Synthesis of poly(styrene-co-isopropenyl acetate) -g-polyisobutylene graft copolymers via combination of radical polymerization with cationic polymerization

Random copolymers of poly(styrene-co-isopropenyl acetate) (SIPA) with an average number of 9 initiating sites per chain were synthesized by free radical copolymerization of styrene with a small amount of isopropenyl acetate using 2,2′-azo-bis-(isobutyronitrile) as an initiator at 70 °C. SIPA copolymer could be further used as macroinitiator for the grafting cationic polymerization of isobutylene (IB) from SIPA chain in CH₂Cl₂ at ?40 °C to produce graft copolymers of SIPA-g-PIB. The effect of SIPA concentration ([SIPA]), TiCl₄ concentration ([TiCl₄]) and IB concentration ([IB]) on initiation efficiency of macroinitiator, grafting efficiency of initiating sites, average length of PIB branches of the resulting graft copolymers were investigated. It can be found that almost all of the initiating sites of IPAc units on SIPA chains were active for the cationic polymerization of IB and both initiation efficiency and grafting efficiency were close to 100% at sufficient molar ratio of TiCl₄/IPAc. This synthetic route presents quantitative grafting efficiency and possibility to control length of PIB branches. The graft copolymers of SIPA-g-PIB with average 9-branched PIB chains having terminal functional tert-chlorine groups could be successfully obtained. The average molecular weight of PIB branches in SIPA-g-PIB graft copolymers could be mediated from 3900 to 47,300 g mol^?1 by changing the ratios of macroinitiator to monomer and concentration of TiCl₄.     

Blends of bacterial poly(3-hydroxybutyrate) and a poly(epichlorohydrin-co-ethylene oxide) copolymer: thermal and CO2 transport properties

In this work the miscibility and the carbon dioxide transport properties of a bacterial, isotactic poly(3-hydroxybutyrate) (iPHB) and its blends with a copolymer of epichlorohydrin and ethylene oxide (ECH-co-EO) have been studied. Blends were prepared by solution/precipitation. The aim to obtain miscible blends of iPHB with a rubbery second component (such as the ECH-co-EO copolymer) is to have mixtures with glass transition temperatures below room temperature. In these conditions, the iPHB chains not involved in the crystalline regions retain its mobility. This mobility seems to be necessary for the attack of microorganisms and the corresponding biodegradability.Miscibility is the general rule of these mixtures, as shown by the existence of a single glass transition temperature for each blend and by the depression of the iPHB melting point. The interaction energy density stabilising the mixtures, calculated using the Nishi-Wang treatment, was similar to those of other polymer mixtures involving different polyesters and poly(epichlorohydrin) (PECH) and ECH-co-EO copolymers. The so-called binary interaction model has been used in order to simulate the evolution of the interaction energy density with the ECH-co-EO copolymer composition. Previously reported experimental data on blends of iPHB with PECH and poly(ethylene oxide) (PEO) have been used to quantify the required segmental interaction energy densities.In the determination of the CO₂ transport properties of the mixtures, only iPHB rich blends containing up to 40% of copolymer were considered. The effect of the ECH-co-EO copolymer is to increase the sorption and the diffusion of the penetrant (and, consequently, the permeability) with respect to the values of the pure iPHB. This is primarily due to the reduction of the global crystallinity of the blends and to the low barrier character of the ECH-co-EO copolymer. Sorption data can be reasonably reproduced using an extension of the Henry's law to ternary systems.     

Living anionic synthesis and characterization of poly(epichlorohydrin-g-styrene) copolymers

Poly(epichlorohydrin-g-styrene) copolymers, P(ECH-g-S), of a wide range of compositions have been prepared in an argon atmosphere by coupling or deactivation of living polystyrene anions, PS^?, at the chloromethyl groups of polyepichlorohydrin, PECH, in solution in benzene, C₆H₆, toluene, CH₃C₆H₅, tetrahydrofuran, THF, and C₆H₆-THF solvent mixtures, usually at 20°C. When both polystyryl lithium, PS^? Li⁺, and PECH were in C₆H₆ or toluene, grafting reactions were accompanied by cross-linking due to lithium-halogen interchange, colloidal phase separation and degradation of the backbone polymer. When the PS^?Li⁺ in either C₆H₆ or THF was coupled with PECH in THF, cross-linking was avoided and degradation was minimized. Some non-degradative termination reactions also occurred on coupling in THF and THFC₆H₆ mixtures. A polar solvent was, however, found to be favourable for the coupling reaction. The graft copolymers were purified by fractional precipitation techniques and were characterized by infra-red spectroscopy, ultraviolet spectroscopy, microanalysis, gel permeation chromatography and solubility.     

Synthesis of thermoresponsive block and graft copolymers via the combination of living cationic polymerization and RAFT polymerization using a vinyl ether-type RAFT agent

A novel vinyl ether-type RAFT agent, benzyl 2-(vinyloxy)ethyl carbonotrithioate (BVCT) was synthesized for various block copolymers via the combination of living cationic polymerization of vinyl ethers and reversible addition−fragmentation chain transfer (RAFT) polymerization. The novel BVCT–trifluoroacetic acid adduct play an important role to produce well-defined block copolymers, which is both as a cationogen under EtAlCl₂ initiation system in the presence of ethyl acetate for living cationic polymerization and a RAFT agent for blocks by RAFT polymerization. The resulting polymer, poly(vinyl ether)s, by living cationic polymerization had a high number average α-end functionality (≥0.9) as determined by both ¹H NMR and MALDI-TOF-MS spectrometry. In addition, this poly(vinyl ether)s worked well as a macromolecular chain transfer agent for RAFT polymerization. The RAFT polymerization of radically polymerizable monomers was conducted in toluene using 2,2′-azobis(isobutyronitrile) at 70 °C. For example, a double thermoresponsive block copolymer (MOVE₆₁-b-NIPAM₁₅₀) consisting of 2-methoxyethyl vinyl ether (MOVE) and N-isopropylacrylamide (NIPAM) was prepared via the combination of living cationic polymerization and RAFT polymerization. The block copolymer reversibly formed and deformed micellar assemblies above the phase separation temperature (T_ps) of poly(NIPAM) block in water. This BVCT is not only functioned as an initiator, but also acted as a monomer. When BVCT was copolymerized with MOVE by living cationic polymerization, followed by graft copolymerization with NIPAM via RAFT polymerization, well-defined graft copolymers (MOVE_n-co-BVCT_m)-g-NIPAM_x (n = 62–73, m = 1–9, x = 19–214) were successfully obtained. However, no micelle formed in water above T_ps of poly(NIPAM) graft chain unlike the case of block copolymers.     

Synthesis of PAA-g-PNIPAM well-defined graft polymer by sequential RAFT and SET-LRP and its application in preparing size-controlled super-paramagnetic Fe3O4 nanoparticles as a stabilizer

A series of well-defined double hydrophilic graft copolymers, poly(acrylic acid)-g-poly(N-isopropylacrylamide) (PAA-g-PNIPAM), was employed as a novel water-soluble coating for constructing superparamagnetic iron oxide nanoparticles. The copolymer was synthesized via a three-step procedure: firstly, a well-defined hydrophobic PtBA-based backbone, poly(tert-butyl 2-((2-chloropropanoyloxy)-methyl)acrylate)-co-poly(tert-butyl acrylate), (PtBCPMA₁₉-co-PtBA₁₈), was prepared through RAFT copolymerization of a new trifunctional acrylic monomer, tert-butyl 2-((2-chloropropanoyloxy)methyl)acrylate and tert-butyl acrylate; secondly, taking this backbone as a macroinitiator to initiate SET-LRP of N-isopropylacrylamide resulted in well-defined (poly(tert-butyl 2-((2-chloropropanoyloxy)methyl)-acrylate)-co-poly(tert-butyl acrylate))-g-poly(N-isopropylacrylamide) ((PtBCPMA-co-PtBA)-g-PNIPAM) amphiphilic graft copolymers with relatively narrow polydispersities (M_w/M_n ≤ 1.31); thirdly, handling (PtBCPMA-co-PtBA)-g-PNIPAM in acidic conditions afforded PAA-g-PNIPAM graft copolymers. The resulting PAA-g-PNIPAM copolymers were directly utilized as a polymeric stabilizer in the preparation of superparamagnetic Fe₃O₄ nanoparticles. The particle size can be readily tuned in the range of 12.1–23.2 nm by varying the amount of PAA-g-PNIPAM copolymer or the length of PNIPAM side chain. Besides, the structure and properties of prepared Fe₃O₄/polymer nanocomposites were characterized by XRD, FT-IR, TGA, TEM, and magnetic measurement in detail.     

Anionic synthesis of poly(epichlorohydrin-g-styrene) and chemical modification of polyepichlorohydrin

Poly(epichlorohydrin-g-styrene) copolymers, P(ECH-g-S)s, have been prepared in solution by two different methods of coupling polyepichlorohydrin, PECH, with polystyrene, PS, containing a functional end group. In the first method, polystyryl carboxylic acid, PSCOOH, prepared from living polystyrene, was converted to the corresponding potassium salt which was coupled with PECH in dimethyl formamide solution usually at 60°C. In the second method, polystyryl potassium, PS^?K⁺, in tetrahydrofuran solution was end-capped with propylene sulphide to form PSCH₂CH(CH₃)S^?K⁺ which was coupled directly with PECH in tetrahydrofuran at 40°C. Grafting by the first reaction was relatively slow but occurred without significant adverse side reactions. The grafting by the second reaction was relatively fast, but side reactions occurred resulting in a cleavage of the graft copolymer. The graft copolymers were purified by fractional precipitation and extraction procedures and were characterized by infra-red and ultra-violet spectroscopy, microanalysis, gel permeation chromatography, differential scanning calorimetry, solution viscometry, dynamic mechanical testing, and electron microscopy. Solution properties of the graft copolymers in benzene-carbon tetrachloride and toluene-cyclohexane mixtures were studied. There was evidence of micelle formation in dilute solutions of the mixed solvents and microphase separation of components in the solid state. Nucleophilic substitution of chlorine atoms in PECH by phenyl acetate (C₆H₅ CH₂COO-) and thiophenoxide (C₆H₅S-) groups was performed.     

Synthesis of comb-shaped copolymers by combination of reversible addition-fragmentation chain transfer polymerization and cationic ring-opening polymerization

Comb-shaped graft copolymers with poly(methyl acrylate) as a handle were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization and ring-opening polymerization (ROP) techniques in three steps. First, copolymers of poly(styrene-co-chloromethyl styrene), poly(St-co-CMS), were prepared by RAFT copolymerization of St and CMS using 1-(ethoxycarbonyl)prop-1-yl dithiobenzoate (EPDTB) as RAFT agent. Second, the polymerization of MA using poly(St-co-CMS)-SC(S)Ph as macromolecular chain transfer agent produced block copolymer poly(St-co-CMS)-b-PMA. Third, cationic ring-opening polymerization of THF was performed using poly(St-co-CMS)-b-PMA/AgClO₄ as initiating system to produce comb-shaped copolymers. The structures of the poly(St-co-CMS), poly(St-co-CMS)-b-PMA and final comb-shaped copolymers were characterized by ¹H NMR spectroscopy and gel permeation chromatography (GPC).     

Synthesis of electrically conducting copolymers of aniline with o/m-amino benzoic acid by an inverse emulsion pathway

Copolymers of aniline and ortho/meta-amino benzoic acid were synthesized by chemical polymerization using an inverse emulsion pathway. The copolymers are soluble in organic solvents, and the solubility increases with the amino benzoic acid content in the feed. The reaction conditions were optimized with emphasis on high yield and relatively good conductivity (2.5×10⁻¹ S cm⁻¹). The copolymers were characterized by a number of techniques including UV-vis, FT-IR, FT-Raman, EPR and NMR spectroscopy, thermal analysis, SEM and conductivity. The influence of the carboxylic acid group ring substituent on the copolymers is investigated. The spectral studies reveal that the amino benzoic acid groups restrict the conjugation along the polymer chain. The SEM micrographs of the copolymers reveal regions of amorphous and crystalline domain. Thermal studies indicate a marginally higher thermal stability for poly(aniline-co-m-amino benzoic acid) compared to poly(aniline-co-o-amino benzoic acid).     

The synthesis of PHA‐g‐(PTHF‐b‐PMMA) multiblock/graft copolymers by combination of cationic and radical polymerization

A new and promising method for the diversification of microbial polyesters based on chemical modifications is introduced. Poly(3‐hydroxy alkanoate)‐g‐(poly(tetrahydrofuran)‐b‐poly(methyl methacrylate)) (PHA‐g‐(PTHF‐b‐PMMA)) multigraft copolymers were synthesized by the combination of cationic and free radical polymerization. PHA‐g‐PTHF graft copolymer was obtained by the cationic polymerization of THF initiated by the carbonium cations generated from the chlorinated PHAs, poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV), and poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) (PHBHx) in the presence of AgSbF₆. Therefore, PHA‐g‐PTHF graft copolymers with hydroxyl ends were produced. In the presence of Ce⁺⁴ salt, these hydroxyl ends of the graft copolymer can initiate the redox polymerization of MMA to obtain PHA‐g‐(PTHF‐b‐PMMA) multigraft copolymer. Polymers obtained were purified by fractional precipitation. In this manner, their γ‐values (volume ratio of nonsolvent to the solvent) were also determined. Their molecular weights were determined by GPC technique. The structures were elucidated using ¹H‐NMR and FTIR spectroscopy. Thermal analyses of the products were carried out using differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

NIR luminescence comparison of Zn-Nd Schiff-base complex doped or single-nodal grafted into PMMA

Through doping or grafting of a new ZnNd Schiff-base complex monomer [Zn(L)(4-vinyl-Py)Nd(NO₃)₃] (2; H₂L = N,N′-bis(3-methoxy-salicylidene)phenylene-1,2-diamine; 4-vinyl-Py = 4-vinyl-pyridine) into PMMA (poly(methyl methacrylate)), two kinds of hybrid materials 2@PMMA and Poly(2-co-MMA) with significantly improved physical properties including good Nd^3 +-centered near-infrared (NIR) luminescence were obtained. Especially the single-nodal ZnNd-grafted Poly(2-co-MMA) soluble in organic solvents exhibits the high sensitization efficiency (η_sens = Φ_Nd^L/Φ_Nd^Nd = 81%) even at a high feed molar ratio up to 1:50.     

Block copolysiloxanes and their complexation with cobalt nanoparticles

Block copolysiloxanes have been prepared and utilized to form complexes of cobalt nanoparticles encased in the copolymers. The coated nanoparticles could be dispersed in polydimethylsiloxane (PDMS) to afford PDMS ferrofluids.Poly(dimethylsiloxane-b-methylvinylsiloxane) (PDMS-b-PMVS) diblock copolymers were synthesized via anionic living polymerization with controlled molecular weights and narrow molecular weight distributions. The PMVS blocks were functionalized with trimethoxysilethyl or triethoxysilethyl pendent groups to yield poly(dimethylsiloxane-b-(methylvinyl-co-methyl(2-trimethoxysilethyl)siloxane) (PDMS-b-(PMVS-co-PMTMS)) or poly(dimethylsiloxane-b-(methylvinyl-co-methyl(2-triethoxysilethyl)siloxane) (PDMS-b-(PMVS-co-PMTES)) copolymers, respectively.Stable suspensions of mostly superparamagnetic cobalt nanoparticles were prepared in toluene in the presence of PDMS-b-(PMVS-co-PMTMS) and PDMS-b-(PMVS-co-PMTES) copolymers via thermolysis of Co₂(CO)₈. TEM micrographs showed non-aggregated cobalt nanoparticles with mean particle diameters ranging from ≈10-15 nm. Specific saturation magnetizations of the cobalt-copolymer complexes ranged from ∼40-110 emu g⁻¹ of cobalt.     

Synthesis and characterization of novel random copolyesters from trans-4-hydroxy-l-proline and functional cyclic esters

The melt polycondensation reaction of trans-4-hydroxy-N-benzyloxycarbonyl-l-proline (N-CBz-Hpr) and functional cyclic esters containing protected functional groups (carboxyl, and amino) at a wide range of molar fractions in the feed produced new degradable poly(N-CBz-Hpr-co-functional-ε-CL)s with stannous 2-ethylhexanoate (Sn(Oct)₂) as a catalyst. The optimal reaction conditions for the synthesis of the copolymers were obtained with 1.5 wt% Sn(Oct)₂ at 140 °C for 24 h. The copolymers obtained were characterized by Fourier transform infrared spectroscopy (FT-IR), ¹H NMR, differential scanning calorimetry, gel permeation chromatography, and Ubbelohde viscometry. The copolymers synthesized exhibited oligomeric molecular weights (3000-5000 g mol⁻¹) with modestly narrow molecular weight distributions (1.11-1.37). The values of the glass-transition temperature (T_g) of the copolymers depend on the compositions, and the molar fractions of cyclic lactone. For the poly(N-CBz-Hpr-co-4-EtC-ε-CL) system, with a decrease in 4-EtC-ε-CL contents from 79 to 3 mol%, the T_g increased from −34 to 67 °C In vitro degradation of these copolymers was evaluated from weight-loss measurements.     

Synthesis and characterization of amphiphilic functional polyesters by ring-opening polymerization and click reaction

During this work we have prepared novel amphiphilic graft-block (PαN₃CL-g-alkyne)-b-PCL functional polyesters, comprising poly(α-azido-ε-caprolactone-graft-alkyne) (PαN₃CL-g-alkyne) as the hydrophilic segment and poly(ε-caprolactone) (PCL) as the hydrophobic segment, by ring-opening polymerization of ε-caprolactone (ε-CL) with hydroxyl-terminated macroinitiator PαClCL, substituting pendent chloride with sodium azide. The copolymers were subsequently used for grafting of 2-propynyl-terminal alkyne moieties by the Cu(I)-catalyzed Huisgen’s 1,3-dipolar cycloaddition, thus producing a “click” reaction. ¹H NMR, FT-IR, GPC, and differential scanning calorimetry (DSC) examined the characteristics of the copolymers. Grafting of PMEs or PMPEGs onto the PαN₃CL-b-PCL caused these amphiphilic copolymers to self-assemble into micelles in the aqueous phase. Fluorescence, dynamic light scattering (DLS) and transmission electron microscopy (TEM) then examined these micelles. The critical micelle concentration (CMC) ranged from 8.2 mg L⁻¹ to 39.8 mg L⁻¹ at 25 °C and the average micelle size ranged from 140 to 230 nm. The hydrophilicity and length of the hydrophilic segment influenced micelle stability. The current study describes the drug entrapment efficiency and drug loading content of the micelles, dependent on the composition of graft-block polymers. The results from in vitro cell viability assays indicated that (PαN₃CL-g-alkyne)-b-PCL shows low cytotoxicity.     

Size-controllable gold nanoparticles stabilized by PDEAEMA-based double hydrophilic graft copolymer

Poly(N-isopropylacrylamide)-b-[poly(ethyl acrylate)-g-poly(2-(diethylamino)ethyl methacrylate)] (PNIPAM-b-(PEA-g-PDEAEMA)) double hydrophilic graft copolymers were employed to prepare stable colloidal gold nanoparticles in situ with controllable size in aqueous media without any external reducing agent. PDEAEMA side chains served as reduction agent and stabilizer and PNIPAM segment acted as a hydrated layer to enhance the stability of gold nanoparticles. These gold nanoparticles showed a remarkable colloidal stability without any observable flocculation or aggregation for at least 2 months and they were characterized by UV-vis, XRD, TEM and AFM in detail. The size of gold nanoparticles can be tuned by adjusting the length of PDEAEMA side chains and the molar ratio of [DEAEMA]/[AuCl₄⁻]. Both the increasing of the length of PDEAEMA side chains and the decreasing of [DEAEMA]/[AuCl₄⁻] molar ratio resulted in the fall of size.     

Novel amphiphilic temperature responsive graft copolymers PCL-<Emphasis Type="Italic">g</Emphasis>-P(MEO<Subscript>2</Subscript>MA-<Emphasis Type="Italic">co</Emphasis>-OEGMA) via a combination of ROP and ATRP: synthesis,characterization, and sol-gel transition

A series of well-defined novel amphiphilic temperature-responsive graft copolymers containing PCL analogues P(αClεCL-co-εCL) as the hydrophobic backbone, and the hydrophilic side-chain PEG analogues P(MEO₂MA-co-OEGMA), designated as P(αClεCL-co-εCL)-g-P(MEO₂MA-co-OEGMA) have been prepared via a combination of ring-opening polymerization (ROP) and atom transfer radical polymerization (ATRP). The composition and structure of these copolymers were characterized by ¹H NMR and GPC analyses. The self-assembly behaviors of these amphiphilic graft copolymers were investigated by UV transmittance, a fluorescence probe method, dynamic light scattering (DLS) and transmission electron microscopy (TEM) analyses. The results showed that the graft copolymers exhibited the good solubility in water, and was given the low critical temperature (LCST) at 35(±1) °C, which closed to human physiological temperature. The critical micelle concentrations (CMC) of P(αClεCL-co-εCL)-g-P(MEO₂MA-co-OEGMA) in aqueous solution were investigated to be 2.0 × 10^?3, 9.1 × 10^?4 and 1.5 × 10^?3 mg·mL^?1, respectively. The copolymer could self-assemble into sphere-like aggregates in aqueous solution with diverse sizes when changing the environmental temperature. The vial inversion test demonstrated that the graft copolymers could trigger the sol-gel transition which also depended on the temperature.     

Sintering behavior,structure, and microwave properties of novel Li2xCu1-xMoO4 ceramics

In this study, we prepared a novel series of Li_2xCu_1-xMoO₄ (x = 0.02, 0.04, 0.06, 0.08, and 0.10) microwave ceramics. The dynamic sintering behavior, crystal phases, micro-morphologies, and dielectric properties of the samples were studied. The substitution of Li⁺ contributed to refining the crystal grain size, promoting the densification of microstructure, and enhancing the quality factor. Due to different valence substitutions, Cu⁺ ions were created, which were verified by X-ray photoelectron spectroscopy (XPS) and Raman experiments. In addition, the Raman shift, full width at half maximum (FWHM) value of the A_1g peak, and crystal microstrains were analyzed to gain a mechanistic understanding of the influence of structure on the dielectric properties. When x = 0.08, the Li_2xCu_1-xMoO₄ ceramic sintered at 675 °C exhibited optimal comprehensive properties with ε_r = 8.17, Qf = 68 476 GHz, and τ_f = ?25 ppm/°C, and good chemical stability between the ceramic and Al electrode was also achieved. These promising properties make Li_2xCu_1-xMoO₄ (x = 0.08) more suitable for ultra-low temperature co-fired ceramic (ULTCC) applications.     

Effect of hydrophobic polystyrene microphases on temperature-responsive behavior of poly(N-isopropylacrylamide) hydrogels

Reversible addition-fragmentation chain transfer polymerization was employed to prepare the crosslinked poly(N-isopropylacrylamide)-graft-polystyrene networks (PNIPAAm-g-PS). Due to the immiscibility of PNIPAAm with PS, the crosslinked PNIPAAm-g-PS copolymers displayed the microphase-separated morphology. While the PNIPAAm-g-PS copolymer networks were subjected to the swelling experiments, it is found that the PS block-containing PNIPAAm hydrogels significantly exhibited faster response to the external temperature changes according to swelling, deswelling, and reswelling experiments than the conventional PNIPAAm hydrogels. The improved thermo-responsive properties of hydrogels have been interpreted on the basis of the formation of the specific microphase-separated morphology in the hydrogels, i.e., the PS blocks pendent from the crosslinked PNIPAAm networks were self-assembled into the highly hydrophobic nanodomains, which behave as the microporogens and thus promote the contact of PNIPAAm chains and water. The self-organized morphology in the hydrogels was further confirmed by photon correlation spectroscopy (PCS). The PCS shows that the linear model block copolymers of PNIPAAm-g-PS networks were self-organized into micelle structures, i.e., the PS domains constitute the hydrophobic nanodomains in PNIPAAm-g-PS networks.     

Thermo-, and pH dual-responsive poly(N-vinylimidazole): Preparation,characterization and its switchable catalytic activity

A monomer, 2-(isobutyramido)-3-methylbutyl methacrylate (IMMA) was synthesized through a two-step reaction. When a few of IMMA (less than 4 mol%) was copolymerized with N-vinylimidazole (VIm) under free radical polymerization condition, water-soluble P(VIm-co-IMMA) copolymers were obtained. Their structural information was verified and interpreted from ¹H NMR, FTIR and GPC. Kinetic analyses from ¹H NMR demonstrated that one-batch addition of IMMA into the polymerization system led to an inhomogeneous distribution of IMMA units in the copolymers, whereas homogeneous distribution of IMMA units in the copolymers could be obtained through the portion-wise addition of IMMA monomer. The thermal properties of such copolymers were measured by DSC. Compared with PVIm homopolymer, the few IMMA units in the P(VIm-co-IMMA) copolymer had little influence on the T_g values. The obtained P(VIm-co-IMMA) copolymers were thermoresponsive in water, and their phase transition temperatures could be efficiently raised through reducing the IMMA content in the copolymers, raising the addition times of IMMA monomers or lowering the pH of media. Dynamic light scattering analysis showed that unlike the traditional thermoresponsive linear polymers, obvious size shrinkage around the phase transition temperature could not be observed in such P(VIm-co-IMMA) copolymers. Such copolymers could be used as smart organocatalysts in the hydrolysis of p-nitrophenyl acetate. Below the phase transition temperature the reaction rate followed the Arrhenius law, but above the phase transition temperature the reaction rate increased much slower than the prediction from the Arrhenius law. Moreover, the catalytic transition temperature could be tuned through utilizing the P(VIm-co-IMMA) copolymers with different phase transition temperature. The mechanism was discussed accordingly.     

Polystyrene/EVA melt blends compatibilized with EVA-graft-polystyrene

The influence of poly[(ethylene-co-vinyl acetate)-g-polystyrene] (EVA-g-PS) on the mechanical and morphological properties of polystyrene and the blends with EVA copolymers has been investigated. The melt blends have been performed in a twin-screw extruder. The addition of the graft copolymer enhances the mechanical properties and impact resistance of the PS matrix and PS/EVA (90 : 10 wt %) blends. Better results on impact strength and elongation at break have been achieved by using a EVA-g-PS graft copolymer with a higher EVA proportion by weight. This graft copolymer also contains a lower molecular weight of the PS-grafted segments than the PS matrix. Morphological studies by scanning electron microscopy revealed some interfacial adhesion between the components in the compatibilized polymer blends. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65: 2141–2149, 1997     

Synthesis and characterization of a novel graft copolymer with poly(n-octylallene-co-styrene) backbone and poly(?-caprolactone) side chain

A novel graft copolymer consisting of poly(n-octylallene-co-styrene) (PALST) as backbone and poly(?-caprolactone) (PCL) as side chains was synthesized with the combination of coordination copolymerization of n-octylallene and styrene and the ring-opening polymerization (ROP) of ?-caprolactone. Poly(n-octylallene-co-styrene) (PALST) backbone was prepared from the copolymerization of n-octylallene and styrene with high yield by using the coordination catalyst system composed of bis[N,N-(3,5-di-tert-butylsalicylidene)anilinato]titanium(IV) dichloride (Ti(Salen)₂Cl₂) and tri-isobutyl aluminum(Al(i-Bu)₃). The molar ratio of each segment in the copolymer, and the molecular weight of the copolymer as well as the microstructure of the copolymer could be adjusted by varying the feeding ratio of both styrene and n-octylallene. The hydroxyl functionalized copolymer PALST-OH was prepared by the reaction of mercaptoethanol with the pendant double bond of PALST in the presence of radical initiator azobisisbutyronitrile (AIBN). The target graft copolymer [poly(n-octylallene-co-styrene)-g-polycaprolactone] (PALST-g-PCL) was synthesized through a grafting-from strategy via the ring-opening polymerization using PALST-OH as macroinitiator and Sn(Oct)₂ as catalyst. Structures of resulting copolymer were characterized by means of gel permeation chromatography (GPC) with multi-angle laser light scattering (MALLS), ¹³C NMR, ¹H NMR, DSC, polarized optical microscope (POM) and contact angle measurements.