Total Contents and Sequential Extraction of Heavy Metals in Soils Irrigated with Wastewater,Akaki, Ethiopia

The Akaki River, laden with untreated wastes from domestic, industrial, and commercial sources, serves as a source of water for irrigating vegetable farms. The purpose of this study is to identify the impact of waste-water irrigation on the level of heavy metals and to predict their potential mobility and bioavailability. Zn and V had the highest, whereas Hg the lowest, concentrations observed in the soils. The average contents of As, Co, Cr, Cu, Ni, Zn, V, and Hg of both soils; and Pb and Se from Fluvisol surpassed the mean + 2 SD of the corresponding levels reported for their uncontaminated counterparts. Apparently, irrigation with waste water for the last few decades has contributed to the observed higher concentrations of the above elements in the study soils (Vertisol and Fluvisol) when compared to uncontaminated Vertisol and Fluvisol. On the other hand, Vertisol accommodated comparatively higher average levels of Cr, Cu, Ni, Zn, etc V, and Cd, whereas high contents of Pb and Se were observed in Fluvisol. Alternatively, comparable levels of Co and Hg were found in either soil. Except for Ni, Cr, and Cd in contaminated Vertisol, heavy metals in the soils were not significantly affected by the depth (0–20 and 30–50 cm). When the same element from the two soils was compared, the levels of Cr, Cu, Ni, Pb, Se, Zn, V, Cd at 0–20 cm; and Cr, Ni, Cu, Cd, and Zn at 30–50 cm were significantly different. Organic carbon (in both soils), CEC (Fluvisol), and clay (Vertisol) exhibited significant positive correspondences with the total heavy metal levels. Conversely, Se and Hg contents revealed perceptible associations with carbonate and pH. The exchangeable fraction was dominated by Hg and Cd, whereas the carbonate fraction was abounded with Cd, Pb, and Co. conversely, V and Pb displayed strong affinity to reducible fraction, where as Cr, Cu, Zn, and Ni dominated the oxidizable fraction. Cr, Hg, Se, and Zn (in both soils) showed preference to the residual fraction. Generally, a considerable proportion of the total levels of many of the heavy metals resided in non residual fractions. The enhanced lability is generally expected to follow the order: Cd > Co > Pb > Cu > Ni > Se > V and Pb > Cd > Co > Cu > Ni > Zn in Vertisol and Fluvisol, respectively. For the similar wastewater application, the soil variables influence the status and the distribution of the associated heavy metals among the different soil fractions in the study soils. Among heavy metals that presented relatively elevated levels and with potential mobility, Co, Cu, Ni (either soil), V (Vertisol), Pb, and Zn (Fluvisol) could pose health threat through their introduction into the food chain in the wastewater irrigated soils.     

Effects of wood bark and fertilizer amendment on trace element mobility in mine soils, Broken Hill, Australia: implications for mined land reclamation

Soil amendments can immobilize metals in soils, reducing the risks of metal exposure and associated impacts to flora, fauna and human health. In this study, soil amendments were compared, based on "closed system" water extracts, for reducing metal mobility in metal-contaminated soil from the Broken Hill mining center, Australia. Phosphatefertilizer (bovine bone meal, superphosphate, triple superphosphate, potassium orthophosphate) and pine bark (Pinus radiata) were applied to two soils (BH1, BH2) contaminated with mining waste. Both soils had near neutral to alkaline pH values, were sulfide- or sulfate-rich, and contained metal and metalloid at concentrations that pose high environmental risks (e.g., Pb = 1.25 wt% and 0.55 wt%, Zn = 0.71 wt% and 0.47 wt% for BH1 and BH2, respectively). The addition of fertilizers and/or pine bark to both soil types increased water extractable metals and metalloids concentrations (As, Cd, Cu, Fe, Mn, Pb, Sb, Zn) compared with nonamended soils. One or more of the elements As, Cd, Cu, Mn, Pb, and Zn increased significantly in extracts of a range of different soil+pine bark and soil+fertilizer+piner+pine bark tests in response to increased pine bark doses. By contrast, Fe and Sb concentrations in extracts did not change significantly with pine bark addition. Solution pH was decreased by phosphate fertilizers (except for bovine bone meal) and pine bark, and pine bark enhanced dissolved organic carbon. At least in the short-term, the application of phosphate fertilizers and pine bark proved to be an ineffective method for controlling metal and metalloid mobility in soils that contain admixtures of polymetallic, polymineralic mine wastes.     

Prediction of zinc, cadmium, lead, and copper availability to wheat in contaminated soils using chemical speciation, diffusive gradients in thin films, extraction, and isotopic dilution techniques

To predict the availability of metals to plants, it is important to understand both solution- and solid-phase processes in the soil, including the kinetics of metal release from its binding agent (ligand and/or particle). The present study examined the speciation and availability of Zn, Cd, Pb, and Cu in a range of well-equilibrated metal-contaminated soils from diverse sources using several techniques as a basis for predicting metal uptake by plants. Wheat (Triticum aestivum L.) was grown in 13 metal-contaminated soils and metal tissue concentrations (Zn, Cd, Pb, and Cu) in plant shoots were compared with total soil metal concentrations, total soluble metal, and free metal activities (pM2+) in soil pore waters, 0.01 M CaCl2-extractable metal concentrations, E values measured by isotope dilution, and effective metal concentrations, C(E), measured by diffusive gradients in thin films (DGT). In the DGT technique, ions are dynamically removed by their diffusion through a gel to a binding resin, while E values represent the isotopically exchangeable (labile) metal pools. Free metal activities (Zn2+, Cd2+, and Pb2+) in soil pore waters were determined using a Donnan dialysis technique. Plant Zn and Cd concentrations were highly related to C(E), while relationships for Zn and Cd with respect to the other measures of metals in the soils were generally lower, except for CaCl2-extractable Cd. These results suggest that the kinetically labile solid-phase pool of metal, which is included in the DGT measurement, played an important role in Zn and Cd uptake by wheat along with the labile metal in soil solution. Plant Pb concentrations were highly related to both soil pore water concentrations and C(E), indicating that supply from the solid phase may not be so important for Pb. Predictions of Cu uptake by wheat from these soils by the various measures of Cu were generally poor, except surprisingly for total Cu.     

Plant-available zinc and lead in mine spoils and soils at the mines of Spain, Iowa

To investigate the forms of Zn and Pb and their plant availability in mine spoil long after its abandonment, we studied seven sites in the Mines of Spain, near Dubuque, IA. Ores of Zn and Pb were mined from dolomitic limestone primarily during the 19th century, and there had been no subsequent remediation of metals-contaminated spoil. From both mine spoil and undisturbed areas, we collected root-zone soil samples as well as samples of the dominant ground-level, native plants, aniseroot [Osmorhiza longistylis (Torr.) DC.] and black snakeroot (Sanicular marilandica L.). We determined Zn and Pb concentrations in both the plant tissue and in the soil samples after strong-acid digestion, and we fractionated the solid-phase forms of Zn, Pb, and P in the soil samples by using sequential extraction. Concentrations of total Zn and Pb were 10- to 20-fold greater in the spoil than in the undisturbed soils. Plants growing in the mine spoil had Zn concentrations two to four times greater and Pb concentrations more than 26 times greater than did plants growing in the undisturbed soils. The highest concentrations of Zn and Pb were in the CBD-extractable and the residual fractions in both undisturbed and mine spoil samples. Although the mine spoil contained large amounts of P, Zn, and Pb were available for uptake by the two plant species in amounts proportional to Zn and Pb concentrations in the rooting zone.     

Multivariate statistics to investigate metal contamination in surface soil

The modification of soil composition in the urbanized area of Ankara due to wet-dry deposition and pollution-derived particles from the atmosphere is investigated by analyzing 120 surface soil samples, collected from the urbanized area and its un-urbanized surrounding, for major, minor and trace elements. Concentrations of elements from human activity (e.g. Cd, Pb, Cr, Zn, Cu and Ca) in the urbanized area were higher than their corresponding concentrations in global average soil and soil in un-urbanized areas outside the urbanized area. Metal contents in soil were very high in densely populated districts and around some industrial facilities. The only exception was Pb distribution, which was more dispersed, due to the nature of motor vehicle emissions. Alteration of the Cd, Zn, Cu and Cr content of soil was confined to the inhabited and industrial areas, whereas enrichment factors of these elements were close to unity in the remaining study area. Factor analysis identified two polluted soil factor associations. One factor includes elements, such as Zn and Cd, which had high factor scores in inhabited areas and the other factor (high loading of Pb) represents soil polluted by motor vehicle emissions.     

湘中某工业区农田重金属污染的初步研究

通过2年的定点调查,研究了湘中某工业区附近农田土壤、糙米中重金属含量状况;并对重金属在水稻植株中的含量分布,以及影响糙米中重金属含量的土壤因素进行了探讨。     

Phytoextraction of heavy metals by willows growing in biosolids under field conditions

Biosolids produced by sewage treatment facilities can exceed guideline thresholds for contaminant elements. Phytoextraction is one technique with the potential to reduce these elements allowing reuse of the biosolids as a soil amendment. In this field trial, cuttings of seven species/cultivars of Salix(willows) were planted directly into soil and into biosolids to identify their suitability for decontaminating biosolids. Trees were irrigated and harvested each year for three consecutive years. Harvested biomass was weighed and analyzed for the contaminant elements: As, Cd, Cu, Cr, Hg, Pb, Ni, and Zn. All Salix cultivars, except S. chilensis, growing in soils produced 10 to 20 t ha(-1) of biomass, whereas most Salix cultivars growing in biosolids produced significantly less biomass (<6 t ha(-1)). Salix matsudana (30 t ha(-1)) and S. × reichardtii A. Kerner (18 t ha(-1)) had similar aboveground biomass production in both soil and biosolids. These were also the most successful cultivars in extracting metals from biosolids, driven by superior biomass increases and not high tissue concentrations. The willows were effectual in extracting the most soluble/exchangeable metals (Cd, 0.18; Ni, 0.40; and Zn, 11.66 kg ha(-1)), whereas Cr and Cu were extracted to a lesser degree (0.02 and 0.11 kg ha(-1)). Low bioavailable elements, As, Hg, and Pb, were not detectable in any of the aboveground biomass of the willows.     

Major and trace elements of selected pedons in the USA

Few studies of soil geochemistry over large geographic areas exist, especially studies encompassing data from major pedogenic horizons that evaluate both native concentrations of elements and anthropogenically contaminated soils. In this study, pedons (n = 486) were analyzed for trace (Cd, Co, Cr, Cu, Hg, Mn, Ni, Pb, Zn) and major (Al, Ca, Fe, K, Mg, Na, P, Si, Ti, Zr) elements, as well as other soil properties. The objectives were to (i) determine the concentration range of selected elements in a variety of U.S. soils with and without known anthropogenic additions, (ii) illustrate the association of elemental source and content by assessing trace elemental content for several selected pedons, and (iii) evaluate relationships among and between elements and other soil properties. Trace element concentrations in the non-anthropogenic dataset (NAD) were in the order Mn > (Zn, Cr, Ni, Cu) > (Pb, Co) > (Cd, Hg), with greatest mean total concentrations for the Andisol order. Geometric means by horizon indicate that trace elements are concentrated in surface and/or B horizons over C horizons. Median values for trace elements are significantly higher in surface horizons of the anthropogenic dataset (AD) over the NAD. Total Al, Fe, cation exchange capacity (CEC), organic C, pH, and clay exhibit significant correlations (0.56, 0.74, 0.50, 0.31, 0.16, and 0.30, respectively) with total trace element concentrations of all horizons of the NAD. Manganese shows the best inter-element correlation (0.33) with these associated total concentrations. Total Fe has one of the strongest relationships, explaining 55 and 30% of the variation in total trace element concentrations for all horizons in the NAD and AD, respectively.     

The characterization of total and leachable metals in foundry molding sands

Waste molding sands from the foundry industry have been successfully used as a component in manufactured soils, but concern over metal contamination must be addressed before many states will consider this beneficial use. Since there is little data available on this topic, the purpose of this study was to characterize total and leachable metals from waste molding sands. A total elemental analysis for Ag, Al, As, B, Ba, Be, Cd, Co, Cr, Cu, Fe, Mg, Mn, Mo, Ni, Pb, Sb, V, and Zn was conducted on 36 clay-bonded and seven chemically bonded molding sands. Total metal concentrations in the molding sands were similar to those found in agricultural soils. The leaching of metals (i.e. Ag, As, Ba, Be, Cd, Cr, Cu, Ni, Pb, Sb, and Zn) was assessed via the toxicity characteristic leaching procedure (TCLP), synthetic precipitation leaching procedure (SPLP), and ASTM water leach test. Based on the TCLP data, none of the 43 molding sands would meet the Resource Conservation and Recovery Act (RCRA) characteristic for toxicity due to high Ag, As, Ba, Cd, Cr, and Pb. Compared to the TCLP results, the metal concentrations were generally lower in the SPLP and ASTM extracts, which is likely related to the buffering capacity of the extraction fluids.     

On-farm evaluation of aluminum sulfate (alum) as a poultry litter amendment: effects on litter properties

Aluminum sulfate [alum; Al2(SO4)3] amendment of poultry litters has been suggested as a best management practice to help reduce the potential environmental effects of poultry production. Past research has shown that alum treatment reduced NH3 emissions from litters, decreased the loss in runoff of P and trace metals from litter-amended soils, improved poultry health, and reduced the costs of poultry production. We conducted a large scale, "on-farm" evaluation of alum as a poultry (broiler) litter amendment on the Delmarva peninsula to determine the effect of alum on (i) litter properties and elemental composition and (ii) the solubility of several elements in litter that are of particular concern for water quality (Al, As, Cu, P, and Zn). Alum was applied over a 16-mo period to 97 poultry houses on working poultry farms; 97 houses on other farms served as controls (no alum). Litter samples were analyzed initially and after approximately seven alum applications. We found that alum decreased litter pH and the water solubility of P, As, Cu, and Zn. Alum-treated houses also had higher litter total N, NH4-N, and total S concentrations and thus a greater overall fertilizer value than litters from the control houses. Higher litter NH4-N values also suggest that alum reduced NH3 losses from litters. Thus, alum appears to have promise as a best management practice (BMP) for poultry production. Future research should focus on the long-term transformations of P, Al, As, Cu, and Zn in soils amended with alum-treated litters.     

Heavy metal distribution and chemical speciation in tailings and soils around a Pb-Zn mine in Spain

Soil pollution by lead, zinc, cadmium and copper was characterized in the mine tailings and surrounding soils (arable and pasture lands) of an old Spanish Pb-Zn mine. Sixty soil samples were analyzed, determining the total metal concentration by acid digestion and the chemical fractionation of Pb and Zn by the modified BCR sequential extraction method. Samples belonging to mine waste areas showed the highest values, with mean concentrations of 28,453.50 mg kg(-1) for Pb, 7000.44 mg kg(-1) for Zn, 20.57 mg kg(-1) for Cd and 308.48 mg kg(-1) for Cu. High concentrations of Pb, Zn and Cd were found in many of the samples taken from surrounding arable and pasture lands, indicating a certain extent of spreading of heavy metal pollution. Acidic drainage and wind transport of dust were proposed as the main effects causing the dispersion of pollution. Sequential extraction showed that most of the Pb was associated with non-residual fractions, mainly in reducible form, in all the collected samples. Zn appeared mainly associated with the acid-extractable form in mine tailing samples, while the residual form was the predominant one in samples belonging to surrounding areas. Comparison of our results with several criteria reported in the literature for risk assessment in soils polluted by heavy metals showed the need to treat the mine tailings dumped in the mine area.     

Use of diammonium phosphate to reduce heavy metal solubility and transport in smelter-contaminated soil

Phosphate treatments can reduce metal dissolution and transport from contaminated soils. However, diammonium phosphate (DAP) has not been extensively tested as a chemical immobilization treatment. This study was conducted to evaluate DAP as a chemical immobilization treatment and to investigate potential solids controlling metal solubility in DAP-amended soils. Soil contaminated with Cd, Pb, Zn, and As was collected from a former smelter site. The DAP treatments of 460, 920, and 2300 mg P kg-1 and an untreated check were evaluated using solute transport experiments. Increasing DAP decreased total metal transported. Application of 2300 mg P kg-1 was the most effective for immobilizing Cd, Pb, and Zn eluted from the contaminated soil. Metal elution curves fitted with a transport model showed that DAP treatment increased retardation (R) 2-fold for Cd, 6-fold for Zn, and 3.5-fold for Pb. Distribution coefficients (Kd) increased with P application from 4.0 to 9.0 L kg-1 for Cd, from 2.9 to 10.8 L kg-1 for Pb, and from 2.5 to 17.1 L kg-1 for Zn. Increased Kd values with additional DAP treatment indicated reduced partitioning of sorbed and/or precipitated metal released to mobile metal phases and a concomitant decrease in the concentration of mobile heavy metal species. Activity-ratio diagrams indicated that DAP decreased solution Cd, Pb, and Zn by forming metal-phosphate precipitates with low solubility products. These results suggest that DAP may have potential for protecting water resources from heavy metal contamination near smelting and mining sites.     

Characteristics of slag, fly ash and deposited particles during melting of dewatered sewage sludge in a pilot plant

This study examines slag, fly ash, and deposited particles during melting of dewatered sewage sludge in a pilot plant. In addition, the chemical composition of particles in flue gas was simulated using a thermodynamics program, namely FACTSage 5.2. The results showed that the main components of slag were Al, Fe, Ca, P and Si; the minor components were Na, K, Mg, Cu, and Zn. The main chemical compound of slag was Ca4(Mg,Fe)5(PO4)6. For fly ash particles, heavy metals with the highest concentrations were in the order of Zn and As, Pb, Cu, and Cd, respectively. For non-heavy metals, Al, Fe and P were also found in significant amounts. The majority of deposited particles were composed of elements of Zn, P, S, Na, Fe, Al, Si, and Ca and such chemical compounds as Zn3(PO4)2, AlPO4, FePO4 and Fe(OH)3 while the minority consisted of elements of As, Cu, and Pb. Moreover, the compositions of deposited particles in each chamber differed due to different flue gas temperatures inside. In the secondary chamber at 760 degrees C, the amounts of Fe and Al were higher than Zn, whereas, in the other chambers (600-400 degrees C), the amount of Zn was higher. In other words, at the lower temperature the deposition of Zn was higher than the deposition of Fe and Al. In the water cooling section, volatile elements (i.e. Zn, As, Cu, Pb) were found in the highest concentrations due to a big difference in temperature between the wall surface and flue gas. From the simulation results, most of the elements in the gas phase were found to be chloride compounds, whereas those in the solid phase were in the form of oxide, sulfate, and phosphate compounds.     

In situ stabilization of soil lead using phosphorus and manganese oxide: influence of plant growth

In situ stabilization of Pb contaminated soils can be accomplished by adding P and Mn(IV) oxide. However, the long-term efficacy of in situ stabilization under continual P removal through plant growth is unknown. Moreover, the effects these treatments have on phytoavailability of other metals (Cd and Zn) commonly associated with Pb in soil are not well understood. Greenhouse experiments using sudax [Sorghum vulgare (L.) Moench] and Swiss chard [Beta vulgaris (L.) Koch] were carried out to evaluate the effects of plant growth on soil Pb bioavailability to humans after addition of P and other amendments, and the effects of these treatments on Pb, Cd, and Zn phytoavailability in three metal-contaminated soils. Eight treatments were used: zero P; 2500 mg of P as triple superphosphate (TSP); 5000 mg of P as TSP or phosphate rock (PR); 5000 mg of Mn oxide/kg; and combinations of Mn oxide and P as TSP or PR. The addition of P and/or Mn oxide significantly reduced bioavailable Pb, as measured by the physiologically based extraction test (PBET), in soils compared with the control even after extensive cropping. The PBET data also suggested that removal of P from soluble P sources by plants could negate the beneficial effects of P on bioavailable Pb, unless sufficient soluble P was added or soluble P was combined with Mn oxide. In general, Ph, Cd, and Zn concentrations in shoot tissues of sudax and Swiss chard were reduced significantly by TSP and did not change with the addition of PR. The combination of PR and Mn oxide significantly reduced Pb concentrations in plants compared with the control.     

Impact of unconfined sulphur-mine waste on a semi-arid environment (Almería, SE Spain)

Thirty-five soil samples were taken from unconfined mine waste, stream sediments, and surfaces unoccupied by mining and presumably unaffected by it, in a sulphur-mining zone surrounded by carbonate material and characterized by a semi-arid climate with short torrential storms. These samples were analysed and the results compared to estimate the spread of pollution in the landscape and to assess potential environmental risk. The mean concentrations of S, Zn, Cd, Pb, and As in mine waste were between 3.5-fold (As) and 50-fold (S) greater than unaffected soils. Oxidation of S led to a sharp drop in pH, strong weathering of minerals, and solubilisation of the constituent elements, forming a toxic acidic mine drainage with highly concentrated pollutants that were discharged into the drainage channels. Successive acid mine drainage into the soil on the valley floor spreads acidification and pollution downstream. The high carbonate content in surrounding soils played an important role in the increase of the pH and precipitation of S, Pb, and Al of the affected soils. Meanwhile, high mobility of Zn, Cd and As under basic conditions and a low Fe concentration explain the broad spread of these elements, as high concentrations were detected in soil more than 2000 m from the source. Only the soil solutions from near the waste dump (first 500 m) were highly phytotoxic, and moderately phytotoxic from 500 to 1500 m away. The concentration of pollutants in the leachates was clearly higher than in soil solutions, even in the soils located over 2000 m from the source, implying that the size of the polluted area will increase with time.     

Dissolution of trace element contaminants from two coastal plain soils as affected by pH

Trace element mobility in soils depends on contaminant concentration, chemical speciation, water movement, and soil matrix properties such as mineralogy, pH, and redox potential. Our objective was to characterize trace element dissolution in response to acidification of soil samples from two abandoned incinerators in the North Carolina Coastal Plain. Trace element concentrations in 11 soil samples from both sites ranged from 2 to 46 mg Cu kg(-1), 3 to 105 mg Pb kg(-1), 1 to 102 mg Zn kg(-1), 3 to 11 mg Cr kg(-1), < 0.1 to 10 mg As kg(-1), and < 0.01 to 0.9 mg Cd kg(-1). Acidified CaCl2 solutions were passed through soil columns to bring the effluent solution to approximately pH 4 during a 280-h flow period. Maximum concentrations of dissolved Cu, Pb, and Zn at the lowest pH of an experiment (pH 3.8-4.1) were 0.32 mg Cu L(-1), 0.11 mg Pb L(-1), and 1.3 mg Zn L(-1) for samples from the site with well-drained soils, and 0.25 mg Cu L(-1), 1.2 mg Pb L(-1), and 1.4 mg Zn L(-1) for samples from the site with more poorly drained soils. Dissolved Cu concentration at pH 4 increased linearly with increasing soil Cu concentration, but no such relationship was found for Zn. Dissolved concentrations of other trace elements were below our analytical detection limits. Synchrotron X-ray absorption near edge structure (XANES) spectroscopy showed that Cr and As were in their less mobile Cr(III) and As(V) oxidation states. XANES analysis of Cu and Zn on selected samples indicated an association of Cu(II) with soil organic matter and Zn(II) with Al- and Fe-oxides or franklinite.     

Response of soil microbiological activities to cadmium,lead, and zinc salt amendments

Heavy metal pollution of soil has been recognized as a major factor impeding soil microbial processes. From this perspective, we studied responses of the soil biological activities to metal stress simulated by soil amendment with Zn, Pb, and Cd chlorides. The amounts of heavy metal salts added to five metal-polluted soils and four nonpolluted soils were selected to match the total metal concentrations typically found in polluted soils of the Silesia region of Poland. From the perspective of soil quality, metal mobility in amended soils could not be described by simple functions of pH or organic matter. Reaction of Pb with the soil caused strong immobilization with less than 1% of the Pb amendment recovered by 0.01 M CaCl2 extractions. Immobilization of Cd was also significant, whereas immobilization of the Zn amendment was much weaker than that of Cd or Pb. The Zn amendment had substantial inhibitory effect on soil dehydrogenase, acid and alkaline phosphatase, arylsulfatase, urease, and nitrification potential. Generally, Cd and Pb had limited or stimulatory effect on most of these biological activities, with an exception of Pb strongly inhibiting soil urease. The effect of the metal amendments on biological activities could not be satisfactorily accounted for by metal toxicity because no strong relationship was observed between extractable metal content and the degree of inhibition. The Zn amendment had a significant effect on soil pH, resulting in confounding effects of pH and Zn toxicity on activities. Metal amendment experiments seem to be of limited utility for meaningful assessment of metal contamination effects on soil quality.     

Assessment of tropical suburban surface soils contamination from Jengka,Malaysia

Heavy metals in suburban soils pose both indirect and direct health risks. This study assessed the concentrations of Cr, Zn, Pb, and Cd in Jengka (Malaysia) suburban soil and estimated the human health risk. Health risk assessment (HRA) was utilized to assess non-cancer and cancer risks. The concentrations of heavy metals increased in the following order: Cd < Zn < Cr < Pb. The heavy metals were found to be divided into two components using principal component analysis (PCA), with PC1 comprising Pb and Cd and PC2 containing Zn and Cr. PC1 originates from anthropogenic sources, while PC2 is often from mixed anthropogenic and natural sources. Despite having the lowest mean concentration, Cd was enriched based on the geo-accumulation index (Igeo) and enrichment factor (EF). Average hazard index values were below the acceptable threshold (HI < 1) for dermal and inhalation pathways suggesting a low non-cancer risk. Jengka suburban soil had total lifetime cancer risk values slightly higher than the acceptable threshold (1 × 10⁻⁵). Skin contact was the most prominent contributing exposure pathway for both non-carcinogenic and carcinogenic risks. This study suggests that heavy metal bioactivity levels be used to make a plausible HRA of heavy metal pollution in suburban soils.     

Germination,Growth, and Nodulation of Sesbania rostrata Grown in Pb/Zn Mine Tailings

Sesbania rostrata in pure and amended Pb/Zn tailings. About 90% of seeds of S. rostrata germinated in pure Pb/Zn tailings, which contained high concentrations of Pb, Zn, Cu, and Cd. Although seedling growth suffered from the adverse environment of Pb/Zn tailings, they became established on tailings stands, in the greenhouse, as well as on the actual tailings dam, and completed their life cycle in 4 months. Dry matter production and nitrogen accumulation was 3200 kg/ha and 69.4 kg/ha, respectively in the actual tailings dam. Applying inorganic fertilizer to Pb/Zn tailings led to no obvious improvement in growth and nodulation of S. rostrata, while tailings amended by river sediment or domestic refuse rich in organic matter improved the growth and nodulation of the species. Azorhizobium caulinodans survived and formed N-fixing stem and root nodules in S. rostrata grown in pure Pb/Zn tailings with a nodule biomass exceeding 300 mg fresh matter per plant.     

Heavy metal release from contaminated soils: comparison of column leaching and batch extraction results

Heavy metals in soils may adversely affect environmental quality. In this study, we investigated the release of Zn, Cd, Pb, and Cu from four contaminated soils by column leaching and single and sequential batch extractions. Homogeneously packed soil columns were leached with 67 mL/g 10(-2) M CaCl2 to investigate the exchangeable metal pool and subsequently with 1400 mL/g 10(-2) M CaCl2 adjusted to pH 3 to study the potential of metal release in response to soil acidification. In two noncalcareous soils (pH 5.7 and 5.1), exchange by Ca resulted in pronounced release peaks for Zn and Cd that were coupled to the exchange of Mg by Ca, and 40 to 70% of total Zn and Cd contents were rapidly mobilized. These amounts compared well with exchangeable pools determined in single and sequential batch extractions. In two soils with near-neutral pH, the effluent concentrations of Zn and Cd were several orders of magnitude lower and no pronounced elution peaks were observed. This behavior was also observed for Cu and Pb in all four soils. When the soils were leached at pH 3, the column effluent patterns reflected the coupling of CaCO3 dissolution (if present) and other proton buffering reactions, proton-induced metal release, and metal-specific readsorption within the soil column. Varying the flow rate by a factor of five had only minor effects on the release patterns. Overall, Ca exchange and subsequent acidification to pH 3 removed between 65 and 90% of total Zn, Cd, Pb, and Cu from the four contaminated soils.