Pb<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Sn<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Te Alloys: Application Considerations

The search for alternative energy sources is at the forefront of applied research. In this context, thermoelectricity, i.e., direct conversion of thermal into electrical energy, plays an important role, particularly for exploitation of waste heat. Materials for such applications should exhibit thermoelectric potential and mechanical stability. PbTe-based compounds include well-known n-type and p-type compounds for thermoelectric applications in the 50°C to 600°C temperature range. This paper is concerned with the mechanical and transport properties of p-type Pb_0.5Sn_0.5Te:Te and PbTe<Na> samples, both of which have a hole concentration of ∼1 × 10²⁰ cm⁻³. The ZT values of PbTe<Na> were found to be higher than those of Pb_0.5Sn_0.5Te:Te, and they exhibited a maximal value of 0.8 compared with 0.5 for Pb_0.5Sn_0.5Te:Te at 450°C. However, the microhardness value of 49 H_V found for Pb_0.5Sn_0.5Te:Te was closer to that of the mechanically stable n-type PbTe (30 H_V) than to that of PbTe<Na> (71 H_V). Thus, although lower ZT values were obtained, from a mechanical point of view Pb_0.5Sn_0.5Te:Te is preferable over PbTe<Na> for practical applications.     

Specific features of conductivity of Cd<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Zn<Subscript>x</Subscript>Te and Cd<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Mn<Subscript>x</Subscript>Te single crystals

The electrical characteristics of p-type Cd_1?xZn_xTe (x=0.05) and Cd_1?xMn_xTe (x=0.04) single crystals with a resistivity of 10³–10¹⁰ Ω cm at 300 K are studied. The conductivity and its variation with temperature are interpreted on the basis of statistics of electrons and holes in a semiconductor with deep acceptor impurities (defects), with regard to their compensation by donors. The depth of acceptor levels and the degree of their compensation are determined. The problems of attaining near intrinsic conductivity close to intrinsic are discussed.     

Metal-insulator transition in chromium-doped Pb<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Ge<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Te alloys

The electrical properties of chromium-doped n-Pb_1?x Ge _x Te alloys (x = 0.02–0.13) have been studied. A decrease in the free-electron concentration and a metal-insulator transition are observed as the germanium content of alloys increases. This is due to the Fermi level pinning by the chromium impurity level and to the flow of electrons from the conduction band to the impurity level. The experimental data obtained are used to calculate, in terms of the two-band Kane dispersion law, the dependences of the electron concentration and Fermi energy on the germanium content in the alloy. The motion rate of the chromium-related level with respect to the conduction band bottom is determined and a model of variation of the electronic structure with the matrix composition is suggested.     

Highly Efficient Ge-Rich Ge<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Pb<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Te Thermoelectric Alloys

The search for alternative energy sources is presently at the forefront of applied research. In this context, thermoelectricity for direct energy conversion from thermal to electrical energy plays an important role. This paper is concerned with the development of highly efficient p-type Ge _x Pb_1−x Te alloys for thermoelectric applications, using spark plasma sintering. The carrier concentration of GeTe was varied by alloying of PbTe and/or by Bi₂Te₃ doping. Very high ZT values up to ~1.8 at 500°C were obtained by doping Pb_0.13Ge_0.87Te with 3 mol% Bi₂Te₃.     

Cathodoluminescence from dilute GaN<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>As<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript> solutions (<Emphasis Type="Italic">x</Emphasis> ≤ 0.03)

Cathodoluminescence from GaN _x As_1?x layers (0 ≤ x ≤ 0.03) was measured at photon energies ranging from the intrinsic absorption edge to 3 eV at room temperature. An additional emission band was visible in the visible range of the cathodoluminescence spectra. The intensity of this band is two orders of magnitude lower than the edge-emission intensity. The photon energy corresponding to the peak of this band and its FWHM are virtually independent of x and equal to ～2.1 and 0.6–0.7 eV, respectively. This emission is related to indirect optical transitions of electrons from the L _6c and Δ conduction-band minimums to the Γ₁₅ valence-band maximum.     

Effective electron mass in a Mn<Subscript>x</Subscript>Hg<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Te system

The reflection spectra of n-Mn_xHg_1?xTe single crystals and epitaxial layers were measured at 300 K. The effective electron mass was determined for the samples with x=0.06–0.10 and an electron concentration N>6×10¹⁶ cm^?3. The calculated values of effective electron mass are close to experimental values.     

Vanadium-Doped Cadmium Manganese Telluride (Cd<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Mn<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Te) Crystals as X- and Gamma-Ray Detectors

CdMnTe offers several potential advantages over CdZnTe as a room- temperature gamma-ray detector, but many drawbacks in its growth process impede the production of large, defect-free single crystals with high electrical resistivity and high electron lifetimes. Here, we report our findings of the defects in several vanadium-doped as-grown as well as annealed Cd_1−x Mn _x Te crystals, using etch pit techniques. We carefully selected single crystals from the raw wafer to fabricate and test as a gamma-ray detector. We describe the quality of the processed Cd_1−x Mn _x Te surfaces, and compare them with similarly treated CdZnTe crystals. We discuss the characterization experiments aimed at clarifying the electrical properties of fabricated detectors, and evaluate their performance as gamma-ray spectrometers.     

Investigation of Multicarrier Transport in LPE-Grown Hg<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Cd<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Te Layers

A detailed study is presented of multicarrier transport properties in liquid-phase epitaxy (LPE)-grown n-type HgCdTe films using advanced mobility spectrum analysis techniques over the temperature range from 95 K to 300 K. Three separate electron species were identified that contribute to the total conduction, and the temperature-dependent characteristics of carrier concentration and mobility were extracted for each individual carrier species. Detailed analysis allows the three observed contributions to be assigned to carriers located in the bulk long-wave infrared (LWIR) absorbing layer, the wider-gap substrate/HgCdTe transition layer, and a surface accumulation layer. The activation energy of the dominant high-mobility LWIR bulk carrier concentration in the high temperature range gives a very good fit to the Hansen and Schmit expression for intrinsic carrier concentration in HgCdTe with a bandgap of 172 meV. The mobility of these bulk electrons follows the classic μ ~ T ^−3/2 dependence for the phonon scattering regime. The much lower sheet densities found for the other two, lower-mobility electron species show activation energies of the order of ~20 meV, and mobilities that are only weakly dependent on temperature and consistent with expected values for the wider-bandgap transition layer and a surface accumulation layer.     

Photoluminescence of Hg<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Cd<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Te based heterostructures grown by molecular-beam epitaxy

Photoluminescence (PL) of Hg_{1 − x} Cd _x Te-based heterostructures grown by molecular-beam epitaxy (MBE) on GaAs and Si substrates has been studied. It is shown that a pronounced disruption of the long-range order in the crystal lattice is characteristic of structures of this kind. It is demonstrated that the observed disordering is mostly due to the nonequilibrium nature of MBE and can be partly eliminated by postgrowth thermal annealing. Low-temperature spectra of epitaxial layers and structures with wide potential wells are dominated by the recombination peak of an exciton localized in density-of-states tails; the energy of this peak is substantially lower than the energy gap. In quantum-well (QW) structures at low temperatures, the main PL peak is due to carrier recombination between QW levels and the energy of the emitted photon is strictly determined by the effective (with the QW levels taken into account) energy gap.     

Analysis of Carrier Transport in <Emphasis Type="Italic">n</Emphasis>-Type Hg<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Cd<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Te with Ultra-Low Doping Concentration

Mercury cadmium telluride (HgCdTe, or MCT) with low n-type indium doping concentration offers a means for obtaining high performance infrared detectors. Characterizing carrier transport in materials with ultra low doping (N_D?=?10¹⁴ cm^?3 and lower), and multi-layer material structures designed for infrared detector devices, is particularly challenging using traditional methods. In this work, Hall effect measurements with a swept B-field were used in conjunction with a multi-carrier fitting procedure and Fourier-domain mobility spectrum analysis to analyze multi-layered MCT samples. Low temperature measurements (77 K) were able to identify multiple carrier species, including an epitaxial layer (x?=?0.2195) with n-type carrier concentration of n?=?1?×?10¹⁴ cm^?3 and electron mobility of μ?=?280000 cm²/Vs. The extracted electron mobility matches or exceeds prior empirical models for MCT, illustrating the outstanding material quality achievable using current epitaxial growth methods, and motivating further study to revisit previously published material parameters for MCT carrier transport. The high material quality is further demonstrated via observation of the quantum Hall effect at low temperature (5 K and below).     

Modeling of the Structural Properties of Hg<Subscript>1–<Emphasis Type="Italic">x</Emphasis></Subscript>Cd<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Te

Structural properties of Hg_1–x Cd _x Te are investigated by using first-principles calculations based on density functional theory. An energetically minimized and geometrically optimized model for Hg_1–x Cd _x Te was formulated. A virtual crystal approximation model for Hg_1–x Cd _x Te produced a poor fit to experimental lattice parameters and Vegard’s law. However, the virtual crystal approximation model provides reasonably accurate values for the band gap␣energy. An ordered alloy approximation model produced a good fit to Hg_1–x Cd _x Te lattice parameters and followed Vegard’s law. The ordered alloy approximation also produced a bimodal distribution in Hg-Te and Cd-Te bond lengths in agreement with experimental results.     

Optical Properties of Epitaxial Al<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>In<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Sb Alloy Layers

Optical studies of unstrained narrow-gap Al _x In_{1 − x} Sb semiconductor alloy layers are carried out. The layers are grown by molecular-beam epitaxy on semi-insulating GaAs substrates with an AlSb buffer. The composition of the alloys is varied within the range of x = 0–0.52 and monitored by electron probe microanalysis. The band gap E _g is determined from the fundamental absorption edge with consideration for the nonparabolicity of the conduction band. The refined bowing parameter in the experimental dependence E _g (x) for the Al _x In_{1 − x} Sb alloys is 0.32 eV. This value is by 0.11 eV smaller than the commonly referred one.     

Low-temperature microwave magnetoresistance of lightly doped <Emphasis Type="Italic">p</Emphasis>-Ge and <Emphasis Type="Italic">p</Emphasis>-Ge<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Si<Subscript>x</Subscript>

The magnetoresistance of a lightly doped p-Ge_1?xSi_x alloy is studied in the range of compositions x = 1–2 at %. The results are compared with the available data for lightly doped p-Ge. The studies have been carried out using ESR measurements at a frequency of 10 GHz in the temperature range 10–120 K. It is established that micrononuniformity in the distribution of Si in the Ge lattice (Si clusters) suppresses the interference part of the anomalous magnetoresistance and, in addition, results in an averaging of the effects of light and heavy holes. This observation suggests a sharp decrease in the inelastic scattering time in the case of a Ge_1?xSi_x solid solution as compared to that of Ge.     

Investigation of MBE-Growth of Mid-Wave Infrared Hg<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Cd<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Se

Undoped mid-wave infrared Hg_1?xCd_xSe epitaxial layers have been grown to a nominal thickness of 8–14 μm on GaSb (211)B substrates by molecular beam epitaxy (MBE) using constant beam equivalent pressure ratios. The effects of growth temperature from 70°C to 120°C on epilayer quality and its electronic parameters has been examined using x-ray diffraction (XRD) rocking curves, atomic force microscopy, Nomarski optical imaging, photoconductive decay measurements, and variable magnetic field Hall effect analysis. For samples grown at 70°C, the measured values of XRD rocking curve full width at half maximum (FWHM) (116 arcsec), root mean square (RMS) surface roughness (2.7 nm), electron mobility (6.6?×?10⁴ cm² V^?1 s^?1 at 130 K), minority carrier lifetime (～?2 μs at 130 K), and background n-type doping (～?3?×?10¹⁶ cm^?3 at 130 K), indicate device-grade material quality that is significantly superior to that previously published in the open literature. All of these parameters were found to degrade monotonically with increasing growth temperature, although a reasonably wide growth window exists from 70°C to 90°C, within which good quality HgCdSe can be grown via MBE.     

Radiative recombination channels in Si/Si<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Ge<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> nanostructures

Using the solution of the 2D Schrödinger equation, systematic features of distribution of charge carriers in the Si/Si_{1 ? x} Ge _x nanostructures and variations in the efficiency of radiative recombination when pyramidal 2D clusters are transformed into 3D dome clusters with increasing thickness of nanolayers are established. The effect of the composition of the layers on the efficiency of the elastic stress in the structure and, as a consequence, the variation in conduction bands and valence band of the Si_{1 ? x} Ge _x nanostructures is taken into account. On realization of the suggested kinetics model, which describes recombination processes in crystalline structures, saturation of radiation intensity with increasing the pump intensity caused by an increase in the contribution of the Auger recombination is observed. A decrease in the contribution of the nonradiative Auger recombination is attained by decreasing the injection rate of carriers into the clusters, and more precisely, by an increase in the cluster concentration and an increase in the rate of radiative recombination.     

Optical properties of AgGa<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>In<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Se<Subscript>2</Subscript> alloys

Coarse-grained crystals of AgGaSe₂ and AgInSe₂ ternary compounds and their alloys are grown by planar crystallization of the melts. For the crystals produced in this way, the transmittance spectra near the fundamental absorption edge are studied. From the experimental spectra, the band gap (E _g) and its variation with composition are determined. It is established that E _g is a nonlinear function of the composition parameter x. The dependence E _g (x) is calculated theoretically in the context of the Van Vechten-Bergstresser model and Hill-Richardson pseudopotential model.     

Electrodeposition of Bi<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Sb<Subscript>2−<Emphasis Type="Italic">x</Emphasis></Subscript>Te<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> Thermoelectric Films from DMSO Solution

The electrochemical behavior of nonaqueous dimethyl sulfoxide solutions of Bi^III, Te^IV, and Sb^III was investigated using cyclic voltammetry. On this basis, Bi _x Sb_2−x Te _y thermoelectric films were prepared by the potentiodynamic electrodeposition technique in nonaqueous dimethyl sulfoxide solution, and the composition, structure, morphology, and thermoelectric properties of the films were analyzed. Bi _x Sb_2−x Te _y thermoelectric films prepared under different potential ranges all possessed a smooth morphology. After annealing treatment at 200°C under N₂ protection for 4 h, all deposited films showed p-type semiconductor properties, and their resistances all decreased to 0.04 Ω to 0.05 Ω. The Bi_0.49Sb_1.53Te_2.98 thermoelectric film, which most closely approaches the stoichiometry of Bi_0.5Sb_1.5Te₃, possessed the highest Seebeck coefficient (85 μV/K) and can be obtained under potentials of −200 mV to −400 mV.     

The influence of the magnetic field on the effect of drag of electrons by phonons in <Emphasis Type="Italic">n</Emphasis>-Cd<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Hg<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Te

Thermopower in n-Cd_0.2Hg_0.8Te (6–100 K) is studied. A large effect of drag of the charge carriers by phonons α_ph is found. The influence of the magnetic field H on the drag thermopower is considered. It is established that the magnetic field exerts the effect mainly on the electron component of α_ph. The data are interpreted in the context of the theory taking into account the effect of H on thermopower α_ph, in which parameter A(ɛ) proportional to the static force of the drag effect is introduced. By the experimental data α_ph(T, H), T, and H dependences A(ɛ) are determined. It is shown that, as H increases, A(ɛ) sharply decreases. This explains a decrease in α_ph in the magnetic field, power index k in dependence α_ph ∝ T ^−κ, and narrowing the region of manifestation of the drag effect. It is established that at classically high fields, the drag effect in n-Cd_0.2Hg_0.8Te does not vanish.     

Electroluminescence and phototrigger effect in single crystals of GaS<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Se<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript> alloys

The effects of switching and electroluminescence as well as the interrelation between these effects in single crystals of GaS _x Se_1?x alloys are detected and studied. It is established that the threshold voltage for switching depends on temperature, resistivity, and composition of alloys, and also on the intensity and spectrum of photoactive light. As a result, a phototrigger effect is observed; this effect arises under irradiation with light from the fundamental-absorption region. Electroluminescence is observed in the subthreshold region of the current-voltage characteristic; the electroluminescence intensity decreases drastically to zero as the sample is switched from a high-resistivity state to a low-resistivity state. Experimental data indicating that the electroluminescence and the switching effect are based on the injection mechanism (as it takes place in other layered crystals of the III-V type) are reported.     

Influence of samarium on the thermoelectric figure of merit of Sm<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Pb<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Te alloys

The temperature and concentration dependences of the electrical (conductivity σ, the Hall coefficient R), thermoelectric (thermovoltage α), and thermal (thermal conductivity K _tot) characteristics of Sm _x Pb_{1 − x} Te alloys (x = 0, 0.02, 0.04, 0.08) are studied in the temperature range 100–500 K. Using the data for σ, α, and K _tot, the thermoelectric power α²σ, figure of merit Z, and efficiency δ are calculated. It is established that at room-temperature α²σ and Z peak at the hole concentration p ≈ 1.2 × 10¹⁸ cm⁻³.