聚4-乙烯吡啶类高分子铑(I)化合物对甲醇羰化合成乙酸的催化性能

本文将聚4-乙烯吡啶(PVPy)、聚1-甲基-4-乙烯吡啶季铵碘(PVPyMe^+I^-)和4-乙烯吡啶/1-甲基-4-乙烯吡啶季铵碘共聚物[P(VPy-VPyMe^+I^-)]分别与四羰基二氯二铑反应制备成高分子铑(I)催化剂, 并考察了它们各自在甲醇羰化反应中的催化行为。结合IR光谱对这些催化剂结构的分析研究表明, 以上4-乙烯吡啶类高分子链上所含的功能基各自与铑(I)配合物离子之间以不同的链联方式所产生的不同结构的活性物种对催化反应性能有着显著的影响, 具有双配位的螯合型稳定结构的Rh(I)/PVPy催化剂, 表现出较差的催化反应活性, 而离子键合型的Rh(I)/PVPyMe^+I^-和杂键合型的Rh(I)/P(VPy-VPyMe^+I^-)催化剂均表现较佳的反应性能, 特别是Rh(I)/P(VPy-VPyMe^+I^-),由于其形成具有更强亲核性的五配位中间过渡态参与反应过程, 从而在较大程度上提高了催化反应速率。     

旋光聚[乙烯-alt-R-N-(1-苯乙基)马来酰胺酸]的合成及静电自组装

以聚(乙烯-alt-马来酸酐)为原料,通过与R-(+)-α-苯乙胺的酰胺化反应,合成了一种新型的旋光聚电解质聚[乙烯-alt-R-N-(1-苯乙基)马来酰胺酸],利用红外吸收光谱、紫外吸收光谱、核磁共振氢谱和旋光度数据对其结构进行表征.聚[乙烯-alt-R-N-(1-苯乙基)马来酰胺酸]与聚二甲基二烯丙基氯化铵(PDDA)逐层静电自组装过程的紫外跟踪测试结果表明,带相反电荷的聚电解质间能够形成稳定增长的自组装膜,多层膜组装量随双层数指数增大.     

Fluorescence and viscometry study of complexation of poly(acrylic acid) with poly(acrylamide) and hydrolysed poly(acrylamide)

Interpolymer complexation of poly(acrylic acid) with poly(acrylamide) and hydrolysed poly(acrylamide) was studied by fluorescence spectroscopy and viscometry in dilute aqueous solutions. Changes in chain conformation and flexibility due to the interpolymer association are reflected in the intramolecular excimer fluorescence of pyrene groups covalently attached to the polymer chain. Both poly(acrylamide) and hydrolysed poly(acrylamide) form stable complexes with poly(acrylic acid) at low pH. The molecular weight of poly(acrylic acid) and solution properties such as pH and ionic strength were found to influence the stability and the structure of the complexes. In addition, the polymer solutions mixing time showed an effect on the mean stoichiometry of the complex. The intrinsic viscosity of the solutions of mixed polymers at low pH suggested a compact polymer structure for the complex.     

壳聚糖基聚合物负载钯配合物的制备及对Heck反应催化性能

以壳聚糖为基本原料制得壳聚糖缩水杨醛负载钯配合物(S-CTS-Pd)和交联壳聚糖缩水杨醛负载钯配合物(CL-S-CTS-Pd)两种催化剂,利用XPS、TG、DTA等手段对其进行了表征.两种催化剂不需在惰性气体氛围中就能有效地催化芳基碘与丙烯酸、苯乙烯的Heck反应,高产率地得到反式肉桂酸、1,2二苯乙烯,芳基碘上吸电子和供电子取代基的存在对反应没有明显影响.与S-CTS-Pd相比,CL-S-CTS-Pd在较低的温度或较少的催化剂用量下,对Heck反应仍有较高的催化活性.负载催化剂CL-S-CTS-Pd重复使用性能的研究表明,在催化碘苯与丙烯酸反应重复10次后,肉桂酸的产率仍达75.3%.     

Selective hydrogenation of monosubstituted alkenes by Pd nanoparticles embedded in polyelectrolyte films

Pd nanoparticles embedded in multilayer polyelectrolyte films can be easily prepared through layer-by-layer adsorption of poly(acrylic acid) (PAA) and poly(ethyleneimine)-Pd2+ (PEI-Pd(II)) complexes followed by reduction of Pd(II) with NaBH4. Transmission electron microscopy confirms the formation of Pd particles with diameters of 1-3 nm. Remarkably, [PAA/PEI-Pd(0)]3PAA films catalyze the hydrogenation of monosubstituted alkenes with turnover frequencies that are as much as 100-fold higher than turnover frequencies for hydrogenation of multiply substituted double bonds. Selectivities in the hydrogenation of monosubstituted over multisubstituted double bonds are higher than those of Wilkinson's catalyst. Moreover, the turnover frequency for the hydrogenation of allyl alcohol did not change when the catalyst was recycled three times. Intramolecular selectivity for the hydrogenation of monosubstituted alkenes also occurs when substrate molecules contain both mono and multiply substituted double bonds. The combination of the encapsulating polyelectrolyte film and small nanoparticles apparently results in hindered access of multiply substituted double bonds to catalytic sites.     

聚苯乙烯键合麻黄碱-Co(Ⅱ)络合物对烯烃环氧化反应的催化作用

聚苯乙烯键合麻黄碱 Ｃｏ（Ⅱ）络合物对烯烃环氧化反应的催化作用刘庆艳刘必前何纪纲（中国科学院化学研究所北京１０００８０）关键词环氧化，分子氧，烯烃，醛，高分子催化剂烯烃的环氧化反应是将烯烃进行氧化转化的重要反应［１］．由于高分子催化剂具有与反应...     

Recyclable Polymer‐Supported Nanometal Catalysts in Water

Two types of polymer‐supported nanometal catalysts with high catalytic activity and recyclability in water have been developed. One catalyst was composed of linear polystyrene‐stabilized metal nanoparticles (PS‐MtNPs). A palladium catalyst (PS‐PdONPs) was prepared in water by the thermal decomposition of Pd(OAc)₂ in the presence of polystyrene. The degree of immobilization of Pd, but not the size of the Pd nanoparticles, was dependent on the molecular weight and cross‐linking of the polystyrene. The PS‐PdONPs exhibited high catalytic activity for Suzuki, Heck, and Sonogashira coupling reactions in water and they could be recycled without loss of activity. Linear polystyrene was also suitable as a stabilizer for in situ generated PdNPs and PtNPs. The second catalyst was a polyion complex that was composed of poly[4‐chloromethylstyrene‐co‐(4‐vinylbenzyl)tributylammonium chloride] and poly(acrylic acid)‐stabilized PdNPs (PIC‐PdNPs). Aggregation and redispersion of PIC‐PdNPs were easily controlled by adjusting the pH value of the solution.     

Studies on the Synthesis of Sulfur-Containing Polymer-Rhodium Complexes and Their Use as Catalysts for Hydroformylation

A kind of nonphosphine polymer catalyst has been synthesized by partial substitution of the chlorine atoms of poly(vinyl chloride) with -SR groups (n-propyl, n-hexyl, benzyl, and p-tolyl). Rhodium complexes of these sulfur-containing polymer ligands are highly active catalysts for the hydroformylation of α-olefins. At 60°C and 60 kg/cm², conversion of 1-hexene was nearly complete within 4–6 h. The rhodium to 1-hexene mole ratio was 1/800 to 1/1 000, and the catalyst could be reused once again without losing activity. The effects of reaction temperature, pressure, H₂/CO ratio, S/Rh ratio, concentration of catalyst, and reaction time on the catalyst's activity were examined. The possible mechanism of hydroformylation is discussed. A copolymer of butyl vinyl sulfide and acrylonitrile was synthesized and its rhodium complex was prepared. The catalytic acitvities of this complex for the hydroformylation of 1-hexene was also investigated.     

Pervaporation and properties of chitosan-poly(acrylic acid) complex membranes

Polyelectrolyte complex membranes between chitosan as a cationic polyelectrolyte and poly(acrylic acid) as an anionic species were prepared by blending two polymer solutions in different ratio. Characterization of chitosan-poly(acrylic acid) complex membrane was investigated by Fourier transform-infrared (FT-IR), wide angle X-ray diffractometer, dielectric analyzer. Their mechanical properties were studied by universal testing machine. The swelling of polyelectrolyte membranes was studied. Thermal properties of polyelectrolyte membranes from chitosan and poly(acrylic acid) by varying blend ratios showed a shift in transition temperatures of polyelectrolyte complexes. Polyelectrolyte complex membranes from chitosan and poly(acrylic acid) had pH sensitive characteristics as determined by FT-IR studies and swelling behaviors. Pervaporation performances were investigated with various organic mixtures; water-ethanol, water-isopropanol, methanol-methyl t-butyl ether mixtures. An increase of poly(acrylic acid) content in the polyelectrolyte complex membranes affected the swelling behavior and pervaporation performance of water-ethanol mixture. Permeation flux decreased and the water concentration in the permeate was close to 100% upon increasing the feed alcohol concentration.     

Polymer-supported reagents. II. Kinetics of esterification of acrylic acid with n-butanol using polymer supported titanium tetrachloride as catalyst

Crosslinked poly(4-vinylpyridine-co-styrene) was prepared and functionalized with titanium tetrachloride to afford the corresponding poly(4-vinylpyridine-co-styrene)-titanium tetrachloride complex. This insoluble functionalized polymer-supported catalyst shows good catalytic activity for esterification reactions. In this article, the kinetics of esterification of acrylic acid with n-butanol is reported. The rate of formation of product depends on many experimental parameters, viz., stirring speed, concentration of acrylic acid, catalyst amount, temperature, percent active site, percent crosslinking, and mesh size of the polymer catalyst. The reaction rates were found to increase with increase in the stirring speed, concentration of acrylic acid, catalyst amount, and temperature, and decreases with increasing percentage crosslinking and mesh size of the polymer beads. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 727–733, 1997     

Selective hydrogenation by Pd nanoparticles embedded in polyelectrolyte multilayers

Alternating adsorption of poly(acrylic acid) and a polyethylenimine-Pd(II) complex on alumina and subsequent reduction of Pd(II) by NaBH4 yield catalytic Pd nanoparticles embedded in multilayer polyelectrolyte films. The polyelectrolytes limit aggregation of the particles and impart catalytic selectivity in the hydrogenation of alpha-substituted unsaturated alcohols by restricting access to catalytic sites. Hydrogenation of allyl alcohol by encapsulated Pd(0) nanoparticles can occur as much as 24-fold faster than hydrogenation of 3-methyl-1-penten-3-ol. Additionally, the nanoparticle/polyelectrolyte system suppresses unwanted substrate isomerization, when compared to a commercial palladium catalyst. Selective diffusion through poly(acrylic acid)/polyethlyenimine membranes suggests that hydrogenation selectivities are due to different rates of diffusion to nanoparticle catalysts. First-order kinetics are also consistent with a diffusion-limited mechanism. Further exploitation of the versatility of polyelectrolyte films should increase selectivity in hydrogenation as well as other reactions.     

Highly efficient and excellent reusable catalysts of molybdenum(VI) complexes grafted on ZPS‐PVPA for epoxidation of olefins with tert‐BuOOH

Four new kinds of heterogeneous catalysts for olefins epoxidation were obtained by grafting diamines on organic polymer–inorganic hybrid material, zirconium poly (styrene‐phenylvinylphosphonate)‐phosphate (ZPS‐PVPA), and subsequently coordinating with Schiff base Mo(VI) complexes. The catalysts were characterized by IR, XPS, SEM and TEM. All catalysts were evaluated through the epoxidation of olefins using tert‐BuOOH as oxidant. The heterogeneous catalysts possess the advantages of high conversion, selectivity and excellent reusability. The catalysts were easily separated from the reaction systems and could be reused 13 times without significant loss of catalytic activity. Copyright © 2010 John Wiley & Sons, Ltd.     

应用高分子铂络合物催化合成硅烷偶联剂

以二氧化硅为载体的侧链上含有配位基团和-COOH的聚硅氧烷(1-5)分别与氯铂酸反应制备了五种聚硅氧烷-铂络合物(“St-Pt-l”—“St-Pt-5”).这些高分子铂络合物,用于催化环氧丙基烯丙基醚与三甲及基氢硅烷反应具有很高的催化活性,在温和的条件下(80℃,30min),反应以72—98％的产率生成了硅烷偶联剂γ-(2,3-环氧丙氧基)丙基三甲氧基硅烷.通过对含,配位基的高分子铂络合物“Si-Pt-1”的稳定性研究,发现它可以重复使用多次而不降低其催化活性.     

镧对磷钒催化剂性能的影响

镧对磷钒催化剂性能的影响李铭岫，王心葵，杨述韬，张志新，刘翠格，周敬来（河北师范学院化学系，石家庄０５００９１；中国科学院山西煤炭化学研究所，太原０３０００１）关键词镧，磷钒催化剂，正丁烷，选择，氧化，顺丁烯二酸酐磷钒系催化剂是正了烷氧化制顺丁烯二酸...     

Catalytic Properties of Polymer-bound Imine Copper(Ⅱ) Complex

As heterogeneous catalyst, polymer metal complexes is stable in air, low corrosive, low toxic, easy to separate and reclaim,1,2 which superior than organic metal low-molecular complexes, so be paid close attention since 1960' and apply in industry gradually. There are many reports in polymer metal catalyst which is used in oxidation and hydrogenation3 In this paper, complexes of Cu(II) with polymer schiff base ligand: poly (dinitrobenzaldehyde aminating styrene)-Cu(PDNBA-Cu), poly(m-nitrobenzaldehyde aminating styrene)-Cu(PMNBA-Cu), poly(dihydroxybenzaldehyde aminating styrene)Cu(PDHBA-Cu), PDNBA-Cu-Phen were synthesized and characterized by FT-IR, XPS, GC-MS and element analysis. The results show that oxygen atom of hydroxide radical and nitrogen atom are both coordinating with Cu2+ and N:Cu≈ 1: 1. The results also show the complexes are well stability.     

二茂钛/锡/环氧化合物引发苯乙烯活性自由基聚合的研究

采用单茂钛CpTiCl3和二茂钛金属化合物(n-BuCp)2TiCl2,引发剂4-甲氧苯基缩水甘油基醚(I1),1,4-丁二醇二缩水甘油基醚(I2),4,4′-亚甲基二(N,N-二缩水甘油基苯胺)(I4)和苯基缩水甘油基醚甲醛共聚物(I5)及还原剂Sn组成引发体系,引发苯乙烯活性自由基聚合,合成线型和多臂聚合物.探讨了不同茂钛金属化合物、引发剂和还原剂对苯乙烯聚合的影响;并采用13C-NMR和GPC对聚苯乙烯的结构和性能进行了表征.结果表明所得聚合物是无规聚苯乙烯,聚合物分子量高,分子量分布窄.聚合行为属于活性自由基聚合.     

Investigation of Ion-Binding Properties of Synthetic Polyelectrolytes with The Tb[III] Luminescence Probe

The binding properties of trivalent metal ions to polyelectrolytes were investigated through the use of Tb(III) luminescence studies. The condensation of Tb(III) with the homopolymers poly(acrylic acid) and poly(methacrylic acid) was studied in detail. In addition, the 1 : 1 copolymers of maleic acid with ethylene, isobutene, and 2,4,4-trimethyl-1-pentene were also examined. The emission intensity of the 305 nm Tb(III) hypersensitive excitation band was found to correlate with the size of the alkyl group on the polymer chains. Tb(III) luminescence lifetime studies indicated that the metal ion binding site was equivalent over a wide range of Tb(III)/polymer ratios. The number of solvent molecules coordinated by Tb(III) in the various polymer complexes was determined and found to range between 3.5 and 4 molecules of water of hydration.     

DECARBOXYLATION OF ALLYL β-KETO ESTERS TO UNSATURATED KETONES ON POLYMER BOUND PHOSPHINE- PALLADIUM (0)COMPLEXES*

Polystyrylphosphine-Pd(0) and silica supported polysiloxane-phosphine-Pd(0) complexeswere synthesized and characterized. Their catalytic properties for the decarboxylation of allyl β-keto esters were investigated. It was found that these complexes have good catalytic activities undermild condition for this decarboxylation in which many novel unsaturated ketones were obtained.The selectivity of this catalytic decarboxylation depends on the polymer ligand and the P/Pd ratioof catalyst. The stabilities of polymer phosphine-Pd(O) complexes catalysts are better than theirhomogeneous analogue.     

镍配合物催化乙烯低聚/聚合的研究进展

催化乙烯低聚或聚合的镍配合物催化剂研究,不仅帮助提供探索乙烯配位聚合机理的催化剂模型,更为重要的帮助探讨不同催化剂模型下的催化剂活性和选择性,为工业界寻找具有潜在应用价值的高效催化剂奠定基础.同时,利用镍配合物催化剂容易导致所得聚烯烃树脂产生支链的特点,有望制备具有优异性能的支化聚烯烃树脂.本文综述了近年来镍配合物在乙烯低聚或聚合催化剂研究方面的进展,并特别强调了催化剂结构和催化性能之间的内在规律.     

Polymerization of 1-methoxy-1-ethynylcyclohexane by transition metal catalysts

The polymerization of 1-methoxy-1-ethynylcyclohexane (MEC) was carried out by various transition metal catalysts. The catalysts MoCl₅, MoCl₄, and WCl₆ gave a relatively low yield of polymer (≤ 16%). The catalytic activity of Mo-based chloride catalyst was greater than that of W-based chloride catalyst. However, catalyst tungsten carbene complex (I) gave a larger molar mass and higher yield in the presence of a Lewis acid such as AlCl₃ than in the absence of a Lewis acid. The activity of the tungsten carbene complex was obviously affected by Lewis acidity. The catalyst PdCl₂ was a very effective catalyst for the present polymerization and gave polymers in a high yield. The structure of the resulting poly(MEC) was identified by various instrumental methods as a conjugated polyene structure having an α-methoxycyclohexyl substituent. The poly(MEC)s were mostly light-brown powders and completely soluble in various organic solvents such as tetrahydrofuran (THF), chloroform (CHCl₃), ethylacetate, n-butylacetate, dimethylformamide, benzene, xylene, dimethylacetamide, 1,4-dioxane, pyridine, and 1-methyl-2-pyrrolidinone. Thermogravimetric analysis showed that the polymer started to lose mass at 125°C and that maximum decomposition occurred at 418°C. The x-ray diffraction diagram shows that poly(MEC) has an amorphous structure. © 1997 John Wiley & Sons, Inc.