Surface and mechanical properties of hydrophobic silica contained hybrid films of waterborne polyurethane and fluorinated polymethacrylate

The surface and mechanical properties of hybrid films of waterborne polyurethane (WPU) and fluorinated polymethacrylate (FPMA), and high-hydrophobic silica (SiO₂) contained hybrid films of FPMA/WPU were investigated. X-ray photoelectron spectroscopy confirmed that the surfaces of hybrid films exhibited notable fluorine enrichment. Scanning electron microscopy observation demonstrated that micro-scale rough structures consisted of sub-micro papillae and micro-scale wrinkles formed on the surfaces of FPMA/WPU. This was attributed to the enhanced phase separation of WPU and the incompatibility of low-surface-energy FPMA and WPU. Colloidal SiO₂ was modified by polydimethylsiloxane and the modified SiO₂ was reactive and high-hydrophobic. After the addition of reactive SiO₂, the rough structures became micro-scale striped wrinkles studded with nano- and sub-micro papillae formed by the high-hydrophobic SiO₂. The combination of the fluorine enrichment and the rough structures accounted for the high hydrophobic FPMA/WPU film and superhydrophobic SiO₂/FPMA/WPU film.     

Preparation and characterization of waterborne polyurethane/silica hybrid dispersions from castor oil polyols obtained by glycolysis poly(ethylene terephthalate) waste

Castor oil polyols (COLs) have been synthesized from glycolyzed oligoester polyol in order to produce waterborne polyurethane (WPU)/silica hybrid dispersions. Soft drinks poly(ethylene terephthalate) (PET) bottles were depolymerized by glycolysis with different molar ratio of poly(ethylene glycol) ( PEG 400), in the presence of zinc acetate as catalyst. The obtained glycolyzed products were reacted with castor oil (CO) to attain castor oil polyols by the process of transesterification. Five castor oil polyols were used with hydroxyl values of 255, 275, 326, 366 and 426 mg KOH g⁻¹. Several castor oil-based, polyurethane/silica hybrid dispersions having soft segment content of 39.6% to 28.2% and two concentrations of SiO₂ nanoparticles (0.5 and 1.0) have been prepared.The incorporation effect of SiO₂ nanoparticles into the PU matrix and the hydroxyl functionality of the COLs on the thermal and mechanical properties of resulting polyurethane films has been examined by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermal gravimetric analysis (TG) and measurement of the mechanical properties. The degree of phase separation (DPS) between oxide nanoparticles and hard segment, and particle size in the polyurethane, depends to some extent on nanosilica content and the hydroxyl functionality of the polyols employed in the polyurethane preparation process.Thermal stability of obtained hybrid materials depends on the hydroxyl functionality of the COLs and nanosilica content. The T_10% and T_50% (the temperature where 10 and 50% weight loss occurred) of WPU films decreased with the rise of OH functionality of castor oil polyols, caused by the increase of hard segment content. Glass transition temperature increased with increasing OH functionality and SiO₂ content. The hardness, adhesion and gloss quality of the polyurethane films were also determined with a view to assessing the effect of mole ratios of PET to glycol in glycolyzed products, the hydroxyl functionality and the SiO₂ content.     

Dielectric and conduction properties of polyimide/silica nano‐hybrid films

Dielectric and conduction properties of polyimide/silica nano‐hybrid films were investigated with the silica content and the testing frequency, using a small electrode system. The hybrid films were prepared through sol‐gel process and thermal imidization, by using pyromellitic dianhydride and 4,4′‐oxydianiline as polyimide precursors, and tetraethoxysilane and methyltriethoxysilane as silica precursors. The dielectric coefficient of PI/SiO₂ films was monotonically increased with increasing silica content, and decreased with increasing testing frequency. The dielectric loss of PI/SiO₂ films had no obvious changes with increasing silica content, but monotonically increased with increasing testing frequency. These can be contributed to the different quantity and migration chunnels of current carriers, which were mainly influenced by a few of complicated factors. There were remarkable differences between conduction property of PI/TEOS‐SiO₂ films and PI/MTEOS‐SiO₂ films because of the different size and dispersion status of silica particles in the polyimide matrix. POLYM. COMPOS., 2008. © 2008 Society of Plastics Engineers     

Preparation and properties of nylon 6/carboxylic silica nanocomposites via in situ polymerization

Nylon 6/carboxylic acid‐functionalized silica nanoparticles (SiO₂‐COOH) nanocomposites were prepared by in situ polymerization of caprolactam in the presence of SiO₂‐COOH. The aim of this work was to study the effect of carboxylic silica on the properties of the nylon 6 through the interfacial interactions between the SiO₂‐COOH nanoparticles and the nylon 6 matrix. For comparison, pure nylon 6, nylon 6/SiO₂ (unmodified) and nylon 6/amino‐functionalized SiO₂ (SiO₂‐NH₂) were also prepared via the same method. Fourier transform infrared spectrometer (FTIR) spectroscopy was used to evaluate the structure of SiO₂‐COOH and nylon 6/SiO₂‐COOH. The results from thermal gravimetric analysis (TGA) indicated that decomposition temperatures of nylon 6/SiO₂‐COOH nanocomposites at the 5 wt % of the total weight loss were higher than the pure nylon 6. Differential scanning calorimeter (DSC) studies showed that the melting point (T_m) and degree of crystallinity (X_c) of nylon 6/SiO₂‐COOH were lower than the pure nylon 6. Mechanical properties results of the nanocomposites showed that nylon 6 with incorporation of SiO₂‐COOH had better mechanical properties than that of pure nylon 6, nylon 6/SiO₂, and nylon 6/SiO₂‐NH₂. The morphology of SiO₂, SiO₂‐NH₂, and SiO₂‐COOH nanoparticles in nylon 6 matrix was observed using SEM measurements. The results revealed that the dispersion of SiO₂‐COOH nanoparticles in nylon 6 matrix was better than SiO₂ and SiO₂‐NH₂ nanoparticles. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Polyimide‐silica nanocomposites exhibiting low thermal expansion coefficient and water absorption from surface‐modified silica

In this study, a commercially available nano‐sized silica (SiO₂) was surface‐modified via esterification with oleic acid (OA), a relatively inexpensive and hydrophobic modifier, and characterized by FTIR, NMR, SEM, EDS, and TGA measurements. Various amounts of the surface‐modified silica nanoparticles (SiO₂‐OA) were dispersed in a poly(amic acid), which were then cyclized at high temperatures to form a series of PI/SiO₂‐OA nanocomposite films (PISA). The effect of the addition of the SiO₂‐OA nanoparticles on the properties of the as‐prepared polyimide nanocomposite was studied. The results indicated that, comparing with pure PI and PI/pristine‐SiO₂ composite film (PISI), the as‐prepared PISA films had enhanced dynamic mechanical properties and thermal stability, as well as reduced water absorption and thermal expansion. The as‐prepared PI/SiO₂‐OA nanocomposites have potential for applications in high performance microelectronic devices. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104, 4096–4105, 2007     

Preparation and performance of oleylamine modified silica-reinforced natural rubber composites

Oleylamine (OA) modified silica (SiO₂-g-OA) was prepared using γ-(2,3-epoxypropoxy) propytrimethoxysilane (KH560) and OA, silica/natural rubber (NR) and SiO₂-g-OA/NR composites were prepared by mechanical blending in an internal mixer, and SiO₂-g-OA was characterized by Fourier transform infrared spectroscopy, thermal gravimetric analyzer, and contact angle analyzer. The mechanical properties, abrasion resistance, curing characteristics, Payne effect, and morphology of silica/NR and SiO₂-g-OA /NR composites were investigated using universal testing machine, Akron abrasion tester, rubber processing analyzer, and scanning electron microscope, respectively. The results showed that SiO₂-g-OA became more hydrophobic and had better compatibility with NR. Moreover, SiO₂-g-OA/NR had weaker Payne effect, better vulcanization performance, and more excellent mechanical properties. As the content of filler was more than 30 phr, SiO₂-g-OA/NR had lower rolling resistance and higher wet skid resistance. Compared with silica modified by other coupling agents, SiO₂-g-OA had the best reinforcement effect on NR.     

Preparation and characterization of silica/polyimide nanocomposite films based on water‐soluble poly(amic acid) ammonium salt

In this article, a series of new silica/polyimide (SiO₂/PI) nanocomposite films with high dielectric constant (>4.0), low dielectric loss (<0.0325), high breakdown strength (288.8 kV mm⁻¹), and high volume resistivity (2.498 × 10¹⁴ Ω m) were prepared by the hydrolysis of tetraethyl orthosilicate in water‐soluble poly(amic acid) ammonium salt (PAAS). The chemical structure of nanocomposite films compared with the traditional pure PI was confirmed by Fourier transform infrared spectroscopy and X‐ray diffraction patterns. The results indicated that both the PAAS and the polyamide acid (PAA) material were effectively converted into the corresponding PI material through the thermal imidization and the amorphous SiO₂ was embedded in the nanocomposite films without structural changes. Thermal stability of the nanocomposite films was increased though mechanical property was generally decreased with increasing the mass fraction of SiO₂. All the nanocomposite films exhibited an almost single‐step thermal decomposition behavior and the average decomposition temperature was about 615°C. It was concluded that the effective dispersion of SiO₂ particles in PI matrix vigorously improved the comprehensive performance of the SiO₂/PI nanocomposite films and expanded their applications in the electronic and environment‐friendly industries. POLYM. COMPOS., 38:774–781, 2017. © 2015 Society of Plastics Engineers     

Preparation and antibacterial activity of Ag/SiO2 thin film on glazed ceramic tiles by sol–gel method

In the present study, silver-doped silica thin films on glazed surface of ceramic tiles were well prepared by sol–gel method to achieve antibacterial activity. Thermal treatment was done in the air at 1100 °C for two hours. The Ag/SiO₂ thin films were investigated through Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X-ray diffraction (XRD) and wavelength dispersive spectrometry (WDS). Atomic absorption spectroscopy (AAS) was used for the quantitative determination of the silver ion concentration being released from Ag/SiO₂ films over a 24 day period. The antibacterial effects of Ag/SiO₂ thin films against Escherichia coli and Staphylococcus aureus were also examined. From the analysis results, it was found that high temperature treated coating consists of two phases of SiO₂ and Ag based on the trapping of the Ag phase in the silica matrix. The presence of Ag elements on the surface of the coated tiles, were also observed. Thermal treatment at high temperatures caused sharp XRD peaks and high crystallinity in this system. Ag⁺ ions were released constantly and the mean release rate (±SD) was 0.104 ±0.01 μg/ml during 24 days. Coating films exhibited an excellent antibacterial performance against both bacterium.     

Synthesis,analysis and characterization of ordered mesoporous TiO2/SBA-15 matrix: Effect of calcination temperature

Mesoporous TiO₂/SBA-15 matrix was prepared by the sol–gel synthesis of TiO₂ in previously prepared SBA-15 particles. Nonionic surfactant was used as liquid template and Na₂SiO₄ as SiO₂ precursor for the synthesis of mesoporous silica SBA-15 with high specific surface area. Different calcination temperature was used for the synthesis and analysis of TiO₂/SBA-15 matrix. The synthesized titania/silica composites were characterized by X-ray diffraction, FTIR, TEM, UV–vis spectroscopy, etc. TEM micrographs showed titania is successfully embedded in SBA-15 channel. Different calcination temperature indicates different size of particle formation and different photocatalytic properties. The activity test indicated that TiO₂/SBA-15 composite prepared by this method had better photocatalytic performance than pure TiO₂. The preparation method and the textural characteristics of mesoporous materials have great influence for the photocatalytic activity.     

Sol–gel-processed silica/polydimethylsiloxane/calcium xerogels as polymeric matrices for Metronidazole delivery system

Silica, silica/polydimethylsiloxane and silica/polydimethylsiloxane/calcium xerogels were examined as polymeric carriers for the controlled release of drug—Metronidazole. Characterization assays comprised analysis of the matrix by Fourier transform infrared spectroscopy (FTIR), determining the specific surface area of solids (BET) and scanning electron microscope (SEM) techniques and further monitoring in the ultraviolet and visible light regions (UV–Vis) of the in vitro release of the drug over time. Using tetramethoxysilane (TMOS) as a precursor of silica matrix and polydimethylsiloxane (PDMS) and calcium ions as additives, xerogels with different morphology and physical properties were obtained. The applied modifications diminished the porosity and hydrophilicity of the silica matrix as well as reduced the release of drug. Based on the presented results of this study, it may be stated that applied xerogel matrices, pure silica (SiO₂) and modified silica (SiO₂–CaO, SiO₂–PDMS and SiO₂–CaO–PDMS), could be promising candidates for the formulation in local delivery systems.     

Preparation and properties of polyimide/silica hybrid composites based on polymer‐modified colloidal silica

A new type of polyimide/silica (PI/SiO₂) hybrid composite films was prepared by blending polymer‐modified colloidal silica with the semiflexible polyimide. Polyimide was solution‐imidized at higher temperature than the glass transition temperature (T_g) using 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA) and 4,4′‐diaminodiphenyl ether (ODA). The morphological observation on the prepared hybrid films by scanning electron microscopy (SEM) pointed to the existence of miscible organic–inorganic phase, which resulted in improved mechanical properties compared with pure PI. The incorporation of the silica structures in the PI matrix also increased both T_g and thermal stability of the resulting films. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2053–2061, 2006     

Preparation and properties of ternary polyimide/SiO2/polydiphenylsiloxane composite films

A series of novel ternary polyimide/SiO₂/polydiphenylsiloxane (PI/SiO₂/PDPhS) composite films were prepared through co‐hydrolysis and condensation between tetramethoxysilane, diphenyldimethoxysilane (DDS) and aminopropyltriethoxysilane‐terminated polyamic acid, using an in situ sol–gel method. The composite films exhibited good optical transparency up to 30 wt% of total content of DDS and SiO₂. SEM analysis showed that the PDPhS and SiO₂ were well dispersed in the PI matrix without macroscopic separation of the composite films. TGA analysis indicated that the introduction of SiO₂ could improve the thermal stability of the composite films. Dynamic mechanical thermal analysis showed that the composite films with low DDS content (5 wt%) had a higher glass transition temperature (T_g) than pure PI matrix. When the content of DDS was above 10 wt%, the T_g of the composite decreased slightly due to the plasticizing effect of flexible PDPhS linkages on the rigid PI chains. The composite films with high SiO₂ content exhibited higher values of storage modulus. Tensile measurements also showed that the modulus and tensile strength of the composite films increased with increasing SiO₂ content, and the composite films still retained a high elongation at break due the introduction of DDS. The density and water absorption of the composite films were also characterized. Copyright © 2006 Society of Chemical Industry     

Fumed SiO2 nanoparticle reinforced biopolymer blend nanocomposites with high dielectric constant and low dielectric loss for flexible organic electronics

In the present study, fumed silica (SiO₂) nanoparticle reinforced poly(vinyl alcohol) (PVA) and poly(vinylpyrrolidone) (PVP) blend nanocomposite films were prepared via a simple solution‐blending technique. Fourier transform infrared spectroscopy (FTIR), ultraviolet–visible spectroscopy (UV–vis), X‐ray diffraction (XRD), and scanning electron microscopy (SEM) were employed to elucidate the successful incorporation of SiO₂ nanoparticles in the PVA/PVP blend matrix. A thermogravimetric analyzer was used to evaluate the thermal stability of the nanocomposites. The dielectric properties such as dielectric constant (?) and dielectric loss (tan δ) of the PVA/PVP/SiO₂ nanocomposite films were evaluated in the broadband frequency range of 10^?2 Hz to 20 MHz and for temperatures in the range 40–150 °C. The FTIR and UV–vis spectroscopy results implied the presence of hydrogen bonding interaction between SiO₂ and the PVA/PVP blend matrix. The XRD and SEM results revealed that SiO₂ nanoparticles were uniformly dispersed in the PVA/PVP blend matrix. The dielectric property analysis revealed that the dielectric constant values of the nanocomposites are higher than those of PVA/PVP blends. The maximum dielectric constant and the dielectric loss were 125 (10^?2 Hz, 150 °C) and 1.1 (10^?2 Hz, 70 °C), respectively, for PVA/PVP/SiO₂ nanocomposites with 25 wt % SiO₂ content. These results enable the preparation of dielectric nanocomposites using a facile solution‐casting method that exhibit the desirable dielectric performance for flexible organic electronics. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44427.     

PES/SiO2 nanocomposite by in situ polymerization: Synthesis,structure, properties,and new applications

SiO₂ nanoparticles of a quantum size (15 nm or less) were prepared via sol–gel method using tetraethylorthosilicate as a precursor. SiO₂ nanoparticles were characterized by X‐ray diffraction (XRD) and field‐emission scanning electron microscopy (FESEM) analyses. Polyethersulfone/silica (PES/SiO₂) crystal structure nanocomposite was prepared by in situ polymerization using silica nanoparticles as reinforcement filler. The polymerization reaction was done at 160°C in paraffin bath in the presence of diphenolic monomers. XRD and FESEM analyses were used to study the morphology of the synthesized nanocomposite. The purity and thermal property of the PES/SiO₂ nanocomposite were studied by energy dispersion of X‐ray analysis and differential scanning calorimetry, respectively. The effect of silica particles on the hydrophilicity of PES/SiO₂ nanocomposite was also investigated. It was showed that the PES/SiO₂ nanocomposite had a higher swelling degree when compared with the pure PES. The synthesized PES/SiO₂ powder was used to remove Cu(II) ions from its aqueous solution. The effect of experimental conditions such as pH, shaking time, and sorbent mass on adsorption capacity of PES/SiO₂ nanocomposite were investigated. It was found that incorporation of a low amount of silica (2 wt%) into the polymer matrix caused the increase of the Cu(II) ions adsorption capacity of PES. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Waterborne polyurethane/inorganic hybrid composites: preparation,morphology and properties

Abstract

A series of waterborne polyurethane/inorganic (WPU/TiO₂) hybrid composites were synthesised by a sol–gel process on the basis of isophorone diisocyanate, polyether polyol (GE-210), dimethylolpropionic acid, tetrabutyl titanate (TBT) and 3-glycidyloxypropyl trimethoxysilane as a coupling agent. The physical properties of the WPU and WPU/TiO₂ dispersions and hybrids were measured. Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, atomic force microscopy and X-ray diffraction were used to assess the fracture surface morphology and the dispersions of the WPU/TiO₂ hybrids. The scanning electron microscopy, transmission electron microscopy and atomic force microscopy results showed that the TiO₂ particles were dispersed homogeneously in the WPU matrix in nanoscale. The prepared hybrids showed good thermal stability and mechanical properties in comparison with pure WPU and showed tunable transparence with the TBT fraction in the film. Through suitable adjustment of TBT content, some thin hybrids have potential applications, such as coatings, leather finishing, adhesives, sealants, plastic coatings and wood finishes.     

Nanofibers reinforced silica aerogel composites having flexibility and ultra-low thermal conductivity

For the sake of enhancing the performance of flexible silica aerogel in practical applications, flexible SiO₂/SnO₂ nanofibers (SSNF) reinforced flexible silica aerogel composites (abbreviated as SiO₂-SSNF) were successfully prepared. Firstly, the SiO₂/SnO₂ nanofibers with fine diameter (~320 nm) and excellent flexibility were prepared by electrospinning technology. Then the aerogel composites were synthesized by adding the flexible SSNF to the silica solution and through the sol-gel method and ethanol supercritical drying technology. The effects of different content of the nanofibers on thermal conductivity and Yong's modulus of SiO₂-SSNF aerogel composites were investigated. The SiO₂/SnO₂ nanofibers were randomly dispersed in the flexible silica aerogel and the great integrity of the material result in smaller linear shrinkage, better thermal protection, and mechanical properties compared with those pure SiO₂ aerogels. The final SiO₂-SSNF aerogel composites possess excellent thermal conductivity (0.025-0.029 W/(m∙K)) and higher Yong's modulus (70 kPa), which was twice than that of the pure silica aerogel. This prepared SiO₂-SSNF aerogel composites can be better used in thermal insulation due to its excellent flexible and thermal insulation property.     

Properties of polyimide hybrids with mixed metal oxide

Polyimide/silica–titania (PI/SiO₂–TiO₂) hybrid films were prepared via an in situ sol–gel process. The PI precursor, poly(amic acid) (PAA), which contains 2,2'‐bis[4‐(4‐aminophenoxy)‐phenyl]propane (p‐BAPPP), 3,3',4,4'‐ benzophenetetracarboxylic anhydride (BTDA) and 3‐aminopropyltrimethoxysilane (APrTMOS), was first synthesized; this was followed by the addition of phenyltrimethoxysilane (PTMS) and/or tetraethyl orthotitanate (Ti(OEt)₄) to fabricate PI/SiO₂–TiO₂ films. The relative content of SiO₂ to TiO₂ has remarkable effects on the crosslink structure and resultant properties of the hybrids. XPS results confirm that the amount of Si on the surface of the hybrids is higher than that in the bulk. The distribution of Ti in the hybrid films is contrary to the above trend because of the formation of three‐dimensional Si? O? Si, Si? O? Ti, and Ti? O? Ti networks. The SiO₂ content of the hybrids containing only silica significantly affects their refractive index, contact angle, and dielectric constant. The films with added PTMS show higher contact angles than pure PI because nonpolar segments, ? C₂H₆ or benzene groups, tend to distribute on the surface. Upon the addition of (Ti(OEt)₄), some hydrophilic segments on the surface of the hybrids are induced because of the formation of a crosslinked structure. The denser crosslinked molecular structure, and consequently lower CTE and higher T_g are obtained from hybrids containing more TiO₂. By comparing the above properties and flexibility, the best composition of metal oxides (SiO₂/TiO₂) in hybrids is 20/80. That is, an optimum ratio of metal oxides in PI hybrids induces superior properties for advanced practical applications. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

A starch‐based biodegradable film modified by nano silicon dioxide

The purpose of this work was to improve the properties of the starch/poly(vinyl alcohol) (PVA) films with nano silicon dioxide (nano SiO₂). Starch/PVA/nano‐SiO₂ biodegradable blend films were prepared by a solution casting method. The characteristics of the films were assessed by Fourier Transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X‐ray photoelectron spectroscopy (XPS). The results obtained in this study indicated that the nano‐SiO₂ particles were dispersed evenly within the starch/PVA coating and an intermolecular hydrogen bond and a strong chemical bond C? O? Si were formed in the nano‐SiO₂ and starch/PVA. That the blending of starch, PVA and nano‐SiO₂ particles led to uniform starch/PVA/nano‐SiO₂ blend films with better mechanical properties. In addition, the nano‐SiO₂ particles can improve the water resistance and light transmission of the blend films. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation and characterization of multilayer anti-reflective coatings via sol-gel process

Single layer and multilayer films consisting of SnO₂, Ta₂O₅, SiO₂, TiO₂, indium tin oxide (ITO) and antimony tin oxide (ATO) have been prepared by sol-gel dip coating technique. All of the multilayer films contained a SiO₂ top layer, which was composed of SiO₂ nanoparticles. The other films had polymeric character. Obtained films were characterized by ellipsometry, XRD, AFM and SEM. Light transmittance values of the films were compared. Films other than SiO₂ and Ta₂O₅ were found to have crystalline structure. Thickness values of the films were in the range of 30–115 nm and roughness values were in 1.2–23 nm range. Single layer porous silica provided 95% light transmittance, whereas ITO-TiO₂-SiO₂ multilayer film provided a light transmittance of 97.2%.     

Preparation and property of raspberry‐like AS/SiO2 nanocomposite particles

Surfactant‐free poly(acrylonitrile‐co‐styrene)/silica (AS/SiO₂) nanocomposite particles was synthesized in the presence of cheap, commercially amorphous aqueous silica sol at ambient temperature. Thermogravimetric analysis (TGA) indicated silica contents ranging from 5 wt % to 29 wt %, depending on reaction conditions. Particle size distributions and morphologies were studied using dynamic light scattering (DLS) and transmission electron microscopy (TEM), which clearly showed that most of the colloidal nanocomposites comprised approximately spherical particle with raspberry‐like morphology and relatively narrow size distributions. The optical clarity of solution‐cast nanocomposite films was assessed using UV–vis spectrometer, with high transmission being obtained over the whole visible spectrum. Differential scanning calorimetry (DSC) studies showed that the glass transition temperature of AS/SiO₂ nanocomposites can be higher than the corresponding pure AS, resulting from the hydrophilicity of the nanometer silica. The robustness and simplicity of this method may make large‐scale manufacture of this nanocomposite possible. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 415–421, 2007