Effect of conductive polyaniline in thermoplastic natural rubber blends on the mechanical,thermal stability,and electrical conductivity properties

This research was conducted to fabricate thermoplastic natural rubber/polyaniline (TPNR/PANI) blends via melt blending method using an internal mixer and followed by compression molding. The effects of PANI contents between 1 and 5 wt % PANI in the TPNR blends on the mechanical properties, thermal stability, electrical conductivity (impedance), and morphology observation were investigated. The TPNR/3 wt % PANI sample exhibited the highest tensile strength (3.7 MPa), elongation at break (583%), flexural strength (1.8 MPa), flexural modulus (37.0 MPa), and impact strength (7.1 kJ m⁻²). From the aspect of thermal properties, it was found that with the addition of PANI, the thermal stability of the TPNR/PANI increased. Comparing to nonconductive TPNR sample, the incorporation of PANI promoted the electrical conductivity characteristic to PANI-filled TPNR blends which showing a magnitude order of 10⁻⁹ S cm⁻¹. Scanning electron microscopy micrograph revealed the good distribution of PANI at the optimum content (3 wt % PANI) in the TPNR blends and the good interaction between TPNR and PANI. It can be concluded that the TPNR blends incorporated with a low loading of PANI could be a newly good conductive material. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47527.     

Ternary system based on polyaniline,graphene, and acrylic matrix applied to thermoelectric systems

Thermoelectric (TE) materials have attracted attention for offering a green option for power generation, due to their ability to convert thermal energy into electricity. In recent years, a promising way to achieve efficiency in TE properties has been proposed based on composites of conjugated polymers, such as polyaniline (PANI), and carbon nanomaterials such as graphene (GR). Since polyaniline and GR composites are promising fillers for organic thermoelectric materials (OTE), we expanded their investigations for a ternary system (TS), providing materials with multiple functionalities, and high performance. In this research work, a TS based on an acrylic matrix (ACR), GR, and PANI was successfully prepared through the combination of in situ polymerization of aniline in contact with GR and mechanical mixture of the resulting hybrid with an ACR. Structural and morphological characterization confirmed that GR affected PANI morphology and crystallinity. The band gap determination by Tauc's relation indicated the occurrence of π-π interaction between the chains and an increase of the electrical conductivity of the composites allowed to infer a synergistic effect. The measured Seebeck coefficient reached a maximum value of −17.02 μVK⁻¹ and the highest power factor obtained was 4.94 μWm⁻¹ K⁻² for the ACR/PANI sample, indicating a material with promising thermoelectric properties.     

Heteroatom-doped reduced graphene oxide/polyaniline nanocomposites with improved n-type thermoelectric performance

Polyaniline (PANI) is a potential candidate for n-type thermoelectric (TE) materials owing to its intrinsic electrical conductivity, low thermal conductivity, and facile synthesis techniques. However, its low Seebeck coefficient and power factor have limited its widespread usage. In this study, nitrogen-doped, and sulfur-nitrogen co-doped reduced graphene oxide (rGO) were used for tuning the TE properties of PANI. Doped rGO and PANI/doped-rGO nanocomposites were prepared via hydrothermal technique and chemical oxidative polymerization respectively and thereafter characterized. The TE properties of the nanocomposites were also studied and an optimized Seebeck coefficient, power factor and zT value of −1.75 mV K⁻¹, 95 μW m⁻¹ K⁻² and 0.06, respectively were reported for the PANI nanocomposite containing 1 wt% sulfur-nitrogen co-doped rGO. These results suggest that PANI/heteroatom-doped rGO can serve as promising candidates for n-type based TE applications.     

Room temperature preparation,electrical conductivity,and thermal behavior evaluation on silver nanoparticle embedded polyaniline tungstophosphate nanocomposite

An advanced nanocomposite, polyaniline tungstophosphate (PANI‐WP) cation exchanger, was synthesized by simple solution method and treated with silver nitrate resulting silver embedded PANI‐WP (PANI‐WP/Ag). Spectroscopic characterization of PANI‐WP/Ag was carried out by scanning electron microscopy, fourier transform infrared spectroscopy, UV‐Visible spectroscopy, and X‐ray diffraction. Electrical conductivity measurements and thermal effect on conductivity of PANI‐WP/Ag was studied after acid treatment. The dc electrical conductivity was found 3.06 × 10⁻³ S cm⁻¹ for HCl doped, measured by 4‐in line‐probe dc electrical conductivity measuring technique. Thermal conductivity is stable with all temperatures in isothermal studies showing excellent stability of PANI‐WP/Ag material. Hybrid showed better linear Arrhenius electric conducting response for semiconductors, stable upto 120°C. It was observed that conductivity is at the border of metallic and semiconductor region. POLYM. COMPOS., 37:2460–2466, 2016. © 2015 Society of Plastics Engineers     

Synthesis,characterization, and comparison of self‐doped,doped, and undoped forms of polyaniline,poly(o‐anisidine), and poly[aniline‐co‐(o‐anisidine)]

Polyaniline (PANI), poly(o‐anisidine), and poly[aniline‐co‐(o‐anisidine)] were synthesized by chemical oxidative polymerization with ammonium persulfate as an oxidizing reagent in an HCl medium. The viscosities, electrical conductivity, and crystallinity of the resulting polymers (self‐doped forms) were compared with those of the doped and undoped forms. The self‐doped, doped, and undoped forms of these polymers were characterized with infrared spectroscopy, ultraviolet–visible spectroscopy, and a four‐point‐probe conductivity method. X‐ray diffraction characterization revealed the crystalline nature of the polymers. The observed decrease in the conductivity of the copolymer and poly(o‐anisidine) with respect to PANI was attributed to the incorporation of the methoxy moieties into the PANI chain. The homopolymers attained conductivity in the range of 3.97 × 10^?3 to 7.8 S/cm after doping with HCl. The conductivity of the undoped forms of the poly[aniline‐co‐(o‐anisidine)] and poly(o‐anisidine) was observed to be lower than 10^?5 J/S cm^?1. The conductivity of the studied polymer forms decreased by the doping process in the following order: self‐doped → doped → undoped. The conductivity of the studied polymers decreased by the monomer species in the following order: PANI → poly[aniline‐co‐(o‐anisidine)] → poly(o‐anisidine). All the polymer samples were largely amorphous, but with the attachment of the pendant groups of anisidine to the polymer system, the crystallinity region increased. The undoped form of poly[aniline‐co‐(o‐anisidine)] had good solubility in common organic solvents, whereas doped poly[aniline‐co‐(o‐anisidine)] was moderately crystalline and exhibited higher conductivity than the anisidine homopolymer. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Optical,electrical, and electrochemical properties of graphene based water soluble polyaniline composites

Polyaniline (PANI) is one of the most common polymers known for its conducting properties. However, poor water solubility limits its applications. In this work, PANI has been functionalized with sulfonic acid groups to produce sulfonated PANI (SPANI) offering excellent solubility in water. To compensate for the decrease of electrical conductivity due to functionalization, SPANI was combined with reduced graphene oxide (RGO) to form SPANI/RGO composites with interesting optical, thermal, and electrical properties. The composites have been characterized using X‐ray diffraction (XRD), field emission scanning electron microscopy, UV–vis absorption spectroscopy, Raman spectroscopy, Fourier‐transform infrared spectroscopy, X‐ray photoelectron spectroscopy, thermogravimetric analysis, cyclic voltammetry, and four probe electrical conductivity measurement. The SPANI/RGO composites show increased thermal stability, reduced optical band gap and improved electrochemical properties compared with the pure polymer. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42766.     

Enhanced conductivity and fluorescence of polyaniline doped with Eu3+, Tb3+, and Y3+ ions

The doped polyaniline (PANI) with rare earth ions, which exhibits an increasing conductivity and strongly enhanced fluorescence emission, was prepared by dispersing PANI powder suspension in acetonitrile solution containing rare earth ions according to different mass ratios of rare earth ions to PANI at room temperature. The structure of the doped PANI was characterized by the spectra of FTIR, Raman, UV-vis, and XRD. Red-shifted change for the quinoid and benzenoid stretching vibration is observed in IR and Raman spectra after doping rare earth cations, and UV-vis absorption peak also presents a red-shift, indicating that the doped PANI possesses a better delocalization of electrons along the mainchain backbone. The experimental data show that the electrical and optical behaviors of PANI strongly depend on the species of rare earth cations and their concentration. It is found that enhancing fluorescence for the doped PANI is observed by comparing with emeraldine base (EB). Moreover, the conductivity of the protonated PANI samples doped with Eu³⁺, Tb³⁺, and Y³⁺ ions, increases from 2.1 × 10⁻⁴ to 3.33 S cm⁻¹, 1.50 × 10⁻¹ S cm⁻¹ and 2.26 × 10⁻¹ S cm⁻¹. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Studies on SLS doped polyaniline and its blend with PC

Electrically conductive polyaniline (PANI) and its blend with polycarbonate (PC) was prepared by one-step emulsion polymerization technique in which sodium lauryl sulfate (SLS) acts as surfactant and as a protonating agent for the resulting polymer. The prepared PANI and its blends were characterized by density, percentage of water absorption, and electrical conductivity. PANI–PC blend exhibits a conductivity value of 4.70 × 10⁻² S/cm (PANI–PC1) and 5.68 × 10⁻⁵ S/cm (PANI–PC3) with a change in dopant from p-toluene sulfonic acid (TSA) to SLS, respectively. By using a more general method, which takes into account the presence of disorder of the second kind in polymers proposed by Hosemann, crystal size (〈N〉) and lattice strain (g in %) values were estimated. The variation of conductivity in doped PANI and PANI–PC blend has been explained on the basis of these microcrystalline parameters. TGA thermograms of PANI and PANI-PC blend show three-step degradation behavior. Thermal stability of PANI was improved after blending with PC. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 383–388, 2001     

Tailored biodegradable films via extrusion blow molding using PBS,PBAT, and TPS

Research to replace synthetic polymers with biodegradable polymers is on the rise because common plastics have generated serious ecosystem problems. Films with thermoplastic starch (TPS), poly(butylene succinate) (PBS), poly(butylene adipate-co-butylene terephthalate (PBAT), and citric acid (CA) were produced by blown extrusion. They were characterized by blow-up ratio (BUR), water vapor permeability (WVP), soluble ratio (SR), water sorption isotherm, and thermogravimetric (TG) techniques. Films were uniform and showed BUR > 205%. The different proportions of PBS and PBAT significantly influenced the WVP of the films. All samples had WVP with an order of magnitude similar to other blends with high starch content (10⁻⁶ g m⁻¹ day⁻¹ Pa⁻¹). CA efficiently decreased the WVP of the PBS/PBAT/TPS formulations (15/15/70% and 20/10/70% by mass) by 25.2% and 24.7% compared to the acid-free formulations. There was no significant difference in SR (19.0%–20.1%). These materials were sensitive to moisture since the equilibrium moisture content increased pronouncedly from water activity of 0.5. Films showed good thermal stability, with a maximum decomposition temperature close to pure polyesters. CA did not increase the thermal stability of blends, probably because of the low content used (0.1%). Given the outcomes of this study, these films could be deemed appropriate for applications in food packaging.     

A comparative assessment of poly(vinylidene fluoride)/conducting polymer electrospun nanofiber membranes for biomedical applications

Piezoelectric polymers, especially poly(vinylidene fluoride) (PVDF) are increasingly receiving interest as smart biomaterials for tissue engineering, energy harvesting, microfluidic, actuator, and biosensor applications. Despite possessing the greatest piezoelectric coefficients among all piezoelectric polymers, it is often desirable to increase the electrical outputs from PVDF for several of these applications. Blending with intrinsically conducting polymers (CP) in the form of nanofiber membranes is one of the facile methods to achieve the same. However, these polymers and their composites have so far been primarily investigated only for their physical property enhancements and in applications like energy storage while their biomedical applications and comparative assessment of their biocompatibility properties have not been yet explored. In this report, electrospinning of PVDF blends with polypyrrole (PPy), polyaniline (PANI), and a modified PANI with l -glutamic acid (PANI-LGA/P-LGA) is performed to obtain different electrically active material membranes. The PVDF:CP composite nanofibers are compared with respect to their nanostructures, β-phase content, and electrical conductivity. Further, biocompatibility of all the membranes was compared. It was found that incorporation of PPy, PANI, and P-LGA increased the electrical conductivity of PVDF while the β-phase content was also substantially enhanced. The highest biocompatibility with a pre-osteoblast cell line (MC3T3) was exhibited in the order p-LGA/PVDF > PANI/PVDF > PPy/PVDF, all being significantly higher than PVDF (p < .001). Although P-LGA/PVDF showed higher electrical conductivity, biocompatibility with MC3T3, it was found to be highly cytotoxic to a HeLa (cancer) cell line. It is concluded that such structure property relations would help in selection of materials for specific biomaterial applications.     

Photoluminescence,FTIR, and electrical characterization of samarium(III) chloride‐doped polyaniline

The synthesized polyaniline (PANI) is doped with different concentrations of Samarium(III) chloride (SmCl₃). The electrical conductivity of doped PANI samples has been measured in the temperature range (300–400K). It has been found that dc conductivity increases with the increase of dopant concentration. Different parameters, based on the conductivity, such as pre‐exponential factor (σ₀) and activation energy (ΔE) have also been calculated. These parameters exhibit information about the nature and suitability of the dopant. Doped samples are characterized by FTIR and photoluminescence studies, which show the interaction of dopant with PANI. Two sharp peaks of different intensities from PL spectra at 388 and 604nm have appeared in doped PANI, which might be due to the effect of SmCl₃. It has been observed that SmCl₃ (dopant) shows noticeable changes in the electrical and spectroscopic properties of doped PANI. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Electrical and structural properties of polyaniline/cellulose triacetate blend films

Polyaniline (PANI) has been blended with cellulose triacetate (CTA) to obtain both good mechanical properties and good electrical properties. The effects of PANI weight percentage on the optical, structural, morphological and electrical properties in the blend films of polyaniline and cellulose triacetate (PANI/CTA) have been investigated. The phenomenon of percolation was observed in these blend films. It is found that the electrical conductivity of the blend films increases with the increase of polyaniline content up to a value of 10⁻⁴ S cm⁻¹ at 84 weight percentage of PANI. The experimental percolation threshold of the dried blend films is obtained at 9.5 wt% of polyaniline. The values of Mott’s temperature, density of states at the Fermi level [N (E _f)], hopping distance (R _hop), and barrier height (W _hop) for PANI/CTA blend films are calculated. By applying Mott’s theory, it is found that the PANI/CTA blend films obey the three dimensional variable range hopping mechanism.     

Evolution of electrical conductivity in semi-interpenetrating polymer network of shape memory polyvinyl chloride and polyaniline

Electrically conductive semi-interpenetrating polymer network (IPN) from shape memory polyvinyl chloride (PVC) and polyaniline (PANI) is realized. The mechanical properties and shape memory performance of semi-IPN are slightly different from the original PVC. The distribution of PANI within PVC is found to be non-uniform in the thickness direction. The electrical conductivity of the as-fabricated sample at room temperature is around 4.5 × 10⁻² S/cm. However, after heating, thermal strain results in significant drop in electrical conductivity. Programming remarkably reduces the electrical conductivity as well. A higher programming temperature and higher programming strain result in more reduction. Subsequent heating for shape recovery causes further reduction in electrical conductivity, despite nearly full shape recovery is achieved. Doping (dedoping and redoping) is confirmed not the major player, but microgaps/fracture in PANI chains during stretching in programming and heating for shape recovery.     

Effects of hybrid fillers on the electrical conductivity,EMI shielding effectiveness,and flame retardancy of PBT and PolyASA composites with carbon fiber and MWCNT

The effects of hybrid fillers of carbon fiber (CF) and multiwall carbon nanotube (MWCNT) on the electrical conductivity, electromagnetic interference shielding effectiveness (EMI SE), flame retardancy, and mechanical properties of poly(butylene terephthalate) (PBT)/poly(acrylonitrile-co-styrene-co-acrylate) (PolyASA) (70/30, wt %) with conductive filler composites were investigated. The CF was used as the main filler, and MWCNT was used as the secondary filler to investigate the hybrid filler effect. For the PBT/PolyASA/CF (8 vol %)/MWCNT (2 vol %) composite, a higher electrical conductivity (1.4 × 10⁰ S cm⁻¹) and EMI SE (33.7 dB) were observed than that of the composite prepared with the single filler of CF (10 vol %), which were 9.0 × 10⁻² S cm⁻¹ and 23.7 dB, respectively. This increase in the electrical properties might be due to the longer CF length and hybrid filler effect in the composites. From the results of aging test at 85 °C, 120 h, the electrical conductivity and EMI SE of the composites decreased slightly compared to that of the composite without aging. The results of electrical conductivity, EMI SE, and flame retardancy suggested that the composite with the hybrid fillers of CF and MWCNT showed a synergetic effect in the PBT/PolyASA/CF (8 vol %)/MWCNT (2 vol %) composite. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48162.     

Preparation of polyaniline/vermiculite clay nanocomposites by in situ chemical oxidative grafting polymerization

BACKGROUND: Recently, conducting polymers have attracted much attention, since they have interesting physical properties and many potential applications, such as in conductive coating charge storage. Hence the synthesis of conducting polymer nanocomposites is also an area of increasing research activity. RESULTS: Vermiculites (VMTs) were successfully delaminated using an acid treatment. Polyaniline (PANI)/VMT nanocomposites were prepared by in situ chemical oxidative grafting polymerization. CONCLUSION: The chemical grafting of PANI/VMTs was confirmed by Fourier transform infrared and UV‐visible spectroscopy. The percentage of grafted PANI was 142.7 wt% as a mass ratio of the grafting PANI and charged nano‐VMTs, investigated using thermogravimetric analysis. In addition, characteristic agglomerate morphology of PANI was observed in the composites using scanning electron microscopy. Thermal analyses indicated that the introduction of VMT nanosheets had a beneficial effect on the thermal stability of PANI. The electrical conductivity of the nanocomposites was 3.9 × 10^?3 S cm^?1, a value typical for semiconductors. Copyright © 2009 Society of Chemical Industry     

A comparative study on camphorsulphonic acid modified montmorillonite clay based conducting polymer nanocomposites

Nanotechnology has emerged as a subject of immense academic interest and excitement in the past few decades. The immediate goal of this science aims at the production of high performance nanomaterials. The present study reports comparative investigations on the in situ polymerization of polyaniline (PANI), and its derivatives poly(1‐naphthylamine) (PNA) and poly(o‐toluidine) (POT) within the camphor sulphonic acid (CSA) modified montmorillonite (MMT) layers. The polymerization as well as intercalation of the conducting polymers was confirmed by FT‐IR, UV‐visible spectroscopies, and XRD studies, whereas the morphology of the nanocomposites was analyzed by TEM studies. It was found that the PANI derivatives (PNA and POT) revealed higher intercalation as compared with PANI. The morphology of nanocomposites was found to be governed by the type of conducting polymer intercalated. A large variation in the morphology as well as particle size was observed between the nanocomposites of PANI and its derivatives. The conductivity was found to be in the range of 10⁻³–10⁻² S·cm⁻¹. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Preparation,structural, and electrical studies of polyaniline/ZnFe2O4 nanocomposites

Polyaniline/ZnFe₂O₄ nanocomposites were synthesized by a simple and inexpensive one‐step in situ polymerization method in the presence of ZnFe₂O₄ nanoparticles. The structural, morphological, and electrical properties of the samples were characterized by wide angle X‐ray diffraction (WAXD), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). WAXD and SEM revealed the formation of polyaniline/ZnFe₂O₄ nanocomposites. Infrared spectroscopy indicated that there was some interaction between the ZnFe₂O₄ nanoparticles and polyaniline. The dc electrical conductivity measurements were carried in the temperature range of 80 to 300 K. With increase in the doping concentration of ZnFe₂O₄, the conductivity of the nanocomposites found to be decreasing from 5.15 to 0.92 Scm⁻¹ and the temperature dependent resistivity follows ln ρ(T) ∼ T^−1/2 behavior. The nanocomposites (80 wt % of ZnFe₂O₄) show a more negative magnetoresistance compared with that of pure polyaniline (PANI). These results suggest that the interaction between the polymer matrix PANI and zinc nanoparticles take place in these nanocomposites. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Aliphatic–aromatic polyester–polyaniline composites: preparation,characterization, antibacterial activity and conducting properties

Poly(butylene adipate‐co‐terephthalate) (PBAT) composites containing polyaniline (PANI) were prepared using a melt blending process. Acrylic‐acid‐grafted PBAT (PBAT‐g‐AA) and PANI were used to improve the compatibility and dispersibility of PANI within the PBAT matrix. The composites were characterised morphologically using scanning electron microscopy, chemically using Fourier transform IR spectrometry and ¹³C solid‐state nuclear magnetic resonance, and optically using UV‐visible spectroscopy. The electrical conductivity of the composites was also evaluated with a resistance tester and a cyclic voltameter. Escherichia coli (BCRC 10239) was chosen as the standard bacterium for determining the antibacterial properties of the composite materials. The anti‐static properties of the composites were also evaluated. The PBAT‐g‐AA/PANI composite showed markedly enhanced antibacterial and anti‐static properties due to the formation of amide bonds by the condensation of the carboxylic acid groups of PBAT‐g‐AA with the amino groups of PANI. The optimal level of PANI was 9 wt%, as excess PANI led to separation of the two organic phases, lowering their compatibility. Copyright © 2012 Society of Chemical Industry     

Ferromagnetic polyaniline/TiO2 nanocomposites

Novel ferromagnetic semiconducting polyaniline PANI/TiO₂ nanocomposites were synthesized by the oxidative polymerization of aniline with ammonium peroxydisulfate in an aqueous medium, in the presence of colloidal TiO₂ nanoparticles (d ∼ 4.5 nm), without added acid. The morphological, magnetic, structural, and optical properties of the PANI/TiO₂ nanocomposites prepared at initial aniline/TiO₂ mole ratios 80, 40, and 20 were studied by scanning electron microscopy, superconducting quantum interference device, X‐ray powder diffraction, FTIR, Raman, and UV‐Vis spectroscopies. The emeraldine salt form of linear PANI chains as well as the presence of phenazine units, branched PANI chains, and anatase crystalline structure of TiO₂ in PANI/TiO₂ nanocomposites was confirmed by FTIR and Raman spectroscopies. The electrical conductivity of synthesized composites was ∼10⁻³ S cm⁻¹. The room temperature ferromagnetic response with coercive field of H_c ∼ 300 Oe and the remanent magnetization of M_r ∼ 4.35 × 10⁻⁴ emu/g was detected in all investigated PANI/TiO₂ nanocomposites. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Synthesis of copper chloride and cobalt chloride doped polyanilines and their magnetic and alternating‐current transport properties

Polyaniline (PANI) was synthesized by the well‐known oxidative polymerization of aniline with ammonium peroxodisulfate as the oxidant. The morphological, structural, thermal, optical, magnetic, and electrical properties were characterized with scanning electron microscopy, X‐ray diffraction, Fourier transform infrared, thermogravimetric analysis, differential scanning calorimetry, ultraviolet–visible spectroscopy, room‐temperature magnetic measurements, and low‐temperature electrical transport measurements by the standard four‐probe method. Greater thermal stability and crystallinity were observed in doped PANI versus pure PANI. Magnetic measurements showed that the magnetic susceptibility was field‐dependent. Positive and negative susceptibility values were observed. This may have been due to the interactions of magnetic ions among interchains or intrachains of the polymer matrix. The alternating‐current (ac) conductivity was measured in the temperature range of 77–300 K in the frequency range of 20 Hz to 1 MHz. The frequency‐dependent real part of the complex ac conductivity was found to follow the universal dielectric response: σ′(f) ∝ f^s [where σ′(f) is the frequency‐dependent total conductivity, f is the frequency, and s is the frequency exponent] The trend in the variation of the frequency exponent with temperature corroborated the fact that correlated barrier hopping was the dominant charge‐transport mechanism for PANI–CoCl₂. An anomalous dependence on temperature of the frequency exponent was observed for PANI–CuCl₂. This anomalous behavior could not be explained in terms of existing theories. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010