光谱指数趋势面的城市地表温度降尺度转换

针对城市及周边区域建造区和自然地表交织分布的特点,探讨了利用归一化植被指数(NDVI)和归一化建造指数(NDBI)构造趋势面的地表温度(LST)降尺度方法,以北京市市区及周边较平坦区域为例实现了LST自960 m向120 m的降尺度转换。分析了LST空间分布特征及NDVI、NDBI对地物的指示性特征;以北京市四至六环为界分析NDVI、NDBI趋势面对地表温度的拟合程度及各自的适用区域;在120 m、240 m、480 m和960 m 4个尺度上评价了NDVI、NDBI和NDVI+NDBI趋势面对LST的拟合程度和趋势面转换函数的尺度效应;对NDVI、NDBI和NDVI NDBI等3种方法的降尺度结果分覆盖类型、分区域对比评价。实验结果表明结合两种光谱指数的NDVI NDBI方法降尺度转换精度有所改善,改善程度取决于地表覆盖类型组合。     

基于Landsat数据地表特征参数与地表温度关系

以成都市为研究区,定量分析了各地表特征参数与地表温度之间的线性关系。通过对地表温度与归一化植被指数(NDVI)、归一化建筑指数(NDBI)、归一化水汽指数(NDMI)进行局部区域逐像元分析和总体区域统计分析,结果表明NDVI,NDMI,NDBI与地表温度间都存在明显的线性关系,可用于说明地表温度的动态变化,在3月份,NDMI与地温的相关性更优于NDVI。对传统城市热现象研究中,NDMI与NDBI能够用来以NDVI作为分析地表温度随季节而变化的互补的度量标准。     

Estimation of hourly and daily evapotranspiration and soil moisture using downscaled LST over various urban surfaces

Surface moisture is important to link land surface temperature (LST) to people’s thermal comfort. In urban areas, the surface roughness from buildings and urban trees impacts wind speed, and consequently surface moisture. To find the role of surface roughness in surface moisture estimation, we developed methods to estimate daily and hourly evapotranspiration (ET) and soil moisture, based on a case study of Indianapolis, Indiana, USA. In order to capture the spatial and temporal variations of LST, hourly and daily LST was produced by downscaling techniques. Given the heterogeneity in urban areas, fractions of vegetation, soil, and impervious surfaces were calculated. To describe the urban morphology, surface roughness parameters were calculated from digital elevation model (DEM), digital surface model (DSM), and Terrestrial Light Detection and Ranging (LiDAR). Two source energy balance (TSEB) model was employed to generate ET, and the temperature vegetation index (TVX) method was used to calculate soil moisture. Stable hourly soil moisture fluctuated from 15% to 20%, and daily soil moisture increased due to precipitation and decreased due to seasonal temperature change. ET over soil, vegetation, and impervious surface in the urban areas yielded different patterns in response to precipitation. The surface roughness from high-rise has bigger influence on ET in central urban areas.     

Normalised difference spectral indices and urban land cover as indicators of land surface temperature (LST)

Land cover changes associated with urbanisation modify microclimate, leading to urban heat islands, whereby cities are warmer than the surrounding countryside. Understanding the factors causing this phenomenon could help urban areas adapt to climate change and improve living conditions of inhabitants. In this study, land surface temperatures (LST) of Aarhus, a city in the high latitudes, are estimated from the reflectance of a thermal band (TIRS1; Band 10; 10.60–11.19 μm) of Landsat 8 on five dates in the summer months (one in 2015, and four in 2018). Spectral indices, modelled on the normalised difference vegetation index (NDVI), using all combinations of the first seven bands of Landsat 8 are calculated and their relationships with LST, analysed. Land cover characteristics, in terms of the percentages of tree cover, building cover and overall vegetation cover are estimated from airborne LiDAR data, building footprints and 4-band aerial imagery, respectively. The correlations between LST, the spectral indices and land cover are estimated.The difference in mean temperature between the rural and urban parts of Aarhus is up to 3.96 °C, while the difference between the warmer and colder zones (based on the mean and SD of LST) is up to 13.26 °C. The spectral index using the near infrared band (NIR; Band 5; 0.85-0.88 μm) and a short-wave infrared band (SWIR2; Band 7; 2.11–2.29 μm) has the strongest correlations (r: 0.62 to 0.89) with LST for the whole study area. This index is the inverse of normalised burn ratio (NBR), which has been used for mapping burnt areas. Spectral indices using different combinations of the infrared bands have stronger correlations with LST than the more widely used vegetation indices such as NDVI. The percentage of tree cover has a higher negative correlation (Pearson’s r: -0.68 to -0.75) with LST than overall vegetation cover (r: -0.45 to -0.63). Tree cover and building cover (r: 0.53 to 0.71) together explain up to 68 % of the variation in LST. Modification of tree and building cover may therefore have the potential to regulate urban LST.     

Spatial analysis of high-resolution urban thermal patterns in Vojvodina,Serbia

Main objective of this study was to establish a relationship between land cover and land surface temperature (LST) in urban and rural areas. The research was conducted using Landsat, WorldView-2 (WV-2) and Digital Mapping Camera. Normalised difference vegetation index and normalised difference built-up index were used for establishing the relation between built-up area, vegetation cover and LST for spatial resolution of 30 m. Impervious surface and vegetation area generated from Digital Mapping Camera from Intergraph and WV-2 were used to establish the relation between built-up area, vegetation cover and LST for spatial resolutions of 0.1, 0.5 and 30 m. Linear regression models were used to determine the relationship between LST and indicators. Main contribution of this research is to establish the use of combining remote sensing sensors with different spectral and spatial resolution for two typical settlements in Vojvodina. Correlation coefficients between LST and LST indicators ranged from 0.602 to 0.768.     

An integrated methodology for soil moisture analysis using multispectral data in Mongolia

Soil moisture (SM) content is one of the most important environmental variables in relation to land surface climatology, hydrology, and ecology. Long-term SM data-sets on a regional scale provide reasonable information about climate change and global warming specific regions. The aim of this research work is to develop an integrated methodology for SM of kastanozems soils using multispectral satellite data. The study area is Tuv (48°40′30″N and 106°15′55″E) province in the forest steppe zones in Mongolia. In addition to this, land surface temperature (LST) and normalized difference vegetation index (NDVI) from Landsat satellite images were integrated for the assessment. Furthermore, we used a digital elevation model (DEM) from ASTER satellite image with 30-m resolution. Aspect and slope maps were derived from this DEM. The soil moisture index (SMI) was obtained using spectral information from Landsat satellite data. We used regression analysis to develop the model. The model shows how SMI from satellite depends on LST, NDVI, DEM, Slope, and Aspect in the agricultural area. The results of the model were correlated with the ground SM data in Tuv province. The results indicate that there is a good agreement between output SM and SM of ground truth for agricultural area. Further research is focused on moisture mapping for different natural zones in Mongolia. The innovative part of this research is to estimate SM using drivers which are vegetation, land surface temperature, elevation, aspect, and slope in the forested steppe area. This integrative methodology can be applied for different regions with forest and desert steppe zones.     

Integrating temperature vegetation dryness index (TVDI) and regional water stress index (RWSI) for drought assessment with the aid of LANDSAT TM/ETM+ images

This paper presents a new drought assessment method by spatially and temporally integrating temperature vegetation dryness index (TVDI) with regional water stress index (RWSI) based on a synergistic approach. With the aid of LANDSAT TM/ETM data, we were able to retrieve the land-use and land-cover (LULC), vegetation indices (VIs), and land surface temperature (LST), leading to the derivation of three types of modified TVDI, including TVDI_SAVI, TVDI_ANDVI and TVDI_MSAVI, for drought assessment in a fast growing coastal area, Northern China. The categorical classification of four drought impact levels associated with the RWSI values enables us to refine the spatiotemporal relationship between the LST and the VIs. Holistic drought impact assessment between 1987 and 2000 was carried out by linking RWSI with TVDIs group wise. Research findings indicate that: (1) LST and VIs were negatively correlated in most cases of low, medium, and high vegetation cover except the case of high density vegetation cover in 2000 due to the effect of urban heat island (UHI) effect; (2) the shortage of water in 1987 was more salient than that that in 2000 based on all indices of TVDI and RWSI; and (3) TVDIs are more suitable for monitoring mild drought, normal and wet conditions when RWSI is smaller than 0.752; but they are not suitable for monitoring moderate and severe drought conditions.     

Satellite-based analysis of the role of land use/land cover and vegetation density on surface temperature regime of Delhi,India

The knowledge of the surface temperature is important to a range of issues and themes in earth sciences central to urban climatology, global environmental change and human-environment interactions. The study analyses land surface temperature (LST) estimation using temporal ASTER (Advanced Spaceborne Thermal Emission and Reflection Radiometer) datasets (day time and night time) over National Capital Territory Delhi using the surface emissivity information at pixel level. The spatial variations of LST over different land use/land cover (LU/LC) at day time and night time were analysed and relationship between the spatial distribution of LU/LC and vegetation density with LST was developed. Minimum noise fraction (MNF) was used for LU/LC classification which gave better accuracy than classification with original bands. The satellite derived emissivity values were found to be in good agreement with literature and field measured values. It was observed that fallow land, waste land/bare soil, commercial/industrial and high dense built-up area have high surface temperature values during day time, compared to those over water bodies, agricultural cropland, and dense vegetation. During night time high surface temperature values are found over high dense built-up, water bodies, commercial/industrial and low dense built-up than over fallow land, dense vegetation and agricultural cropland. It was found that there is a strong negative correlation between surface temperature and NDVI over dense vegetation, sparse vegetation and low dense built-up area while with fraction vegetation cover, it indicates a moderate negative correlation. The results suggest that the methodology is feasible to estimate NDVI, surface emissivity and surface temperature with reasonable accuracy over heterogeneous urban area. The analysis also indicates that the relationship between the spatial distribution of LU/LC and vegetation density is closely related to the development of urban heat islands (UHI).     

藏东南冰川地区250 m空间分辨率全天候地表温度生成

遥感全天候地表温度产品在多云雾地区意义重大,对冰川泥石流多发的藏东南地区极具应用价值,但遥感全天候地表温度空间分辨率不足限制了其在精细化灾害监测中的应用。以藏东南冰川地区为研究区,采用高程、坡度、坡向、地表覆盖类型、植被指数、地表反射率、积雪指数作为全天候地表温度的影响因子,结合移动窗口,进行多种地表温度降尺度方法的对比,进而使用最优的降尺度方法将现有的遥感全天候地表温度产品（TRIMS LST）的空间分辨率从1 km提升至250 m。利用地面站点实测数据的评价结果表明,基于梯度提升决策树（LightGBM）的降尺度方法得到的250 m空间分辨率全天候地表温度的均方根误差在白天/夜间为2.25 K/2.15 K,优于基于多元线性回归和随机森林的降尺度方法,且比原始1 km分辨率全天候地表温度的精度高0.25 K左右。基于Q指数与SIFI指数的图像质量评价结果表明,降尺度得到的250 m地表温度不仅在空间格局和幅值上与原始1 km遥感全天候地表温度一致,而且补充了大量的地表温度空间细节信息。生成得到的250 m分辨率的地表温度对于藏东南冰川地区的灾害分析具有积极的意义。     

A practical method for SRTM DEM correction over vegetated mountain areas

Digital elevation models (DEMs) are essential to various applications in topography, geomorphology, hydrology, and ecology. The Shuttle Radar Topographic Mission (SRTM) DEM data set is one of the most complete and most widely used DEM data sets; it provides accurate information on elevations over bare land areas. However, the accuracy of SRTM data over vegetated mountain areas is relatively low as a result of the high relief and the penetration limitation of the C-band used for obtaining global DEM products. The objective of this study is to assess the performance of SRTM DEMs and correct them over vegetated mountain areas with small-footprint airborne Light Detection and Ranging (Lidar) data, which can develop elevation products and vegetation products [e.g., vegetation height, Leaf Area Index (LAI)] of high accuracy. The assessing results show that SRTM elevations are systematically higher than those of the actual land surfaces over vegetated mountain areas. The mean difference between SRTM DEM and Lidar DEM increases with vegetation height, whereas the standard deviation of the difference increases with slope. To improve the accuracy of SRTM DEM over vegetated mountain areas, a regression model between the SRTM elevation bias and vegetation height, LAI, and slope was developed based on one control site. Without changing any coefficients, this model was proved to be applicable in all the nine study sites, which have various topography and vegetation conditions. The mean bias of the corrected SRTM DEM at the nine study sites using this model (absolute value) is 89% smaller than that of the original SRTM DEM, and the standard deviation of the corrected SRTM elevation bias is 11% smaller.     

Effects of prediction accuracy of the proportion of vegetation cover on land surface emissivity and temperature using the NDVI threshold method

Predicting land surface energy budgets requires precise information of land surface emissivity (LSE) and land surface temperature (LST). LST is one of the essential climate variables as well as an important parameter in the physics of land surface processes at local and global scales, while LSE is an indicator of the material composition. Despite the fact that there are numerous publications on methods and algorithms for computing LST and LSE using remotely sensed data, accurate prediction of these variables is still a challenging task. Among the existing approaches for calculating LSE and LST, particular attention has been paid to the normalised difference vegetation index threshold method (NDVI^THM), especially for agriculture and forest ecosystems. To apply NDVI^THM, knowledge of the proportion of vegetation cover (P_V) is essential. The objective of this study is to investigate the effect of the prediction accuracy of the P_V on the estimation of LSE and LST when using NDVI^THM. In August 2015, a field campaign was carried out in mixed temperate forest of the Bavarian Forest National Park, in southeastern Germany, coinciding with a Landsat-8 overpass. The P_V was measured in the field for 37 plots. Four different vegetation indices, as well as artificial neural network approaches, were used to estimate P_V and to compute LSE and LST. The results showed that the prediction accuracy of P_V improved using an artificial neural network (R²_CV = 0.64, RMSE_CV = 0.05) over classic vegetation indices (R²_CV = 0.42, RMSE_CV = 0.06). The results of this study also revealed that variation in the accuracy of the estimated P_V affected calculation results of the LSE. In addition, our findings revealed that, though LST depends on LSE, other parameters should also be taken into account when predicting LST, as more accurate LSE results did not increase the prediction accuracy of LST.     

基于OLI数据与决策树法的去山体阴影水体信息提取研究

研究山区地表水体信息OLI遥感数据去阴影自动提取方法,设计基于数字高程模型与指数提取的决策树分类方法,提高水体自动识别的精度。该方法选取改进的归一化水体指数、归一化植被指数、比值植被指数、主成分分析前3个分量以及波段之间的组合运算,并结合DEM构建决策树分类规则。综合采用单波段阈值、谱间关系、植被指数和水体指数阈值完成山体水体的去阴影识别研究,与计算机自动识别分类方法比较,其精度明显提高。结果表明,决策树分类方法在精度上明显高于常用的计算机自动分类方法,可以很好地被利用于OLI遥感数据水体信息的海量、大范围提取。     

基于地表定量参数的沙漠化遥感监测方法

利用野外沙漠化调查的定位数据和ETM+ 遥感数据，在实验分析的基础上，探讨了沙漠化程度与地表参数之间的定量关系，即沙漠化与植被指数（NDVI）、地表辐射温度（LST）之间的关系，提出了综合反映沙漠化土地生物物理特征的遥感监测指数——沙漠化遥感监测差值指数（DDI），为沙漠化遥感监测提供有效的定量化方法。     

A simple retrieval method of land surface temperature from AMSR-E passive microwave data—A case study over Southern China during the strong snow disaster of 2008

The analysis of the passive microwave radiance transfer equation certifies that there is a linear relationship between satellite-generated brightness temperatures (BT) and in situ observation temperature and that land surface temperature (LST) is largely influenced by vegetation cover conditions. Microwave polarization difference index (MPDI) is an effective indicator for characterizing the land surface vegetation cover density. Based on the analysis of LST models from AMSR-E BT with 6.9 GHz MPDI intervals at 0.04, 0.02 and 0.01, respectively, this paper developed a simplified LST regression model with MPDI-based five land cover types, combining observation temperatures from 86 meteorological observation stations. The study shows that smaller MPDI intervals can obtain higher accuracy of AMSR-E LST simulation, and that the combination of HDF Explorer and ArcGIS software was useful for automatically processing the pixel latitude, longitude and BT information from the AMSR-E HDF imagery files. The RMSE of the five LST simulation algorithms is between 1.47 and 1.92 °C, with an average LST retrieval error of 0.91–1.30 °C. Besides, only 7 polarization bands and 5 land surface types are required by the proposed simplified model. The new LST simulation models appears to be more effective for producing LST compared to past most studies, of which the accuracy used to be more than 2 °C. This study is one of the rare applications that combine the meteorological observation temperature with MPDI to produce the LST regression analysis algorithms with less RMSE from AMSR-E data. The results can be referred to similar areas of the world for LST retrieval or land surface process research, in particular under extreme bad weather conditions.     

On Urban Heat Island of Beijng Based on Landsat TM Data

IntroductionThe scientists have begun to retrieve land sur-face temperature (LST) fromsatellite data sincethe launch of TIROS-Ⅱin 60s of the 20th centu-ry . With the development of remote sensingtechnology and its application, more and moreLST retrieval …     

On urban heat island of Beijing based on landsat TM data

Land surface temperature (LST) of Beijing area was retrieved from Landsat TM thermal band data utilizing a radiative transfer equation and the urban heat island (HUI) effects of Beijing and its relationship with land cover and normalized difference vegetation index (NDVI) were discussed. The result of LST showed that the urban LST was evidently higher than the suburban one. The average urban LST was found to 4. 5°C and 9°C higher than the suburban and outer suburban temperature, respectively, which demonstrated the prominent UHI effects in Beijing. Prominent negative correlation between LST and NDVI was found in the urban area, which suggested the low percent vegetation cover in the urban area was the main cause of the urban heat island.     

基于Landsat TM数据的东莞市热岛效应研究

本文以东莞市为研究区域,利用1990年、1998年和2005年3期的Landsat TM数据,反演了东莞市地表温度。研究结果表明:①东莞市的高温区主要分布在建成区,低温区主要分布在水体和高植被覆盖区;②1990年到2005年,常温区面积明显减少,低温区面积大幅增加,高温区面积呈增加趋势;③从不同温度区间的转移分析来看,1990年至1998年、1998年至2005年两个时期,常温区发生转化的面积最大,其次是高温区;④地表温度与归一化植被指数都存在明显的负相关关系。     

Drought mapping using Geoinformation technology for some sites in the Iraqi Kurdistan region

Abstract

Iraq has suffered severely from drought in recent years and the year 2008 was the driest, particularly in the Iraqi Kurdistan region. This study incorporated Geoinformation technology into mapping the drought that severely affected the Kurdistan region in the years 2007–2008. Geoinformation technology provides support in the theories, methods and techniques for building, and development of Digital Earth aspect. Five vegetation, soil, water, and land surface temperature (LST) indices were applied to two Landsat 7 ETM+ imageries of June 2007 and June 2008, to assess the drought impacts in Erbil governorate Kurdistan during the study period. The indices that were employed in this study were Normalized Difference Vegetation Index, Bare Soil Index, Normalized Differential Water Index, Tasseled Cap Transformation Wetness, and LST. The results revealed a significant decrease in the vegetative cover (56.7%) and a decline in soil/vegetation wetness (29.9%) of the total study area. Likewise, there was a significant reduction in the water bodies surface area in the region such as Dokan Lake, which lost 32.5% of its surface area in comparison with the previous year, 2007. The study results showed that the soil moisture content was the most effective actor on the vegetative cover, LST, and drought status in the study area.     

Area Delineation and Spatial-Temporal Dynamics of Urban Heat Island in Lanzhou City,China Using Remote Sensing Imagery

One of the key impacts of rapid urbanization on the environment is the effect of urban heat island (UHI). By using the Landsat TM/ETM+ thermal infrared remote sensing data of 1993, 2001 and 2011 to retrieve the land surface temperature (LST) of Lanzhou City, and by adopting object-oriented fractal net evolution approach (FNEA) to make image segmentation of the LST, the UHI elements were extracted. The G* index spatial aggregation analysis was made to calculate the urban heat island ratio index (URI), and the landscape metrics were used to quantify the changes of the spatial pattern of the UHI from the aspects of quantity, shape and structure. The impervious surface distribution and vegetation coverage were extracted by a constrained linear spectral mixture model to explore the relationships of the impervious surface distribution and vegetation coverage with the UHI. The information of urban built-up area was extracted by using UBI (NDBI-NDVI) index, and the effects of urban expansion on city thermal environment were quantitatively analyzed, with the URI and the LST grade maps built. In recent 20 years, the UHI effect in Lanzhou City was strengthened, with the URI increased by 1.4 times. The urban expansion had a spatiotemporal consistency with the UHI expansion. The patch number and density of the UHI landscape were increased, the patch shape and the whole landscape tended to be complex, the landscape became more fragmented, and the landscape connectivity was decreased. The heat island strength had a negative linear correlation with the urban vegetation coverage, and a positive logarithmic correlation with the urban impervious surface coverage.     

Land surface temperature and its impact factors in Western Sichuan Plateau,China

The understanding influence of multiple factors variations on land surface temperature (LST) remains elusive. LST was retrieved by the atmospheric correction algorithms. Based on the correlation coefficients, stepwise regression analysis was developed to examine how multiple factors variability led to LST variations. The differences in LST between impact factors vary depending on time in a day. The elevation and land use types significantly affect the LST in sunny slope or shadow areas has a significantly quadratic curve correlation or a negative linear correlation with it, the influence of slope and aspect is not very significant. LST for forestland, grassland and bare land in the sunny slope and shadow area was the cubic polynomial related to its elevation. Normalized difference vegetation index (NDVI) and normalized difference moisture index (NDMI) effectively express LST in mountainous. LST and NDMI or NDVI have a significantly negative correlation, NDMI is more effective and more applicable for the expression of LST.