Preparation and Gas Separation Properties of Metal‐Organic Framework Membranes

Continuous and intergrown metal‐organic framework (MOF) membranes, MIL‐100(In) (MIL represents Materials Institute Lavoisier), were prepared directly on porous anodic alumina oxide (AAO) membranes using an in situ crystallization method. The pore surface of MIL‐100(In) is conferred with polarity due to the presence of the 1, 3,5‐benzenetricarboxylic acid. The thickness of MIL‐100(In) membranes was tuned by varying the reactant concentration of indium chloride and 1, 3,5‐benzenetricarboxylic acid. Single gas permeation measurements on this MOF membrane indicate the large permeances of 0.90 × 10^–6 and 0.81 × 10^–6 mol · m^–2·s^–1·Pa^–1 for CO₂ and CH₄, and relatively high ideal selective factors of 3.75 and 3.38 for CO₂/N₂ and CH₄/N₂, respectively.     

Facile fabrication of g‐C3N4/MIL‐53(Al) composite with enhanced photocatalytic activities under visible‐light irradiation

A novel visible‐light‐driven g‐C₃N₄/MIL‐53(Al) composite photocatalyst was successfully prepared using a facile stirring method at room temperature. The g‐C₃N₄/MIL‐53(Al) composites were characterized and their effects on the photocatalytic activities for rhodamine B degradation were investigated. The g‐C₃N₄(20 wt%)/MIL‐53(Al) photocatalyst displayed optimal photocatalytic degradation efficiency, which was about five times higher than the photocatalytic activity of pure g‐C₃N₄. The improved photocatalytic performance of the g‐C₃N₄/MIL‐53(Al) photocatalyst was predominantly attributed to the efficient separation of electron–hole pairs and the low charge‐transfer resistance. g‐C₃N₄/MIL‐53(Al) also exhibited excellent stability and reusability. A proposed mechanism for the enhanced photocatalytic activity is also discussed based on the experimental results. Copyright © 2015 John Wiley & Sons, Ltd.     

Encapsulation of a Porous Organic Cage into the Pores of a Metal–Organic Framework for Enhanced CO2 Separation

We present a facile approach to encapsulate functional porous organic cages (POCs) into a robust MOF by an incipient‐wetness impregnation method. Porous cucurbit[6]uril (CB6) cages with high CO₂ affinity were successfully encapsulated into the nanospace of Cr‐based MIL‐101 while retaining the crystal framework, morphology, and high stability of MIL‐101. The encapsulated CB6 amount is controllable. Importantly, as the CB6 molecule with intrinsic micropores is smaller than the inner mesopores of MIL‐101, more affinity sites for CO₂ are created in the resulting CB6@MIL‐101 composites, leading to enhanced CO₂ uptake capacity and CO₂/N₂, CO₂/CH₄ separation performance at low pressures. This POC@MOF encapsulation strategy provides a facile route to introduce functional POCs into stable MOFs for various potential applications.     

Hydrophobic ionic liquid‐based ultrasound‐assisted extraction of magnolol and honokiol from cortex Magnoliae officinalis

The hydrophobic ionic liquid of [BMIM][PF₆] was successfully used for the ultrasound‐assisted extraction of hydrophobic magnolol and honokiol from cortex Magnoliae officinalis. To obtain the best extraction efficiencies, some ultrasonic parameters including the concentration of [BMIM][PF₆], pH, ultrasonic power and ultrasonic time were evaluated. The results obtained indicated that the [BMIM][PF₆]‐based ultrasound‐assisted extraction efficiencies of magnolol and honokiol were greater than those of the [BMIM][BF₄]‐based ultrasound‐assisted extraction (from 48.6 to 45.9%) and the traditional ethanol reflux extraction (from 16.2 to 13.3%). Furthermore, the proposed extraction method is validated by the recovery, correlation coefficient (R²) and reproducibility (RSD, n=5), which were 90.8–102.6, 0.9992–0.9998, and 1.6–5.4%, respectively.     

Confinement of Ionic Liquids in Nanocages: Tailoring the Molecular Sieving Properties of ZIF‐8 for Membrane‐Based CO2 Capture

Fine‐tuning of effective pore size of microporous materials is necessary to achieve precise molecular sieving properties. Herein, we demonstrate that room temperature ionic liquids can be used as cavity occupants for modification of the microenvironment of MOF nanocages. Targeting CO₂ capture applications, we tailored the effective cage size of ZIF‐8 to be between CO₂ and N₂ by confining an imidazolium‐based ionic liquid [bmim][Tf₂N] into ZIF‐8’s SOD cages by in‐situ ionothermal synthesis. Mixed matrix membranes derived from ionic liquid‐modified ZIF‐8 exhibited remarkable combinations of permeability and selectivity that transcend the upper bound of polymer membranes for CO₂/N₂ and CO₂/CH₄ separation. We observed an unusual response of the membranes to varying pressure, that is, an increase in the CO₂/CH₄ separation factor with pressure, which is highly desirable for practical applications in natural gas upgrading.     

Synthesis of TiO2 hollow spheres using binary ionic liquids as an electrocatalyst

Titanium dioxide (TiO₂ titania) hollow sphere was simply synthesized using various ionic liquids (ILs). The shape and size of TiO₂ particles were significantly different with the composition of ILs. This is mainly attributed to the interaction between organic solvent and IL at the interface leading to the formation of sphere. Among the binary ILs, [Bmim][BF₄] + [Omim][PF₆], [Bmim][BF₄] + [Omim][PF₆], and [Bmim][PF₆] + [Hmim][PF₆] were useful to prepare TiO₂ nanostructures with high surface area and anatase phase. Especially, [Bmim][BF₄] + [Omim][PF₆] was the most effective IL to synthesize an anatase TiO₂ hollow sphere.

     

The Synthesis of Anatase TiO2 Nanoparticles by Solvothermal Method using Ionic Liquid as Additive

The solvothermal reactions of Ti(OiPr)₄ in alcohol using ionic liquid as additive were investigated. In the presence of [BMIM][Cl], [BMIM][Br], [BMIM][NTf₂], [BMIM][SO₃Me], [BMIM][SO₄Me], or [BMIM][OTf] (BMIM = 1‐Butyl‐3‐methylimidazolium), pure anatase nanoparticles were obtained. The controlled hydrolysis of Ti(OiPr)₄ in the presence of ionic liquids to form titanium oxo clusters plays a key role in the formation of anatase nanostructures, and ionic liquids can be repeatedly used to synthesise anatase nanoparticles. However, in the presence of [BMIM][PF₆], [BMIM]₂[Ti(OH)₆] was obtained by an anion exchange reaction.     

Post‐Synthetic Reversible Incorporation of Organic Linkers into Porous Metal–Organic Frameworks through Single‐Crystal‐to‐Single‐Crystal Transformations and Modification of Gas‐Sorption Properties

The porous metal–organic framework (MOF) {[Zn₂(TCPBDA)(H₂O)₂]?30 DMF?6 H₂O}_n ( SNU‐30 ; DMF=N,N‐dimethylformamide) has been prepared by the solvothermal reaction of N,N,N′,N′‐tetrakis(4‐carboxyphenyl)biphenyl‐4,4′‐diamine (H₄TCPBDA) and Zn(NO₃)₂?6 H₂O in DMF/tBuOH. The post‐synthetic modification of SNU‐30 by the insertion of 3,6‐di(4‐pyridyl)‐1,2,4,5‐tetrazine (bpta) affords single‐crystalline {[Zn₂(TCPBDA)(bpta)]?23 DMF?4 H₂O}_n ( SNU‐31 SC ), in which channels are divided by the bpta linkers. Interestingly, unlike its pristine form, the bridging bpta ligand in the MOF is bent due to steric constraints. SNU‐31 can be also prepared through a one‐pot solvothermal synthesis from Zn^II, TCPBDA^4?, and bpta. The bpta linker can be liberated from this MOF by immersion in N,N‐diethylformamide (DEF) to afford the single‐crystalline SNU‐30 SC , which is structurally similar to SNU‐30 . This phenomenon of reversible insertion and removal of the bridging ligand while preserving the single crystallinity is unprecedented in MOFs. Desolvated solid SNU‐30′ adsorbs N₂, O₂, H₂, CO₂, and CH₄ gases, whereas desolvated SNU‐31′ exhibits selective adsorption of CO₂ over N₂, O₂, H₂, and CH₄, thus demonstrating that the gas adsorption properties of MOF can be modified by post‐synthetic insertion/removal of a bridging ligand.     

A Ga‐MIL‐53‐type Framework based on 1,4‐Phenylenediacetate Showing Subtle Flexibility

The new MOF Ga‐MIL‐53‐PDA [Ga(OH)(O₂C‐C₈H₈‐CO₂)] · H₂O ( 1 ) was synthesized by a hydrothermal reaction of gallium nitrate, 1,4‐phenylenediacetic acid (H₂PDA) and sodium hydroxide at 100 °C for 24 h. The product is a structural analogue of the archetypical MIL‐53 framework. Its crystal structure was determined by Rietveld refinement of powder X‐ray diffraction (PXRD) data. Furthermore 1,4‐phenylenedipropionic acid (H₂PDP) was employed for further synthesis, which resulted in the dense layered coordination polymers [Ga₂(OH)₄(O₂C‐C₁₀H₁₂‐CO₂)] ( 2 ) and [Ga(OH)(O₂C‐C₁₀H₁₂‐CO₂)] ( 3 ), for which accurate structural models could be established. All compounds were fully characterized and tested regarding potential breathing behavior. Most remarkably, Ga‐MIL‐53‐PDA showed a subtle flexibility upon de/‐rehydration also confirming its porosity, but no drastic structural changes were observed.     

Tunning CO2 Separation Performance of Ionic Liquids through Asymmetric Anions

This work aims to explore the gas permeation performance of two newly-designed ionic liquids, [C₂mim][CF₃BF₃] and [C₂mim][CF₃SO₂C(CN)₂], in supported ionic liquid membranes (SILM) configuration, as another effort to provide an overall insight on the gas permeation performance of functionalized-ionic liquids with the [C₂mim]⁺ cation. [C₂mim][CF₃BF₃] and [C₂mim][CF₃SO₂C(CN)₂] single gas separation performance towards CO₂, N₂, and CH₄ at T = 293 K and T = 308 K were measured using the time-lag method. Assessing the CO₂ permeation results, [C₂mim][CF₃BF₃] showed an undermined value of 710 Barrer at 293.15 K and 1 bar of feed pressure when compared to [C₂mim][BF₄], whereas for the [C₂mim][CF₃SO₂C(CN)₂] IL an unexpected CO₂ permeability of 1095 Barrer was attained at the same experimental conditions, overcoming the results for the remaining ILs used for comparison. The prepared membranes exhibited diverse permselectivities, varying from 16.9 to 22.2 for CO₂/CH₄ and 37.0 to 44.4 for CO₂/N₂ gas pairs. The thermophysical properties of the [C₂mim][CF₃BF₃] and [C₂mim][CF₃SO₂C(CN)₂] ILs were also determined in the range of T = 293.15 K up to T = 353.15 K at atmospheric pressure and compared with those for other ILs with the same cation and anion’s with similar chemical moieties.     

Multiscale Computational Study on the Adsorption and Separation of CO2/CH4 and CO2/H2 on Li+‐Doped Mixed‐Ligand Metal–Organic Framework Zn2(NDC)2(diPyNI)

The quantum mechanics (QM) method and grand canonical Monte Carlo (GCMC) simulations are used to study the effect of lithium cation doping on the adsorption and separation of CO₂, CH₄, and H₂ on a twofold interwoven metal–organic framework (MOF), Zn₂(NDC)₂(diPyNI) (NDC=2,6‐naphthalenedicarboxylate; diPyNI=N,N′‐di‐(4‐pyridyl)‐1,4,5,8‐naphthalenetetracarboxydiimide). Second‐order Moller–Plesset (MP2) calculations on the (Li⁺–diPyNI) cluster model show that the energetically most favorable lithium binding site is above the pyridine ring side at a distance of 1.817 Å from the oxygen atom. The results reveal that the adsorption capacity of Zn₂(NDC)₂(diPyNI) for carbon dioxide is higher than those of hydrogen and methane at room temperature. Furthermore, GCMC simulations on the structures obtained from QM calculations predict that the Li⁺‐doped MOF has higher adsorption capacities than the nondoped MOF, especially at low pressures. In addition, the probability density distribution plots reveal that CO₂, CH₄, and H₂ molecules accumulate close to the Li cation site. The selectivity results indicate that CO₂/H₂ selectivity values in Zn₂(NDC)₂(diPyNI) are higher than those of CO₂/CH₄. The selectivity of CO₂ over CH₄ on Li⁺‐doped Zn₂(NDC)₂(diPyNI) is improved relative to the nondoped MOF.     

Isobaric vapor–liquid equilibria for ethanol–water system containing different ionic liquids at atmospheric pressure

Isobaric vapor–liquid equilibrium (VLE) data for ethanol–water systems containing ionic liquids (ILs) 1-methyl-3-methylimidazolium dimethylphosphate ([MMIM][DMP]), 1-ethyl-3-methylimidazolium diethylphosphate ([EMIM][DEP]), 1-butyl-3-methylimidazolium bromide ([BMIM][Br]), 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]) and 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF₆]) at atmospheric pressure (101.32 kPa) were measured with a circulation still. The results showed that the VLE of ethanol–water systems in the presence of different ILs was obviously different from that of the IL-free system. All ILs studied showed a salting-out effect, which gave rise to a change of the relative volatility of ethanol, and even to an elimination of the azeotropic point. It was found that the salting-out effect followed the order of [BMIM][Cl] > [BMIM][Br] > [BMIM][PF₆] and [MMIM][DMP] > [EMIM][DEP], which was ascribed to the preferential solvation ability of the ions resulting from the dissociation of the IL.     

Enhancing the Water Stability of Al‐MIL‐101‐NH2 via Postsynthetic Modification

The resistance of metal–organic frameworks towards water is a very critical issue concerning their practical use. Recently, it was shown for microporous MOFs that the water stability could be increased by introducing hydrophobic pendant groups. Here, we demonstrate a remarkable stabilisation of the mesoporous MOF Al‐MIL‐101‐NH₂ by postsynthetic modification with phenyl isocyanate. In this process 86 % of the amino groups were converted into phenylurea units. As a consequence, the long‐term stability of Al‐MIL‐101‐URPh in liquid water could be extended beyond a week. In water saturated atmospheres Al‐MIL‐101‐URPh decomposed at least 12‐times slower than the unfunctionalised analogue. To study the underlying processes both materials were characterised by Ar, N₂ and H₂O sorption measurements, powder X‐ray diffraction, thermogravimetric and chemical analysis as well as solid‐state NMR and IR spectroscopy. Postsynthetic modification decreased the BET equivalent surface area from 3363 to 1555 m² g^?1 for Al‐MIL‐101‐URPh and reduced the mean diameters of the mesopores by 0.6 nm without degrading the structure significantly and reducing thermal stability. In spite of similar water uptake capacities, the relative humidity‐dependent uptake of Al‐MIL‐101‐URPh is slowed and occurs at higher relative humidity values. In combination with ¹H‐²⁷Al D ‐HMQC NMR spectroscopy experiments this favours a shielding mechanism of the Al clusters by the pendant phenyl groups and rules out pore blocking.     

Encapsulated Ionic Liquids for CO2 Capture: Using 1‐Butyl‐methylimidazolium Acetate for Quick and Reversible CO2 Chemical Absorption.

The potential advantages of applying encapsulated ionic liquid (ENIL) to CO₂ capture by chemical absorption with 1‐butyl‐3‐methylimidazolium acetate [bmim][acetate] are evaluated. The [bmim][acetate]‐ENIL is a particle material with solid appearance and 70 % w/w in ionic liquid (IL). The performance of this material as CO₂ sorbent was evaluated by gravimetric and fixed‐bed sorption experiments at different temperatures and CO₂ partial pressures. ENIL maintains the favourable thermodynamic properties of the neat IL regarding CO₂ absorption. Remarkably, a drastic increase of CO₂ sorption rates was achieved using ENIL, related to much higher contact area after discretization. In addition, experiments demonstrate reversibility of the chemical reaction and the efficient ENIL regeneration, mainly hindered by the unfavourable transport properties. The common drawback of ILs as CO₂ chemical absorbents (low absorption rate and difficulties in solvent regeneration) are overcome by using ENIL systems.     

Advances of Metal‐Organic Frameworks in Energy and Environmental Applications

Nowadays, energy shortage and environmental pollution issues are increasingly severe and urgent to be solved. The effective storage and use of environmentally friendly fuels and removal of harmful gases from the environment are great challenges and of great importance both for the environment protection and for human health. Porous metal‐organic frameworks (MOFs) are highly ordered crystalline materials formed by the self‐assembly process of metal ions and organic ligands. Their good features such as ultrahigh porosity, large surface area, structural diversity and functionalities make them promising candidates for applications in energy and environmental fields. MOF thin films and MOF composites have also been investigated to further enhance the properties and introduce new functionalities. This review provides an overview of the synthesis methods of pristine MOFs, MOF thin films and MOF composites, and significant advances of MOFs in energy and environment applications such as energy storage (H₂, CH₄), CO₂ capture and separation, adsorption removal and sensing of harmful gases in the environment.     

Novel imidazolium‐based poly(ionic liquid)s: preparation,characterization, and absorption of CO2

The development of novel materials for carbon dioxide (CO₂) capture is of great importance in resource utilization and environmental preservation. In this study, imidazolium‐based ionic liquids (ILs) with symmetrical ester and hydroxyl groups were prepared, and their corresponding polymer were synthesized by melt condensation polymerization. The structure and properties of the poly(ionic liquid)s (PILs) were characterized by proton nuclear magnetic resonance, gel permeation chromatograph, differential scanning calorimetry, X‐ray diffraction, and scanning electron microscopy. In addition, the CO₂ sorption behavior of the IL monomers and PILs were studied at a low pressure (648.4 mmHg CO₂) and under a temperature of 25°C using a thermogravimetric analyzer. The CO₂ sorption capacity of 1,3‐bis(2‐hydroxyl ethyl)‐imidazolium hexafluorophosphate ([HHIm]PF₆, 10 mol%) was the highest among all the IL monomers and PILs studied. This capacity is also much higher than those reflected of previously reported ILs. Moreover, the sorption equilibrium of [HHIm]PF₆ was achieved within a short time. Copyright © 2011 John Wiley & Sons, Ltd.     

Enhanced CO2 Adsorption Affinity in a NbO‐type MOF Constructed from a Low‐Cost Diisophthalate Ligand with a Piperazine‐Ring Bridge

A metal–organic framework (NPC‐6) with an NbO topology based on a piperazine ring‐bridged diisophthalate ligand was synthesized and characterized. The incorporated piperazine group leads to an enhanced adsorption affinity for CO₂ in NPC‐6, in which the CO₂ uptake is 4.83 mmol g^?1 at 293 K and 1 bar, ranking among the top values of CO₂ uptake on MOF materials. At 0.15 bar and 293 K, the NPC‐6 adsorbs 1.07 mmol g^?1 of CO₂, which is about 55.1 % higher than that of the analogue MOF NOTT‐101 under the same conditions. The enhanced CO₂ uptake combined with comparable uptakes for CH₄ and N₂ leads to much higher selectivities for CO₂/CH₄ and CO₂/N₂ gas mixtures on NPC‐6 than on NOTT‐101. Furthermore, an N‐alkylation is used in the synthesis of the PDIA ligand, leading to a much lower cost compared with that in the synthesis of ligands in the NOTT series, as the former does not require a palladium‐based catalyst and borate esters. Thus, we conclude that NPC‐6 is a promising candidate for CO₂ capture applications.     

Tuning Pore Size in Square‐Lattice Coordination Networks for Size‐Selective Sieving of CO2

Porous materials capable of selectively capturing CO₂ from flue‐gases or natural gas are of interest in terms of rising atmospheric CO₂ levels and methane purification. Size‐exclusive sieving of CO₂ over CH₄ and N₂ has rarely been achieved. Herein we show that a crystal engineering approach to tuning of pore‐size in a coordination network, [Cu(quinoline‐5‐carboxyate)₂]_n ( Qc‐5‐Cu ) ena+bles ultra‐high selectivity for CO₂ over N₂ (S_CN≈40 000) and CH₄ (S_CM≈3300). Qc‐5‐Cu‐sql‐β , a narrow pore polymorph of the square lattice ( sql ) coordination network Qc‐5‐Cu‐sql‐α, adsorbs CO₂ while excluding both CH₄ and N₂. Experimental measurements and molecular modeling validate and explain the performance. Qc‐5‐Cu‐sql‐β is stable to moisture and its separation performance is unaffected by humidity.     

Liquid structures of 1-butyl-3-methylimidazolium tetrafluoroborate and carbon dioxide mixtures by X-ray diffraction measurements

X-ray diffraction measurements for the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate, [BMIM][BF₄], mixed with CO₂ were carried out at high pressures using our developed polymer cell. The intermolecular distribution functions obtained for [BMIM][BF₄]–CO₂ mixtures showed that CO₂ molecules are preferentially solvated to the [BF₄]⁻ anion. The similar preferential solvation was previously observed in analogous 1-btuyl-3-methylimidazolium hexafluorophosphate, [BMIM][PF₆], with a different anion, which is in harmony with the present results in [BMIM][BF₄]–CO₂.     

Turning Redundant Ligands into Treasure: A New Strategy for Constructing MIL‐53(Al)@Nanoscale TiO2 Layers

A strategy for in situ fabrication of nanoscale‐thin layers of anatase TiO₂ coated on the metal–organic framework (MOF) material, MIL‐53(Al), is developed. The preparation conditions for crystallized TiO₂ are normally incompatible with the thermal and chemical stability of MOFs. Based on our strategy, we found that the redundant organic ligands (1,4‐benzenedicarboxylic acid, H₂BDC) within the pores of the as‐synthesized MOF play a key function in the protection and support of the framework during hydrothermal loading of the TiO₂ precursor, as well as in preventing the infiltration of the precursor into the pores. After annealing, a nanoscale‐thin layer of highly crystalline anatase TiO₂, with a thickness of 6–10 nm, was successfully attached to the external surface of the MIL‐53(Al) crystals, while the porous framework remains intact. The core–shell structure of the MOF@TiO₂ nanocomposite endows the resulting materials with additional optical response and enhanced moisture and chemical stability.