Surface modification of cellulose filter paper by glycidyl methacrylate grafting for biomolecule immobilization: Influence of grafting parameters and urease immobilization

Graft copolymerization of glycidyl methacrylate (GMA) onto cellulose filter paper (CFP) was carried out by a free‐radical initiating process using ceric ammonium nitrate (CAN) as an initiator. Optimum conditions pertaining to different grafting percentages were evaluated as a function of monomer and initiator concentrations, polymerization time and temperature. CFP with various graft levels of GMA was characterized by fourier transform infrared (FTIR) spectroscopy and thermo gravimetric analysis (TGA). Surface morphology of ungrafted and grafted CFP was evaluated by scanning electron microscopy (SEM). Attenuated total reflectance (ATR)‐FTIR spectral analysis provided the evidence of grafting of GMA onto CFP. The maximum grafting of 102% was achieved by using 4 × 10^?3 molL^?1 CAN and 5% of GMA (w/v) monomer at 60°C in 25 min. The CFP‐g‐GMA surfaces with different graft levels were evaluated as a support for immobilization of biomolecules. Urease was selected as the model enzyme to be covalently coupled through the surface epoxy groups of the CFP‐g‐GMA discs. Immobilized discs were further studied for urea estimation and their reusability. Although the highest degree of urease immobilization was observed at 100% (162‐μg urease/disc) graft level, the urease immobilized on discs with 70% (105‐μg urease/disc) graft level gave the maximum activity of the enzyme. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Chitosan‐grafted poly(hydroxyethyl methacrylate‐co‐glycidyl methacrylate) membranes for reversible enzyme immobilization

Epoxy group‐containing poly(hydroxyethyl methacrylate/glycidyl methacrylate), p(HEMA/GMA), membrane was prepared by UV initiated photopolymerization. The membrane was grafted with chitosan (CH) and some of them were chelated with Fe(III) ions. The CH grafted, p(HEMA/GMA), and Fe(III) ions incorporated p(HEMA/GMA)‐CH‐Fe(III) membranes were used for glucose oxidase (GOD) immobilization via adsorption. The maximum enzyme immobilization capacity of the p(HEMA/GMA)‐CH and p(HEMA/GMA)‐CH‐Fe(III) membranes were 0.89 and 1.36 mg/mL, respectively. The optimal pH value for the immobilized GOD preparations is found to have shifted 0.5 units to more acidic pH 5.0. Optimum temperature for both immobilized preparations was 10°C higher than that of the free enzyme and was significantly broader at higher temperatures. The apparent K_m values were found to be 6.9 and 5.8 mM for the adsorbed GOD on p(HEMA/GMA)‐CH and p(HEMA/GMA)‐CH‐Fe(III) membranes, respectively. In addition, all the membranes surfaces were characterized by contact angle measurements. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3084–3093, 2007     

Modification of polypropylene through intercrosslinking graft copolymerization of poly(vinyl alcohol): Synthesis and characterization

Modification of polypropylene (PP) has been successfully carried out through intercrosslinking of poly(vinyl alcohol) (PVA), by chemical graft copolymerization method using benzoyl peroxide (BPO) as radical initiator. Prior to grafting, PP was irradiated by gamma rays at a constant dose rate of 3.40 kGy/h to introduce hydroperoxide groups. Optimum conditions pertaining to maximum percentage of grafting were evaluated as a function of different reaction parameters. Maximum percentage ofgrafting of PVA (75%) was obtained at [BPO] = 5.51 × 10^?2 mol/L in 120 min at 70°C using 15 mL of water. Characterization of pristine PP and PP‐g‐PVA was carried out by FTIR, thermogravimetric analysis, and scanning electron micrography. Swelling studies were carried out in pure, binary, ternary, and quaternary solvent systems comprising of water, ethanol (EtOH), dimethylsulfoxide (DMSO) and N, N‐dimethylformamide (DMF) in different ratios. Maximum swelling values of PP‐g‐PVA (both composite and true graft) was observed in pure DMSO followed by DMF, EtOH, and water and it was also higher than that observed in mixed solvent system. Water retention studies of pristine PP and PP‐g‐PVA (both composite and true graft) were investigated at different time periods, temperature, and pH. Maximum % water retention of PP‐g‐PVA (composite) (108%) was observed in 8 h at 50°C in neutral medium (pH = 7). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of polypropylene‐grafted gelatin

Modification of polypropylene (PP) has been successfully carried out by graft copolymerization of gelatin, by chemical method using benzoyl peroxide (BPO) as radical initiator. PP was preirradiated by gamma rays at a constant dose rate of 3.40 kGy/h before grafting to introduce hydroperoxide groups. Optimum conditions pertaining to maximum percentage of grafting were evaluated as a function of different reaction parameters. Maximum percentage of grafting of gelatin (115%) was obtained at BPO concentration = 4.132 × 10^?2 mol/L in 120 min at 70°C using 30 mL of water. Characterization of PP‐g‐gelatin was carried out through FTIR, thermogravimetric analysis, and scanning electron microscopy. Swelling studies were carried out in pure, binary, ternary, and quaternary solvent systems comprising distilled water, ethanol, dimethylsulphoxide (DMSO), and N,N‐dimethylformamide (DMF) in different ratios. Maximum swelling of PP‐g‐gelatin (both composite and true graft) was observed in pure solvents that is, DMSO followed by DMF, ethanol, and water and was higher than that observed in the mixed solvent system. Water retention studies of unmodified PP, that is, pristine PP and PP‐g‐gelatin (both composite and true graft) were investigated at different time periods, temperatures and pH. Maximum % water retention for PP‐g‐gelatin (composite; 170%) was observed in 8 h at 50°C in neutral medium (pH = 7). © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Starch‐grafted polypropylene: Synthesis and characterization

Graft copolymerization of starch has been carried out onto preirradiated polypropylene (PP) in an aqueous medium using benzoyl peroxide (BPO) as the radical initiator. The maximum percentage of grafting (115%) of starch onto PP was obtained at optimum conditions of BPO concentration, 1.239 × 10⁻³ moles; temperature, 65°C; in 120 min. using 30 mL of water. Swelling studies were carried out in pure, binary, ternary and quaternary solvent systems comprising of water, ethanol (EtOH), dimethylsulphoxide (DMSO), and N,N‐dimethylformamide (DMF) in different ratios. Maximum swelling is observed in DMSO and DMF, followed by EtOH and least in water for true graft. Water retention studies of pristine PP and PP‐g‐Starch (both composite and true graft) were investigated at different time periods, temperature and pH. The composite contains grafted PP, unreacted starch and unreacted PP whereas true graft is the product from which both unreacted polymers have been removed. Maximum % water retention of PP‐g‐Starch (composite) (110%) was observed in 8 h at 50°C in neutral medium (pH = 7). The graft copolymers were characterized by FTIR, DTG, DTA, TGA, and SEM. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Polyether‐segmented nylon hemodialysis membrane. VII. Studies on surface structures of various poly(ethylene oxide)‐segmented nylon membranes

The relationships of the surface morphologies to the surface chemical compositions in poly(ethylene oxide)‐segmented nylon (PEO–Ny) membranes prepared by the phase‐inversion method were studied using scanning electron microscopy (SEM), electron spectroscopy for chemical analysis (ESCA), and static secondary ion mass spectrometry (SSIMS). The PEO–Ny's used were high semicrystalline PEO‐segmented polyiminosebacoyliminohexamethylene (PEO–Ny610), low semicrystalline PEO‐segmented poly(iminosebacoylimino‐m‐xylylene) (PEO–NyM10), and amorphous PEO‐ segmented poly(iminoisophthaloyliminomethylene‐1,3‐cyclohexylenemethylene) (PEO–NyBI). SEM observation showed that the surfaces of the PEO–Ny610 and PEO–NyM10 membranes were composed of crystalline spherulite and that the PEO–NyBI membrane surface had a nodular structure. ESCA analysis exhibited the enrichment of the PEO segment at the surfaces of the PEO–Ny610 and PEO–NyM10 membranes. On the other hand, the enrichment of the Ny segment was observed in the case of the PEO–NyBI membrane. SSIMS analysis revealed that the outermost surfaces of the PEO–Ny membranes except the PEO–NyBI membrane were almost covered with the PEO segment. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 517–528, 2000     

Poly(vinylbenzylchloride) beads grafted with polymer brushes carrying hydrazine ligand for reversible enzyme immobilization

Poly(glycidylmethacrylate), p(GMA), brush grafted poly(vinylbenzyl chloride/ethyleneglycol dimethacrylate), p(VBC/EGDMA), beads were prepared by suspension polymerization and the beads were grafted with poly(glycidyl methacrylate), p(GMA), via surface‐initiated atom transfer radical polymerization aiming to construct a material surface with fibrous polymer. The epoxy groups of the fibrous polymer were reacted with hydrazine (HDZ) to create affinity binding site on the support for adsorption of protein. The influence of pH, and initial invertase concentration on the immobilization capacity of the p(VBC/EGDMA‐g‐GMA)‐HDZ beads has been investigated. Maximum invertase immobilization onto hydrazine functionalized beads was found to be 86.7 mg/g at pH 4.0. The experimental equilibrium data obtained invertase adsorption onto p(VBC/EGDMA‐g‐GMA)‐HDZ affinity beads fitted well to the Langmuir isotherm model. It was shown that the relative activity of immobilized invertase was higher than that of the free enzyme over broader pH and temperature ranges. The K_m and V_max values of the immobilized invertase were larger than those of the free enzyme. After inactivation of enzyme, p(VBC/EGDMA‐g‐GMA)‐HDZ beads can be easily regenerated and reloaded with the enzyme for repeated use. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Thermoresponsive and biocompatible poly(vinyl alcohol)‐graft‐poly(N,N‐diethylacrylamide) copolymer: Microwave‐assisted synthesis,characterization, and swelling behavior

Novel thermoresponsive poly(vinyl alcohol)‐graft‐poly(N,N‐diethylacrylamide) (PVA‐g‐PDEAAm) copolymers were prepared by microwave‐assisted graft copolymerization using a potassium persulfate/N,N,N′,N′‐tetramethylethylenediamine (KPS/TEMED) initiator system. The structures of PVA‐g‐PDEAAm copolymers were characterized by ¹H‐NMR, Fourier transform infrared spectroscopy, differential scanning calorimetry/thermogravimetric analysis, gel permeation chromatography, X‐ray diffraction, and scanning electron microscopy. The effects of various process parameters on grafting were systematically studied: microwave power, KPS, monomer and PVA concentrations, and ultraviolet irradiation. Under optimal conditions, the maximum grafting percent and graft efficiency were 101% and 93%, respectively. Furthermore, a lower critical temperature of copolymers was measured in the range 29–31 °C by ultraviolet spectroscopy. The swelling behavior of graft membranes was carried out at various temperatures, and the results showed that the swelling behavior of membranes was dependent on the temperature. In vitro cell culture studies using L929 fibroblast cells confirmed cell compatibility with the PVA‐g‐PDEAAm copolymer and its membrane, making them an attractive candidate for drug delivery systems. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45969.     

Water Free Operated Phosphoric Acid Doped Radiation‐Grafted Proton Conducting Membranes for High Temperature Polymer Electrolyte Membrane Fuel Cells

The present study uses the radiation‐induced grafting method and applies it onto poly(ethylene‐alt‐tetrafluoroethylene) (ETFE) for the synthesis of proton‐exchange membranes by using monomers 4‐vinyl pyridine (4VP), 2‐vinyl pyridine (2VP), N‐vinyl‐2‐pyrrolidone (NVP) followed by phosphoric acid doping. Phosphoric acid that provides Grotthuss mechanism in proton mobilization is used to transform the graft copolymers to a high temperature membrane state. Resultant proton‐exchange membranes are verified with their proton conductivity, water uptake, mechanical and thermal properties, and phosphorous distribution as ex situ characterization. Our most important finding as a novelty in literature is that ETFE‐g‐P4VP phosphoric acid doped proton‐exchange membranes exhibit proton conductivities as 66 mS cm^–1 at 130 °C, 53 mS cm^–1 at 120 °C, 45 mS cm^–1 at 80 °C at RH 100% and 55 mS cm^–1 at 130 °C, 40 mS cm^–1 at 120 °C, 35 mS cm^–1 at 80 °C at dry conditions. Moreover, ETFE‐g‐P4VP membranes still conserves the mechanical properties, i.e., tensile strength up to 48 MPa. ETFE‐g‐P4VP membranes were tested in PEMFC at 80, 100, and 120 °C and RH <2% and exhibit promising performance as an alternative to commercial Nafion® membranes. The single cell testing performance of ETFE‐g‐P4VP membranes is presented for the first time in literature in our study.     

Enhanced foamability of isotactic polypropylene composites by polypropylene‐graft‐carbon nanotube

In this article, utilizing a nucleophilic substitution reaction between epoxy group in polypropylene‐graft‐glycidyl methacrylate (PP‐g‐GMA) and carboxyl groups in oxidized carbon nanotubes (O‐CNTs), PP‐g‐CNT was fabricated for reinforcing the interfacial adhesion between CNTs and polypropylene (PP) matrix, favoring the enhancement of melt strength and elastic modulus, i.e., enhancing the foaming ability of PP composites. Cellular structure and thermo‐mechanical properties of PP foams were characterized by scanning electron microscopy and dynamic mechanical analysis, respectively. The average cell diameter of PP foams decreased from 289.2 (PP‐g‐GMA) to 96.7 μm (PP‐g‐CNT foams with 2.0 wt % O‐CNT) and the distribution of cell size also became more uniform. The storage modulus of PP‐g‐CNT foams increased by nearly 62.5% at ?40°C, compared with that of PP‐g‐GMA foams. This work also provided a new procedure for improving the foam ability and thermo‐mechanical property of PP composites. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 961‐968, 2013     

Atom transfer radical copolymerization of glycidyl methacrylate and methyl methacrylate

Glycidyl methacrylate (GMA) and methyl methacrylate (MMA) copolymers were synthesized by atom transfer radical polymerization (ATRP). The effect of different molar fractions of GMA, ranging from 0.28 to 1.0, on the polymer polydispersity index (weight‐average molecular weight/number‐average molecular weight) as the indicator of a controlled process was investigated at 70°C, with ethyl 2‐bromoisobutyrate as an initiator and 4,4′‐dinonyl‐2,2′‐bipyridyne (dNbpy)/CuBr as a catalyst system in anisole. The monomer reactivity ratios (r values) were obtained by the application of the conventional linearization Fineman–Ross method (r_GMA = 1.24 ± 0.02 and r_MMA = 0.85 ± 0.03) and by the Mayo–Lewis method (r_GMA = 1.19 ± 0.04 and r_MMA = 0.86 ± 0.03). The molecular weights and polydispersities of the copolymers exhibited a linear increase with GMA content. The copolymer compositions were determined by ¹H‐NMR and showed a domination of syndiotactic structures. The glass‐transition temperatures (T_g) of the copolymers analyzed by differential scanning calorimetry (DSC) decreased in the range 105–65°C with increasing GMA units. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation and characterization of antifouling poly(vinylidene fluoride) blended membranes

Poly(vinylidene fluoride) (PVDF) membranes have been widely used in microfiltration and ultrafiltration because of their excellent chemical resistance and thermal properties. However, PVDF membranes have exhibited severe membrane fouling because of their hydrophobic properties. In this study, we investigated the antifouling properties of PVDF blended membranes. Antifouling PVDF blended membranes were prepared with a PVDF‐g‐poly(ethylene glycol) methyl ether methacrylate (POEM) graft copolymer. The PVDF‐g‐POEM graft copolymer was synthesized by the atom transfer radical polymerization (ATRP) method. The chemical structure and properties of the synthesized PVDF‐g‐POEM graft copolymer were determined by NMR, Fourier transform infrared spectroscopy, and gel permeation chromatography. To investigate the antifouling properties of the membranes, we prepared microfiltration membranes by using the phase‐inversion method, which uses various PVDF/PVDF‐g‐POEM concentrations in dope solutions. The pure water permeabilities were obtained at various pressures. The PVDF/PVDF‐g‐POEM blended membranes exhibited no irreversible fouling in the dead‐end filtration of foulants, including bovine serum albumin, sodium alginate, and Escherichia coli broth. However, the hydrophobic PVDF membrane exhibited severe fouling in comparison with the PVDF/PVDF‐g‐POEM blended membranes. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Poly(hydroxyethyl methacrylate‐co‐glycidyl methacrylate) reactive membrane utilised for cholesterol oxidase immobilisation

Poly(2‐hydroxyethyl methacrylate‐co‐glycidyl methacrylate) p(HEMA–GMA) membrane was prepared by UV‐initiated photopolymerisation of 2‐hydroxyethyl methacrylate (HEMA) and glycidyl methacrylate (GMA) in the presence of an initiator, azobisisobutyronitrile (AIBN). Cholesterol oxidase was immobilised directly on the membrane by forming covalent bonds between its amino groups and the epoxide groups of the membrane. An average of 53 µg of enzyme was immobilised per cm² of membrane, and the bound enzyme retained about 67% of its initial activity. Immobilisation improved the pH stability of the enzyme as well as its temperature stability. The optimum temperature was 5 °C higher than that of the free enzyme and was significantly broader. The thermal inactivation rate constants for free and immobilised preparations at 70 °C were calculated as k_{i (free)} 1.06 × 10^?1 min^?1 and k_{i (imm)} 2.68 × 10^?2 min^?1, respectively. The immobilised enzyme activity was found to be quite stable in the repeated experiments. © 2002 Society of Chemical Industry     

Syntheses and properties of graft polymers of N‐substituted acrylamides onto EPDM

The graft polymerizations of N‐isopropylacrylamide (NIPAM) or N‐phenylacrylamide (NPAM) onto ethylene‐propylene‐diene terpolymer (EPDM) were carried out with benzoyl peroxide (BPO) as an initiator in toluene or THF. The structures of synthesized graft polymers, EPDM‐g‐N‐isopropylacrylamide (ENIPAM) and EPDM‐g‐N‐phenylacrylamide (ENPAM), were identified by infrared (IR) spectroscopy. The effects of monomer concentration, reaction time, and initiator concentration were investigated on the graft polymerization. The highest graft efficiency of NIPAM was obtained at 0.75 mol/L of NIPAM, 4 g of EPDM, 3 wt % of BPO, and 70°C for 48 h and that of NPAM did not much change up to 0.75 mol/L of NPAM, 4 g of EPDM, 3 wt % of BPO, and 70°C for 72 h. The thermal decomposition temperatures, wettabilities, and tensile strengths of ENIPAM and ENPAM all decreased with an increasing concentration of NIPAM and NPAM moiety in the corresponding polymers, respectively. The morphologies of ENIPAM and ENPAM after irradiation showed many gel particles as compared with those of ENIPAM and ENPAM before irradiation. The UV light and ⁶⁰Co γ‐ray resistances of ENIPAM and ENPAM were worse than those of EPDM due to carbonyl group in NIPAM and NPAM. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 3259–3267, 1999     

Synthesis and application of MDPE‐g‐GMA as reactive compatibilizer in blends of MDPE/PET and MDPE/PA6

In the present study, glycidyl methacrylate (GMA) grafted medium density polyethylene (MDPE‐g‐GMA) was synthesized in the molten state and applied as a reactive compatibilizer in MDPE/polyamid6 (PA6) and in MDPE/poly(ethylene terephtalate) (PET) blends. Graft copolymerization of GMA onto MDPE was performed in presence and absence of styrene, with different concentrations of dicumyl peroxide (DCP) as a radical initiator. In the presence of styrene, the MDPE‐g‐GMA with 6% GMA was obtained by addition of only 0.1 phr of DCP. Furthermore, the maximum grafting was reached when 0.6 and 0.7 phr concentration of DCP for styrene containing and styrene free samples were used, respectively. Torque‐time measurement showed faster grafting reaction rate in the presence of styrene. Four MDPE‐g‐GMA samples were selected as compatibilizers in the blends. Furthermore, the effects of melt flow index and grafting content of compatibilizers on mechanical properties and morphology of the blends were investigated through tensile tests and SEM analysis. Tensile test results indicated that the presence of compatibilizers in the blends led to 250 and 133% increase in elongation at break for PA6 and PET blends, respectively. Moreover, the best tensile results for blends were obtained using MDPE‐g‐GMA with high flow ability. The average particle size of the dispersed phase decreased by 350% for PA6 and 300% for PET blends compared with nonreactive blends. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Stabilized electrospinning of heat stimuli/in situ crosslinkable nanofibers and their self‐same nanocomposites

We present a strategy for stabilizing the morphological integrity of electrospun polymeric nanofibers by heat stimuli in situ crosslinking. Amorphous polymer nanofibers, such as polystyrene (PS) and its co‐polymers tend to lose their fiber morphology during processing at temperatures above their glass transition temperature (T_g) typically bound to happen in nanocomposite/structural composite applications. As an answer to this problem, incorporation of the crosslinking agents, phthalic anhydride (PA) and tributylamine (TBA), into the electrospinning polymer solution functionalized by glycidylmethacrylate (GMA) copolymerization, namely P(St‐co‐GMA), is demonstrated. Despite the presence of the crosslinker molecules, the electrospinning polymer solution is stable and its viscosity remains unaffected below 60 °C. Crosslinking reaction stands‐by and can be thermally stimulated during post‐processing of the electrospun P(St‐co‐GMA)/PA‐TBA fiber mat at intermediate temperatures (below the T_g). This strategy enables the preservation of the nanofiber morphology during subsequent high temperature processing. The crosslinking event leads to an increase in T_g of the base polymer by 30 °C depending on degree of crosslinking. Crosslinked nanofibers are able to maintain their nanofibrous morphology above the T_g and upon exposure to organic solvents. In situ crosslinking in epoxy matrix is also reported as an example of high temperature demanding application/processing. Finally, a self‐same fibrous nanocomposite is demonstrated by dual electrospinning of P(St‐co‐GMA) and stabilized P(St‐co‐GMA)/PA‐TBA, forming an intermingled nanofibrous mat, followed by a heating cycle. The product is a composite of crosslinked P(St‐co‐GMA)/PA‐TBA fibers fused by P(St‐co‐GMA) matrix. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44090.     

Effects of water on the long‐term properties of Bis‐GMA and silylated‐(Bis‐GMA) polymers

Bis‐GMA (2,2‐bis‐[4‐(2‐hydroxy‐3‐methacryloxypropoxy)phenyl]propane) is a viscous hygroscopic monomer which is used with triethyleneglycol‐dimethacrylate (TEGDMA) for dental restorations. Bis‐GMA was silylated with dimethyl‐isopropyl‐siloxane and further polymerized in order to increase water resistance and viscosity. The viscosity of the silylated monomer, Sil·Bis‐GMA, was 50 times lower than that of the parent monomer. After 1 month in water, poly(Bis‐GMA/TEGDMA) absorbed 2.6% water and the silylated polymer, poly(Sil·Bis‐GMA), only 0.56%. During this process water extracted residual monomer from each polymer. The behavior of water sorption and desorption as a function of time in poly(Sil·Bis‐GMA) was completely different from that shown by poly(Bis‐GMA/TEGDMA). The difference is discussed in terms of diffusion coefficients. Initially, water advancing contact angles (θ_ADV) were 75° and 95°, respectively. After 1 month in water both polymers showed a reduction of about 20° in θ_ADV. In poly(Bis‐GMA/TEGDMA), the reduction in θ_ADV obey to water absorption and bulk plasticization; it showed a reduction of 15°C in glass transition temperature, T_g. In contrast, the reduction in θ_ADV in poly (Sil·Bis‐GMA) obeyed to water adsorption and reorientation of the molecules at the surface in contact with the water phase; it only showed a change of 2°C in T_g. Contact angle hysteresis provided further evidence about plasticization. According to our results poly(Sil·Bis‐GMA) is more stable in water than poly(Bis‐GMA/TEGDMA). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

pH‐ and temperature‐sensitive in vitro release of salicylic acid through poly(vinyl alcohol‐g‐acrylamide) membranes

In this study, acrylamide (AAm) was grafted onto poly(vinyl alcohol) (PVA) in solution with UV radiation, and membranes were prepared from the graft copolymer (PVA‐g‐AAm) for transdermal release of salicylic acid (SA) at in vitro conditions. Permeation studies were carried out using a Franz‐type diffusion cell. Release characteristics of SA through PVA and PVA‐g‐AAm membranes were studied using 2.0 mg/mL SA solutions. Effects of the presence of AAm in the copolymer, pH of donor and acceptor solution, and concentration of SA and temperature on the release of SA were investigated. Permeation of SA through the membranes was found to be pH‐dependent, and increase in pH generally increased the release percentage of SA, and the presence of AAm in the membrane positively affected the permeation. The effect of concentrations of SA on the permeation was also searched using saturated solution of SA, and permeated amount of SA was found to be less than in the case of unsaturated SA solution. Studies showed that the release of SA from PVA‐g‐AAm membranes was temperature‐sensitive and increase in temperature increased the permeation rate. 82.76% (w/w) SA was released at the end of 24 h at (39 ± 1)°C, and the overall activation energy for the permeation of SA through PVA‐g‐AAm membranes was found to be 19.65 kJ/mol. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of dextrin‐grafted polypropylene

We carried out the graft copolymerization of the water‐soluble natural polymer dextrin onto preirradiated polypropylene (PP) in an aqueous medium using benzoyl peroxide (BPO) as the radical initiator. PP was irradiated by γ rays from a Co⁶⁰ source at a constant dose rate of 3.40 kGy/h to introduce hydroperoxide linkages, which served as the sites for grafting. The graft copolymerization was studied as a function of different reaction parameters, and the maximum percentage grafting (P_g; 55%) of dextrin onto PP was obtained at optimum conditions of [BPO] = 5.165 × 10⁻² mol/L, temperature = 60°C in 120 min with 15 mL of water. Different grafting parameters, such as the percentage apparent grafting, percentage grafting, and percentage true grafting have been evaluated. The graft copolymers were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, and scanning electron microscopy. Swelling studies were carried out in pure, binary, ternary, and quaternary solvent systems composed of water, ethanol (EtOH), dimethyl sulfoxide (DMSO), and N,N‐dimethylformamide (DMF) at different ratios. The maximum swelling percentage PP‐g‐dextrin (both composite and true graft) was observed in pure DMSO and DMF followed by EtOH and water. Water‐retention studies of PP and PP‐g‐dextrin (both composite and true graft) were investigated at different time periods, temperatures, and pH values. The maximum percentage water retention of PP‐g‐dextrin (composite, 124%) was observed at 8 h and 50°C in a neutral medium (pH 7). © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

A chelating cellulose adsorbent for the removal of Cu(II) from aqueous solutions

Regenerated cellulose wood pulp was grafted with the vinyl monomer glycidyl methacrylate (GMA) using ceric ammonium nitrate as initiator and was further fuctionalised with imidazole to produce a novel adsorbent material, cellulose‐g‐GMA‐imidazole. All cellulose, grafted cellulose and functionalized cellulose grafts were physically and chemically characterized using a number of analytical techniques, including elemental analysis, Fourier transform infrared spectroscopy, thermogravimetric analysis, differential thermal analysis, and scanning electron microscopy. The cellulose‐g‐GMA material was found to contain 1.75 mmol g^?1 epoxy groups. These epoxy groups permitted introduction of metal binding functionality to produce the cellulose‐g‐GMA‐imidazole final product. Following characterization, a series of adsorption studies were carried out on the cellulose‐g‐GMA‐imidazole to assess its capacity in the removal of Cu²⁺ ions from solution. Cellulose‐g‐GMA‐imidazole sorbent showed an uptake of ～70 mg g^?1 of copper from aqueous solution. The adsorption process is best described by the Langmuir model of adsorption, and the thermodynamics of the process suggest that the binding process is mildly exothermic. The kinetics of the adsorption process indicated that copper uptake occurred within 30 min and that pseudo‐second‐order kinetics best describe the overall process. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 2006