Accumulation in and effects of lead and cadmium on waterfowl and passerines in northern Idaho

Waterfowl and passerines in northern Idaho in 1987 had high levels of lead in their blood and tissues that originated primarily from mining and smelting activities. Four Canada geese (Branta canadensis) and one common goldeneye (Bucephala clangula) found dead contained 8 to 38 microg/g (wet mass) of lead in their livers. These levels exceed the lower lethal limit of 5 microg/g in experimental birds. Two of the Canada geese (one each from the contaminated and reference areas) died with ingested lead shotgun pellets (shot) in their gizzards, whereas the other three birds from the contaminated area contained no ingested shot and evidently died from ingesting environmental lead in sediment or biota. Lead burdens in most American robins (Turdus migratorius) and mallards (Anas platyrhynchos) were high, whereas those in tree swallows (Tachycineta bicolor) were slightly elevated. Lead accumulated to potentially hazardous levels in blood and tissues of some nestling robins (maxima of 0.87 microg/g in blood and 5.6 microg/g in liver) and mallards (maxima of 10.2 microg/g in blood and 2.8 microg/g in liver). In mallards, lead levels and associated physiological characteristics of blood were significantly different in juveniles (HY) versus adults (AHY). Activity of delta-aminolevulinic acid dehydratase (ALAD) was about 87 to 95% lower than values for control birds in experimental studies. Activity of ALAD was significantly inversely correlated with blood lead levels. Cadmium was detected in kidneys of most birds, but even the maximum concentration of 7.5 microg/g in an AHY mallard was below known harmful levels.     

Occurrence and treatment of arsenic in groundwater and soil in northern Mexico and southwestern USA

This review focuses on the occurrence and treatment of arsenic (As) in the arid region of northern Mexico (states of Chihuahua and Coahuila) and bordering states of the southwestern US (New Mexico, Arizona, and Texas), an area known for having high As concentrations. Information assembled and assessed includes the content and probable source of As in water, soil, and sediments and treatment methods that have been applied in the area. High As concentrations were found mainly in groundwater, their source being mostly from natural origin related to volcanic processes with significant anthropogenic contributions near mining and smelting of ores containing arsenic. The affinity of As for solid phases in alkaline conditions common to arid areas precludes it from being present in surface waters, accumulating instead in sediments and shifting its threat to its potential remobilization in reservoir sediments and irrigation waterways. Factors such as oxidation and pH that affect the mobility of As in the subsurface environment are mentioned. Independent of socio-demographic variables, nutritional status, and levels of blood lead, cognitive development in children is being affected when exposed to As. Treatments known to effectively reduce As content to safe drinking water levels as well as those that are capable of reducing As content in soils are discussed. Besides conventional methods, emergent technologies, such as phytoremediation, offer a viable solution to As contamination in drinking water.     

Photodegradation of polychlorinated dibenzo-p-dioxins and dibenzofurans in aqueous solutions and in organic solvents

Aqueous solutions of selected polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) were prepared using a generator column and exposed to UV (300 nm) light in the laboratory and to sunlight in an outdoor environment. In the laboratory, additional exposures were also carried out using 60% acetonitrile/water solutions. At 300 nm di- and tetra PCDDs had higher first-order photodegradation rate constants in 60% acetonitrile/water than in pure water. The solvent effect was reversed for PCDFs. These results may be a reflection of the higher polarity of PCDFs compared to PCDDs. In both the indoor and outdoor exposures photodegradation rates decreased with increasing concentrations of chlorination. However, OCDF exposed to 300 nm light in 60% acetonitrile/water and to sunlight in pure water photodegraded more rapidly than tetra CDF. Photolysis rates in sunlight were considerably slower (t(1/2) of 6.4-23 h) than photolysis rates at 300 nm in the laboratory (t(1/2) of 4.3-680 min), reflecting the lower intensity of sunlight in the 300 nm region of the UV/Vis spectrum. The extent of dechlorination of the PCDDs/PCDFs was less than 20% and reductive dechlorination does not appear to be a major process in the photodegradation of PCDDs/PCDFs in aqueous solutions.     

Sorption and degradation of imidacloprid in soil and water

Imidacloprid, the major component of many widely used insecticide formulations, is highly persistent in soils. In this study, the sorption of imidacloprid by six soils as well as its photodegradation and hydrolysis in water were studied. The soils differed significantly in organic matter content and other physical and chemical properties. Sorption increased with increasing soil organic matter content but was not significantly correlated with other soil properties. Removal of organic matter via H2O2 oxidation decreased the sorption. By normalizing the Freundlich coefficients (Kf) to organic matter contents, the variability in obtained sorption coefficient (Kom) was substantially reduced. These results indicate that soil organic matter was the primary sorptive medium for imidacloprid. The low heat of sorption calculated from Kom suggests that partition into soil organic matter was most likely the mechanism. The photodegradation and hydrolysis of imidacloprid in water followed pseudo-first-order kinetics; however, the latter process needed a six-time-higher activation energy. While both processes produced the same main intermediate, they occurred via different pathways. The hydrolysis of imidacloprid was not catalyzed by the high interlayer pH in the presence of metal-saturated clays, which appeared to result from the lack of the pesticide adsorption in the interlayers of clays.     

Concentrations of chromium,manganese, and lead in air and in avian eggs

The expansion of urbanization introduces air pollution to wildlife areas. Some metal contaminants occurring in concentrations too small to have any measurable impact on adult birds may seriously affect embryos that are more sensitive to contaminants than the adult. Chromium, manganese, and lead are toxic and can be passed from the hen to the egg. This study relates the concentrations of these metals in eggs to their concentrations in air in three cities. Rock dove eggs were sampled and air pollution records were examined in the California cities of Riverside, Los Angeles, and San Francisco. The eggs from San Francisco did not differ from those of Los Angeles in lead concentration but the air did differ. The eggs collected in Los Angeles in 1998 had concentrations of chromium greater than in those from Riverside and from Los Angeles 1999 but the air had concentrations of chromium that did not differ among those three collections. Concentrations of manganese did not differ among the eggs but did differ among the air samples of the three cities. Exposures of embryos to chromium and manganese in this study were not at levels warranting concern. Although the concentration at which lead in eggs impairs avian health is not established, the highest concentrations found in this study exceed estimated safe concentrations. There is no indication that embryo exposure is directly related to atmospheric levels of these metals in the cities of this study.     

Levels and trends of PCDD/Fs and PCBs in human milk in Finland

Word Health Organization, WHO/EURO, has coordinated two rounds of follow-up studies on levels of PCDDs, PCDFs, and PCBs in human milk which were analyzed as two pooled samples from each participating country, one from urban and the other one from rural area. Finland has taken part to both of those studies and we are now reporting results of all the second round randomly sampled human milk samples (84 samples) from Southern (20) and Eastern (64) Finland. The levels of PCDD/Fs and PCBs in human milk in Southern Finland were considerably higher than in Eastern Finland. The level of PCDD/Fs in human milk in Southern Finland was the same as in the Central Europe but the level in Eastern Finland was similar to levels in Norway and eastern parts of Europe. The concentrations of PCDD/Fs and PCBs showed a significant decrease from 1987 to 1994. Declining of PCDD/Fs and PCBs was 36 and 49% in primiparae mothers' milk, respectively. This decrease in concentrations of PCDD/F and PCB was slightly greater in Eastern than in Southern Finland.     

Past and future trends in concentrations of sulphur and nitrogen compounds in the Arctic

Recent trends in nitrogen and sulphur compounds in air and precipitation from a range of Arctic monitoring stations are presented, with seasonal data from the late 70s to 2004 or 2005. Earlier findings of declining sulphur concentrations are confirmed for most stations, while the pattern is less clear for reduced and oxidized nitrogen. In fact there are positive trends for nitrogen compounds in air at several stations. Acidity is generally reduced at many stations while the precipitation amount is either increasing or stable. Variability of sulphate concentrations in air for the period 1991–2000 is reasonably well reproduced at most stations using an Eulerian, hemispherical model. Results for nitrogen compounds are weaker. Scenario studies show that even if large sulphur emission reductions take place in important source regions in South-East Asia in the coming decades, only small changes in Arctic deposition can be expected. This is because South-East Asian emissions have small influence north of the Arctic circle.     

Sulphite and sulphate concentrations in weathering products of sandy limestone and in deposition samples

The sulphite and sulphate concentrations in weathering products of limestone and in wet and total deposition samples were measured by the modified West-Gaeke method and by ion chromatography. The sulphite content in the weathering crust and in the runoff rainwater of two historical buildings in Belgium, was always much lower than the sulphate content. The maximum sulphite to sulphate ratio was 2.5%. The sulphite concentration in wet and total deposition samples was in the low or sub ppm range except during two misty periods when the sulphite concentration was 6.8 and 21 mg litre(-1). In those samples a high sulphate concentration was also found (nl. 57 and 137 mg litre(-1), respectively).     

The role of sorption and bacteria in mercury partitioning and bioavailability in artificial sediments

This study compared the relative importance of three types of sorption (organic matter-particle, mercury-organic matter and mercury-particle) in controlling the overall mercury partitioning and bioavailability in sediments. We found that all three types of sorption were important for both inorganic mercury (Hg) and methylated mercury (MeHg). Mercury-particle sorption was more important than mercury-fulvic acid (FA) sorption in increasing the mercury concentrations with increasing aging. Bioavailability (quantified by gut juice extraction from sipunculans) was mainly controlled by mercury-particle sorption, while FA-particle and mercury-FA sorption were not as important, especially for MeHg. Bacterial activity also increased the partitioning of Hg or MeHg in the sediments and was further facilitated by the presence of organic matter. The bioavailability of Hg or MeHg from sediments was only slightly influenced by bacterial activity. This study highlights the importance of sorption from various sources (especially mercury-particle sorption) as well as bacteria in controlling the partitioning and bioavailability of Hg or MeHg in sediments.     

Anthropogenic and natural levels of arsenic in PM10 in Central and Northern Chile

A few copper and gold smelters in Chile are behind a large fraction of global arsenic emissions, raising concerns for increased concentrations of arsenic in PM10 in Central and Northern Chile. This concern is amplified by the fact that Northern Chile soils and rivers in general are characterized by a high arsenic content. A monitoring and modeling study has been performed to quantify the regional impact of the smelter emissions. Measured atmospheric arsenic concentrations from 2.4 to 30.7 ng m⁻³ were found at seven rural stations, located tens to hundreds of kilometers away from the nearest smelter. Analyses of topsoil and subsoil samples taken from PM10 monitoring stations revealed levels up to 291 mg kg⁻¹, the highest values found in the northern Atacama desert in Chile. An absolute principal component analysis of selected trace elements in PM10 shows that the regional impact of anthropogenic smelter emissions on airborne arsenic concentrations is more important than the effect of soil dust resuspension. The dominance of the smelter emissions is larger in Central Chile than in the northern parts. The impact of resuspended soil dust on airborne arsenic levels in rural areas was estimated not to exceed 5 ng m⁻³. The model calculations support the dominant role of anthropogenic emissions and give spatial and temporal variations in atmospheric concentrations consistent with the monitored levels at five of the seven stations. At two of the northernmost stations indications were found of unidentified sources other than the smelters and the resuspended soil dust, contributing to about 5 ng m⁻³ of total arsenic levels. The study confirms that a strong control or elimination of arsenic emissions from the smelters would lead to arsenic in PM10 levels in Northern and Central Chile comparable to non-polluted areas in other countries.     

Occurrence and profiles of organic sun-blocking agents in surface waters and sediments in Japanese rivers and lakes

Sun-blocking agents including eight UV filters (UVF) and 10 UV light stabilizers (UVLS) were measured in water and sediment collected from 22 rivers, four sewage treatment plant effluents (STPE) and three lakes in Japan. Total sun blocking agents levels ranged from N.D. to 4928 ng/L and from 2.0 to 3422 μg/kg dry wt in surface water and in sediment, respectively. Benzyl salicylate, benzophenone-3, 2-ethyl hexyl-4-methoxycinnamte (EHMC) and octyl salicylate were dominant in surface water receiving wastewater effluents and STPE, although UV-328, benzophenone and EHMC were dominant in other surface water except background sites. Three UVF and nine UVLS were observed from all sediment and their compositions showed similar patterns with UV-328 and UV-234 as the most prevalent compounds. Homosalate, octocrylene, UV-326, UV-327, UV-328 and UV-234 were significantly correlated with Galaxolide^® in sediments. Concentrations of UV-327 and UV-328 also had strong correlation between those of UV-326 in sediment.     

Evaluation of photolysis and hydrolysis of pyraclostrobin in aqueous solutions and its degradation products in paddy water

This study evaluated the hydrolysis and photolysis kinetics of pyraclostrobin in an aqueous solution using ultra-high-performance liquid chromatography–photodiode array detection and identified the resulting metabolites of pyraclostrobin by hydrolysis and photolysis in paddy water using high-resolution mass spectrometry coupled with liquid chromatography. The effect of solution pH, metal ions and surfactants on the hydrolysis of pyraclostrobin was explored. The hydrolysis half-lives of pyraclostrobin were 23.1–115.5?days and were stable in buffer solution at pH 5.0. The degradation rate of pyraclostrobin in an aqueous solution under sunlight was slower than that under UV photolysis reaction. The half-lives of pyraclostrobin in a buffer solution at pH 5.0, 7.0, 9.0 and in paddy water were less than 12?h under the two light irradiation types. The metabolites of the two processes were identified and compared to further understand the mechanisms underlying hydrolysis and photolysis of pyraclostrobin in natural water. The extracted ions obtained from paddy water were automatically annotated by Compound Discoverer software with manual confirmation of their fragments. Two metabolites were detected and identified in the pyraclostrobin hydrolysis, whereas three metabolites were detected and identified in the photolysis in paddy water.     

Determination of herbicides in stemflow and throughfall of beeches (Fagus sylvatica L.) and in rainfall

The pesticide contamination of water samples collected in and nearby a beech forest in northern Germany was evaluated. For this purpose, a method for the collection of water samples from stemflow and throughfall of beeches (Fagus sylvatica L.) and rainfall was developed in response to the demands for the analysis of organic contaminants in water samples. Furthermore a sensitive and selective multiresidue method was developed to determine 18 pesticides, frequently used in Germany, in aqueous samples. The samples collected were taken from the stemflow, the crown throughfall and the rainfall between May and November 2001. Analysis based on reversed-phase liquid chromatography with a pneumatically assisted electrospray mass spectrometer followed a solid phase extraction using C-18 extraction cartridges. Isoproturon, metolachlor, prosulfocarb and terbuthylazine were found during and shortly after their application period. In rainfall metolachlor, terbuthylazine and prosulfocarb were detectable in concentrations between 5 and 65 ng l(-1) and isoproturon in concentrations between 20 and 360 ng l(-1) respectively. In most of the samples, concentrations of those four pesticides were higher and detectable for a longer time in stemflow than in rainfall. Crown throughfall samples were collected from the end of August to November. Absolute deposition of isoproturon to forest soil were up to 70 times higher in comparison to rainwater samples.     

Evaluating the effect of age and area of residence in the metal and metalloid contents in human hair and urban topsoils

Monitoring the levels of trace elements in hair can allow estimating the effects of the geographical location and also can provide a notion of the metal body burden. However, the use of human hair is controversial due to the different confounding factors that could affect the presence of trace elements in hair. As a result, a comprehensive monitoring study was performed in Alcalá de Henares, one of the major cities in the Madrid region, Spain. Trace elements have been monitored in urban topsoils and in human hair of two well-defined and healthy groups of population: children (6–9 years) and adolescents (13–16 years). The city was divided into four areas or zones with different characteristics to assess the possible effect of area of residence and age in the presence of Al, As, Be, Cd, Cr, Cu, Hg, Mn, Pb, Sn, Ti, Tl and Zn in soils and hair. There is no current hypothesis that explains the possible effect of the area of monitoring in the distribution of Be, Cr, Ni, Sn and Ti found in these urban soils, maybe because urban soils receive high disturbance, and there are many factors involved. The presence of most of the trace elements monitored was significantly higher in the hair of the children population, except for Sn and Zn. This could be attributed mainly to dietary habits. Other factors influencing metal content in hair such as environmental factors would have had a minimal effect in the population groups here studied. Finally, none of the levels of trace elements studied in hair were significantly correlated with levels measured in the topsoils of public parks in Alcalá de Henares, with the exception of Pb in adolescent participants.     

Butyltin residues in livers of humans and wild terrestrial mammals and in plastic products

Butyltin compounds (BTs) including mono-(MBT), di-(DBT) and tributyltin (TBT) were determined in livers of humans and wild terrestrial mammals, such as raccoon dogs (Nyctereutes procyonoids) and monkeys (Macaca fuscata) from Japan. In addition, 22 samples of plastic products were analyzed. BT residues were detected in all the liver samples of humans and raccoon dogs, with concentrations of <360 ng/g wet wt, whereas concentrations in the liver of monkeys were either less than the detection limit or were only in trace levels. Elevated concentrations of BTs, particularly DBT (<140,000 ng/g) and MBT (<130,000 ng/g), were found in some plastic products, such as baking parchments made from siliconized paper and gloves made up from polyurethane. The results of a cooking test using the above baking parchment indicated the transfer of BTs to foodstuffs. These observations suggest expansion of BT contamination among terrestrial mammals. BT pollution from industrial appliances, such as plastic stabilizers and catalysts other than those of marine origin as antifouling agents, are suggested as alternative sources of exposure.     

Levels of dioxins, furans and PCBs in human serum and milk of people living in Greece

In an attempt to evaluate the background levels of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), non-ortho, mono-ortho and indicator polychlorinated biphenyls (PCBs) in people living in an urban (Athens) and a rural (Kozani) area of Greece, blood serum and mother milk samples were analyzed. Analytical results are reported in this study. Statistically significantly differences were observed between regions, sexes and ages. Contamination levels in blood and human milk from Greece reported here are low compared to the previously reported dioxin data from other European countries and give no indication of particular health risk.     

Characterisation and fingerprinting of PCBs in flue gas and ash from waste incineration and in technical mixtures

Congener patterns of mono- to deca-chlorinated biphenyls (PC1-10B) were evaluated in (a) waste incineration flue gases collected in the post-combustion zone of a laboratory-scale fluidized-bed reactor, (b) ashes from two different MSW incineration plants, and (c) published data of eight Aroclor formulations. The congener patterns of the flue gases, ashes, and Aroclor mixtures clearly differed from each other, likely reflecting differences in formation pathways. The flue gas congener patterns were largely dominated by the least chlorinated congeners, whereas the ashes displayed more evenly distributed patterns. The most abundant congeners indicated a preference for 3,3',4,4'-oriented substitution, which may be related to de novo-type formation involving perylene. Principal component analysis confirmed that congener patterns differed among the three matrices and also distinguished flue gases collected at 200 °C from those collected at 300 °C and 450 °C. This distinction could be partly explained by the degree of chlorination, although the substitution status of the ortho-position, and substitution in the 3,3',4,4'-positions also seemed to be influential. Injecting biphenyl into the post-combustion zone of the reactor did not alter the patterns, indicating that availability of the backbone structure is not a limiting factor for PCB formation.     

Analysis and evaluation of chlorinated persistent organic compounds and PAHs in sludge in Korea

The concentrations of 12 POPs listed in the Stockholm convention, chlorophenols (CPs) and PAHs were investigated in sludge samples from wastewater and sewage treatment plants (WWTPs and STPs). The concentrations of PCDD/Fs in the wastewater sludge ranged from 0.189 to 1092 ng-TEQkg(-1) dry wt., and most of the sludge samples had levels below the EU guideline for the land application of PCDD/Fs (<100 ng-TEQkg(-1) dry wt.) except one sample. Co-PCB congeners were analyzed from four WWTPs, with total concentrations ranging from 0.265 to 26.6 ng-TEQkg(-1) dry wt., which were similar to the results obtained from previous studies. The levels of PCDD/Fs and Co-PCBs varied according to the main source of the influent to each WWTP and the paper industry was the main source of these compounds in the sludge due to the chlorine bleaching process. In case of OCPs, HCB and p,p'-DDE were detected at relatively high levels in the sludge samples compared to other target compounds, ranging from 1.30 to 21.5 microg kg(-1) dry wt. and 0.758 to 14.8 microg kg(-1) dry wt., respectively. Different OCP distribution patterns were observed according to sludge types, with HCB and DDTs being dominant in the sludge from WWTPs and STPs, respectively. The total levels of PAHs and CPs ranged from 1.24 to 44.9 mg kg(-1) dry wt. and 0.340 to 3.85 mg kg(-1) dry wt., respectively. The PAHs and CPs were also shown to have various distribution patterns, possibly due to the different wastewater sources to the WWTPs.     

Formation and release of residues of the 14C-labelled herbicide isoproturon and its metabolites bound in model polymers and in soil

The humic monomer catechol was reacted with (14)C-isoproturon and some of its metabolites, including (14)C-4-isopropylaniline, in aqueous solution under a stream of oxygen. Only in the case of (14)C-4-isopropylaniline, incorporation in oligomers, in fulvic acid-like polymers, and in humic acid-like polymers by covalent bonds was observed. The main oligomer was identified by mass spectrometry as a trimer, 4,5-bis-(4-isopropylphenylamino)-3,5-cyclohexadiene-1,2-dione. Biomineralization of (14)C-compounds to (14)CO(2) in a loamy soil and release of (14)C from soil columns into percolate water decreased in the order: free isoproturon >free 4-isopropylaniline>fulvic acid-like polymers>trimer>humic acid-like polymers. In soil columns, a small but measurable migration of (14)C from polymers from upper to deeper soil layers could be detected; most of this (14)C was bound again in a non-extractable form. It is concluded that aniline-derived pesticides bound in soil by covalent binding may not be fully undegradable, nor fully immobile.     

Dissipation of fenoxycarb and pyriproxyfen in fresh and canned peach

The objective of this work was to determine the dissipation of fenoxycarb and pyriproxyfen in fresh and canned peaches in order to know the levels of residues that can reach consumers in real circumstances. Two field dissipation studies were carried out, one of them at the pre-harvest interval (PHI) with good agricultural practice (GAP) and the other one in a situation of critical agricultural practice (CAP). Two canning dissipation studies were carried out for samples from both agricultural situations in an industrial pilot plant and the dissipation was determined in each relevant step. An analytical methodology was used including acetone-dichloromethane extraction, purification and analysis by liquid chromatography and diode array detection (LC-DAD) with a limit of quantification (LOQ) of 0.05 mg/kg. It was validated under SANCO/10232/2006 Guidelines. These pesticides complied with the official maximum residue limits (MRLs) in peaches at the PHI with good agricultural practices. In hypothetical situation of a second application at the PHI, fenoxycarb and pyriproxyfen residues were above the MRLs in peaches. The canning study reduced the residues to no detectable levels in the cans for consumers.