Calcium‐Catalyzed Arene C−H Bond Activation by Low‐Valent AlI

The low‐valent ß‐diketiminate complex (^DIPPBDI)Al is stable in benzene but addition of catalytic quantities of [(^DIPPBDI)CaH]₂ at 20 °C led to (^DIPPBDI)Al(Ph)H (^DIPPBDI=CH[C(CH₃)N‐DIPP]₂, DIPP=2,6‐diisopropylphenyl). Similar Ca‐catalyzed C?H bond activation is demonstrated for toluene or p‐xylene. For toluene a remarkable selectivity for meta‐functionalization has been observed. Reaction of (^DIPPBDI)Al(m‐tolyl)H with I₂ gave m‐tolyl iodide, H₂ and (^DIPPBDI)AlI₂ which was recycled to (^DIPPBDI)Al. Attempts to catalyze this reaction with Mg or Zn hydride catalysts failed. Instead, the highly stable complexes (^DIPPBDI)Al(H)M(^DIPPBDI) (M=Mg, Zn) were formed. DFT calculations on the Ca hydride catalyzed arene alumination suggest that a similar but more loosely bound complex is formed: (^DIPPBDI)Al(H)Ca(^DIPPBDI). This is in equilibrium with the hydride bridged complex (^DIPPBDI)Al(μ‐H)Ca(^DIPPBDI) which shows strongly increased electron density at Al. The combination of Ca‐arene bonding and a highly nucleophilic Al center are key to facile C?H bond activation.     

Stabilized Carbenium Ions as Latent,Z‐type Ligands

Controlling the reactivity of transition metals using secondary, σ‐accepting ligands is an active area of investigation that is impacting molecular catalysis. Herein we describe the phosphine gold complexes [(o‐Ph₂P(C₆H₄)Acr)AuCl]⁺ ([ 3 ]⁺; Acr=9‐N‐methylacridinium) and [(o‐Ph₂P(C₆H₄)Xan)AuCl]⁺ ([ 4 ]⁺; Xan=9‐xanthylium) where the electrophilic carbenium moiety is juxtaposed with the metal atom. While only weak interactions occur between the gold atom and the carbenium moiety of these complexes, the more Lewis acidic complex [ 4 ]⁺ readily reacts with chloride to afford a trivalent phosphine gold dichloride derivative ( 7 ) in which the metal atom is covalently bound to the former carbocationic center. This anion‐induced Au^I/Au^III oxidation is accompanied by a conversion of the Lewis acidic carbocationic center in [ 4 ]⁺ into an X‐type ligand in 7 . We conclude that the carbenium moiety of this complex acts as a latent Z‐type ligand poised to increase the Lewis acidity of the gold center, a notion supported by the carbophilic reactivity of these complexes.     

Comparative Study of Ruthenium(II) and Ruthenium(III) Complexes with the Ligand dmbpy (dmbpy = 4, 4′‐Dimethyl‐2, 2′‐bipyridine)

The complex cis‐[Ru^III(dmbpy)₂Cl₂](PF₆) ( 2 ) (dmbpy = 4, 4′‐dimethyl‐2, 2′‐bipyridine) was obtained from the reaction of cis‐[Ru^II(dmbpy)₂Cl₂] ( 1 ) with ammonium cerium(IV) nitrate followed by precipitation with saturated ammonium hexafluoridophosphate. The ¹H NMR spectrum of the Ru^III complex confirms the presence of paramagnetic metal atoms, whereas that of the Ru^II complex displays diamagnetism. The ³¹P NMR spectrum of the Ru^III complex shows one signal for the phosphorus atom of the PF₆^– ion. The perspective view of each [Ru^II/III(dmbpy)₂Cl₂]^0/+ unit manifests that the ruthenium atom is in hexacoordinate arrangement with two dmbpy ligands and two chlorido ligands in cis position. As the oxidation state of the central ruthenium metal atom becomes higher, the average Ru–Cl bond length decreases whereas the Ru–N (dmbpy) bond length increases. The cis‐positioned dichloro angle in Ru^III is 1.3° wider than that in the Ru^II. The dihedral angles between pair of planar six‐membered pyridyl ring in the dmbpy ligand for the Ru^II are 4.7(5)° and 5.7(4)°. The observed inter‐planar angle between two dmbpy ligands in the Ru^II is 89.08(15)°, whereas the value for the Ru^III is 85.46(20)°.     

Metal Ion‐tuned Complexes based on Benzene‐1, 2, 4, 5‐tetracarboxylic Acid and the Semirigid Ligand 1, 4‐Bis(2‐methylbenzimidazol‐1‐ylmethyl) Benzene

Abstract. Two metal‐organic coordination polymers [Co(bmb)(btc)_0.5]_n( 1 ) and {[Zn(bmb)_0.5(btc)_0.5(H₂O)] · 0.5bmb · H₂O}_n ( 2 ) [H₄btc = benzene‐1, 2, 4, 5‐tetracarboxylic acid, bmb = 1, 4‐bis(2‐methylbenzimidazol‐1‐ylmethyl) benzene] were prepared under hydrothermal conditions. Single‐crystal X‐ray diffraction indicates that both complexes have a 2D framework structure with (4 · 6²) (4² · 6² · 8²) topology. Interestingly, the hydrogen bonds in 2 form a fascinating meso‐helix. The catalytic activity of 1 for oxidative coupling of 2, 6‐dimethylphenol (DMP) and the photoluminescence properties of 2 were investigated. Furthermore, the complexes were investigated by IR spectroscopy and thermogravimetric analysis.     

Synthesis and Structures of New Oxidation/ Cycloaddition Products of λ3‐Cyclodiphosphazanes

Reaction of the cyclodiphosphazane [(OC₄H₈N)P(μ‐N‐t‐Bu)₂P(HN‐t‐Bu)] ( 1 ) with an equimolar quantity of diisopropyl azodicarboxylate afforded the phosphinimine product [(OC₄H₈N)P(μ‐N‐t‐Bu)₂P=N‐t‐Bu)(N(CO₂ ‐i‐Pr)NHCO₂‐i‐Pr] ( 6 ) having a P^III‐N‐P^V skeleton. Similar products [(t‐BuNH)P(μ‐N‐t‐Bu)₂P=N‐t‐Bu)(N(CO₂Et)NHCO₂Et] ( 7 ) and [(CO₂‐i‐Pr)HNN(CO₂‐i‐Pr)](t‐BuN=P(μ‐N‐t‐Bu)₂POCH₂CMe₂CH₂O[P(μ‐N‐t‐Bu)₂P=N‐t‐Bu)(N(CO₂‐i‐Pr)NH(CO₂‐i‐Pr)] ( 8 ) were spectroscopically characterized in the reaction of [(t‐BuNH)P‐N‐t‐Bu]₂ ( 2 ) and [(t‐BuNH)P(μ‐N‐t‐Bu)₂POCH₂CMe₂CH₂OP(μ‐N‐t‐Bu)₂P(NH‐t‐Bu)] ( 3 ) with diethyl‐ and diisopropyl azodicarboxylate, respectively. By contrast, the reaction of [(μ‐t‐BuN)P]₂[O‐6‐t‐Bu‐4‐Me‐C₆H₂]₂CH₂ ( 4 ) and [(C₅H₁₀N)P‐μ‐N‐t‐Bu]₂ ( 5 ) with diisopropyl azodicarboxylate afforded the mono‐ and bis‐oxidized compounds [(O)P(μ‐N‐t‐Bu)₂P][O‐6‐t‐Bu‐4‐Me‐C₆H₂]₂CH₂ ( 9 ) and [(C₅H₁₀N)(O)P‐μ‐N‐t‐Bu]₂ ( 10 ), respectively. Oxidative addition of o‐chloranil to 7 and its DIAD analogue [(t‐BuNH)P(μ‐N‐t‐Bu)₂P=N‐t‐Bu)(N(CO₂‐i‐Pr)NHCO₂‐i‐Pr] ( 11 ) afforded [(C₆Cl₄‐1, 2‐O₂)(t‐BuNH)P(μ‐N‐t‐Bu)₂P=N‐t‐Bu)(N(CO₂R)NHCO₂R] [R = Et ( 12 ) and i‐Pr ( 13 )] containing tetra‐ and pentacoordinate P^V atoms in the cyclodiphosphazane ring. The structures of 6 , 9 , 12 and 13 have been confirmed by X‐ray structure determination. For comparison, the X‐ray structure of the double cycloaddition product [(C₆Cl₄‐1, 2‐O₂)(t‐BuNH)PN‐t‐Bu]₂ ( 14 ), obtained from the reaction of 2 with two mole equivalents of o‐chloranil is also reported.     

Building the “Phosphoindigo” Backbone by Oxidative Coupling of Phosphindolin‐3‐ones with Selenium Dioxide

Oxidative coupling of racemic 1‐ethoxy‐1‐oxophosphindolin‐3‐one ( 1 ) and its 5‐CF₃‐derivative 6 with SeO₂ furnishes 1,1′‐diphosphaindigo derivatives 5 and 7 as bis‐phosphinic esters, i. e. as P^V‐compounds. Like indigo and thioindigo, 5 and 7 exist in the E‐configuration; the crude products of 5 and 7 are mixtures of isomers that are trans‐ and cis‐configurated with respect to the relative orientation of the ester groups oat phosphorus. The structure of the centrosymmetric E‐P(R)P′(S) isomer [(E)‐trans‐isomer] of 5 was determined by X‐ray crystallography. Ester cleavage of 5 , followed by addition of triethylamine to bis‐phosphinic acid 9 (the 1,1,1′,1′‐tetroxide of “phosphoindigo”), furnishes the related bis‐triethylammonium salt 10 as a crystalline hydrate that exhibits an extended hydrogen bonding network.     

Ein‐ und zweikernige Rhodiumkomplexe mit Arsino(phosphino)methanen in unterschiedlichen Koordinationsformen

Mono‐ and Dinuclear Rhodium Complexes with Arsino(phosphino)methanes in Different Coordination Modes The cyclooctadiene complex [Rh(η⁴‐C₈H₁₂)(κ²‐tBu₂AsCH₂PiPr₂)](PF₆) ( 1a ) reacts with CO and CNtBu to give the substitution products [Rh(L)₂(κ²‐tBu₂AsCH₂PiPr₂)](PF₆) ( 2 , 3 ). From 1a and Na(acac) in the presence of CO the neutral compound [Rh(κ²‐acac)(CO)(κ‐P‐tBu₂AsCH₂PiPr₂)] ( 4 ) is formed. The reactions of 1a , the corresponding B(Ar_F)₄‐salt 1b and [Rh(η⁴‐C₈H₁₂)(κ²‐iPr₂AsCH₂PiPr₂)](PF₆) ( 5 ) with acetonitrile under a H₂ atmosphere affords the complexes [Rh(CH₃CN)₂(κ²‐R₂AsCH₂PiPr₂)]X ( 6a , 6b , 7 ), of which 6a (R = tBu; X = PF₆) gives upon treatment with Na(acac‐f₆) the bis(chelate) compound [Rh(κ²‐acac‐f₆)(κ²‐tBu₂AsCH₂PiPr₂)] ( 8 ). From 8 and CH₃I a mixture of two stereoisomers of composition [Rh(CH₃)I(κ²‐acac‐f₆)(κ²‐tBu₂AsCH₂PiPr₂)] ( 9/10 ) is generated by oxidative addition, and the molecular structure of the racemate 9 has been determined. The reactions of 1a and 5 with CO in the presence of NaCl leads to the formation of the “A‐frame” complexes [Rh₂(CO)₂(μ‐Cl)(μ‐R₂AsCH₂PiPr₂)₂](PF₆) ( 11 , 12 ), which have been characterized crystallographically. From 11 and 12 the dinuclear substitution products [Rh₂(CO)₂(μ‐X)(μ‐R₂AsCH₂PiPr₂)₂](PF₆) ( 13 ‐ 16 ) are obtained by replacing the bridging chloride for bromide, hydride or hydroxide, respectively. While 12 (R = iPr) reacts with NaI to give the related “A‐frame” complex 18 , treatment of 11 (R = tBu) with NaI yields the mononuclear chelate compound [RhI(CO)(κ²‐tBu₂AsCH₂PiPr₂)] ( 20 ). The reaction of 20 with CH₃I affords the acetyl complex [RhI₂{C(O)CH₃}(κ²‐tBu₂AsCH₂PiPr₂)] ( 21 ) with five‐coordinate rhodium atom.     

Oxidative Degradation of 2,4‐Dihydroxybenzoic Acid by the Fenton and Photo‐Fenton Processes: Kinetics,Mechanisms, and Evidence for the Substitution of H2O2 by O2

The kinetics and mechanisms of the oxidative degradation of 2,4‐dihydroxybenzoic acid (2,4‐DHBA) by the Fenton and photo‐Fenton processes were investigated in detail by a combination of HPLC, IC, and TOC analyses. The formation of 2,3,4‐trihydroxybenzoic acid (2,3,4‐THBA) at an early oxidation stage shows that hydroxylation of the aromatic ring is the first step of the process. This intermediate was able to reduce Fe^III and to contribute to the recycling of Fe^II. Complete mineralization could only be achieved under irradiation (photo‐Fenton). A detailed study of the dependence of the rate of mineralization on the concentration of H₂O₂ and dissolved O₂ was carried out. It was found that, even at a low initial concentration of H₂O₂, mineralization by the photo‐Fenton process was complete in a relatively short time, provided that the O₂ concentration was high enough, indicating that O₂ may, at least in part, substitute H₂O₂. Channeling reaction pathways toward O₂ rather than H₂O₂ consumption is of particular interest for the technical development of the photo‐Fenton process.     

Stable N‐Heterocyclic Germylenes of the Type [Fe{(η5‐C5H4)NR}2Ge] and Their Oxidation Reactions with Sulfur,Selenium, and Diphenyl Diselenide

Three new N‐heterocyclic germylenes of the type [Fe{(η⁵‐C₅H₄)NR}₂Ge] ( 1R Ge) containing particularly bulky alkyl [R = 2‐adamantyl (Ad), 1,1,2,2‐tetramethylpropyl (Pr*)] or aryl substituents [R = 2,6‐diisopropylphenyl (Dipp)] were prepared and structurally characterized, in two cases (R = Ad, Dipp), by single‐crystal X‐ray diffraction. Together with the previously described homologues with R = trimethylsilyl (TMS), tert‐butyl (tBu), and mesityl (Mes) their oxidative addition reactions with S₈ and Se₈ were studied, which afforded compounds of the type [ 1R Ge(μ‐E)]₂ (E = S, Se). The low solubility of most of these products severely hampered their purification and characterization. Nevertheless, their structural characterization by single‐crystal X‐ray diffraction was possible in six cases (E = S, R = Ad, Pr*; E = Se, R = Ad, Pr*, Mes, Dipp). No solubility problems were encountered in oxidative addition reactions with diphenyl diselenide, affording products of the type 1R Ge(SePh₂)₂, whose crystal structures could be determined in four cases (R = TMS, tBu, Mes, Dipp). Short intramolecular CH ··· Se contacts compatible with hydrogen bonds were observed for [ 1Ad Ge(μ‐Se)]₂, [ 1Pr* Ge(μ‐Se)]₂, and 1tBu Ge(SePh₂)₂.     

1‐Oxa‐nido‐dodecaborate [OB11H12]− from the Controlled Oxidation of the closo‐Borates [B11H11]2− and [B12H12]2−

The closo‐dodecaborate [B₁₂H₁₂]^2? is degraded at room temperature by oxygen in an acidic aqueous solution in the course of several weeks to give B(OH)₃. The degradation is induced by Ag²⁺ ions, generated from Ag⁺ by the action of H₂S₂O₈. Oxa‐nido‐dodecaborate(1?) is an intermediate anion, that can be separated from the reaction mixture as [NBzlEt₃][OB₁₁H₁₂] after five days in a yield of 18 %. The action of FeCl₃ on the closo‐undecaborate [B₁₁H₁₁]^2? in an aqueous solution gives either [B₂₂H₂₂]^2? (by fusion) or nido‐B₁₁H₁₃(OH)^? (by protonation and hydration), depending on the concentration of FeCl₃. In acetonitrile, however, [B₁₁H₁₁]^2? is transformed into [OB₁₁H₁₂]^? by Fe³⁺ and oxygen. The radical anions [B₁₂H₁₂] ^{˙ ?} and [B₁₁H₁₁] ^{˙ ?} are assumed to be the primary products of the oxidation with the one‐electron oxidants Ag²⁺ and Fe³⁺, respectively. These radical anions are subsequently transformed into [OB₁₁H₁₂]^? by oxygen. The crystal structure analysis shows that the structure of [OB₁₁H₁₂]^? is derived from the hypothetical closo‐oxaborane OB₁₂H₁₂ by removal of the B3 vertex, leaving a non‐planar pentagonal aperture with a three‐coordinate O vertex, as predicted by NMR spectra and theory.     

Oxidative and Photochemical Stability of Ionomers for Fuel‐Cell Membranes

To predict hydroxyl‐radical‐initiated degradation of new proton‐conducting polymer membranes based on sulfonated polyetherketones (PEK) and polysulfones (PSU), three nonfluorinated aromatics are chosen as model compounds for EPR experiments, aiming at the identification of products of HO^.‐radical reactions with these monomers. Photolysis of H₂O₂ was chosen as the source of HO^. radicals. To distinguish HO^.‐radical attack from direct photolysis of the monomers, experiments were carried out in the presence and absence of H₂O₂. A detailed investigation of the pH dependence was performed for 4,4′‐sulfonylbis[phenol] ( SBP ), bisphenol A (= 4,4′‐isopropylidenebis[phenol]; BPA ), and [1,1′‐biphenyl]‐4,4′‐diol ( BPD ). At pH ≥ pK_A of HO^. and H₂O₂, reactions between the model compounds and O₂^.? or ¹O₂ are the most probable ways to the phenoxy and ‘semiquinone’ radicals observed in this pH range in our EPR spectra. A large number of new radicals give evidence of multiple hydroxylation of the aromatic rings. Investigations at low pH are particularly relevant for understanding degradation in polymer‐electrolyte fuel cells (PEFCs). However, the chemistry depends strongly on pH, a fact that is highly significant in view of possible pH inhomogeneities in fuel cells at high currents. It is shown that also direct photolysis of the monomers leads to ‘semiquinone’‐type radicals. For SBP and BPA , this involves cleavage of a C? C bond.     

Herba Ecliptae Protects against Hydroxyl Radical‐induced Damages to DNA and Mesenchymal Stem Cells via Antioxidant Mechanism

Herba Ecliptae (HE) is a typical Chinese herbal medicine used in China for 1500 years. In the study, HE was extracted by various solvents to prepare five HE extracts. They were observed to possess a protective effect against ×OH‐induced DNA damage, and scavenging effects on ×OH radical, ×O₂^? radical, DPPH×(1,1‐diphenyl‐2‐picrylhydrazyl) radical, and ABTS×⁺ (2,2′‐azino‐bis(3‐ethyl‐benzothiazoline‐6‐sulfonic acid) radical, and reduce Cu²⁺ ion. The contents of total phenolics and wedelolactone in five extracts were determined respectively using Folin‐Ciocalteu method and HPLC method. To identify which chemical component can be responsible for its effects, the correlation graphs between chemical contents and antioxidant abilities (1/IC₅₀ values) were plotted to calculate correlation coefficients (R values). Finally, MTT assay revealed that two HE extracts could effectively protect mesenchymal stem cells (MSCs) against ×OH‐induced damage at 3‐30 μg/mL. On the basis of mechanistic analysis, we concluded that: (i) HE can effectively protect against ×OH‐induced damages to DNA and MSCs, thereby HE may have a therapeutic potential in MSCs transplantation or prevention of many diseases; (ii) the effects can be mainly attributed to total phenolics (R = 0.678) especially wedelolactone (R = 0.618); (iii) they exert antioxidant action via hydrogen atom transfer (HAT) and sequential electron proton transfer (SEPT) mechanisms.     

On the Reaction of Triaryl Trithioarsenites, (ArS)3As,with Octasulfur

para‐Substituted with electron donating or electron withdrawing groups triphenyl trithioarsenites, (ArS)₃As, and octasulfur in refluxing carbon disulfide or chloroform do not give the triaryl tetrathioarsenates, (ArS)₃As=S, as was claimed in the literature for tris(4‐methylphenyl) tetrathioarsenate. In some cases oxidative decomposition to As₂O₃ and disulfides ArSSAr was found. When equivalent amounts of the same esters and octasulfur were heated at 105 or 150 °C no As^V compound was detected or isolated and again some esters decomposed to As₂O₃ and disulfides. These experiments demonstrated that the aromatic trithioarsenites do not react with octasulfur, probably because they cannot open the octasulfur ring. These esters in solution react with octasulfur in the presence of a catalytic (10—20 mol%) amount of triethylamine giving disulfides, As₂O₃ and colored solids which could not be characterized.     

An NHC–Silyl–NHC Pincer Ligand for the Oxidative Addition of C−H,N−H,and O−H Bonds to Cobalt(I) Complexes

N‐Heterocyclic carbene based pincer ligands bearing a central silyl donor, [CSiC]⁻, have been envisioned as a class of strongly σ‐donating ligands that can be used for synthesizing electron‐rich transition‐metal complexes for the activation of inert bonds. However, this type of pincer ligand and complexes thereof have remained elusive owing to their challenging synthesis. We herein describe the first synthesis of a CSiC pincer ligand scaffold through the coupling of a silyl–NHC chelate with a benzyl–NHC chelate induced by one‐electron oxidation in the coordination sphere of a cobalt complex. The monoanionic CSiC ligand stabilizes the Co^I dinitrogen complex [(CSiC)Co(N₂)] with an unusual coordination geometry and enables the challenging oxidative addition of E−H bonds (E=C, N, O) to Co^I to form Co^III complexes. The structure and reactivity of the cobalt(I) complex are ascribed to the unique electronic properties of the CSiC pincer ligand, which provides a strong trans effect and pronounced σ‐donation.     

Tritopic NHC Precursors: Unusual Nickel Reactivity and Ethylene Insertion into a C(sp3)–H Bond

The imidazolium chloride [C₃H₃N(C₃H₆NMe₂)N{C(Me)(=NDipp)}]Cl ( 1 ; Dipp=2,6‐diisopropyl phenyl), a potential precursor to a tritopic N^imineC^NHCN^amine pincer‐type ligand, reacted with [Ni(cod)₂] to give the Ni^I‐Ni^I complex 2 , which contains a rare cod‐derived η³‐allyl‐type bridging ligand. The implied intermediate formation of a nickel hydride through oxidative addition of the imidazolium C−H bond did not occur with the symmetrical imidazolium chloride [C₃H₃N₂{C(Me)(=NDipp)}₂]Cl ( 3 ). Instead, a Ni−C(sp³) bond was formed, leading to the neutral N^imineCHN^imine pincer‐type complex Ni[C₃H₃N₂{C(Me)(=NDipp)}₂]Cl ( 4 ). Theoretical studies showed that this highly unusual feature in nickel NHC chemistry is due to steric constraints induced by the N substituents, which prevent Ni−H bond formation. Remarkably, ethylene inserted into the C(sp³)−H bond of 4 without nickel hydride formation, thus suggesting new pathways for the alkylation of non‐activated C−H bonds.     

RhIAr/AuIAr′ Transmetalation: A Case of Group Exchange Pivoting on the Formation of M−M′ Bonds through Oxidative Insertion

By combining kinetic experiments, theoretical calculations, and microkinetic modeling, we show that Pf/Rf (C₆F₅/C₆Cl₂F₃) exchange between [AuPf(AsPh₃)] and trans‐[RhRf(CO)(AsPh₃)₂] does not occur by typical concerted Pf/Rf transmetalation via electron‐deficient double bridges. Instead, it involves asymmetric oxidative insertion of the Rh^I complex into the (Ph₃As)Au?Pf bond to produce a [(Ph₃As)Au?RhPfRf(CO)(AsPh₃)₂] intermediate, followed by isomerization and reductive elimination of [AuRf(AsPh₃)]. Interesting differences were found between the LAu?Ar asymmetric oxidative insertion and the classical oxidative addition process of H₂ to Vaska complexes.     

Nuclease activity of redox/non-redox active binuclear transition metal mixed-polypyridine complexes: [M2(1,4-tpbd)(diimine)2(H2O)2]4+, M = Zn,Co, Ni,Cd, diimine = phen,bpy, dafo

Seven new transition metal complexes formulated as [M₂(1,4-tpbd)(diimine)₂(H₂O)₂]⁴⁺ [M = Zn, Co, Ni, Cd; 1,4-tpbd = N,N,N′,N′-tetrakis(2-pyridylmethyl)benzene-1,4-diamine; diimine is a N,N-donor heterocyclic base like 1,10-phenanthroline (phen), 2,2′-bipyridine (bpy), 4,5-diazafluoren-9-one (dafo)] have been synthesized and structurally characterized by X-ray crystallography: [Zn₂(1,4-tpbd)(phen)₂(H₂O)₂]⁴⁺ (1), [Zn₂(1,4-tpbd)(bpy)₂(H₂O)₂]⁴⁺ (2), [Co₂(1,4-tpbd)(phen)₂(H₂O)₂]⁴⁺ (3), [Ni₂(1,4-tpbd)(phen)₂(H₂O)₂]⁴⁺ (4), [Ni₂(1,4-tpbd)(bpy)₂(H₂O)₂]⁴⁺ (5), [Ni₂(1,4-tpbd)(dafo)₂(H₂O)₂]⁴⁺ (6) and [Cd₂(1,4-tpbd)(phen)₂(H₂O)₂]⁴⁺ (7). Single crystal diffraction reveals that the metals in the complexes are all in a distorted octahedral geometry. The interactions of the seven complexes with calf thymus DNA (CT-DNA) have been investigated by UV absorption, fluorescence, circular dichroism spectroscopy and viscosity measurements. The apparent binding constants (K_app) are calculated to be 5.2?×?10⁵ M^?1 for 1, 1.05?×?10⁵ M^?1 for 2, 5.76?×?10⁵ M^?1 for 3, 4.57?×?10⁵ M^?1 for 4, 1.29?×?10⁵ M^?1 for 5, 1.7?×?10⁵ M^?1 for 6, 2.53?×?10⁵ M^?1 for 7, the binding propensity to the calf thymus DNA in the order: 3 (Co-phen) > 1 (Zn-phen) > 4 (Ni-phen) > 7 (Cd-phen) > 6 (Ni-dafo) > 5 (Ni-bpy) > 2 (Zn-bpy). Furthermore, these complexes display efficient oxidative cleavage of supercoiled DNA; the Zn(II)/H₂O₂ and Cd(II)/H₂O₂ systems efficiently cleave DNA attributed to the peroxide ion coordinated to the Zn(II) and Cd(II), which enhanced their nucleophilicity, this is rare.     

Preparation and Characterization of Dinuclear Chromium(III) Complexes of a Hexadentate Tetraaza‐Dithiophenolate Ligand

The ability of the tetraaza‐dithiophenolate ligand H₂L² (H₂L² = N,N′‐Bis‐[2‐thio‐3‐aminomethyl‐5‐tert‐butyl‐benzyl]propane‐1,3‐diamine) to form dinuclear chromium(III) complexes has been examined. Reaction of Cr^IICl₂ with H₂L² in methanol in the presence of base followed by air‐oxidation afforded cis,cis‐[(L²)Cr^III₂(μ‐OH)(Cl)₂]⁺ ( 1a ) and trans,trans‐[(L²)Cr^III₂(μ‐OH)(Cl)₂]⁺ ( 1b ). Both compounds contain a confacial bioctahedral N₂ClCr^III(μ‐SR)₂(μ‐OH)Cr^IIIClN₂ core. The isomers differ in the mutual orientation of the coligands and the conformation of the supporting ligand. In 1a both Cl^? ligands are cis to the bridging OH function. In 1b they are in trans‐positions. Reaction of the hydroxo‐bridged complexes with HCl yielded the chloro‐bridged cations cis,cis‐[(L²)Cr^III₂(μ‐Cl)(Cl)₂]⁺ ( 2a ) and trans,trans‐[(L²)Cr^III₂(μ‐Cl)(Cl)₂]Cl ( 2b ), respectively. These bridge substitutions proceed with retention of the structures of the parent complexes 1a and 1b .     

Oxidative Addition von N‐Chlortriphenylphosphanimin an Phosphortrichlorid und Antimontrichlorid. Kristallstrukturen von (Cl3PNPPh3)2[PCl6][ClHCl],[SbCl4(HNPPh3)2][SbCl6] und [Sb(NPPh3)4][SbCl6]

Oxidative Addition of N‐chlorotriphenylphosphoraneimine onto Phosphorus(III) Chloride and Antimony(III) Chloride. Crystal Structures of (Cl₃PNPPh₃)₂[PCl₆][ClHCl], [SbCl₄(HNPPh₃)₂][SbCl₆], and [Sb(NPPh₃)₄][SbCl₆] Phosphorus(III) chloride reacts with N‐chlorotriphenylphosphoraneimine, ClNPPh₃, in CH₂Cl₂ solution strongly exothermically via oxidative addition to give (Cl₃PNPPh₃)₂[PCl₆][ClHCl] ( 1 ). As a by‐product, Ph₃PNP(O)Cl₂ can be obtained, which is formed from PCl₃ and ClNPPh₃ in the presence of POCl₃. In contrast to these results, antimony(III) chloride reacts with ClNPPh₃ in CH₂Cl₂ solution to give a mixture of the phosphoraneimine complex [SbCl₄(HNPPh₃)₂][SbCl₆] ( 2 ) and the phosphoraneiminato complex [Sb(NPPh₃)₄][SbCl₆] ( 3 ). The complexes 1 ‐ 3 were characterized by IR spectroscopy and by single crystal X‐ray determinations. 1 : Space group C2/c, Z = 4, lattice dimensions at 193 K: a = 3282.0(2), b = 798.7(1), c = 1926.1(2) pm, β = 107.96(1)°, R₁ = 0.0302. 1 contains [Cl₃PNPPh₃]⁺ cations with PN bond lengths of 152.5(2) and 160.9(2) pm, and a PNP bond angle of 140.5(1)°. 2 ·CH₂Cl₂: Space group , Z = 2, lattice dimensions at 193 K: a = 1031.2(1), b = 1448.3(2), c = 1811,4(2) pm, α = 70.96(1)°, β = 87.67(1)°, γ = 75.37(1)°, R₁ = 0.0713. 2 ·CH₂Cl₂ contains cations [SbCl₄(HNPPh₃)₂]⁺ with octahedrally coordinated Sb atom and the HNPPh₃ ligand molecules being in trans‐position. Sb–N bond lengths are 207.6(6) and 209.3(6) pm, PN bond lengths 162.3(7) and 160.8(7), which approximately corresponds with double bonds. 3 ·0.5CH₂Cl₂: Space group P4/n, Z = 2, lattice dimensions at 193 K: a = b = 1678.8(1), c = 1244.3(1) pm, R₁ = 0.0618. 3 ·0.5CH₂Cl₂ contains [Sb(NPPh₃)₄]⁺ cations with tetrahedrally coordinated Sb atom and short Sb–N bond lengths of 193.7(6) pm. The PN distances of the phosphoraneiminato ligands, (NPPh₃)^? with 156.5(6) pm, correspond with double bonds, the SbNP bond angles are 130.6(3)°.     

Palladium acetate complexes bearing chelating N-heterocyclic carbene (NHC) ligands: Synthesis and catalytic oxidative homocoupling of terminal alkynes

The imidazolium salts 1,1′-dibenzyl-3,3′-propylenediimidazolium dichloride and 1,1′-bis(1-naphthalenemethyl)-3,3′-propylenediimidazolium dichloride have been synthesized and transformed into the corresponding bis(NHC) ligands 1,1′-dibenzyl-3,3′-propylenediimidazol-2-ylidene (L₁) and 1,1′-bis(1-naphthalenemethyl)-3,3′-propylenediimidazol-2-ylidene (L₂) that have been employed to stabilize the Pd^II complexes PdCl₂(κ²-C,C-L₁) (2a) and PdCl₂(κ²-C,C-L₂) (2b). Both latter complexes together with their known homologous counterparts PdCl₂(κ²-C,C-L₃) (1a) (L₃ = 1,1′-dibenzyl-3,3′-ethylenediimidazol-2-ylidene) and PdCl₂(κ²-C,C-L₄) (1b) (L₄ = 1,1′-bis(1-naphthalenemethyl)-3,3′-ethylenediimidazol-2-ylidene) have been straightforwardly converted into the corresponding palladium acetate compounds Pd(κ¹-O-OAc)₂(κ²-C,C-L₃) (3a) (OAc = acetate), Pd(κ¹-O-OAc)₂(κ²-C,C-L₄) (3b), Pd(κ¹-O-OAc)₂(κ²-C,C-L₁) (4a), and Pd(κ¹-O-OAc)₂(κ²-C,C-L₂) (4b). In addition, the phosphanyl-NHC-modified palladium acetate complex Pd(κ¹-O-OAc)₂ (κ²-P,C-L₅) (6) (L₅ = 1-((2-diphenylphosphanyl)methylphenyl)-3-methyl-imidazol-2-ylidene) has been synthesized from corresponding palladium iodide complex PdI₂(κ²-P,C-L₅) (5). The reaction of the former complex with p-toluenesulfonic acid (p-TsOH) gave the corresponding bis-tosylate complex Pd(OTs)₂(κ²-P,C-L₅) (7). All new complexes have been characterized by multinuclear NMR spectroscopy and elemental analyses. In addition the solid-state structures of 1b·DMF, 2b·2DMF, 3a, 3b·DMF, 4a, 4b, and 6·CHCl₃·2H₂O have been determined by single crystal X-ray structure analyses. The palladium acetate complexes 3a/b, 4a/b, and 6 have been employed to catalyze the oxidative homocoupling reaction of terminal alkynes in acetonitrile chemoselectively yielding the corresponding 1,4-di-substituted 1,3-diyne in the presence of p-benzoquinone (BQ). The highest catalytic activity in the presence of BQ has been obtained with 6, while within the series of palladium-bis(NHC) complexes, 4b, featured with a n-propylene-bridge and the bulky N-1-naphthalenemethyl substituents, revealed as the most active compound. Hence, this latter precursor has been employed for analogous coupling reaction carried out in the presence of air pressure instead of BQ, yielding lower substrate conversion when compared to reaction performed in the presence of BQ. The important role of the ancillary ligand acetate in the course of the catalytic coupling reaction has been proved by variable-temperature NMR studies carried out with 6 and 7′ under catalytic reaction conditions.