Borland C^＋＋ for Windows下应用程序展示屏幕的设计与实现

本文介绍了用Ｂｏｒｌａｎｄ Ｃ＾＋＋开发Ｗｉｎｄｏｗｓ应用程序创建展示屏幕的一种通用方法，对实现展示屏幕有关的重要知识（如：位映像图等）也作了介绍。并给出了与创建展示屏幕有关的Ｂｏｒｌａｎｄ Ｃ＾＋＋源程序清单，对读者用Ｃ＾＋＋开发Ｗｉｎｄｏｗｓ应用程序界面具有重要意义。     

基于ODBC的VisualC＋＋应用程序设计研究

本文简要介绍了ＯＤＢＣ的工作原理，基于ＯＤＢＣ开发ＶｉｓｕａｌＣ＋＋应用程序，重点就ＭＦＣ与ＯＤＢＣ驱动程序管理器的运行机制进行分析研究，给出了部分应用实例。     

BorlandC＋＋应用程序的可视化设计

本文结合作者用ＢｏｒｌａｎｄＣ＋＋４．５开发的一个大型的面向对象Ｗｉｎｄｏｗｓ应用程序，较系统地探讨ＢｏｒｌａｎｄＣ＋＋面向对象Ｗｉｎｄｏｗｓ应用程序的可视化．智能化设计。     

在C＋＋环境下开发Windows3.0的应用程序

本文介绍了如何通过Ｂｏｒｌａｎｄ Ｃ＋＋开发Ｗｉｎｄｏｗｓ３．ｘ的应用程序，同时说明了新一代面向对象的程序设计方法ＯＯＰ的基本特性和实现方法。     

用Visual C＋＋开发控制仿真系统

本文以移动机器人为控制对象,介绍了如何用Ｖｉｓｕａｌ Ｃ＋＋开发位置ＰＩＤ控制器,主要解决用单文档多窗口来对不同参数进行仿真,以达到多视图的仿真效果,主要内容由移动机器人的数学模型和Ｖｉｓｕａｌ Ｃ＋＋软件开发组成。     

C＋＋程序理解辅助系统

本文介绍了一个针对Ｃ＋＋语言的程序理解辅助系统ＨＯＯＰＵＳ（ｈｙｐｅｒｔｅｘｔ－ｂａｓｅｄｏｂｊｅｃｔ－ｏｒｉｅｎｅｄ ｐｒｏｇｒａｍ ｕｎｄｅｒｓｔａｎｄｉｎｇ ｓｕｐｐｏｒｔ ｓｙｓｔｅｍ），该系统基于程序结构分析技术，以易于程序中的信息，辅助理解Ｃ＋＋程序的功能与结构，另外，还利用ｈｙｐｅｒｔｅｘｔ、多维表现、导航与定位等技术对理解过程提供支持。     

用C＋＋和WINDOWS开发面向对象的轴承设计专家系统

本文以作者开发的面向对象的滑动轴承设计专家系统ＥＳＦＷＩＤ为例，详细介绍了面向对象的方法和用ＢｏｒｌａｎｄＣ＋＋语言在Ｗｉｎｄｏｗｓ下开发面向对象的万家系统设计的思想和方法。     

用VC＋＋编写CGI程序

醉地ＣＧＩ界面，特别是Ｗｉｎｄｏｗｓ ＣＧＩ界面原理的分析，介绍了用Ｖｉｓｕａｌ Ｃ＋＋语言编写ＣＧＩ程序的方法，并给出了一个用ＣＧＩ程序将ＷＷＷ服务器与系统上的数据库相连的例子。     

VisualC^＋＋的可视化新特征

在可视化技术方兴未艾的今天，Ｍｉｃｒｏｓｏｆｔ公司推出了强大的Ｗｉｎｄｏｗｓ应用程序开发工具ＶｉｓｕａｌＣ＋＋，本文介绍了它在可视化方面的几个主要特征及其应用。     

VisualC＋＋编程方法一则

本文以如何定做状态条为例，介绍了一种在Ｗｉｎｄｏｗｓ环境下用ＶｉｓｕａｌＣ＋＋编程的方法与技巧－找到用ＭＦＣ编程时所使用的类的原始定义，利用系统提供的源码来编程，并使用该方法解决了复杂的多档多视应用中的一个基本问题。     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

煤矿井下安全监控分站的设计及其仿真实现

为了设计一种具有低成本、低功耗、易操作、功能强且可靠性高的煤矿井下安全分站,针对煤矿安全生产实际,文章提出了采用MCS-51系列单片机为核心、具有CAN总线通信接口的煤矿井下安全监控分站的设计方案;首先给出煤矿井下安全监控分站的整体构架设计,然后着重阐述模拟量输入信号处理系统的设计过程,最后说明单片机最小系统及其键盘、显示、报警、通信等各个组成部分的设计;为验证设计方案的可行性与有效性,使用Proteus软件对设计内容进行仿真验证,设计的煤矿井下安全监控分站具有瓦斯、温度等模拟量参数超标报警功能和电机开停、风门开闭等开关量指示功能;仿真结果表明:设计的煤矿井下安全监控分站具有一定的实际应用价值.     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

基于QTE的蒙古文显示机制研究与实现

蒙古语言是中国蒙古族使用的通用语言,由于蒙古文区别于其他文字的书写方式和其自身变形机制等特点,在很多通用的文字处理引擎中都不被支持。在嵌入式产品开发与应用领域中Linux加QTE已经成为流行方式。该文给出了一种在QTE环境上实现基于标准Unicode的蒙古文点阵显示和变形算法, 并自定义了支持蒙古文的QTE组件,扩展了QTE功能,为在Linux加QTE方式的嵌入式体系结构中处理蒙古文提供了一种解决方法。     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

基于AD9626的模拟信号采集存储卡设计

自然界的绝大部分信号都是以模拟的形式存在,因此模拟信号的采集转换存储在数字时代十分关键。文章讨论了在雷达信号处理领域基于AD9626的AD采集存储卡的设计原理、硬件结构和程序设计与芯片配置等问题,为今后相关领域的研究提供了可参考的方案。     

The development of robot art

Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

A human-computer interface for non-computer specialists

The COM teleconferencing system was designed to be easy to use for both beginners and people with much computer experience. A number of design choices in organizing the human-computer interface were considered very carefully. These design problems are not unique for teleconferencing applications, but will appear in many other developments of human-computer interfaces for non-computer specialists. This report discusses naming conventions, menu format, user commands, help facility and the treatment of ‘type ahead’ from the users.