Morphology and deformation behavior of polymer blends made of poly(styrene-co-styrenesulfonic acid) and poly(methyl methacrylate-co-4-vinylpyridine)

The effect of a small amount of ionic groups (interactions) on the morphology and deformation behavior of stoichiometric blends made of poly(styrene-co-styrenesulfonic acid) (SPS) and poly(methyl methacrylate-co-4-vinylpyridine) (MVP) was investigated by Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). FTIR data revealed that intermolecular ion-ion interactions were formed between SPS and MVP polymers, arising from proton transfer from sulfonic acid groups to pyridine groups upon blending. TEM observations show that the morphology of the blends changes from macroscopic phase separation to microscopic phase separation, and to miscibility, with increasing ion content of the blends from 0 to 6 mol%. Correspondingly, deformation behavior of the blends changes from crazing only, to curved and branched crazing, and to crazing plus shear deformation. Such changes in deformation mode can be understood as arising from the morphological changes and the increase of ‘effective’ strand density due to the formation of ionic cross-links in the blends.     

Synergistic enhancement in mechanical properties and microstructure of homoblends made of poly(styrene-co-styrenesulfonic acid) and poly(styrene-co-4-vinylpyridine)

Bulk mechanical properties and microstructure of a model blend (homoblend), made of poly(styrene-co-styrenesulfonic acid) (SPS) and poly(styrene-co-4-vinylpyridine) (SVP), were investigated by tensile measurements and modulated differential scanning calorimetry (MDSC). The mechanical properties exhibited synergism: tensile strength and toughness values of the blends were higher than those expected based on the rule of mixtures. The results were attributed to the formation of ionic cross-links due to intermolecular ion-ion interactions between pyridinium cations and sulfonate anions, which arose from proton transfer from sulfonic acid groups to pyridine groups upon blending. MDSC detected only one T_g for the SPS/SVP blends, indicating that the blends were unclustered. However, after annealing the blends at 150 °C for 24 h, two T_g's were detected, reflecting microphase separation (formation of a cluster phase and a matrix phase) due to aggregation of ionic groups during annealing.     

Polypyrrole nanocoatings of poly(styrene-co-methacrylic acid) particles

In this study the properties of polypyrrole (PPy) nanocoating over poly(styrene-co-methacrylic acid) (PS-MAA) particles were investigated. Monodisperse PS-MAA templates were obtained by free surfactant emulsion polymerization. The addition of methacrylic acid into the monomer feed mixture reduced particle size, ionic charge and hydrophobicity of the template surface. Correlations between template sizes and compositions, PPy confinement (granularity, shell size, etc.) and electrical conductivity, σ, are discussed. After dissolving the PPy/PS-MAA composites in tetrahydrofurane, PPy void spheres are obtained proving the core-shell nature of the coated particles. Bare styrene templates show densely packed PPy coatings and electrical conductivities near 7 S cm⁻¹ at high PPy loadings; on the contrary, at the same PPy mass percentage, the richer methacrylic acid particles show low packed PPy grains and conductivities that fall to 0.8 S cm⁻¹. In core-shell particles the PPy mass per unit area, Γ, is the key parameter which determines the insulator-conductor transition for any particle size. The conductivity values of PPy/PS-MAA composites follow a percolation law: σ∝t(Γ−Γc), with a critical threshold Γ_c=(0.262 ± 0.002)×10⁻⁶ g cm⁻². The critical exponent obtained t = 1.98 ± 0.07 agrees with the predicted value t = 2.0 for three-dimensional lattices of random resistors.     

Surface quantitative characterization of poly(styrene-co-4-vinyl phenol)/poly(styrene-co-4-vinyl pyridine) blends with controlled hydrogen bonding interactions

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) was used to quantitatively correlate to the surface chemical composition determined from XPS in poly(styrene-co-4-vinyl phenol) (STVPh)/poly(styrene-co-4-vinyl pyridine) (STVPy) blends or complexes when the hydroxyl contents in STVPh copolymers were gradually increased. It was found that different mixing thermodynamics such as immiscibility, miscibility and complexation has little effect on the quantitative analysis of surface concentrations in the blends or complexes using ToF-SIMS. In the positive spectra, the normalized intensities or relative peak intensities can both be used to quantitatively analyze the surface vinyl phenol (VPh), styrene and vinyl pyridine (VPy) concentrations when peaks at m/z=119, 120 are used for VPh, peaks at m/z=103, 105, 115 for styrene and peaks at m/z=80, 93, 106 for VPy monomer units. In the negative spectra, the normalized intensities of peaks characteristic of VPh monomer units (m/z=16, 17, 93) seems to be not affected by hydrogen bonding formation and can be used in quantitative analysis.     

Investigation on the early and late stage phase-separation dynamics of poly(methyl methacrylate)/poly(α-methyl styrene-co-acrylonitrile) blends through rheological and scattering functions

The phase-separation behavior of poly(methyl methacrylate)/poly(α-methyl styrene-co-acrylonitrile) (PMMA/α-MSAN) blends with two different compositions was studied by time-resolved small angle light scattering (SALS) in the spinodal decomposition (SD) regime from 160 to 210 °C. The rheological function (WLF-like equation) was introduced into the processing of light scattering data. It was found that the WLF-like equation was applicable to describe the temperature dependence of apparent diffusion coefficient D_app and the relaxation time τ of normalized scattering intensity (I(t)−I(0))/(I_m−I(0)) at the early stage of SD, as well as the relaxation time τ of maximum scattering intensity I_m and characteristic scattering vector q_m with I_m at the late stage of SD for PMMA/α-MSAN blends with two different compositions. This is in consistence with the phase-separation behavior of PMMA/SAN reported in our previous paper.     

Rheological studies of the poly(styrene-co-acrylonitrile) and poly(vinyl chloride-co-vinyl acetate) blends

The rheological studies of the poly(vinyl chloride-co-vinyl acetate) and poly(styrene-co-vinyl acetate) and poly(styrene-co-acrylonitrile) blends were performed by a Brabender Rheotron at three different temperatures and also at different shear rates. Flow curves of the blends at different temperatures were drawn. The flow behavior index and, also, zero-shear viscosity of the blends at different temperatures were determined. From the flow curves, it has been found that as shear stress increases, melt viscosity decreases at all temperatures, indicating that pseudoplastic behavior and experimental values lies above the line of the log-additivity value and below the line of the additivity rule of mixture. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 69: 2577–2583, 1998     

Polymer electrolytes based on a ternary miscible blend of poly(ethylene oxide), poly(bisphenol A-co-epichlorohydrin) and poly(vinyl ethyl ether)

Ternary blends of poly(ethylene oxide) (PEO), poly(bisphenol A-co-epichlorohydrin) (PBE) and poly(vinyl ethyl ether) (PVEE) were obtained as films and characterized by differential scanning calorimetry (DSC) and vibrational spectroscopy (FTIR). From the DSC results, phase diagrams for the ternary blends were determined, where the variation of the viscoelastic phase extent as a function of the polymers composition was determined. The DSC results also indicated miscibility of the system, exhibiting only one glass transition temperature (T_g) and decrease in the crystallinity of the system, as well as decrease in the crystallinity of PEO present in the blends. Vibrational spectroscopy (FTIR) provided information on the intermolecular interactions between the pairs PBE/PEO and PBE/PVEE, via hydrogen bond interaction. From the FTIR analyses, molecular model systems of equilibrium among the interacting structures were proposed as a molecular basis for the miscibility of the system.Polymer electrolytes based on the ternary blend containing 60/25/15 (PEO/PBE/PVEE) mass percent and lithium perchlorate (LiClO₄) were obtained and characterized by DSC, FTIR, optical microscopy and electrochemical impedance spectroscopy (EIS). Solid electrolytes containing up to 10 wt% LiClO₄ exhibited a single-phase behavior, evidenced by the DSC results. For these electrolytes, FTIR spectra indicated the formation of polymer-ion complexes, in which the cation (Li⁺) acts favoring the polymer-polymer miscibility. Electrolytes containing LiClO₄ higher than 10 wt% exhibit a multiple phase behavior, in which a PEO-rich, salt-containing phase is present in equilibrium with PBE or PVEE-rich phases. Maximum ionic conductivity at room temperature, for the electrolyte containing 20 wt% LiClO₄, reached 4.23 × 10⁻³ Ω⁻¹ cm⁻¹, while all samples exhibited conductivity of approximately 10⁻¹ Ω⁻¹ cm⁻¹ at 80 °C.     

Miscibility of copolycarbonate blends with poly(styrene-co-acrylonitrile) copolymer and their interaction energies

The phase behavior of dimethyl polycarbonate-tetramethyl polycarbonate (DMPC-TMPC) blends with poly(styrene-co-acrylonitrile) copolymers (SAN) and the interaction energies of binary pairs involved in blend has been explored. DMPC-TMPC copolycarbonates containing 60 wt% TMPC or more were formed miscible blends with SAN containing limited amounts of AN. The miscibility of copolycarbonate with SAN decreases as the DMPC content increases. The miscible blends showed the LCST-type phase behavior or did not phase separate until thermal degradation. The binary interaction energies involved in the miscible blends were calculated from the phase boundaries using the lattice-fluid theory combined with binary interaction model. The phenyl ring substitution with methyl groups did not lead to interactions that are favorable for miscibility with polyacrylonitrile (PAN). The interaction energies of the polycarbonates blends with SAN copolymers as a function of AN content were obtained. It was revealed that the incline of the number of methyl groups on the phenyl rings of bisphenol-A unit acts favorably for the miscibility with SAN copolymer when SAN contains less than about 30 wt% AN and shifts the most favorable interaction to the low AN content.     

Effect of clay on the morphology and properties of PMMA/poly(styrene-co-acrylonitrile)/clay nanocomposites prepared by melt mixing

Nanocomposites of blends of polymethylmethacrylate (PMMA) and poly(styrene-co-acrylonitrile) (SAN) with natural and organically modified montmorillonite clays (Cloisite^®25A and Cloisite^®15A) were prepared by melt mixing in a twin-screw extruder and the effect of clay on the phase separation morphology and physical properties of nanocomposites was investigated. Multi-pass samples were; those extruded once (one-pass), twice (two-pass) and three times (three-pass). Dispersion of clays in the matrix polymers was investigated using XRD and TEM. Interestingly enough, the clays were observed to be mainly located at the boundaries of PMMA and SAN for most of the nanocomposites. As the number of pass increased, the phase-separated domain size became larger for nanocomposites of PMMA/SAN containing PM, while nanocomposites with clay 25A or 15A showed less degree of growth in domain size in the TEM pictures. Viscosities of the continuous phase and separated domains, and the compatibilizing effect of clays were discussed as the probable explanations for these observations. These were supported by the rheological properties measurements, where the nanocomposites with clay 25A or 15A showed the higher complex viscosities than those of PM and also showed some shear thinning behavior. DSC and TGA analyses were also conducted.     

Dynamic mechanical properties of weakly clustered poly(styrene-co-sodium citraconate) ionomers

Summary The properties of poly(styrene-co-citraconate) ionomers were investigated dynamic mechanically. It was found that the loss tangent peak for the matrix glass transition decreased with increasing content of ionic units, while the loss tangent peak for the cluster glass transition was barely detectable. However, the ionic modulus values of the citraconate ionomers as a function of the amount of ionic units were comparable to those of well-clustered methacrylate ionomers. Thus, it was postulated that the ionic modulus was affected by both clustering due to the overlapping of regions of restricted mobility and strong physical cross-links originated from the ionic association of ca. 4 ion pairs. Received: 16 March 2001/Revised version: 25 April 2001/Accepted: 27 April 2001     

Fourier transform infrared spectroscopic studies of the poly(styrene-co-acrylonitrile) and poly (vinyl chloride-co-vinyl acetate) blends

The Fourier transform infrared (FTIR) spectroscopic studies of the poly-(styrene-co-acrylonitrile) (SAN) and poly(vinyl chloride-co-vinyl acetate) (VYHH) blends produced by different blending techniques, viz., solution blending, melt-blending, and also the co-precipitation methods of blending, were performed. In the case of miscible blend systems, substantial band shiftings took place, whereas immiscible blend systems showed slight or no band shifting. The miscible blends showed a substantial residual spectrum which was absent in the case of the immiscible system when a similar subtraction process was carried out. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 63: 991–1000, 1997     

The study of poly(styrene-co-p-(hexafluoro-2-hydroxylisopropyl)-α-methyl-styrene)/poly(propylene carbonate) blends by ESR spin probe and Raman

Different hydroxyl content poly(styrene-co-p-(hexafluoro-2-hydroxyisopropyl)-α-methylstyene) [PS(OH)] copolymers were synthesized and blends [noted for PP-X] with poly(propylene carbonate) [PPC] were prepared by casting from chloroform solution. The miscibility, micro heterogeneity and hydrogen bonding interaction of the component polymers were investigated by Differential Scanning Calorimetry (DSC), Electron Spin Resonance (ESR) spin probe method and Micro Raman spectroscopy. DSC results showed that the PP-2, PP-5, PP-8, PP-12 blends exhibited two distinct T_gs, indicating immiscibility, while the PP-20 and PP-27 blends were miscible with the existence of a single T_g. ESR results indicated that the probe molecule: Tempo couldn't give clear micro phase separation or miscibility information and thus was not sensitive to the investigated polymer blends system. On the contrary for all the blends spin probed with the probe molecules: Tempol and Tamine, two spectral components with different rates of motion: ‘fast’ and ‘slow’ motion were observed in different temperature range, which indicated the existence of micro heterogeneity on the molecular level; the more mobile PPC-rich micro phase and the more rigid PS(OH) rich micro phase. In addition, the scale of miscibility was progressively enhanced due to the increasing hydrogen bonding interaction between the hydroxyl in PS(OH) and the oxygen atoms in PPC. Meanwhile it was found that the degree of the probe molecule rotation detectable in the ESR spectrum was dependent on the polymer matrix rigidity and the strength of the hydrogen bonding between the probe molecule and the polymer matrix. Micro Raman substantiated the existence of the PS(OH)-rich micro phase and the PPC-rich micro phase. The hydrogen bonding strength between PS(OH) and PPC and the mixing level of the component polymers were increased gradually with the increase of hydroxyl content in the PS(OH) copolymer.     

Fracture behavior of poly(vinyl chloride)/methyl methacrylate/butadiene/styrene polymer blends

The fracture mode of poly(vinyl chloride)/methyl methacrylate/butadiene/styrene (PVC/MBS) polymer blends can change from ductile to brittle in accordance with the changes in shape of the test specimen or test conditions. Therefore, the mechanisms of impact energy absorption and the main cause of stress whitening are complicated. The following results on PVC/MBS blends were obtained by carrying out fracture experiments at different test speeds and temperatures:

• (1) The ductile/brittle fracture mode of the PVC and PVC/MBS blends can be explained by σ (the craze initiation stress)/σ_y (the shear yield initiation stress), which depends on the strain rates and temperature.
• (2) The fracture behavior of the PVC/MBS blends can be classified into the following types from the standpoints of fracture mode and whitening degree: Fracture I: ductile fracture without whitening; Fracture II: ductile fracture with whitening; and Fracture III: brittle fracture without whitening.
• (3) The following concepts can be estimated from the measurements of yield stress, specific gravity and SEM, TEM and visual observations. In Fracture I, shear yield occurs mainly. In Fracture II, both shear yield and crazing occur. In Fracture III, deformation of the rubber and local crazing occur.
• (4) The main cause of stress whitening in PVC/MBS blends is light scattering by cavities in the rubber particles.
• (5) In Fracture II, at first, crazes with cavities in the rubber particles occur. Then, shear yield occurs. Finally, crazes are healed by the heat, and only the cavities in the rubber remain.

     

Synthesis and characterization of temperature-responsive copolymer of PELGA modified poly(N-isopropylacrylamide)

Novel amphiphilic PELGA modified temperature-responsive copolymer, [(poly(methoxyethylene glycol)-co-poly(lactic acid)-co-poly-(glycolic acid))acrylate-co-poly(N-isopropylacrylamide)-co-poly(N-hydroxymethylacrylamide)] (PELGAA-co-PNIPAAm-co-PNHMAAm) was synthesized by incorporating PELGA as the amphiphilic moiety into poly(N-isopropylamide) with various LA/GA ratios. Polymers obtained were characterized by FT-IR, GPC, ¹H-NMR and DSC. The lower critical solution temperature (LCST) of the copolymeric nanoparticles was 40±0.6 °C, the critical aggregation concentration (CAC) was 18 mg L⁻¹, and reversible change in nanoparticle size related to temperature was fluctuated between 210±10 and 109±26 nm, while change in zeta potential of the nanoparticles was between −36±6 and −26±4 mV. The transmission electron microscopy (TEM) images of nanoparticles were also presented.     

Amphiphilic gradient poly(styrene-co-acrylic acid) copolymer prepared via nitroxide-mediated solution polymerization. Synthesis, characterization in aqueous solution and evaluation as emulsion polymerization stabilizer

A well-defined, amphiphilic poly(styrene-co-acrylic acid) copolymer was synthesized in a single step by nitroxide-mediated controlled free-radical copolymerization of styrene and acrylic acid, without protection of the acid groups: M_n=6500 g mol⁻¹, M_w/M_n=1.5 and a composition of F_AA=0.70±0.03 in acrylic acid. In addition to the good control over molar mass and molar mass distribution, the copolymer exhibited a narrow composition distribution with a slight gradient. Such copolymer was an efficient stabilizer for the emulsion polymerizations of styrene and of mixtures of methyl methacrylate and n-butyl acrylate, until 45 wt% solids. A low amount (typically 3-4 wt% based on the monomer(s)) was needed for a good stabilization. This is approximately a decade lower than the required amount of random, amphiphilic copolymers prepared via conventional free-radical polymerization. The performances were, however, below those of analogous diblock copolymers, but the great advantage is the very easy synthetic procedure.     

Monitoring of swelling of interpenetrating polymer network of polyethylene/poly(styrene-co-butylmethacrylate) (PE/P(S-co-BMA)) in toluene and cyclohexane using fluorescence spectroscopy

A real-time monitoring of excimer emission fluorescence probe di(1-pyrenemethyl)ether (DiPyM) was used for study swelling interpenetrating polymer network (IPN) consisting of polyethylene/poly(styrene-co-butylmethacrylate) (PE/P(S-co-BMA)) and containing different network density. DiPyM was introduced into IPN during polymerisation or was penetrated into blocks from toluene solution. The effect of solvent quality for swelling of IPN and density of IPN network was also studied. From steady-state measurements of monomer and excimer emission ratio (I_e/I_m), no difference was found between rate of swelling IPN with 0.5, 1 and 3 mol% of cross-linker. The rate of IPN swelling seems to be rather high. Some differences was found at real-time monitoring of excimer emission (λ_em=495 nm) of DiPyM measured during desorption of DiPyM from swelled IPN blocks. At higher content of cross-linker, a slower rate of DiPyM desorption from IPN matrix was observed.     

Effect of dehydrochlorination of PVC on miscibility and phase separation of binary and ternary blends of poly(vinyl chloride), poly(ethylene-co-vinyl acetate) and poly(styrene-co-acrylonitrile)

The enhancement of miscibility at the lower critical solution temperature (LCST) of the blends poly(vinyl chloride)/poly(ethylene-co-vinyl acetate) (PVC/EVA), poly(vinyl chloride)/poly(styrene-co-acrylonitrile) (PVC/SAN) and poly(vinyl chloride)/poly(ethylene-co-vinyl acetate)/poly(styrene-co-acrylonitrile) (PVC/EVA/SAN) was observed at the micron level. Such miscibility is attributed to the dehydrochlorination and formation of hydrogen bonds between blend components. However, macrolevel immiscibility of these blends heated to the LCST was observed. Such microdomain compatibility of these blends gives a synergistic character. Brittle-type failure observed for LCST samples testifies to the synergism in treated blends. ©1997 SCI     

Poly(styrene-b-isobutylene-b-styrene) block copolymer ionomers (BCPI) and BCPI/silicate nanocomposites. 2. NaBCPI sol-gel polymerization templates

Polystyrene (PS) blocks in poly(styrene-b-isobutylene-b-styrene) (PS-PIB-PS) block copolymers were partially sulfonated and the acid groups converted to Na⁺SO₃⁻ groups to create ionomers. Then, dimethylacetamide was used to selectively swell the ionic PS domains and the swollen films were exposed to sol-gel reactive tetraethylorthosilicate solutions. (EtO)_4−xSi(OH)_x monomers then permeated films so that sol-gel reactions occurred within/around the ionic PS domains. Environmental scanning electron microscopy/energy dispersive X-ray spectroscopy investigations showed that silicate structures can be incorporated within the interior of the ionomer films. Differential scanning calorimetry studies indicated that there is no variance in the PIB block T_g with respect to ionomer formation, or with respect to silicate loading of the ionomer at low levels, which suggests that the silicate component does not reside in the PIB phase. ²³Na solid state NMR spectroscopy detected isolated Na⁺SO₃⁻ groups as well as aggregated SO₃⁻Na⁺ ion pairs for ‘as cast’ and ‘dry’ non-silicate containing ionomer samples. In a hydrated sample, almost all Na⁺ ions were solvent-separated. AFM analysis showed that phase separation exists, but that the degree of order is significantly less than that for hybrids based on the corresponding benzyltrimethylammonium ionomer. This frustrated morphology was also seen in the results of small angle X-ray scattering experiments. Given the scale of organic/inorganic heterogeneity, these hybrids are properly classified as nanocomposites.     

Segregation morphology of poly(3-hydroxybutyrate)/poly(vinyl acetate) and poly(3-hydroxybutyrate-co-10% 3-hydroxyvalerate)/poly(vinyl acetate) blends as studied via small angle X-ray scattering

Segregation morphology of poly(3-hydroxybutyrate) (PHB)/poly(vinyl acetate) (PVAc) and poly(3-hydroxybutyrate-co-10% 3-hydroxyvalerate) (P(HB-co-10% HV)/PVAc blends crystallized at 70 °C have been investigated by means of small angle X-ray scattering (SAXS). Morphological parameters including the crystal thickness (l_c) and the amorphous layer thickness (l_a) were deduced from the one-dimensional correlation function (γ(z)). Blending with PVAc thickened the PHB crystals but not the P(HB-co-10% HV) crystals. On the basis of the composition variation of l_a, and the volume fraction of lamellar stacks (?_s) revealed that PHB/PVAc blends created the interlamellar segregation morphology when the weight fraction of PVAc (w_PVAc)≤0.2 and the interlamellar and interfibrillar segregation coexisted when w_PVAc>0.2, while P(HB-co-10% HV)/PVAc blends yielded the interfibrillar segregation morphology at all blend compositions. For both PHB/PVAc and P(HB-co-10% HV)/PVAc blends, the distance of PVAc segregation was promoted by increasing PVAc composition and the distance of PVAc segregation in P(HB-co-10% HV)/PVAc blends was greater than in PHB/PVAc at a given PVAc composition. The crystal growth rate played a key role in controlling the segregation of PVAc.     

Morphology evolution of a bisphenol A polycarbonate/poly (styrene-co-acrylonitrile) blend under shear and after shear cessation

The deformation, breakup and morphology relaxation of a commercially important polycarbonate (PC)/poly(styrene-co-acrylonitrile) (SAN) blend under and after steady shear flow have been studied in situ by combined phase contrast optical microscopy (PCOM), small angle light scattering (SALS) and rheometry. Under steady shear flow, the morphology of PC/SAN blends evolves via repeated deformation, breakup and finally string-like morphology. The data can be qualitatively interpreted with the mode-coupling renormalization group (MCRG) model. At high shear rate, shear-induced mixing effect is found to be saturated and no further shear-induced homogenization can be observed, which may be due to the fact that the experimental conditions (T, C) is far from the critical region and the shear suppression of concentration fluctuations is limited. Upon cessation of shear, different relaxation mechanisms are found. For low shear rate, the anisotropic ellipsoids retract to isotropic domains after shear cessation; while for higher shear rate, the string-like pattern breaks into necklace-like structure first and then the aligned structure relaxes to an isotropic distribution via diffusion process. The slow coarsening process upon cessation of shear is attributed to high viscosity of PC matrix and viscoelastic effects.