Poly(trimethylene terephthalate) nanocomposite fibers by in situ intercalation polymerization: thermo-mechanical properties and morphology (I)

A series of poly(trimethylene terephthalate) (PTT) nanocomposites, containing an organically modified montmorillonite (C₁₂PPh-MMT), were prepared by in situ intercalation polymerization of dimethyl terephthalate (DMT) and 1,3-propanediol (PDO). The PTT nanocomposites were melt-spun at different organoclay contents and different draw ratios (DRs) to produce monofilaments. The nanocomposites were characterized by X-ray diffraction, electron microscopy, universal tensile testing, differential scanning calorimetry and thermogravimetric analysis. Some of the clay particles appeared well dispersed within the PTT matrix, while others were found to agglomerate with a size greater than 10 nm. The addition of a small amount of C₁₂PPh-MMT was sufficient to improve the thermo-mechanical properties of the PTT hybrid fibers. Both the thermal stability and the tensile strength increased with increasing clay content at DR=1. As the DR was increased from 1 to 9, the ultimate tensile strength of the hybrid fibers decreased, while the initial modulus remained constant.     

Synthesis of Poly(butylene terephthalate) Nanocomposite by <Emphasis Type="Italic">In-situ</Emphasis> Interlayer Polymerization and Characterization of Its Fiber (I)

Summary The nanocomposites with poly(butylene terephthalate)(PBT) incorporated between the montmorillonite (MMT) layers were synthesized from dimethyl terephthalate (DMT) and butane diol (BD) by using an in-situ interlayer polymerization approach. The PBT nanocomposites were melt spun at different organoclay contents to produce monofilaments. The existence of clay layers in the PBT was confirmed by using X-ray diffraction and transmission electron microscopy, and those layers were found to be disperse on a nanometer scale. The thermal properties of the layered structures of the hybrids were found to be more stable than those of pure PBT. These improved thermal properties of the nanocomposites might arise from an extensive and strongly bonded interface between the organic and the inorganic components. Moreover, the addition of only a small amount of organoclay was enough to improve the mechanical properties of the PBT hybrid fibers.     

Poly(ethylene terephthalate) nanocomposites by in situ interlayer polymerization: the thermo-mechanical properties and morphology of the hybrid fibers

Nanocomposites of poly(ethylene terephthalate) (PET) with C₁₂PPh-MMT as an organoclay were synthesized by using the in situ interlayer polymerization approach. The PET nanocomposites were melt-spun at different organoclay contents and different draw ratios to produce monofilaments. The thermo-mechanical properties and the morphologies of the PET nanocomposites were examined by using a differential scanning calorimeter, a thermogravimetric analyzer, a wide angle X-ray diffactometer, scanning and transmission electron microscopes, and a universal tensile machine. Some of the clay particles were well dispersed in the PET matrix, and some of them were agglomerated at a size level of greater than approximately 10 nm. The thermal stability and the tensile mechanical properties of the PET hybrid fibers increased with increasing clay content at a DR=1. However, the values of the ultimate tensile strength and the initial modulus of the hybrid fibers decreased markedly with increasing DR from 1 to 16.     

Poly(ethylene terephthalate) nanocomposite fibers by in situ polymerization: The thermomechanical properties and morphology

A series of nanocomposites of poly(ethylene terephthalate) (PET) with the organoclay dodecyltriphenylphosphonium‐mica (C₁₂PPh‐mica) were synthesized with the in situ polymerization method. PET hybrid fibers with various organoclay concentrations were melt‐spun at various draw ratios (DRs) to produce monofilaments. The thermomechanical properties and morphologies of the PET hybrid fibers were characterized with differential scanning calorimetry, thermogravimetric analysis, wide‐angle X‐ray diffraction, electron microscopy, and universal tensile analysis. The organoclay was intercalated in the polymer matrix at all magnification levels, and some of the agglomerated organoclay layers were greater than 50 nm thick. The thermal stabilities and initial tensile moduli of the hybrid fibers increased with an increasing clay content for DR = 1. For DR = 1, the ultimate tensile strengths of the PET hybrid fibers increased with the addition of clay up to a critical clay loading and then decreased above that critical concentration. However, the tensile mechanical properties of the hybrid fibers did not improve with increasing DR. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2009–2016, 2005     

Poly(trimethylene terephthalate) nanocomposite fibers comprising different organoclays: Thermomechanical properties and morphology

Poly(trimethylene terephthalate) (PTT) nano composites were synthesized by in situ polymerization at high temperature with two thermally stable organoclays: 1,2‐dimethylhexadecylimidazolium‐montmorillonite (IMD‐MMT) and dodecyltriphenyl phosphonium‐MMT (C₁₂PPh‐MMT). PTT hybrid fibers with various organoclay contents were melt‐spun at various draw ratios (DRs) to produce monofilaments. The thermomechanical properties and morphologies of the PTT hybrid fibers were characterized using differential scanning calorimetry, thermogravimetric analysis, wide‐angle X‐ray diffraction, electron microscopy, and mechanical tensile properties analysis. The nanostructure of the hybrid fibers was observed by both scanning and transmission electron microscopy, which showed that the clay layers were well dispersed into the matrix polymer, although some clusters or agglomerated particles were also detected. Unlike the hybrids containing IMD‐MMT, the clay layers of the C₁₂PPh‐MMT hybrid fiber were more dispersed into the matrix polymer. The thermal stability and tensile properties of the hybrid fibers increased with increasing clay content for DR = 1. However, as DR increased from 1 to 9 the ultimate strength and initial modulus of the hybrid fibers with IMD‐MMT increased slightly whereas those of C₁₂PPh‐MMT hybrid fibers decreased slightly. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4535–4545, 2006     

Nanocomposite fibers of poly(ethylene terephthalate) with montmorillonite and mica: thermomechanical properties and morphology

The thermal stabilities, mechanical properties, and morphologies of nanocomposites of poly(ethylene terephthalate) (PET) with two different organoclays are compared. Dodecyltriphenylphosphonium‐montmorillonite (C₁₂PPh‐MMT) and dodecyltriphenylphosphonium‐mica (C₁₂PPh‐Mica) were used as reinforcing fillers in the fabrication of PET hybrid fibers. The variations of their properties with organoclay content in the polymer matrix and draw ratio (DR) are discussed. Transmission electron microscopy micrographs show that some of the clay layers are dispersed homogeneously within the polymer matrix on the nanoscale, although some clay particles are agglomerated. It was also found that the addition of only a small amount of organoclay is enough to improve the thermal stabilities and mechanical properties of the PET hybrid fibers. Even polymers with low organoclay contents (1–5 wt%) were found to exhibit much higher strength and modulus values than pure PET. In the case of C₁₂PPh‐MMT/PET, the values of the tensile mechanical properties of the hybrid fibers were found to decrease linearly with increases in DR from 1 to 16. However, the tensile mechanical properties of the C₁₂PPh‐Mica hybrid fibers were found to be independent of DR. Copyright © 2006 Society of Chemical Industry     

Effect of blending sequence on the morphologies of poly(butylene terephthalate)/epoxy/clay nanocomposites by a rheological approach

Epoxy resin was used as a compatilizer to prepare poly(butylene terephthalate)/clay nanocomposites via melt intercalation. Three different mixing sequences were attempted in the present work: (1) to mix poly(butylene terephthalate) (PBT), epoxy, and organoclay in one step; (2) first to mix epoxy and organoclay, and then mix it with PBT; (3) to prepare PBT/organoclay hybrid first, and then mix it with epoxy to get the final nanocomposites. The results from X‐ray diffraction (XRD) reveal that all these hybrids present an intercalated structure. However, it can be observed that there are distinct differences in the amount and average size of clay tactoids dispersed in those hybrids from the transmission electron microscope (TEM) photographs, which are further confirmed successfully by the rheological measurements. On the basis of the strain overshoot intensity and the low‐frequency solid‐like response level in the small amplitude oscillatory shear (SAOS) measurements, it can be concluded that the blending sequence (2) is the best way to obtain a nice dispersion of clay in the matrix, forming a percolated tactoids network with highest density and intensity. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 340–346, 2006     

Polyester nanocomposite fibers: comparison of their properties with poly(ethylene terephthalate) and poly(trimethylene terephthalate) (II)

Summary Two polyester nanocomposites were synthesized, one with poly(ethylene terephthalate) (PET) and the other with poly(trimethylene terephthalate) (PTT), by using organoclay. The in-situ interlayer polymerization method was used to disperse the organoclay in polyesters at different organoclay contents and at different draw ratios to produce monofilaments. The thermal stability and tensile mechanical properties increased with increasing organoclay content at a DR=1 . However, the values of the tensile mechanical properties of the hybrid fibers decreased with increasing DR. The reinforcing effects of the organoclay of the PET hybrid fibers were higher than those of the PTT hybrid fibers.     

Poly(ethylene terephthalate) nanocomposite fibers with new organomica via in situ intercalation

Poly(ethylene terephthalate) (PET) nanocomposites with a newly synthesized organomica (C₁₆BIMD‐Mica) were obtained by using the in situ interlayer polycondensation of ethylene glycol with dimethylterephthalic acid. The PET hybrids were melt‐spun to produce monofilaments with various organoclay contents and draw ratios. The thermomechanical properties and morphologies of the PET hybrid fibers were determined using differential scanning calorimetry, thermogravimetric analysis, wide angle X‐ray diffraction, electron microscopy (SEM and TEM), and a universal tensile machine. The XRD analyses and TEM micrographs showed that the levels of exfoliation and intercalation could be controlled by varying the clay content. The thermomechanical properties of the PET hybrid fibers were found to be better than those of pure PET fibers. POLYM. ENG. SCI., 47:1820–1826, 2007. © 2007 Society of Plastics Engineers     

Effect of blending sequence on the microstructure and properties of PBT/EVA‐g‐MAH/organoclay ternary nanocomposites

Ternary nanocomposites based on poly(butylene terephthalate) (PBT), maleic anhydride grafted poly(ethylene‐co‐vinyl acetate) (EVA‐g‐MAH), and organically modified montmorllonite (organoclays) were prepared through four different blending sequences in a Haake rheocord mixer: (1) To blend PBT, EVA‐g‐MAH and organoclays in one step; (2) First to prepare EVA‐g‐MAH/organoclay nanocomposite, then mix it with PBT to get the final nanocomposite; (3) To mix PBT with organoclays first, then the PBT/organoclay nanocomposite with EVA‐g‐MAH. (4) To mix organoclays with the PBT/EVA‐g‐MAH blend. The microstructure of the PBT/EVA‐g‐MAH/organoclay ternary hybrids was characterized by X‐ray diffraction (XRD) and transmission electron microscopy (TEM). It was found that the blending sequence significantly influences the microstructure of PBT/EVA‐g‐MAH/organoclay ternary hybrids and the dispersion behavior of the organoclays in the polymer matrix. Tensile and impact properties of the hybrids were also studied. The results showed that the mixing sequence (2) gives the best tensile and impact strength due to its fine “sea‐island” morphology of PBT/EVA‐g‐MAH blend and good dispersion of the organoclays in the continuous PBT matrix.     

Natural rubber/poly(ethylene‐co‐vinyl acetate)‐blend‐based nanocomposites

Natural rubber (NR)/poly(ethylene‐co‐vinyl acetate) (EVA) blend–clay nanocomposites were prepared and characterized. The blend nanocomposites were prepared through the melt mixing of NR/EVA in a ratio of 40/60 with various amounts of organoclay with an internal mixer followed by compression molding. X‐ray diffraction patterns revealed that the nanocomposites formed were intercalated. The formation of the intercalated nanocomposites was also indicated by transmission electron microscopy. Scanning electron microscopy, used to study the fractured surface morphology, showed that the distribution of the organoclay in the polymer matrix was homogeneous. The tensile modulus of the nanocomposites increased with an increase in the organoclay content. However, an increase in the organoclay content up to 5 phr did not affect the tensile strength, but the organoclay reduced this property when it was increased further. This study also indicated that a low silicate content dispersed in the blend matrix was capable of increasing the storage modulus of the material. The addition of the organoclay also increased the decomposition temperature of the NR/EVA blends. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 353–362, 2006     

Effect of compatibilizer and organoclay content on structure,thermal, and mechanical properties of poly(butylene succinate)/(Ethylene acrylic acid)/Organoclay nanocomposites

Poly(butylene succinate) (PBS)/(ethylene acrylic acid) (EAA)/organoclay nanocomposites were prepared by using the melt intercalation technique. EAA was used as compatibilizer and organoclay was used as inorganic filler. X‐ray diffraction and transmission electron microscopy results indicated the addition of compatibilizer led to a large increase in basal spacing of nanocomposites and better overall dispersion of organoclay in the PBS matrix. However, the basal spacing was found to be invariant as the organoclay content increased. The differential scanning calorimetry analyses revealed that the incorporation of the organoclay and EAA and the variation of organoclay content altered the melting behavior and crystallization properties of PBS. Storage and loss modulus of virgin matrix increased with the incorporation of organoclay and EAA, and a maximum for the nanocomposite with 9 wt% organoclay. Moreover, the glass transition temperatures also increased for the various organoclay‐containing samples. Mechanical properties showed an increase with the incorporation of organoclay and EAA. The 5 wt% organoclay‐filled PBS gave the highest tensile strength and notched Izod impact strength among all the composites. Further increments in organoclay loading reduced the tensile strength and notched impact strength of nanocomposites, which was thought to be the result of agglomeration. However, increments in clay loading enhanced the flexural strength and flexural modulus of nanocomposites, with a maximum at 9 wt% organoclay. J. VINYL ADDIT. TECHNOL., 23:219–227, 2017. © 2015 Society of Plastics Engineers     

Synthesis and characterization of poly(butylene terephthalate) nanocomposite fibers: Thermo‐mechanical properties and morphology

Nanocomposites of poly(butylene terephthalate) (PBT) with the organoclay C₁₂PPh‐MMT were prepared using in situ intercalation polymerization. Hybrids with various organoclay contents were processed for fiber spinning to examine their thermal behavior, tensile mechanical properties, and morphologies for various draw ratios (DRs). The thermal properties (T_g, T_m, and T_Dⁱ) of the hybrid fibers were found to be better than those of pure PBT fibers and were unchanged by variation of the organoclay loading up to 2 wt %. However, these thermal properties remained unchanged for DRs ranging from 1 to 18. Most clay layers were dispersed homogeneously in the matrix polymer, although some clusters were also detected. The tensile properties of the hybrid fibers increased gradually with increasing C₁₂PPh‐MMT content at DR = 1. However, the ultimate strengths and initial moduli of the hybrid fibers decreased markedly with increasing DR. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1247–1254, 2006     

Comparison of Thermomechanical Properties and Morphologies of Polyester Nanocomposite Fibers: PBT,PET, and PTT

Nanocomposites of three different polyesters with dodecyltriphenyl-phosphonium-montmorillonite (C₁₂PPh-MMT) organoclay are compared with respect to their thermal properties, mechanical properties, and morphologies. Poly(butylene terephthalate) (PBT), poly(ethylene terephthalate) (PET), and poly(trimethylene terephthalate) (PTT) were used as matrix polymers in the fabrication of polyester nanocomposite fibers. The variations in their properties with respect to both the organoclay content in the polymer matrix and the draw ratio (DR) are discussed. Transmission electron microscopy (TEM) micrographs show that some of the clay layers are dispersed homogeneously within the polymer matrix on the nanoscale, although some clay particles are agglomerated. The results additionally show that the addition of only a small amount of organoclay is enough to improve the thermal stabilities and mechanical properties of the polyester nanocomposite fibers.     

The critical organic modifier aliphatic tail length for the formation of poly(methyl methacrylate)-montmorillonite nanocomposites

In this article, we report the influence of organic modifier structure (alkyl chain length C8-C20, single vs ditallow) and thereby, the effect of hydrophobicity on the structure, thermal and mechanical properties of poly(methyl methacrylate) (PMMA)-clay hybrids. Melt processed PMMA-clay hybrids were characterized using wide-angle X-ray diffraction, transmission electron microscopy, and differential scanning calorimetry. The organoclays having an alkyl chain length of more than 12 CH₂ groups resulted in the formation of nanocomposites. The glass transition temperature (T_g) of PMMA increased in the presence of clay. The mean-field lattice model was used to predict the free energy for nanocomposite formation, which showed a reasonable match with the experimental results and provided a general guideline for the proper selection of polymer and organoclay (ie, organic modifier) to obtain nanocomposite. Tensile modulus showed maximum improvement of 58% for the nanocomposites compared to 9% improvement for the composites. Tensile modulus increased with increases in the alkyl chain length of the organic modifier and clay loading. The level of improvement for the tensile properties of nanocomposites prepared from primary and secondary ammonium-modified clay is the same as that obtained with the commercial organoclays.     

Mechanical properties and failure surface morphology of amine‐cured epoxy/clay nanocomposites

The tensile and impact properties of amine‐cured diglycidyl ether of bisphenol A based nanocomposites reinforced by organomontmorillonite clay nanoplatelets are reported. The sonication processing scheme involved the sonication of the constituent materials in a solvent followed by solvent extraction to generate nanocomposites with homogeneous dispersions of the organoclay nanoplatelets. The microstructure of the clay nanoplatelets in the nanocomposites was observed with transmission electron microscopy, and the clay nanoplatelets were well dispersed and were intercalated and exfoliated. The tensile modulus of epoxy at room temperature, which was above the glass‐transition temperature of the nanocomposites, increased approximately 50% with the addition of 10 wt % (6.0 vol %) clay nanoplatelets. The reinforcing effect of the organoclay nanoplatelets was examined with respect to the Tandon–Weng and Halpin–Tsai models. The tensile strength was improved only when 2.5 wt % clay nanoplatelets were added. The Izod impact strength decreased with increasing clay content. The failure surfaces of the nanocomposites were observed with environmental scanning electron microscopy and confocal laser scanning microscopy. The roughness of the failure surface was correlated with the tensile strength. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 281–287, 2005     

Organoclay Filled Natural Rubber Nanocomposites: The Effects of Filler Loading

Organoclay filled natural rubber (NR) nanocomposites were prepared using a laboratory two-roll mill. The effect of organoclay loading up to 10 phr was studied. The vulcanized nanocomposites were subjected to mechanical, thermal, and swelling tests. The results indicated that the tensile strength and elongation at break reached optimum at 4 phr of organoclay loading, and the incorporation of organoclay increased the tensile modulus and hardness of NR nanocomposites. The thermal degradation was shifted to a higher temperature and the weight loss decreased with incorporation of organoclay. Transmission electron microscopy (TEM) and X-ray diffraction (XRD) were employed to characterize the microstructure of NR nanocomposites. Results from TEM and XRD show the formation of intercalated and exfoliated individual silicate layers of organoclay filled NR nanocomposites particularly at low filler loading (< 4 phr).     

Particulate reinforced PC/PBT composites. II. Effect of nano‐clay particles on dimensional stability and structure–property relationships

The effect of organoclay loading and surface treatment on the dimensional stability, structure–property relationships, and rheological behavior of nanocomposites consisting of polycarbonate (PC), poly[butylene terephyhalate] (PBT), and nano‐clay was investigated at various clay loadings and with various surface modifiers for the nano‐clay particles. It was found that by using an organoclay formed with a polar amine compound that contained two hydroxyl end groups as opposed to nano‐talc, the flexural strength and tensile toughness of the nanocomposites increased by 12 and 27%, respectively, at a particle loading of 1 wt%, while maintaining the flexural modulus of the nanofilled PC/PBT blends. The flexural and tensile modulus of the nanocomposites increased with an increase in particle loading even though the viscosity was reduced due to a loss of molecular weight of the PC/PBT and/or an increase in the compability of the interface between the PC and PBT phase, which varied with organoclay structure. Possible loss of the molecular weight of the PC/PBT matrix was supported by a significant reduction in the storage modulus and complex viscosity at high frequencies of the composites generated with nano‐clay relative to that of the unfilled matrix. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers.     

Preparation of poly(ethylene terephthalate) nanocomposite fibers incorporating a thermally stable organoclay

Summary A series of poly(ethylene terephthalate) (PET) nanocomposites containing organically-modified mica (HB-Mica) were prepared by in-situ interlayer polymerization of dimethyl terephthalate and ethylene glycol. The PET nanocomposites, which contained organoclay loadings of 0 to 2 wt %, were melt-spun to produce monofilaments with various draw ratios. Some of the clay particles appeared well dispersed within the PET matrix, while others were found to form agglomerates with sizes greater than 20 nm. The addition of a small amount of organoclay was sufficient to improve the thermo-mechanical properties of the PET hybrid fibers. Both the thermal stability and the mechanical tensile properties increased with increasing clay content for draw ratios of 1–16.     

Poly(butylene terephthalate)–clay nanocomposites prepared by melt intercalation: morphology and thermomechanical properties

Nanocomposites based on poly(butylene terephthalate) (PBT) and an organoclay (Cloisite 30B) were prepared by melt blending using a twin‐screw extruder. Two kinds of PBTs, ie PBT‐A and PBT‐B, with different inherent viscosities (η_inh), were used for this study (η_inh of PBT‐A and PBT‐B were 0.74 and 1.48, respectively). Dispersion of the clay layers in the PBT nanocomposites was characterized by using X‐ray diffraction (XRD) and transmission electron microscopy (TEM). Tensile and dynamic mechanical properties and non‐isothermal crystallization temperatures of the nanocomposites were also examined. Nanocomposites based on the higher‐viscosity PBT (PBT‐B) showed a higher degree of exfoliation of the clay and a higher reinforcing effect when compared to the composites based on the lower‐viscosity PBT (PBT‐A). The clay nanolayers dispersed in PBT matrices lead to increases in the non‐isothermal crystallization temperatures of the PBTs, with such increases being more significant for the PBT‐B nanocomposites than for the PBT‐A nanoocomposites. Copyright © 2004 Society of Chemical Industry