固载MnP-PGMA/SiO2催化剂的制备及其对乙苯氧化反应的催化性能

在溶液聚合体系中,将聚甲基丙烯酸缩水甘油酯(PGMA)接枝在硅胶微粒表面,制备了接枝微粒PGMA/SiO2;通过环氧键的开环反应,实现了Meso-四(对羟基苯基)卟啉(THPP)在PGMA/SiO2上的键合,制备了键合有羟基苯基卟啉(HPP)的HPP-PGMA/SiO2;进一步使锰盐与HPP-PGMA/SiO2发生配位反应,制备了固载MnP(锰卟啉)-PGMA/SiO2催化剂.以分子氧为氧源,将MnP-PGMA/SiO2催化剂用于乙苯氧化反应,常压下实现了乙苯向苯乙酮的转化,并探索了乙苯氧化过程中的若干规律.结果表明,MnP-PGMA/SiO2催化剂能有效活化分子氧,显著催化乙苯氧化为苯乙酮的反应过程;于95℃常压下反应12 h,苯乙酮收率接近18%,产物α-甲基苄醇的含量则极少.在催化氧化体系中,作为仿生催化剂的MnP存在最适宜用量,过量的MnP反而会抑制催化剂活性.在PGMA/SiO2表面,MnP的固载密度越小,催化剂的活性越高.在循环使用中,催化剂的活性呈升高的趋势.     

侧链键合锰卟啉的线型聚甲基丙烯酸缩水甘油酯的制备及其谱学性质

采用Adler法合成了Meso-四(对羟基苯基)卟啉(THPP), 在均相体系中使聚甲基丙烯酸缩水甘油酯(PGMA)与THPP发生开环反应, 得到侧链键合有羟基苯基卟啉的线型PGMA(HPP-PGMA); 进一步使HPP-PGMA与锰离子发生配合作用, 得到侧链键合有锰卟啉(MnP)的线型PGMA(MnP-PGMA), 测定了HPP-PGMA的1H NMR谱, 表征了其化学结构; 测定了HPP-PGMA与MnP-PGMA的UV-Vis光谱及荧光发射光谱, 考察了其光物理行为. 实验结果表明, 通过THPP外环上羟基与PGMA侧基环氧键的开环成醚反应, 可以顺利地将羟基苯基卟啉及其锰配合物键合在PGMA的侧链上. HPP-PGMA具有THPP的特征电子吸收光谱与荧光发射光谱, 且随着THPP键合度的增加, 光谱的强度增强. MnP-PGMA具有小分子锰卟啉的特征电子吸收光谱与荧光特征, 其Soret吸收带发生显著红移(红移58 nm), Q吸收带的数量减为3个吸收峰; 实验发现, MnP-PGMA与小分子锰卟啉类似, 在Q发射带没有荧光发射.     

P(4VP-co-St)/SiO2固载的取代钴卟啉对乙苯的催化氧化性能

通过轴向配位法将不同结构的钴卟啉(CoTXPP(X=H, Cl, NO2))分别固载到接枝微粒聚(4-乙烯基吡啶-co-苯乙烯)/SiO2(P(4VP-co-St)/SiO2)上, 室温下分别制备了P(4VP-co-St)/SiO2固载的金属卟啉催化剂CoTPP-P(4VP-co-St)/SiO2, CoTClPP-P(4VP-co-St)/SiO2和CoTNPP-P(4VP-co-St)/SiO2, 利用傅立叶变换红外(FTIR)光谱和电子吸收光谱对其结构及轴配过程进行了表征. 在无溶剂、无助催化剂和还原剂的体系中, 研究对比了其催化分子氧氧化乙苯为苯乙酮的性能, 考察了不同反应条件对苯乙酮产率的影响. 研究发现, 其催化活性随着环外取代基吸电子能力的增强而提高. CoTNPP-P(4VP-co-St)/SiO2的催化活性和选择性最好, 在120 ℃常压下其催化乙苯反应12 h, 苯乙酮收率达到25.53%, 产物α-甲基苄醇的含量则极少. 与普通的催化剂不同, 在催化氧化体系中, CoTNPP-P(4VP-co-St)/SiO2存在最适宜用量, 过量的CoTNPP-P(4VP-co-St)/SiO2反而会使其催化活性降低; P(4VP-co-St)/SiO2表面CoTXPP的固载密度存在一最佳值. 此外, 固载化以后, 催化剂具有较好的重复使用性. 结果表明, 接枝微粒P(4VP-co-St)/SiO2对金属卟啉不仅有明显的保护作用, 而且能提高其稳定性.     

咖啡因替代物(茶碱)分子表面印迹材料的制备及其分子识别特性研究

采用巯基-过氧化苯甲酰(BPO)氧化还原引发体系,先实现了甲基丙烯酸缩水甘油酯(GMA)在微米级硅胶微粒表面的引发接枝聚合,制得接枝微粒PGMA/SiO2.使接枝大分子PGMA的环氧基团与5-氨基水杨酸(ASA)发生开环反应,将水杨酸基团键合在接枝大分子侧链,制得功能接枝微粒SA-PGMA/SiO2,并对其化学结构与表面电性能进行了表征.考察研究了功能微粒SA-PGMA/SiO2与咖啡因替代物茶碱分子之间的相互作用力.研究表明,微粒SA-PGMA/SiO2与茶碱分子之间存在有强的次价键力(静电和氢键相互作用).在此基础上,采用本课题组建立的新型分子表面印迹技术,以咖啡因替代物茶碱为模板分子,乙二醇二缩水甘油醚(EGDE)为交联剂,对接枝在硅胶表面的功能大分子链SA-PGMA进行了交联印迹,制备了茶碱分子表面印迹材料MIP-SAP/SiO2,深入考察研究了其分子识别特性.实验结果表明,相对于两种对照物甘油茶碱和苦参碱,印迹材料MIP-SAP/SiO2对茶碱分子具有特异的识别选择性与优良的结合亲和性,相对于甘油茶碱,印迹材料对茶碱的识别选择性系数为7.72.     

配位负载金属卟啉的合成及催化氧化环已烷的性能研究

合成了三种与咪唑配体键合的新型载体，并通过其与四苯基卟啉铁和卟啉锰配位得到了改性的负载金属卟啉催化剂。讨论了它们在催化氧化环己烷反应中的稳定性、活性等，结果表明配位负载方式明显提高了金属卟啉的稳定性，其中硅胶配位负载锰卟啉还具有较高的活性。     

配位负载金属卟啉的合成及催化氧化环己烷的性能研究

合成了三种与咪唑配体键合的新型载体，并通过其与四苯基卟啉铁卟啉锰配位得到了改性的负载金属卟啉催化剂。讨论了它们在催化氧化环己烷反应中的稳定性，活性等，结果表明本位负载方式明显提高了金属卟啉的稳定性，其中硅胶配置负载锰卟啉还具有较高的活性。     

过渡金属卟啉／高价盐体系催化分子氧对芳烃侧链氧化的研究

研究了四-全氟苯基卟啉过渡金属(TPFPPM,M=Co、Mn、Fe)/高价金属盐体系催化分子氧对烷基芳烃侧链氧化反应.结果表明,TPFPPCo催化乙苯及其衍生物的侧链氧化时,加入底物1/800的K2Cr2O7对反应有很好的促进作用,乙苯最高转化率达55.2%,苯乙酮收率为51.0%.该催化体系对于取代烷基苯,如正丙苯、正丁苯和对-溴乙苯也具有很好的催化效果.     

硅胶固载聚4-乙烯吡啶-Cu(Ⅱ)配合物催化分子氧氧化乙苯的性能研究

以固载于微米级硅胶表面的聚4-乙烯吡啶-铜(Ⅱ)配合物(P4VP-Cu(Ⅱ)/SiO2)为催化剂,以分子氧为氧化剂,在常压下实施了将乙苯氧化为苯乙酮的催化氧化反应;用红外光谱、紫外光谱及液相色谱对产物的化学结构进行了表征;重点研究了催化剂的催化性能,以及各种条件(温度、催化剂性质、催化剂用量等)对催化氧化反应的影响;并分析了催化氧化反应的机理.研究结果表明,固载于硅胶表面的聚4-乙烯吡啶-Cu(Ⅱ)配合物能有效地活化分子氧,显著地催化氧化乙苯为苯乙酮的反应过程;该催化剂具有优良的催化活性与选择性,于130℃常压下通氧气反应10h,可使约60%的乙苯转化为苯乙酮,另一氧化产物α-甲基苄醇的含量则极少.另外,该催化剂具有较好的重复使用稳定性.     

N-羟基邻苯二甲酰亚胺与8-羟基喹啉氧钒(Ⅳ)配合物协同催化分子氧氧化乙苯

研究了钒化合物对N-羟基邻苯二甲酰亚胺(NHPI)催化分子氧氧化乙苯反应中的调变效应.结果表明,由8-羟基喹啉及其衍生物与乙酰丙酮氧钒(Ⅳ)配位制得的8-羟基喹啉氧钒(Ⅳ)配合物的催化活性比乙酰丙酮氧钒(Ⅳ),NH4VO3和V2O5的高.在优化的反应条件下,乙苯转化率和苯乙酮选择性可分别达60％～69％和97％.基于液...     

在聚合物微球 GMA/MMA 表面同步合成与固载卟啉及固载化金属卟啉的催化氧化性能

 制备了甲基丙烯酸缩水甘油酯 (GMA) 与甲基丙烯酸甲酯 (MMA) 共聚微球 GMA/MMA, 并通过键合有对羟基苯甲醛 (HBA) 的改性微球 HBA-GMA/MMA 与苯甲醛 (或取代苯甲醛) 以及吡咯间的 Adler 反应, 实现了卟啉在共聚微球 GMA/MMA 表面的同步合成与固载, 制得了固载有苯基卟啉 (PP)、对氯苯基卟啉 (CPP)、对硝基苯基卟啉 (NPP) 的功能化微球 PP-GMA/MMA, CPP-GMA/MMA 和 NPP-GMA/MMA. 重点考察了影响卟啉同步合成与固载过程的因素. 制备了固载有钴卟啉的催化剂, 并以分子氧氧化乙苯为模型反应, 考察了催化剂的活性. 结果表明, 苯甲醛取代基的结构、催化剂的酸性和溶剂的极性对卟啉的同步合成与固载都有较大的影响; 钴卟啉催化剂对分子氧氧化乙苯反应具有较高的催化活性, 且当钴卟啉外环上含有强吸电子基团硝基时, 催化剂活性最高.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.