Compact ultra‐wideband slot antenna with three notched‐band characteristics

A very compact ultra‐wideband (UWB) slot antenna with three L‐shaped slots for notched‐band characteristics is presented in this article. The antenna is designed and fabricated using a new stepped slot with different size, integrated in the ground plane, and excited by a 50 Ω microstrip transmission line. The stepped slot is used to minimize the dimensions of the antenna and to achieve an impedance bandwidth between 2.65 and 11.05 GHz with voltage standing wave ratio (VSWR) less than 2. The length of the stepped slot is equal to a quarter wavelength to create a resonance in the desired frequency. Three L‐shaped slots with various sizes are etched in the ground plane to reject three frequency bands in C‐band (3.7‐4.2 GHz), WLAN (5.15‐5.825 GHz), and X‐band (7.25‐7.75 GHz), respectively. The notched‐band frequency can be controlled by changing the length of the L‐shaped slot. The proposed antenna has a very small size (20.25 × 8 × 1.27 mm³) compared with previous works. The measured and simulated results show a good agreement in terms of radiation pattern and impedance matching.     

Fork‐shaped patch printed ultra‐wideband slot antenna with dual band‐notched characteristics using metamaterial unit cells

In this article, a miniaturized fork‐shaped patch ultra‐wideband (UWB) planar wide‐slot antenna with dual band‐notched characteristics is proposed. With fork‐shaped patch, ultra‐wideband impedance matching from 3.1 to 13.2 GHz is easily achieved. Then, two novel and simple methods are applied to solve the difficulty for UWB slot antennas with fork‐shaped patch to realize band‐notched characteristics. By etching one pair of I‐shaped resonators on both branches of the fork‐shaped structure and adding a rectangular single split‐ring resonator in the rectangular openings of fork‐shaped patch, the wireless local area network (WLAN) band from 5.5 to 6.1 GHz and the International Telecommunication Union (ITU) 8 GHz band from 7.9 to 8.7 GHz are rejected, respectively. The coplanar waveguide‐fed UWB antenna is successfully designed, fabricated, and measured. The measured and simulated results show a good agreement. The antenna provides nearly stable radiation patterns, high gains and high radiation efficiency.     

Compact multiband planar monopole antenna for Bluetooth,LTE, and reconfigurable UWB applications including X‐band and Ku‐band wireless communications

In this article, a small‐printed Bluetooth/LTE/UWB/X‐band/Ku‐band monopole antenna with high rejection triple band‐notch is presented. Notched bands include WiMAX (IEEE802.16 3.30‐3.80 GHz), WLAN IEEE802.11a/h/j/n (5.15‐5.35 GHz, 5.25‐5.35 GHz, 5.47‐5.725 GHz, and 5.725‐5.825 GHz), and downlink satellite system (7.1‐7.9 GHz). By including inverted T‐shaped stub and etching two C‐shaped slots on the radiating patch, triple band‐notch function is obtained with measured high band rejection (VSWR = 14.59 at 3.69 GHz, VSWR = 39.40 at 5.42 GHz, and VSWR = 6.43 at 7.57 GHz) and covers a UWB useable fractional bandwidth of 157.75% (2.285‐19.35 GHz = 17.065 GHz). Reconfigurable characteristics are obtained using PIN diodes, which control the individual notched bands. Proposed antenna is printed on Rogers RT/duroid5880 substrate with compact dimensions of 20 × 22 mm². Proposed antenna finds its applications for Bluetooth, LTE, UWB, other multiple wireless applications for close range radar (8‐12 GHz) in X‐band, and satellite communication in Ku‐Band with omnidirectional pattern in H‐plane.     

A simple planar monopole UWB slot antenna with dual independently and reconfigurable band‐notched characteristics

An extremely simple and compact planar monopole ultrawideband (UWB) slot antenna with dual band‐notched characteristics is proposed. The antenna is composed of a circular radiation patch, a microstrip‐fed line, and a partial ground. By etching an arc‐shaped slot on the radiation patch and a C‐like slot on the feed line, dual notched frequency bands at 3.3–3.7 GHz for WiMAX and 5.15–5.825 GHz for WLAN are achieved. And, the two notched bands can be adjusted independently by varying the length of the slots. Moreover, the band‐notched characteristics can be reconfigurable by shorting the corresponding slots. So, the antenna is capable of operating in one of multiple modes which makes it an excellent candidate for UWB applications. Meanwhile, experimental results indicate that the antenna has an available impendence bandwidth from 2.9 to 11 GHz which covers the UWB frequency band, and nearly omnidirectional patterns, stable gains, small group delay in operating band except rejected bands. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:706–712, 2014.     

Compact UWB flexible elliptical CPW‐fed antenna with triple notch bands for wireless communications

A coplanar waveguide (CPW)‐fed flexible elliptical antenna with triple band notched characteristics is presented in this article. The designed antenna consists of an elliptical patch and slots incorporated CPW feed line to cover the bandwidth requirements for ultra‐wideband (UWB) applications. The designed UWB antenna has a fractional bandwidth of about 166.19% (1.20‐13 GHz) with a center frequency of 7.1 GHz in simulation and about 170.10% (1.05‐13 GHz) with a center frequency of 7.025 GHz in measurement. The overall dimension of the proposed flexible antenna is 45 × 35 × 0.6 mm³. The triple notched bands are realized by designing with circular shaped split‐ring‐resonators (SRRs) and defected ground structure (DGS). According to the measurement, first notched band (2.0? 2.70 GHz) is generated for rejecting 2.4 GHz WLAN by introducing a single circular ST‐SRR on the radiating patch. The second notch (3.45‐3.80 GHz) is obtained by embedding another circular ST‐SRR on the patch to mitigate the interference of 3.5 GHz Wi‐MAX system. Finally, due to presence of DGS, third notch (5.15‐6.20 GHz) is produced which suppresses the interference from 5.5 GHz Wi‐MAX and 5.2/5.8 GHz WLAN systems. The proposed antenna offers excellent performance in different flexible conditions that confirm its applicability on curved surfaces for UWB systems.     

Quad notch UWB antenna using combination of slots and split‐ring resonator

A novel coplanar waveguide fed UWB antenna with quad notch band characteristics has been proposed in this work. The antenna layout is designed based on a combination of well‐known geometrical shapes: a half ellipse patch, rectangle, and triangle. The shape of the ground plane is partially tapered rectangular. The overall dimension of the antenna is 41.5 × 32 mm. The antenna uses three U‐shaped slots at the top surface to create three notched band characteristics. A split‐ring resonator is then introduced at the bottom surface of the antenna. With the integration of split‐ring resonator at the bottom surface, an additional notch band at 7.25 to 7.75 (6.7%) GHz is created in the antenna. The designed antenna has an operating impedance bandwidth (VSWR ≤2) ranges from 3.03 to 12.34 GHz except in quad frequency stop bands of 3.3 to 3.7 (11.4%), 5.15 to 5.35 (3.8%), 5.725 to 5.825 (1.7%), and 7.25 to 7.75 (6.7%) GHz. The proposed antennas are successfully designed, prototyped, and measured. The simulated and measured results are extensively studied and discussed. Correlation between the time‐domain transmitting antenna input signal and the received antenna output signal is calculated in order to ensure that the proposed antenna can be used in pulse‐communication systems. This antenna finds applications in medical imaging, military radar systems, and other common UWB applications.     

Design and analysis of slot antenna with band notch function

In this article, the design, simulation, and construction of a novel wide rectangular slot antenna fed by a 50 Ω coplanar waveguide (CPW) are presented and investigated for multifunctional communication systems. The physical dimension of the antenna is 29 mm (length) × 32 mm (width) × 1.6 mm (thickness). Detailed simulations and experimental investigations are performed to understand its behavior and to optimize for 2.4 GHz wireless local area network (WLAN) and ultra wideband (UWB) operations. The proposed slot antenna is etched on an FR4 substrate with a thickness of 1.6 mm and relative permittivity of 4.4. To improve the impedance matching, a stepped stub structure with CPW feed technique is used. According to the measured results, the proposed antenna has a large bandwidth from 2.1 to 11.6 GHz for voltage standing wave ratio (VSWR) less than 2, totally satisfying the requirement of 2.4 GHz WLAN and UWB systems, while providing the required band notch function from 5.1 to 5.9 GHz. The study of time domain characteristics and surface current distributions also indicate the band‐notched function of the antenna. The radiation patterns display nearly omnidirectional performance and the antenna gain is stable except for the rejected frequency band (5.1–5.9 GHz). Moreover, group delays are within 1.5 ns except for the notch‐band. It is observed that the simulated and experimental results have good agreement with each other. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.     

Circularly polarized planar monopole antenna for ultrawideband applications

A broadband circularly polarized (CP) planar monopole antenna is proposed here for ultrawideband (UWB) communication. The antenna is composed of a modified annular ring patch fed by a tapered microstrip line and a rectangular semiground plane on the opposite side of the substrate. Capability of generating wide axial ratio bandwidth (ARBW) is another feature of the proposed antenna. Wide ARBW is achieved by introducing a rectangular slot and a stub in the ground plane. The CP antenna has an impressive ARBW of 5.52 GHz (81.42%, 4.02‐9.54 GHz) within the UWB frequency range (3.1‐10.6 GHz). Measured 10‐dB return loss bandwidth of the proposed antenna is 120.86% centered at 7.48 GHz (2.96‐12 GHz). The proposed antenna is well used for wireless local area network (5.2 and 5.8 GHz), Worldwide Interoperability for Microwave Access (5.5 GHz), and other wireless systems in C band as well as CP‐UWB antenna communication.     

A new broadband circularly polarized square‐slot antenna with low axial ratios

A new broadband circularly polarized (CP) square‐slot antenna with low axial ratios is proposed in this article. The antenna is comprised of an L‐shaped microstrip line with tapered section and a square‐slot ground plane with some stubs and slots, which are utilized as perturbations for the desirable antenna performance. By loading stubs and slots in the square‐slot ground plane, the 2‐dB axial ratio bandwidth (ARBW) and 10‐dB return loss bandwidth for the presented antenna can be markedly improved. The measured results show that its 2‐dB ARBW is 4.2 GHz (54.2% from 5.65 GHz to 9.85 GHz) and its 10‐dB return loss bandwidth is about 8.9 GHz (92.7% from 5.15 GHz to 14.05 GHz). The proposed antenna features compact structure and broad 2‐AR bandwidth which could completely cover the WLAN (5.725‐5.85 GHz) band. Therefore, the proposed antenna is suitable for circular polarization applications in C band.     

A low‐profile quad‐port UWB MIMO antenna using defected ground structure with dual notch‐band behavior

A compact (45 × 45 × 1.6 mm³) ultrawide‐band (UWB), multiple‐input multiple‐output (MIMO) design using microstrip line feeding is presented. The proposed design comprises four elliptical monopoles placed orthogonally on a cost‐effective FR‐4 substrate. In order to improve the impedance bandwidth and lessen the return loss of the MIMO antenna, defects in ground plane are created by etching symmetrical square slots and half‐rings. Moreover, a different method (of unsymmetrical H‐shaped slot with C‐shaped slot) was proposed into the patch to introduce dual‐band rejection performance from UWB at center frequency 5.5 GHz (covering lower WLAN as well as upper WLAN) and 7.5 GHz (X band). In addition, a stub is introduced at the edge of each defected ground structure to obtain isolation >–22 dB covering entire performing band from 2 to 16.8 GHz (where, S₁₁ < –10 dB). The proposed design has miniaturized size, very low envelop correlation coefficient less than 0.1, stable gain (2‐4 dBi except for notch bands). Furthermore, various MIMO performance parameters are within their specifications, such as diversity gain (= 10 dB), total active reflection coefficient (<–5 dB, and channel capacity loss (<0.35 bits/s/Hz). The presented design is optimized using the HFSS software, and fabricated design is tested using vector network analyzer. The experimental results are in good agreement with the simulation results.     

Design and development of enhanced bandwidth multi‐frequency slotted antenna for 4G‐LTE/WiMAX/WLAN and S/C/X‐band applications

A multi‐frequency rectangular slot antenna for 4G‐LTE/WiMAX/WLAN and S/C/X‐bands applications is presented. The proposed antenna is comprised of rectangular slot, a pair of E‐shaped stubs, and an inverted T‐shaped stub and excited using staircase feed line. These employed structures help to achieve multiband resonance at four different frequency bands. The proposed multiband slot antenna is simulated, fabricated and tested experimentally. The experimental results show that the antenna resonates at 2.24, 4.2, 5.25, and 9.3 GHz with impedance bandwidth of 640 MHz (2.17‐2.82 GHz) covering WiMAX (802.16e), Space to Earth communications, 4G‐LTE, IEEE 802.11b/g WLAN systems defined for S‐band applications. Also the proposed antenna exhibits bandwidth of 280 MHz (4.1‐4.38 GHz) for Aeronautical and Radio navigation applications, 80 MHz (4.2‐4.28 GHz) for uncoordinated indoor systems,1060 MHz (5.04‐6.1 GHz) for the IEEE 802.11a WLAN system defined for C‐band applications and 2380 MHz (7.9‐10.28 GHz) defined for X‐band applications. Further, the radiation patterns for the designed antenna are measured in anechoic chamber and are found to agree well with simulated results.     

Modified ground with 50 Ω step fed WLAN notch 2 × 2 MIMO UWB antenna

In this research paper, an optimized 2 × 2 MIMO UWB antenna (antenna‐E) with half circled radiators as well as 50 Ω step fed has been introduced. The proposed UWB MIMO antenna has been evolved from recent peer published papers that provide WLAN notch (5.15‐5.85GHz), ultra wide band width (3.1‐10.6 GHz) and again a very good isolation (?20 dB) also maintained. In this paper the evolutions have been derived from antenna‐A to antenna‐E. The Ultra wide band is achieved by using step feed line, cutting a metal strip on a partial ground plane, a rectangular slot underneath the feed line of each radiator in antenna‐E. A high isolation (?20 dB) is obtained by introducing two inverted Г shaped stubs in the ground plane. Both antenna‐D and antenna‐E maintain high isolation (?20 dB). But antenna‐E performs better isolation compared to antenna‐D. The notch at WLAN band (5.15‐5.85GHz) is achieved by etching rectangular C‐shaped slot on the both the radiators. In antenna‐E two radiators are placed horizontally where as in antenna‐D two radiators placed orthogonally. It has been observed that the dimension of final outcome (antenna‐E) is reduced by 33% compared to antenna‐D without compromising the overall performance of the antenna.     

Penta‐band notched ultra‐wideband monopole antenna loaded with electromagnetic bandgap‐structures and modified U‐shaped slots

In this article, a planar monopole penta‐notched ultra‐wideband (UWB) antenna is designed and investigated. Three notches (2.81 GHz radar surveillance, 3.38 GHz WiMAX, and 3.87 GHz C‐band satellite downlink) have been realized by integrating three modified U‐shaped slots on the radiating surface. Furthermore, to create two additional notches (2.33 GHz ISM band and 5.75 GHz WLAN), two meander line electromagnetic bandgap (EBG); one located near to the feed line and another on the radiating surface, have been introduced in the design. These unit cells play a fundamental role in generating notches at higher as well as lower frequencies. The proposed antenna possesses an overall size of 34.9 × 31.3 × 1.6 mm³ and has been designed over FR4 substrate. A 50 Ω microstrip line is used to feed the antenna. The antenna without any extra arrangement exhibits an impedance bandwidth of 7.6 GHz. A parametric analysis is studied in detail to observe the band rejection characteristics. The ANSYS HFSS simulation software is used for simulating the proposed design structures. For validation purpose, a prototype is fabricated and characterized. A very good agreement is achieved between simulated and measured results.     

Design of wideband antenna with band notch characteristics based on single notching element

In this article, a coplanar waveguide (CPW) fed planner monopole antenna with a compact size of 0.32λ × 0.30λ × 0.0056λ mm³ is presented. The radiator is fed with 50 Ω CPW feed line that provides impedance matching from 1.7 to 30 GHz for VSWR ≤2. In addition, three narrow bands are filtered out in the ultra‐wideband (UWB) range. The narrow notched bands are filtered for WiMAX (3.52‐4.2 GHz), WLAN (5.04‐5.40 GHz), and X band (8.22‐9.10 GHz) application. The rejecting bands are achieved by loading a single tri‐square ring resonator (SRR) on the backside of the feed line. The dimensions of SRR control the notch resonance frequencies. A single‐, dual‐, and tri‐notch frequencies have been achieved by using single‐, dual‐, and tri‐SRR, respectively. The measured results of antenna structures in the absence and presence of the SRR are compared with the simulations. The measured results validate the proposed design.     

Compact C‐shaped MIMO diversity antenna for quad band applications with hexagonal stub for isolation improvement

A compact MIMO antenna was proposed in this article. The designed antenna is compact in size with dimensions of 20 × 34 × 1.6 mm. In this proposed antenna model the patch consisting of two counter facing C‐shaped elements facing each other in which a hexagonal ring attached to a strip line which is placed in between the two C‐shaped patch acts as the stub. The novelty of the antenna elements lies isolation improvement by using the ground stub with the use of circular ring resonator. The proposed antenna operates in four bands in which 2.66 to 3.60 GHz (Wi‐Max, Wi‐Fi), 4.52 to 5.78 GHz (WLAN), 6.59 to 7.40 GHz (satellite communication), and 9.55 to 10.91 GHz and having bandwidth of 0.94, 1.26, 0.81, and 1.36 GHz at four bands. The envelope correlation coefficient is ECC ≤ 0.3 and diversity gain > 9.8 dB for the operating bands of antenna proposed. This antenna can work in the bands of Wi‐Max, Wi‐Fi, WLAN, satellite communication in X‐band and for radio location, and astronomy applications.     

Design of a microstrip fed printed monopole antenna for bluetooth and UWB applications with WLAN notch band characteristics

In this article, a microstrip fed printed dual band antenna for Bluetooth (2.4–2.484 GHz) and ultra‐wide band (UWB; 3.1–10.6 GHz) applications with wireless local area network (WLAN; 5.15–5.825 GHZ) band‐notch characteristics is proposed. The desired dual band characteristic is obtained by using a spanner shape monopole with rectangular strip radiating patch, whereas the band‐notch characteristics is created by a mushroom‐like structure. The Bluetooth and notch bands can easily be controlled by the geometric parameters of the rectangular strip and mushroom structure, respectively. The proposed antenna has been designed, fabricated, and tested. It is found that the proposed antenna yields both the Bluetooth and UWB performance in the frequency regions of 2.438 to 2.495 GHz and 3.10 to 10.66 GHz, respectively for |S₁₁| ≤ ?10 dB with an excellent rejection band of 5.14 to 5.823 GHz to prevent WLAN signals. The experimental results provide good agreement with simulated ones. Surface current distributions are used to analyze the effects of the rectangular strip and mushroom. The designed antenna exhibits nearly omnidirectional radiation patterns, stable gain along with almost constant group delay over the desired bands. Hence, the proposed antenna is expected to be suitable for both Bluetooth and UWB applications removing the WLAN band. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:66–74, 2015.     

Bandwidth enhancement of a circularly polarized tapered crossed slot antenna with corner parasitic directors

This paper presents a single‐feed wideband circularly polarized (CP) antenna with tapered crossed slots and corner directors. According to the multi‐mode resonance concept, the antenna uses two identical cross placed Vivaldi‐like tapered slots as the wideband radiating elements, and four rectangular parasitic patch directors are connected on each corner of the ground for further enhancing the bandwidth. A simple second‐order stepped microstrip line with a via on the other side of the substrate is used to feed the antenna. Two pairs of capacitors and inductors are placed on each slot to realize a 90° phase difference for CP operation. The proposed antenna is designed, fabricated and measured. Simulation results are in good agreement with the measured results that demonstrate a 10 dB impedance bandwidth (IMBW) from 1.98 to 5.71 GHz (3.73 GHz, 97.01%) and a 3 dB axial ratio bandwidth (ARBW) from 2.13 to 3.91 GHz (1.78 GHz, 58.94%). The antenna outperforms most of the reported cross slot antennas for its wide IMBW and ARBW.     

Ultrawideband circularly polarized antenna with dual band‐notched characteristics

This article presents an ultrawideband (UWB) crossed dipole antenna with circularly polarized (CP) and dual band‐notched characteristics. The proposed design is based on two orthogonal tapered dipoles for UWB CP operation and a square‐shaped cavity for high broadside gain over the entire operating bandwidth (BW). To generate dual band‐notched characteristics, two separated slots are inserted into each dipole's arm. This antenna yields measured impedance BW of 100% (3.2‐9.6 GHz) with dual‐band rejection centered at 5.2 and 5.8 GHz. Correspondingly, dual rejected bands are also observed in the original UWB CP band, which ranges from 3.2 to 8.2 GHz. Additionally, the proposed antenna exhibits high broadside gains better than 6.2 dBic and radiation efficiency greater than 82%.     

Implementation of hybrid fractal metamaterial inspired frequency band reconfigurable multiband antenna for wireless applications

In the present paper authors propose the design and analysis of a hepta band metamaterial inspired octagonal shape antenna using hybrid fractals for wireless applications. Multiband characteristics in the designed antenna is accomplished by introducing of slotted octagonal shape radiating part with hybrid fractal form of Moore curve and Koch curve and two SRR cells. The frequency band reconfigurability is obtained with aid of PIN diodes placed inside the strips connected between Moore curve (fused with centered Koch curve) and feedline. During ON mode of PIN diode antenna operates at seven microwave frequency S‐band WiMAX (3.4~3.69 GHz—IEEE 802.16e)/Lower C‐band terrestrial fixed and mobile broadband application (4.25~4.76 GHz)/C‐band WLAN (5.15~5.35/5.75~5.825 GHz—IEEE 802.11a] (5.4~5.9 GHz)/Lower X‐band Earth exploration‐satellite service ITU region 2 (7.9~8.4 GHz)/Upper X‐band Amateur satellite operating band (10.45~10.50 GHz)/Lower Ku‐band Radar communication application (13.25~13.75 GHz)/Middle Ku‐band Geostationary satellite service (14.2~14.5 GHz) covering various wireless applications. Proposed design exhibit hexa/hepta band features during OFF/ON mode of PIN diode. An acceptable gain, stable radiation characteristics, and good impedance matching are observed at all the resonant frequencies of the proposed structure.     

A UWB MIMO slot antenna using defected ground structures for high isolation

In this article, a multiple‐input‐multiple‐output (MIMO) antenna with high isolation is proposed for ultrawideband (UWB) applications. The proposed MIMO antenna consists of two symmetric slot antenna elements with quasi F‐shaped radiators and L‐shaped open‐slots to increase impedance bandwidth. To improve isolation at the lower band, a decoupling network, composed of a narrow slot and a fork‐shaped slot, is introduced in the common ground. The measured results show that the proposed antenna provides high isolation of better than 20 dB over the operating band from 3 to 10.9 GHz. The performances of the UWB MIMO antenna in terms of radiation patterns, peak gain, envelope correlation coefficient, mean effective gain, and diversity gain are also studied.