离子速度成像系统校准及1,4-氯溴丁烷的紫外光解动力学

大气臭氧层破坏越来越严重, 卤代烷烃在太阳紫外线辐射下解离生成破坏臭氧的游离态卤素原子, 是主要元凶之一. 本文选用碘甲烷作为校准分子, 利用离子速度成像技术和共振增强多光子电离技术测得碘甲烷在266 nm紫外光解离下产生的基态碘原子I(²P_3/2)在不同聚焦电压下的离子速度影像, 得到离子速度成像系统的放大系数N=1.13. 并利用该系统研究了1, 4-氯溴丁烷在～ 234 nm紫外辐射下的解离动力学, 分析讨论了解离产生的基态Br (²P_3/2)和激发态Br^* (²P_1/2)的速度和角度分布信息, 揭示了1, 4-氯溴丁烷在～ 234 nm紫外光解离产生基态Br原子和激发态Br^* 原子的通道都是源于C-Br键排斥势能面上的快速解离. 文中通过计算碎片影像角度分布的各项异性参数β值, 得到了生成基态Br(²P_3/2)和激发态Br^* (²P_1/2) 两个解离通道中的平行跃迁和垂直跃迁比例. 另外, 本文还对氯溴甲烷, 1, 2-氯溴乙烷, 1, 3-氯溴丙烷和1, 4-氯溴丁烷在～ 234 nm下的光解动力学进行比较, 分析得到双卤代烷烃分子解离机理对烷基支链长度的依赖关系.     

使用时间切片离子速度成像技术研究CF2Cl2光解动力学

本文使用时间切片离子速度成像技术结合共振增强多光子电离技术研究了CF₂Cl₂分子在235 nm附近的光解动力学. 通过测量CF₂Cl₂分子在235 nm附近单光子解离产生的氯原子影像,直接得到了解离产物的速度分布和角分布. 激发态氯原子的速度分布包含高动能组分和低动能组分,分别对应³Q₀电子态的直接解离和由于内转换引起的基态预解离. 基态氯原子的速度分布也包含高动能组分和低动能组分,分别对应³Q₀与¹Q₁电子态的预解离和由于内转换引起的基态预解离. 自由基解离通道被确认,二次解离通道和三体解离通道被排除.     

225∽260 nm波段溴化氰光解动力学系统性研究

本文报道了在自行搭建的时间切片离子速度成像装置上进行的225∽260 nm波段内溴化氰光解动力学的研究. 在该波段内选取了若干溴原子(²P_3/2或²P_1/2)的共振线对产物溴原子的共振电离并采集其切片影像,得到了光解产物的总平动能谱,进而获得了产物氰基的振转态布居等信息. 本文发现了在Br^*通道,产物氰基的内能激发比Br通道低;Br和Br^*通道产物氰基振动的最高布居分别为v=0和1. 另外,还发现对于Br通道,溴化氰分子在长波处与短波处解离时,氰基产物的振转激发差异很大,这揭示了其显著不同的光解动力学.     

CS分子在207 nm的光解动力学研究：S(1D2)+CO(X1Σ+)产物通道

利用直流时间切片离子成像技术对OCS分子在紫外波段207 nm的光解产物S(¹D₂)进行了偏振实验研究. 通过在两种不同的共振增强多光子电离中间态,¹F₃和¹P₁, 以及四种不同的泵浦-探测激光偏振几何构型下探测了光碎片S(¹D₂)的角动量极化特性. 使用分子坐标系极化模型和实验室坐标系各向异性模型提取和分析出对应产物CO(X¹Σ⁺)的角分布.观测到的总平动能释放谱表明解离过程存在三种解离通道,分别对应于低、中、高平动能解离通道. 低、中平动能通道的来源与光解波长在较长波长下得到的双峰分布来源一致. 高平动能通道是一种新的解离通道,它来自于单重排斥态A(2¹A'')的直接解离.     

HNCO在201 nm的离子成像光解动力学:CO(X1Σ+)与NH(a1Δ)

本文通过时间切片离子速度成像技术在201 nm附近研究了HNCO分子在S₁电子激发态的光解动力学. CO产物通过共振增强多光子电离的方法进行了选态探测,获得了CO产物的振动基态和激发态切片影像. 从CO的影像得到了解离产物的能量分布和空间角分布,确定了NH(a¹Δ)产物的振转态分布信息. 研究发现¹NH的振动分支比(v=1/v=0)随CO(v=0)转动能的增大先增大后下降,展现了¹NH与CO之间特殊的态态相关性. 大约一半的可资用能分配给解离产物的平动自由度. 负的各向异性参数表明HNCO的光解是个快速的直接解离过程.     

N2O+离子A2Σ+电子态高振动能级的转动结构分析

利用一束波长为36055nm的激光，通过(3+1)共振多光子电离方法制备纯净的且处于X²Π_1/2，3/2(000)态的N₂O⁺离子，用另一束激光激发所制备的离子到第一电子激发态A²Σ⁺的不同振动能级，然后解离，通过检测解离碎片NO⁺强度随光解光波长的变化，得到了转动分辨的N₂     

利用时间切片离子速度成像技术对AlO在193 nm的光解反应动力学研究

本文利用时间切片离子速度成像技术对AlO分子在193 nm下的光解反应动力学进行了研究. 实验通过产物Al⁺的离子速度和角度分布分析,发现了两个光解离反应通道,分别为中性AlO分子的单光子解离生成产物Al(²P_u)+O(³P_g)的通道,和AlO分子吸收两个光子电离产生AlO⁺进而解离生成产物为Al⁺(¹S_g)+O(³P_g)的反应通道. 每一个解离通道包括了AlO(v=0∽2)振动态的贡献,其中中性解离反应通道与离子解离反应通道相比,产物的各向异性参数对AlO的振动态依赖更大.     

乙醛光解动力学的离子速度成像

利用时间切片离子速度成像技术在275～321 nm能量范围内重新研究了乙醛自由基通道CH₃+HCO的光解动力学. 通过共振增强多光子电离的方法探测甲基碎片. 对甲基的伞形振动基态和激发态(v₂=0和1)进行了影像探测. 乙醛通过T₁电子态系间窜越到S₁电子态的解离产物具有很高的动能释放和很低的内能激发,碎片的振动能和转动能随激发能量的增加而增加. 乙醛T₁电子态的势垒高度经测量高于基电子态3.881±0.006 eV.     

利用时间分辨的光电子影像技术研究2,6-二甲基吡啶分子锥形交叉超快动力学

利用时间分辨的飞秒光电子影像技术结合时间分辨的质谱技术,研究了2,6-二甲基吡啶分子锥形交叉超快动力学过程. 2,6-二甲基吡啶分子吸收266 nm泵浦光从基态跃迁至S₂态(π-π^*). 母体离子时间变化曲线包含两个指数函数,一个是时间常数为635 fs的快速组分,另一个是时间常数为4.37 ps的慢速组分. 通过时间分辨光电子影像得到的时间依赖的光电子角度分布和能量分辨的光电子谱分布提供了S₂态演变的动力学信息. 简言之,快速组分反映了通     

飞秒激光激发空气电离的阈值研究

报道在脉宽50fs—22ps，波长800nm脉冲激光作用下的空气电离阈值的研究结果.利用探测等离子体发光信号的方法，实验测量了激发空气电离所需的阈值激光强度.结果表明，当激光脉冲宽度从50fs增加到22ps时，阈值光强I_th从8.7×10¹⁴W/cm²下降到2.7×10¹³W/cm²；I_th经历了由迅速降低逐渐发展为缓慢降低的过程.在50fs—1p     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.