共查询到20条相似文献,搜索用时 724 毫秒
1.
研究了钢杜热浸镀锌、铝及铝锌合金镀层的耐蚀性能,模拟大气腐蚀和海水腐蚀的条件,对各类镀层进行了NSS、ASS,曝气及浸泡试验,结合扫描电镜和俄歇电子能谱等表面分析手段,对三类镀层的耐蚀性进行了评定。 相似文献
2.
为了解工业副产品AF3F~(TM)替代萤石在炼钢生产中的冶金效果,针对两种化渣剂在冶金过程中的特定用途,分别进行熔渣熔化特性测试、铁水脱硫及钢水脱硫试验,对比两种化渣剂的化渣助熔及脱硫效果。试验对比发现,AF3F~(TM)相对于萤石球具有更加优良的冶金效果,能更好地降低石灰的熔点,与萤石球同为10%的配比时,可使石灰熔点低45℃;使用AF3F~(TM)作为化渣剂的炉次成渣更快、脱硫效果更好,同样试验环境下,达到相同的脱硫效果时,AF3F~(TM)能比萤石球节约至少20%的用量,可减少含氟废物的排放约10%左右;从资源、成本、环境、冶金效果等角度综合分析其在冶金行业中具有推广应用价值。 相似文献
3.
4.
5.
6.
轻质矽砖是近年来发展的一种新型隔热材料,在1941年,苏联耐火材料研究院即已研究成功。但是,大规模地生产及使用还是近几年的事。使用实践证明,轻质矽砖具有广泛的用途:它可以直接作为加热炉炉衬,顶盖,在不宜于使用轻质粘土砖地方可以使用轻质矽砖。在加热炉炉衬中使用轻质矽砖可以缩短加热期,降低35%的燃料消耗量(与粘土砖比较)。耐火材料工业窑炉炉顶部位使用轻质矽砖,可延 相似文献
7.
8.
以南京市TM遥感影像为例,利用HOT最优云监测变换方法对遥感影像进行薄云的去除,然后通过分析典型地物在不同波段的光谱特征,引入多波段组合(TM2+TM3)/(TM4+TM5)并辅以单波段(TM5)阈值的方法对南京市的水体信息进行了提取. 相似文献
9.
以宝钢分公司五冷轧退火酸洗常化(APL)机组TM系列变频器与上位V系列S3 PLC控制器通讯实现为例,重点对TM系列传动装置及V系列S3 PLC控制器装置通讯原理、硬件实现、软件组态设定及通讯定义进行说明.采用所论及的方法和技术,实现了东芝V系列S3控制器与TM系列变频传动装置的控制. 相似文献
10.
从不同角度对复合纳米级微孔隔热材料的优势进行阐述。相比于传统隔热材料,这种新型材料导热系数低,隔热效果好,节能效益可观,综合应用价值明显。经过实例分析表明,这种隔热材料在工业炉上的应用效果显著,普适性强,前景广阔。 相似文献
11.
原复合反射绝热板热导率系数值较大,钢包包壳温度较高,在使用过程中钢水温度损失大;而新型气凝胶绝热板是以纳米材料为主,主要材质为SiO2气凝胶,具有导热系数低、耐高温、密度小、抗压强度高等优越性能。某钢厂120 t钢包保温层用新型气凝胶绝热板替代原复合反射绝热板的效果表明,钢包包壳表面温度平均下降59~73 ℃;通过两种钢包包壳温度计算得出,在生产中,钢包每周转一次,可节省钢水温损9.88 ℃,钢水温降速率降低0.11 ℃/min;通过实测LF炉软吹结束钢水温度及铸机开浇时钢水温度,钢水温降速率降低0.12~0.13 ℃/min,实际钢水温降速率与钢包包壳节省温度计算的钢水温降速率基本吻合,成本下降2.7元/t(钢),取得了良好的试验效果,为新型气凝胶绝热板在钢厂其他保温设备上的应用提供了重要的参考价值。 相似文献
12.
蓄热式加热炉和钢包永久衬耐火材料应用研究 总被引:1,自引:0,他引:1
介绍一种新型浇注料——低水泥粒状耐火纤维浇注料,把重质耐火浇注料和轻质隔热浇注料的优点集于一体,既高强度耐高温又低导热率较低容重,适用于蓄热式加热炉和钢包永久衬耐火隔热的综合要求。 相似文献
13.
以U75V高速重轨钢为例,研究了加热保温处理对MnS夹杂的影响。采用高温共聚焦激光显微镜分别对铸坯和钢轨中MnS夹杂在连续升温过程中的行为进行了动态原位观察,结果表明MnS夹杂在600~870℃发生球化,在1180℃左右时, MnS夹杂开始发生固溶。根据原位观察结果,在电阻炉中进行了加热保温处理实验。试验结果表明,830℃保温后,MnS夹杂尺寸只是略有减少,长宽比降低。在1180℃保温后,大型MnS夹杂数量明显减少,小尺寸MnS数量增多,且随保温时间的延长,夹杂物数量减少,长宽比进一步降低。通过加热保温处理可以改善重轨钢中长条状大型MnS夹杂。 相似文献
14.
15.
16.
Role of Insulation Effectiveness on Fire Resistance of Steel Structures under Extreme Loading Events
Fire performance of steel structures is highly dependent on the effectiveness of applied fire insulation. However, insulation materials are susceptible to damage under extreme loading events. A state-of-the-art review on the role of insulation damage on fire resistance of steel structures is presented. Parametric studies on a six-story steel-framed building were carried out to illustrate the effect of insulation damage on fire response of a steel structure. In the analysis, realistic fire scenarios, loading, and failure criteria were taken into consideration. Analysis results indicate that the fire resistance of a steel-framed structure is significantly influenced by the extent of insulation loss, type of fire scenario, and level of lateral load. Insulation damage causes faster deterioration in the structural response of framed buildings under the combined effect of fire and lateral loading. The need for accounting for any insulation damage, arising under extreme loading events, in fire design of steel-framed structures is highlighted, and a performance-based design strategy incorporating fire resistance analysis is discussed. 相似文献
17.
从热轧1#加热炉压下梁钢结构变形、炉顶耐火材料脱落和炉顶表面温度偏高的现状入手,分析造成现状的主要原因.根据原因分析,提出了更换部分钢结构、改进承重方式、改进安装位置与结构、耐火材料改进、绝热材料改进等五项具体措施.通过措施的落实降低了1#加热炉炉顶表面温度,延长了炉顶钢结构的使用寿命,消除了1#加热炉的设备隐患,提高了1#加热炉的生产能力. 相似文献
18.
轻钢主要指轻型冷弯薄壁型钢、轻型焊接和高频焊接型钢、薄壁钢板、薄壁钢管、轻型热轧型钢及以上各型材的组合,其具有强度高和自重轻的特点,能充分发挥其材料特性并带来施工便利的建筑材料。轻钢 -轻质混凝土结构具有结构自重轻、抗震性能好、施工速度快、劳动强度低等优点,目前行业内常见的轻钢墙体有空心墙体和实心墙体两种,空心墙体常采用 OSB 板 ( 欧松板)或水泥板加保温隔音棉,实心墙体多采用现浇轻质混凝土。实心墙体为代表的轻钢 - 轻质混凝土结构,为了便于后期自密实轻质混凝土灌浆施工,在轻钢结构龙骨架安装完成后,需要在墙体两面挂上免拆模板钢丝网,将事先按设计密度搅拌好的轻质混凝土进行墙体浇筑。银川市三沙源防沙治沙学院体育看台工程中,台阶就采用轻钢 - 轻质混凝土结构,与传统的混凝土结构相比,降低了看台板的厚度和配筋率,由于自重减小而基础尺寸也相应减小,项目实施后效果良好。 相似文献
19.
20.
《Baosteel Technical Research》2010,(Z1):53
The major applications of electrical steel(ES) sheets are motors,transformers,etc.In recent years, the raise of crude oil price and increasing environmental consciousness trigger the demands for saving energy and reducing CO2 emissions,which greatly accelerate the development of high quality ES sheets.To meet the quality requirements of high efficiency motors and transformers,high grade ES sheets with high flux density are continuously developed and introduced to the market.Meanwhile,the price competition and quality improvement of general grades are important for the lower end application.The iron loss of 50CS1300(50A1300) is significantly reduced by controlling some key parameters.Other than the normal grade,the highest grades of nonoriented (NO) ES are successfully developed recently.And all specifications of 0.50 and 0.35 mm among JIS C 2552 specification could be provided by CSC.As to the insulation coating development,the Cr-free insulation coating has been introduced to the market due to the environmental concern,and has been enormously adopted in Taiwan market.Furthermore,the thicker insulation coating technology has been successfully developed for specific wind power generator application.The newly developed products and quality improvements of electrical steel sheets in China Steel are introduced in this paper. 相似文献