Anaerobic digestion of by-products of sugar beet and starch potato processing

Anaerobic digestion (AD) is a promising option for the environmentally friendly recycling of agricultural by-products. However, overloading of the digester with sugar, starch or protein might cause inhibition of the anaerobic processes. The aim of the present project was to investigate the AD of sugar beet, starch potato by-products and effect of pre-treatment by steam on methane yield of potatoes pulp. The investigated by-products have been: sugar beet pulp silage (SBP), sugar beet tail silage (SBT), potato pulp (PP), potato peel pulp (PPP) and potato fruit water (PFW). All by-products were digested in 1 l eudiometer-batch digesters at 37.5 °C during 28–38 days. The specific methane yields of SBP and SBT were 430 and 481 l_N kg^?1 volatile solids (VS), respectively. The specific methane yields of PP, PPP and PFW were 332, 377 and 323 l_N (kg VS)^?1. A steam pre-treatment significantly increased the specific methane yield of PP up to 373 l_N (kg VS)^?1.     

Characterization of Spartina alterniflora as feedstock for anaerobic digestion

Smooth cordgrass (Spartina alterniflora), a saltmarsh plant with high production, was characterized for its potential for use as feedstock for anaerobic digestion processes. The anaerobic digestibility and biogas yield of S. alterniflora were evaluated by anaerobic batch digestion experiments performed at 35 ± 1 °C at initial volatile solids (VS) of 6%. The nutrient content analysis indicated that S. alterniflora contained the required nutrition for anaerobic microorganisms, but its high C/N of 58.8, high K and Na contents of 8.1, 22.7 g kg^?1, respectively, may be disadvantageous to its anaerobic digestion. The cumulative biogas yield was determined to be 358 L kg^?1 VS and the biodegradation efficiency was 45% after 60 days of digestion. The methane content of biogas increased from 53% on day 3 to around 62% after 13 days of digestion. The changes of volatile fatty acids (VFAs) indicated that the acidification of S. alterniflora was propionate-type fermentation with proportion of acetate and propionate ranging from 54.8% to 98.4%, and the hydrolysis of lignocellulose was the rate-limiting step for its anaerobic digestion. The analysis of cations suggested that K⁺ and Mg²⁺, with the maximum concentration of 1.35 and 0.43 g L^?1 in fermentation liquor, respectively, could be inhibitory to the anaerobic digestion of S. alterniflora. It is concluded that S. alterniflora can be transformed into clean energy by anaerobic digestion and the high contents of K, Na, Ca and Mg may be the inhibitory factors when S. alterniflora is digested by continuous or semi-continuous anaerobic process.     

Biomass estimates,characteristics, biochemical methane potential,kinetics and energy flow from Jatropha curcus on dry lands

In this study, we examined the production of Jatropha curcus plants on 1 ha of rain fed dry lands. All of the plant components that would result from plantation tending, fruit harvesting and processing were sampled for their yield and chemical composition, and then subjected to the biochemical methane potential (BMP) assay. The component parts exhibited significant variation in BMP which was reflected in their ultimate methane yield which ranged from 0.08 to 0.97 L g^?1 VS added, and their first order kinetics which ranged from 0.07 to 0.14 d^?1. We examined two integrated utilization schemes: the first which converted plant prunings, fruit hulls and de-oiled seed cake to methane, and the oil to fatty acid methyl-ester (FAME); the second was to convert the seeds, plant prunings and fruit hulls entirely to methane. The basis for the plantation was, a density of 4444 plant ha^?1 (1.5 m × 1.5 m spacing), with a seed yield of 0.911 kg TS plant^?1 (1 kg total weight) with an oil content of 35% providing an annual oil yield of 1.42 t y^?1. The corresponding yields of pruned leaves, fruit hulls and de-oiled cake are 0.97, 1.0, and 2.35 t VS ha y^?1, respectively. An integrated scheme of producing biogas by means of anaerobic digestion of the latter components and oil for biodiesel would produce 90 GJ ha^?1 y^?1 in total with the oil being 54 GJ. The alternative biogas only option which would convert the seed oil into methane instead of biodiesel would produce 97 GJ ha^?1 y^?1.     

Low temperature anaerobic digestion of mixtures of llama,cow and sheep manure for improved methane production

Biogas production in anaerobic digestion in farm-scale units is typically performed under mesophilic conditions when used for producing domestic fuel and stabilizing animal waste for the use of digested manure as a fertilizer. Previous studies on the digestion of llama and cow manure have shown the feasibility of producing biogas under altiplano conditions (low pressure and low temperature) and of llama manure as a promising feedstock. The present study concerns the utilization of various mixtures of feedstocks from the Bolivian altiplano under low temperature conditions (18–25 °C). Laboratory scale experiments were performed on the digestion of mixtures of llama, sheep and cow manure in a semi-continuous process using ten 2-L stainless steel digesters to determine the effects of organic loading rate (OLR) and the feed composition. The semi-continuous operation of mixture of llama–cow–sheep manure proved to be a reliable system, which could be operated with good stability. The results suggest that in a system digesting a mixture of llama-cow-sheep manure at low temperature (18–25 °C) the maximum OLR value is between 4 and 6 kg VS m³ d^?1. The methane yields obtained in the mixture experiments were in the range 0.07–0.14 m³ kg^?1 VS added, with a methane concentration in the gas of between 47 and 55%.     

Laboratory investigations on continuous bio-methanization of energy crops as mono-substrate without supplementation

Continuous bio-methanization of an energy crop, namely the beet silage, was investigated in this laboratory-scale work as mono-substrate, using a mesophilic biogas digester controlled by a fuzzy logic control (FLC) technique and without using any supplementing or buffering agent, despite the low pH of the substrate around 3.80. The temperature, pH, redox potential (ORP), daily biogas production and composition of digester biogas were continuously measured online. During the operation, the hydraulic retention time (HRT) varied between 24.8 and 9 days, as the organic loading rate (OLR) ranged from 2.6 to 4.7 g L^?1 d^?1. The average pH, specific gas production rate (spec. GPR) and volumetric gas production rate (vol. GPR) were determined to be 7.12, 0.31 L g VS^?1 d^?1 and 1.084 L L^?1 d^?1, respectively. The average methane (CH₄) content of digester biogas was about 56%. The FLC technique, which was developed at HAW Hamburg for anaerobic conversion of acidic energy crops to methane, determined the daily feeding volume (～ OLR/HRT) for the biogas digester, depending on the feedback from online pH and methane measurements, and on the calculation of the spec. GPR. The spec. GPR was calculated by the corrected daily biogas production. Through online monitoring of pH, biogas production rate and composition, and by use of the FLC technique, the acidic beet silage could continuously be converted to biogas, without using manure or any other kind of buffering or supplementing agent(s). The lab-scale anaerobic biogas digester performed stable and safe, without encountering any problems of instability, as indicated by an adequate amount of buffering capacity, a VFA content below 0.5 g L^?1 and a neutral pH range throughout the study.     

Hydrogen production for fuel cells by autothermal reforming of methane over sulfide nickel catalyst on a gamma alumina support

Experimental and modelling studies have been conducted on catalytic autothermal reforming (ATR) of methane for hydrogen production over a sulfide nickel catalyst on a gamma alumina support. The experiments are performed with different feedstock under thermally neutral conditions. The results show that the performance of the reformer is dependent on the molar air-to-fuel ratio (A/F), the molar water-to-fuel ratio (W/F) and the flowrate of the feedstock mixture. The optimum conditions for high methane conversion and high hydrogen yield are A/F = 3–3.5, W/F = 2–2.5 and a fuel flowrate below 120–250 l h⁻¹. Under these conditions, a methane conversion of 95–99% and a hydrogen yield of 39–41% on a dry basis can be achieved and 1 mole of methane can produce 1.8 moles of hydrogen at an equilibrium reactor temperature of not exceeding 850 °C.A two-dimensional reactor model is developed to simulate the conversion behaviour of the reactor for further study of the reforming process. The model includes all aspects of the major chemical kinetics and the heat and mass transfer phenomena in the reactor. The predicted results are successfully validated with experimental data.     

Anaerobic digestion of slaughterhouse by-products

Anaerobic digestion of animal by-products was investigated in batch and semi-continuously fed, reactor experiments at 55 °C and for some experiments also at 37 °C. Separate or mixed by-products from pigs were tested. The methane potential measured by batch assays for meat- and bone flour, fat, blood, hair, meat, ribs, raw waste were: 225, 497, 487, 561, 582, 575, 359, 619 dm³ kg^?1 respectively, corresponding to 50–100% of the calculated theoretical methane potential. Dilution of the by-products had a positive effect on the specific methane yield with the highest dilutions giving the best results. High concentrations of long-chain fatty acids and ammonia in the by-products were found to inhibit the biogas process at concentrations higher than 5 g lipids dm^?3 and 7 g N dm^?3 respectively. Pretreatment (pasteurization: 70 °C, sterilization: 133 °C, and alkali hydrolysis (NaOH) had no effect on achieved methane yields. Mesophilic digestion was more stable than thermophilic digestion, and higher methane yield was noticed at high waste concentrations. The lower yield at thermophilic temperature and high waste concentration was due to ammonia inhibition. Co-digestion of 5% pork by-products mixed with pig manure at 37 °C showed 40% higher methane production compared to digestion of manure alone.     

Effects of volatile fatty acid concentrations on methane yield and methanogenic bacteria

Volatile fatty acids (VFAs) are important mid-products in the production of methane, and their concentrations affect the efficiency of fermentation. However, their effects on methane yield and methanogenic bacteria growth have been less extensively studied. To address these effects, acetic acid, propionic acid, butyric acid and ethanol were used as substrates and an L₉(3⁴) orthogonal table was adopted to design anaerobic digestion tests. When the highest concentrations of ethanol, acetic acid and butyric acid were 2400, 2400 and 1800 mg L^?1, respectively, there was no significant inhibition of the activity of methanogenic bacteria. However, when the propionic acid concentration was increased to 900 mg L^?1, significant inhibition appeared, the bacteria concentration decreased from 6 × 10⁷ to 0.6–1 × 10⁷ ml^?1 and their activity would not reconvert. These effects resulted in the accumulation of ethanol and VFAs, and the total methane yield consequently became very low (<321 ml). The original propionic acid concentration had a significant inhibitory effect on methanogenic bacteria growth (P < 0.01). An optimization analysis showed that ethanol, acetic acid, propionic acid and butyric acid at concentrations of 1600, 1600, 300 and 1800 mg L^?1, respectively, led to the maximum accumulative methane yield of 1620 ml and the maximum methanogenic bacteria concentration of 7.3 × 10⁸ ml^?1.     

Hydrothermal catalytic gasification of fermentation residues from a biogas plant

Biogas plants, increasing in number, produce a stream of fermentation residue with high organic content, providing an energy source which is by now mostly unused. We tested this biomass as a potential feedstock for catalytic gasification in supercritical water (T ≥ 374 °C, p ≥ 22 MPa) for methane production using a batch reactor system. The coke formation tendency during the heat-up phase was evaluated as well as the cleavage of biomass-bound sulfur with respect to its removal from the process as a salt. We found that sulfur is not sufficiently released from the biomass during heating up to a temperature of 410 °C. Addition of alkali salts improved the liquefaction of fermentation residues with a low content of minerals, probably by buffering the pH. We found a deactivation of the carbon-supported ruthenium catalyst at low catalyst-to-biomass loadings, which we attribute to sulfur poisoning and fouling in accordance with the composition of the fermentation residue. A temperature of 400 °C was found to maximize the methane yield. A residence time dependent biomass to catalyst ratio of 0.45 g g⁻¹ h⁻¹ was found to result in nearly full conversion with the Ru/C catalyst. A Ru/ZrO₂ catalyst, tested under similar conditions, was less active.     

Semi-continuous co-digestion of solid slaughterhouse waste, manure, and fruit and vegetable waste

The potential of semi-continuous mesophilic anaerobic digestion (AD) for the treatment of solid slaughterhouse waste, fruit-vegetable wastes, and manure in a co-digestion process has been experimentally evaluated. A study was made at laboratory scale using four 2 L reactors working semi-continuously at 35 °C. The effect of the organic loading rate (OLR) was initially examined (using equal proportion of the three components on a volatile solids, VS, basis). Anaerobic co-digestion with OLRs in the range 0.3–1.3 kg VS m⁻³ d⁻¹ resulted in methane yields of 0.3 m³ kg⁻¹ VS added, with a methane content in the biogas of 54–56%. However, at a further increased loading, the biogas production decreased and there was a reduction in the methane yield indicating organic overload or insufficient buffering capacity in the digester.In the second part of the investigation, co-digestion was studied in a mixture experiment using 10 different feed compositions. The digestion of mixed substrates was in all cases better than that of the pure substrates, with the exception of the mixture of equal amounts of (VS/VS) solid cattle–swine slaughterhouse waste (SCSSW) with fruit and vegetable waste (FVW). For all other mixtures, the steady-state biogas production for the mixture was in the range 1.1–1.6 L d⁻¹, with a methane content of 50–57% after 60 days of operation. The methane yields were in the range 0.27–0.35 m³ kg⁻¹ VS added and VS reductions of more than 50% and up to 67% were obtained.     

Nymphoides peltatum as a novel feedstock for biomethane production via anaerobic co-digestion with waste sludge

Nymphoides peltatum (NP) is exploited as a novel feedstock for biomethane production via anaerobic co-digestion with waste sludge (WS). Batch experiments are conducted under mesophilic condition at NP/WS of 1/3, 2/2, 3/1, 0/4 and 4/0 based on volatile solids (VS). Prior to anaerobic digestion (AD), NP undergoes only natural drying and grinding. The maximum net cumulative methane yield (265.16 mL CH₄·g VS_added^?1) and the highest gross VS removal rate (56.12%) are obtained at NP/WS of 1/3. The kinetic analysis by the modified Gompertz model fit hinted that 28 days is adequate for methane recovery and co-digestion significantly accelerates the digestion rate. Synergetic effect is corroborated to exist in co-digestion due to amiable conditions in term of total ammonia nitrogen, free ammonia, pH, volatile fatty acids and total alkalinity. High-throughput 16S rRNA pyrosequencing reveals that Bacteroidetes, Firmicutes, Methanosarcina and Methanosaeta are conducive to AD of NP.     

Enhancement of methane production from barley waste

Two different approaches were attempted to try and enhance methane production from an industrial waste composed of 100% barley, which results from production of instant coffee substitutes. In previous work, this waste was co-digested with an excess of activated sludge produced in the wastewater treatment plant located in same industrial unit, resulting in a very poor methane yield (25 LCH_4(STP)/kgVS_initial), and low reductions in total solids (31%) and in volatile solids (40%).When the barley waste (BW) was subjected to alkaline hydrolysis pre-treatment before co-digestion with activated sludge, the methane production increased to 222 LCH_4(STP)/kgVS_initial and the total and volatile solids reductions increased to 67% and 84%, respectively.The second approach, followed in the present work, consisted of co-digestion with kitchen waste (40% BW, 60% kitchen waste). The methane production was 363 LCH_4(STP)/kgVS_initial and the total and volatile solids reductions were 61% and 67%, respectively.     

Generation of biogas using crude glycerin from biodiesel production as a supplement to cattle slurry

The influence of crude glycerin on biogas production and methane content of the produced biogas was studied, when added to cattle slurry. The experimental design consisted of 5% wt (Gli 5), 10% wt (Gli 10), and 15% wt (Gli 15) of crude glycerin added to cattle slurry, and one control digester without addition of crude glycerin. Anaerobic digestion was carried out in 4 laboratory size CSTR-type biogas digesters with a working volume of 3 L, in semi-continuous regime at mesophilic conditions, over a period of 10 weeks. The highest biogas yields (825.3 mL g^?1 and 825.7 mL g^?1, respectively) relative to mass of volatile compounds added, were produced by the treatments Gli 5 and Gli 10. The control treatment produced 268.6 mL g^?1, whereas the treatment Gli 15 produced 387.9 mL g^?1. This low value was due to the breakdown of the process. Compared to the control, methane contents was increased by 9.5%, 14.3%, and 14.6%, respectively, for the treatments Gli 5, Gli 10, and Gli 15.     

Isolation and characterization of two soil derived yeasts for bioethanol production on Cassava starch

Two ethanol-producing yeast strains, CHY1011 and CHFY0901 were isolated from soil in South Korea using an enrichment technique in a yeast peptone dextrose medium supplemented with 5% (w v^?1) ethanol at 30 °C. The phenotypic and physiological characteristics, as well as molecular phylogenetic analysis based on the D1/D2 domains of the large subunit (26S) rRNA gene and the internally transcribed spacer (ITS) 1 + 2 regions suggested that they were novel strains of Saccharomyces cerevisiae. During shaking flask cultivation, the highest ethanol productivity and theoretical yield of S. cerevisiae CHY1011 in YPD media containing 9.5% total sugars was 1.06 ± 0.02 g l^?1 h^?1 and 95.5 ± 1.2%, respectively, while those for S. cerevisiae CHFY0901 were 0.97 ± 0.03 g l^?1 h^?1 and 91.81 ± 2.2%, respectively. Simultaneous saccharification and fermentation for ethanol production was carried out using liquefied cassava (Manihot esculenta) starch in a 5 l lab-scale jar fermenter at 32 °C for 66 h with an agitation speed of 2 Hz. Under these conditions, S. cerevisiae CHY1011 and CHFY0901 yielded a final ethanol concentration of 89.1 ± 0.87 g l^?1 and 83.8 ± 1.11 g l^?1, a maximum ethanol productivity of 2.10 ± 0.02 g l^?1 h^?1 and 1.88 ± 0.01 g l^?1 h^?1, and a theoretical yield of 93.5 ± 1.4% and 91.3 ± 1.1%, respectively. These results suggest that S. cerevisiae CHY1011 and CHFY0901 have potential use in industrial bioethanol fermentation processes.     

Effect of biomass species and plant size on cellulosic ethanol: A comparative process and economic analysis

The effects of five different biomass species and their chemical composition on the overall process efficiency and economic performance considering feedstock availability and feedstock costs to manufacture ethanol from lignocellulose were studied. First is a comparison of ethanol production and excess electricity generated between different biomass species. Results show that, at the same feedstock rate of 2000 Mg day^?1, aspen wood has larger ethanol production than switchgrass, hybrid poplar and corn stover, while the excess electricity generated is as follows in increasing order: aspen < corn stover < hybrid poplar/switchgrass. Second, our results show that the ethanol production is largely linear with holocellulose (cellulose plus hemicellulose) composition of the various biomass species. However, the relationship between excess electricity generated and non-holocellulose combustible component is nonlinear. Last, on environmental performance, it is found that the water losses per unit ethanol production are in the following order: aspen wood < corn stover < hybrid poplar < switchgrass. While corn stover is a potential feedstock to produce cellulosic ethanol with the lowest ethanol production cost at the present time, hybrid poplar and switchgrass are the two promising future energy crops.The effects of plant size analysis showed that the estimated feedstock delivered costs, ethanol production, excess electricity generated and solid and gaseous waste emissions all increase with plant size for the various biomass species. The ethanol production costs decrease with the increase in plant size with optimal plant sizes for corn stover in the range from 2000 dry Mg day^?1 to 4000 dry Mg day^?1.     

Economics of switchgrass and miscanthus relative to coal as feedstock for generating electricity

Switchgrass (Panicum virgatum) serves as a model dedicated energy crop in the U.S.A. Miscanthus (Miscanthus x giganteus) has served a similar role in Europe. This study was conducted to determine the most economical species, harvest frequency, and carbon tax required for either of the two candidate feedstocks to be an economically viable alternative for cofiring with coal for electricity generation. Biomass yield and energy content data were obtained from a field experiment conducted near Stillwater, Oklahoma, U.S.A., in which both grasses were established in 2002. Plots were split to enable two harvest treatments (once and twice yr^?1). The switchgrass variety ‘Alamo’, with a single annual post-senescence harvest, produced more biomass (15.87 Mg ha^?1 yr^?1) than miscanthus (12.39 Mg ha^?1 yr^?1) and more energy (249.6 million kJ ha^?1 yr^?1 versus 199.7 million kJ ha^?1 yr^?1 for miscanthus). For the average yields obtained, the estimated cost to produce and deliver biomass an average distance of 50 km was $43.9 Mg^?1 for switchgrass and $51.7 Mg^?1 for miscanthus. Given a delivered coal price of $39.76 Mg^?1 and average energy content, a carbon tax of $7 Mg^?1 CO₂ would be required for switchgrass to be economically competitive. For the location and the environmental conditions that prevailed during the experiment, switchgrass with one harvest per year produced greater yields at a lower cost than miscanthus. In the absence of government intervention such as requiring biomass use or instituting a carbon tax, biomass is not an economically competitive feedstock for electricity generation in the region studied.     

Co-digestion of poultry manure and residues from enzymatic saccharification and dewatering of sugar beet pulp

This study investigates the co-digestion of poultry manure (PM) with sugar beet pulp residues (SBPR) obtained from saccharification and dewatering of sugar beet pulp. The laboratory-scale experiments were conducted under batch and semi-continuous conditions at mesophilic temperatures (35 °C). Batch tests gave specific biogas and methane yields of 590 dm³/kgVS_fed and 423 dm³CH₄/kgVS_fed, respectively for SBPR, whereas the corresponding values for PM were 434 dm³/kgVS_fed and 300 dm³CH₄/kgVS_fed. The co-digestion of PM with SBPR was found to increase biogas and methane yields compared to the manure alone. In semi-continuous reactor experiments, the highest methane yield of 346 dm³ CH₄/kgVS_fed was achieved for the mixture containing poultry manure with 50% SBPR (weight basis) and a solids retention time (SRT) of 20 days. However, when poultry manure was digested as a sole feedstock, the biogas production was inhibited by ammonia, whereas the co-digestion of PM with 25% SBPR was slightly affected by volatile fatty acids, which concentrations exceeded 4000 g/m³.     

Bioethanol production by a flocculent hybrid,CHFY0321 obtained by protoplast fusion between Saccharomyces cerevisiae and Saccharomyces bayanus

Fusion hybrid yeast, CHFY0321, was obtained by protoplast fusion between non-flocculent-high ethanol fermentative Saccharomyces cerevisiae CHY1011 and flocculent-low ethanol fermentative Saccharomyces bayanus KCCM12633. The hybrid yeast was used together with the parental strains to examine ethanol production in batch fermentation. Under the conditions tested, the fusion hybrid CHFY0321 flocculated to the highest degree and had the capacity to ferment well at pH 4.5 and 32 °C. Simultaneous saccharification and fermentation for ethanol production was carried out using a cassava (Manihot esculenta) powder hydrolysate medium containing 19.5% (w v^?1) total sugar in a 5 l lab scale jar fermenter at 32 °C for 65 h with an agitation speed of 2 Hz. Under these conditions, CHFY0321 showed the highest flocculating ability and the best fermentation efficiency for ethanol production compared with those of the wild-type parent strains. CHFY0321 gave a final ethanol concentration of 89.8 ± 0.13 g l^?1, a volumetric ethanol productivity of 1.38 ± 0.13 g l^?1 h^?1, and a theoretical yield of 94.2 ± 1.58%. These results suggest that CHFY0321 exhibited the fermentation characteristics of S. cerevisiae CHY1011 and the flocculent ability of S. bayanus KCCM12633. Therefore, the strong highly flocculent ethanol fermentative CHFY0321 has potential for improving biotechnological ethanol fermentation processes.     

A techno-economic evaluation of the effects of centralized cellulosic ethanol and co-products refinery options with sugarcane mill clustering

This work compares the calculated techno-economic performance for thermochemical and biochemical conversion of sugarcane residues, considering future conversion plants adjacent to sugarcane mills in Brazil. Process models developed by the National Renewable Energy Laboratory were adapted to reflect the Brazilian feedstock composition and used to estimate the cost and performance of these two conversion technologies. Models assumed that surplus bagasse from the mill would be used as the feedstock for conversion, while cane trash collected from the field would be used as supplementary fuel at the mill. The integration of the conversion technology to the mill enabled an additional ethanol production of 0.033 m³ per tonne of cane for the biochemical process and 0.025 m³ t^?1 of cane plus 0.004 m³ t^?1 of cane of higher alcohols for the thermochemical process. For both cases, electricity is an important co-product for the biorefinery, but especially for biochemical conversion, with surpluses of about 50 kWh t^?1 of cane. The economic performance of the two technologies is quite similar in terms of the minimum ethanol selling price (MESP), at 318 $ m^?3 (United States 2007 dollars) for biochemical conversion and 329 $ m^?3 for thermochemical conversion.     

Production of butanol (a biofuel) from agricultural residues: Part I – Use of barley straw hydrolysate

Fermentation of dilute sulfuric acid barley straw hydrolysate (BSH; undiluted/untreated) by Clostridium beijerinckii P260 resulted in the production of 7.09 gL^?1 ABE (acetone butanol ethanol), an ABE yield of 0.33, and productivity of 0.10 gL^?1 h^?1. This level of ABE is much less than that observed in a control experiment (21.06 gL^?1) where glucose (initial concentration 60 gL^?1) was used as a substrate. In the control experiment, an ABE yield of 0.41 and productivity of 0.31 gL^?1 h^?1 were observed. This comparison suggested that BSH is toxic to the culture. To reduce this potential toxicity effect, BSH was treated with lime [Ca(OH)₂] followed by fermentation. The treated BSH resulted in a successful fermentation and ABE concentration of 26.64 gL^?1 was achieved. This was superior to both glucose and untreated BSH (initial sugar 60 gL^?1) fermentations. In this fermentation, an ABE yield of 0.43 and productivity of 0.39 gL^?1 h^?1 (390% of untreated/undiluted BSH) was obtained. It should be noted that using lime treated BSH, a specific productivity of 0.55 h^?1 was obtained as compared to 0.12 h^?1 in the control fermentation suggesting that more carbon was directed to product formation.