域的研究热点.通过研究和实验,提出在物化视图选择中加入权限因子,将各候选视图的权限值纳入算法评价函数的计算中,使最终得到的物化视图集既能面向企业基层提供OLAP查询,又能保证企业决策层OLAP查询的速度.     

NDSMMV——一种多维数据集物化视图动态选择新策略

物化视图的选择策略是数据仓库研究的重要问题之一.通过深入研究提出了一种多维数据集中物化视图动态选择的新策略--NDSMMV,包括候选视图生成算法CVGA、物化视图选择算法IGA、物化视图调整算法MAMV和物化视图动态调整算法DMAMV.CVGA基于多维数据格生成候选视图集,对候选视图数量进行压缩以减少后续算法的视图空间搜索代价和时间复杂度;IGA基于视图查询、视图维护和存储空间三元评价标准在候选视图集上进行物化视图的选择;MAMV基于物化视图选择过程已选视图的收益变化情况对物化视图进行进一步调整以提高查询的响应性能;DMAMV定时地判断查询视图类型分布是否变化来决定是否进行物化视图的动态调整,从而避免了物化视图集的"抖动".理论分析和实验结果表明该策略是有效可行的.     

基于遗传算法的受限物化视图

受限物化视图的选择是当前数据仓库研究的最重要的问题之一,且其是个NP问题。本文通过对视图与查询关系的研究,提出了一种选择物化视图的两阶段算法框架,首先利用候选视图选择算法缩小视图选择的范围,而后利用遗传算法解决受限物化视图的选择问题。     

超市数据仓库中物化视图的选择与调整策略

物化视图选择是数据仓库研究领域的一个重要课题,其选择策略直接影响到数据仓库的查询效率.通过对超市数据仓库的设计及已有研究成果的分析,对物化视图的选择算法做了一些改进,并给出了一种据查询情况的变化动态调整物化视图集的算法.     

基于多维护策略的物化视图选择方法

物化视图是数据仓库环境中提高OLAP查询效率的重要手段，因此，物化视图的选择是数据仓库设计中重要的决策之一。本文提出的物化视图选择方法目标是选择合适的视图进行物化，使得查询处理的总代价和物化视图的维护代价最低，提出了物化视图收益模型，并在此基础上基于视图的多维护策略提出了物化视图选择的方法：基于增量和重计算的物化视图选择算法IRMVS、基于增量策略的物化视图选择算法IMVS和基于重计算策略的物化视图选择算法RMVs和基于增量策略的物化后代视图选择算法IMDVS，理论分析和实验表明这些算法是有效可行的。     

面向查询集覆盖的物化视图选择算法

为了解决大容量物理存储条件下数据仓库的物化视图选择问题,提出一种面向查询集覆盖的物化视图选择算法.首先给出了一些概念和定义,然后从视图集的多维数据格中抽取和裁剪出候选视图集,并定义视图物化的效益模型,最后在存储容量的限制下逐步淘汰收益最小的应答查询的冗余视图,得到覆盖所有查询的最优物化视图集.实验结果表明,该算法在较大物理存储条件下的物化视图选择效率优于以往算法,且能够消除物化视图在应答查询时存在的时延“抖动”现象,应答用户查询的平均时间也大为缩短.     

数据仓库性能优化之索引和物化视图耦合方法

为了进一步提高数据仓库的性能, 通过分析数据仓库中性能优化技术的特点, 提出了索引和物化视图耦合的性能优化技术。通过数据挖掘自动选择候选索引和物化视图, 减少查询的扫描范围; 然后研究在物化视图上建立索引的空间高效存储方法, 以提高查询速率; 最后利用成本模型对耦合情况进行分析, 验证了耦合方法可以极大提高单一索引查询或者物化视图的性能。     

数据仓库中物化视图选择策略

为了提高决策支持和OLAP查询的响应效率,数据仓库多采用物化视图的思想.因此,物化视图的选择策略是数据仓库研究的重要问题之一.其目标是选出一组存储、维护代价与查询代价的总和为最小的物化视图.提出一个以MVPP(multi-view processing plan)为视图选择的搜索空间的物化视图选择新算法--VSMF(views selection base on multi-factor)算法.该算法在存储空间约束下同时实现多查询最优化和视图维护最优化.     

数据仓库物化视图选择的混合算法

物化视图是提高数据仓库的查询响应能力以高效支持决策分析的重要手段，但物化视图集选选择是一个复杂问题。结合启发式算法的快速收敛能力和遗传算法的全局优化能力的两层物化视图求解方案提供了物化视图选择问题求解的可行途径。     

数据仓库中物化视图的选取策略

数据仓库中用存储大量的物化视图来加速OLAP的查询响应，物化视图的选取是数据仓库设计中的一个重要问题。论文提出了一个有效的物化视图选取算法，采用基于数据立方体层次搜索的方式选取视图。经分析与测试表明，该算法取得良好的效果和效率。     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

煤矿井下安全监控分站的设计及其仿真实现

为了设计一种具有低成本、低功耗、易操作、功能强且可靠性高的煤矿井下安全分站,针对煤矿安全生产实际,文章提出了采用MCS-51系列单片机为核心、具有CAN总线通信接口的煤矿井下安全监控分站的设计方案;首先给出煤矿井下安全监控分站的整体构架设计,然后着重阐述模拟量输入信号处理系统的设计过程,最后说明单片机最小系统及其键盘、显示、报警、通信等各个组成部分的设计;为验证设计方案的可行性与有效性,使用Proteus软件对设计内容进行仿真验证,设计的煤矿井下安全监控分站具有瓦斯、温度等模拟量参数超标报警功能和电机开停、风门开闭等开关量指示功能;仿真结果表明:设计的煤矿井下安全监控分站具有一定的实际应用价值.     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

基于QTE的蒙古文显示机制研究与实现

蒙古语言是中国蒙古族使用的通用语言,由于蒙古文区别于其他文字的书写方式和其自身变形机制等特点,在很多通用的文字处理引擎中都不被支持。在嵌入式产品开发与应用领域中Linux加QTE已经成为流行方式。该文给出了一种在QTE环境上实现基于标准Unicode的蒙古文点阵显示和变形算法, 并自定义了支持蒙古文的QTE组件,扩展了QTE功能,为在Linux加QTE方式的嵌入式体系结构中处理蒙古文提供了一种解决方法。     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

基于AD9626的模拟信号采集存储卡设计

自然界的绝大部分信号都是以模拟的形式存在,因此模拟信号的采集转换存储在数字时代十分关键。文章讨论了在雷达信号处理领域基于AD9626的AD采集存储卡的设计原理、硬件结构和程序设计与芯片配置等问题,为今后相关领域的研究提供了可参考的方案。     

The development of robot art

Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

A human-computer interface for non-computer specialists

The COM teleconferencing system was designed to be easy to use for both beginners and people with much computer experience. A number of design choices in organizing the human-computer interface were considered very carefully. These design problems are not unique for teleconferencing applications, but will appear in many other developments of human-computer interfaces for non-computer specialists. This report discusses naming conventions, menu format, user commands, help facility and the treatment of ‘type ahead’ from the users.